Nach Upgrade 0.2.1 -> 0.3.0: Anrufer kriegen kein Rufsignal

Sidebar Sidebar
Upgrade 3CX to v18 and get it hosted free!
S

scamp_

Neuer User
Mitglied seit
3 Dez 2005
Beiträge
9
Punkte für Reaktionen
0
Punkte
0
Hallo,

ich habe hier ein sehr suspektes Problem.

Folgendes Setup: 3x HFC, davon die ersten beiden extern, der dritte intern als NT. Daran dann ISDN-Telefone logischerweise.

Ich habe ein Upgrade von 0.2.1 auf 0.3.0 gemacht (via install-misdn-mqueue). Seitdem bekommen externe Anrufer kein Rufzeichen mehr, sondern hören stattdessen Stille, während es bei mir intern klingelt. Sobald ich intern abnehme, ist alles normal und das Gespräch verbunden.

Anders gesagt: Offensichtlich wird der B-Kanal viel zu früh, nämlich sofort statt nach interner Annahme, aufgebaut.

Logtechnisch sieht das dann so aus:

-- Executing Ringing("mISDN/1-1", "") in new stack
-- Executing Dial("mISDN/1-1", "misdn/3/200|90|tT") in new stack
-- Called 3/200
-- mISDN/3-u17 answered mISDN/1-1

Die letzte Zeile ist dreckig gelogen. Die kommt bereits, während mISDN/3 nur klingelt, aber niemand abgehoben hat.

Es sieht so aus, als würde mISDN asterisk signalisieren, dass der Anruf angenommen wurde, wenn in Wirklichkeit von misdn auf einem NT-Port nur geringt wird.

misdn.conf ist ziemlich defaultig:

[intern]
ports=3
context=intern

[extern1]
ports=1
context=extern1
msns=*

[extern2]
ports=2
context=extern2
msns=*

Die zugehörige extensions.conf ist auch ziemlich unspektakulär:

[extern1]
exten => meinerufnummer,1,Dial(misdn/3/200,90,tT)
exten => meinerufnummer,2,Hangup

Nach einem Downgrade auf 0.2.1 ohne irgendwelche sonstigen Änderungen ist wieder alles normal.

Man kann es sich fast denken - ich bin ratlos und bräuchte Hilfe :)

Hier noch ein vollständiges Log - die Rufnummer des Anrufers ist durch "externerteilnehmer", die angerufene MSN nur "MSN" ersetzt.

P[ 1] MGMT: SSTATUS: L1_ACTIVATED
P[ 1] I IND :SETUP oad:externerteilnehmer dad:MSN
P[ 1] read_config: Getting Config
P[ 1] config_jb: Called
P[ 1] I SEND:pROCEEDING oad:0externerteilnehmer dad:MSN
P[ 1] --> bc_state:BCHAN_CLEANED
P[ 1] Sending msg, prim:30280 addr:0 dinfo:2000c
-- Executing Ringing("mISDN/1-1", "") in new stack
P[ 1] * IND : Indication [3] from MSN
P[ 1] --> * IND : ringing pid:28
P[ 1] I SEND:ALERTING oad:0externerteilnehmer dad:MSN
P[ 1] --> bc_state:BCHAN_SETUP
P[ 1] Sending msg, prim:30180 addr:0 dinfo:2000c
P[ 1] --> incoming_early_audio off
P[ 1] --> * SEND: State Ring pid:28
-- Executing Dial("mISDN/1-1", "misdn/3/200|90|tT") in new stack
P[ 3] read_config: Getting Config
P[ 3] config_jb: Called
P[ 3] * CALL: 3/200
P[ 3] --> * dad:200 tech:mISDN/3-u17 ctx:Intern
P[ 3] update_config: Getting Config
P[ 3] I SEND:SETUP oad:0externerteilnehmer dad:200
P[ 3] --> bc_state:BCHAN_CLEANED
P[ 3] I IND :NEW_L3ID oad:0externerteilnehmer dad:200
P[ 3] bchannel_activate: BC Not properly upsetted (state:BCHAN_CLEANED) addr:50010302
P[ 3] --> * SEND: State Dialing pid:29
-- Called 3/200
-- mISDN/3-u17 answered mISDN/1-1
P[ 1] * ANSWER:
P[ 1] --> ECHO OFF
P[ 1] I SEND:CONNECT oad:0externerteilnehmer dad:MSN
P[ 1] --> bc_state:BCHAN_ACTIVATED
P[ 1] Sending msg, prim:30780 addr:0 dinfo:2000c
P[ 1] bchannel_activate: BC Not properly upsetted (state:BCHAN_ACTIVATED) addr:50010102
-- Attempting native bridge of mISDN/1-1 and mISDN/3-u17
P[ 1] I SEND: Making conference with Number:57
P[ 1] I Send: BRIDGE from:1 to:3
P[ 1] --> bc_addr:50010102
P[ 1] MGMT: SSTATUS: L2_ESTABLISH
P[ 1] Joining bc:50010102 in conf:57
P[ 3] --> bc_addr:50010302
P[ 1] * Makeing Native Bridge between 0externerteilnehmer and 0externerteilnehmer
P[ 1] bchannel_activate: BC Not properly upsetted (state:BCHAN_BRIDGED) addr:50010102
P[ 1] I IND :CONNECT_ACKNOWLEDGE oad:0externerteilnehmer dad:MSN
P[ 1] bchannel_activate: BC Not properly upsetted (state:BCHAN_BRIDGED) addr:50010102
P[ 3] I IND :ALERTING oad:0externerteilnehmer dad:200
P[ 1] * IND : Indication [3] from MSN
P[ 1] --> * IND : ringing pid:28 but Connected, so just send TONE_ALERTING without state changes
-- Attempting native bridge of mISDN/1-1 and mISDN/3-u17
 
Das problem ist in 0.3.1-rc5 reingekommen, kannst du bitte bei bugs.beronet.com nen report dafür öffnen, behebe ich morgen sofort.

Danke!
 
habe ich bereits gefixt. bitte die aktuellste 0.3.1-rc6 installieren. Du kannst dazu einfach in deinem install-misdn-mqueue verzeichniss ein "rm -rf chan_misdn*" machen und dann make install eintippen, das sollte die neueste version ziehen.
 
Wow, das ging fix. Danke!

Ich probier das dann gleich mal aus und erstatte Bericht.
 
Ok, das funktioniert soweit - allerdings scheint das ziemlich unstable zu sein. Nach ein paar eingehend/ausgehenden Anrufen scheint misdn irgendwann komplett zu hängen.

P[ 3] I SEND:SETUP_ACKNOWLEDGE oad:200 dad:
P[ 3] --> bc_state:BCHAN_CLEANED
P[ 3] I IND :DISCONNECT oad:200 dad:
P[ 3] I SEND:RELEASE oad:200 dad:
P[ 3] --> bc_state:BCHAN_RELEASE
P[ 3] I IND :TIMEOUT oad:200 dad:
P[ 3] I SEND:RELEASE_COMPLETE oad:200 dad:
P[ 3] --> bc_state:BCHAN_RELEASE
P[ 3] I IND :CLEAN_UP oad: dad:
P[ 3] Trying to Release bc with l3id: 250042
P[ 3] * RELEASING CHANNEL pid:0 ctx:Intern dad: oad:200 state: WAITING4DIGS
P[ 3] CLEARSTACK queued, cleaning up
P[ 1] MGMT: SSTATUS: L2_RELEASED
P[ 1] MGMT: SSTATUS: L1_DEACTIVATED

Anschließend passiert dann nichts mehr - wenn ich intern (mISDN/3/200) abhebe, kriege ich kein Freizeichen und es taucht auch überhaupt nichts mehr im Log auf etc.

Macht es Sinn eine ältere 0.3.0 statt einem 0.3.1-RC zu probieren?
 
Es gibt hier Leute die schwören auf die 0.3.0-rc27 ..

ich würde aber gern den bug finden, damit wir bald einen 0.3.1 haben, die dann im bestenfall "richtig" stable ist.

Es wär nett wenn du mir zu dem Zustand einen Trace mit debuglevel 4 senden könntest.
 
Mist, gerade ist das wieder passiert, BEVOR ich den debuglevel hochgesetzt habe. Also, ich hoffe innerhalb der nächsten Stunde wird es dann wieder hängen und ich kann ein entsprechendes Log zur Verfügung stellen.

Ich gebe Dir Recht: Bug finden und in 0.3.1 fixen wäre natürlich schöner.
 
So, hier. Sagt mir natürlich alles nichts, aber das "P[ 0] mISDN_read wants us to wait" am Ende klingt verdächtig. Ergebnis ist jedenfalls, dass anschließend das Abheben des Hörers überhaupt keinerlei Reaktion mehr erzeugt.

P[ 3] --> Faking Realease_cr for 41000301
P[ 3] --> lib: RELEASE_CR Ind with l3id:400041
P[ 3] --> lib: CLEANING UP l3id: 400041
P[ 3] --> empty chan 1
P[ 3] BC_STATE_CHANGE: from:BCHAN_RELEASED to:BCHAN_EMPTY
P[ 3] BC_NEXT_STATE_CHANGE: from:BCHAN_EMPTY to:BCHAN_EMPTY
P[ 3] I IND :CLEAN_UP oad: dad:
P[ 3] --> mode:NT cause:16 ocause:16 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 3] --> screen:1 --> pres:0
P[ 3] --> channel:0 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:0 addr:50010302 l3id:400041
P[ 3] --> b_stid:10010300 layer_id:50010380
P[ 3] --> bc:817472c h:0 sh:0
P[ 3] --> bc_state:BCHAN_EMPTY
P[ 3] bchan_deactivate: called but not activated
P[ 3] Trying to Release bc with l3id: 400041
P[ 3] * RELEASING CHANNEL pid:0 ctx:Externwahl_cman dad:018053452255 oad:MSN state: CONNECTED
P[ 3] --> * State Down
P[ 3] --> Setting AST State to down
P[ 3] * --> In State Default
P[ 3] * --> Queue Hangup
P[ 3] CLEARSTACK queued, cleaning up
P[ 0] $$$ CLEANUP CALLED
P[ 1] P[ 3] $$$ CLEARING STACK
BC_STATE_CHANGE: from:BCHAN_BRIDGED to:BCHAN_ACTIVATED
P[ 1] Splitting bc:50010102 in conf:117
P[ 3] BC_STATE_CHANGE: from:BCHAN_EMPTY to:BCHAN_CLEANED
P[ 3] BCHAN: MGR_DELLAYER|CNF
P[ 3] BC_STATE_CHANGE: from:BCHAN_CLEANED to:BCHAN_CLEANED
P[ 1] BCHAN: DeACT Conf
P[ 1] BC_STATE_CHANGE: from:BCHAN_ACTIVATED to:BCHAN_RELEASED
P[ 1] handle_frm: frm->addr:42000103 frm->prim:34582
P[ 1] I IND :DISCONNECT oad:MSN dad:018053452255
P[ 1] --> mode:TE cause:16 ocause:16 rad: cad:18053452255
P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:2
P[ 1] --> screen:1 --> pres:0
P[ 1] --> channel:1 caps:Speech pi:8 keypad:
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> pid:59 addr:50010102 l3id:5000b
P[ 1] --> b_stid:10010100 layer_id:50010180
P[ 1] --> bc:815c80c h:0 sh:0
P[ 1] --> bc_state:BCHAN_RELEASED
May 24 17:21:17 WARNING[17150]: chan_misdn.c:3004 cb_events: No Ast or No private Pointer in Event (25:DISCONNECT)
P[ 3] --> lib: prim 30582 dinfo 10041
P[ 3] set_channel: bc->channel:0 channel:-1
P[ 3] I IND :SETUP oad:200 dad:
P[ 3] --> mode:NT cause:16 ocause:16 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan: rnumplan: cpnnumplan:0
P[ 3] --> screen:1 --> pres:0
P[ 3] --> channel:0 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:60 addr:50010302 l3id:10041
P[ 3] --> b_stid:0 layer_id:50010380
P[ 3] --> bc:817472c h:0 sh:0
P[ 3] --> bc_state:BCHAN_CLEANED
P[ 3] --> Bearer: Speech
P[ 3] --> Codec: Alaw
P[ 0] --> * NEW CHANNEL dad: oad:200
P[ 3] read_config: Getting Config
P[ 3] config_jb: Called
P[ 3] --> * CallGrp: PickupGrp:
P[ 3] --> CTON: Unknown
P[ 3] * Queuing chan 0x81d1e90
P[ 3] I SEND:SETUP_ACKNOWLEDGE oad:200 dad:
P[ 3] --> bc_state:BCHAN_CLEANED
P[ 3] --> mode:NT cause:16 ocause:16 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan: rnumplan: cpnnumplan:0
P[ 3] --> screen:1 --> pres:0
P[ 3] --> channel:0 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:60 addr:50010302 l3id:10041
P[ 3] --> b_stid:0 layer_id:50010380
P[ 3] --> bc:817472c h:0 sh:0
P[ 3] --> found chan: 1
P[ 3] setup_bc: with dsp
P[ 3] --> Channel is 1
P[ 3] --> TRANSPARENT Mode
P[ 3] BC_STATE_CHANGE: from:BCHAN_CLEANED to:BCHAN_SETUP
P[ 3] Tone Indicate:
P[ 3] --> Dial
P[ 3] misdn_write: zero write
P[ 3] BCHAN: MGR_SETSTACK|IND
P[ 3] --> Got Adr 50010302
P[ 3] BC_STATE_CHANGE: from:BCHAN_SETUP to:BCHAN_SETUPED
P[ 3] BC_STATE_CHANGE: from:BCHAN_SETUPED to:BCHAN_ACTIVE
P[ 3] --> lib: prim 34582 dinfo 10041
P[ 3] I IND :DISCONNECT oad:200 dad:
P[ 3] --> mode:NT cause:16 ocause:16 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan: rnumplan: cpnnumplan:0
P[ 3] --> screen:1 --> pres:0
P[ 3] --> channel:1 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:60 addr:50010302 l3id:10041
P[ 3] --> b_stid:10010300 layer_id:50010380
P[ 3] --> bc:817472c h:0 sh:0
P[ 3] --> bc_state:BCHAN_ACTIVE
P[ 3] $$$ find_holded: --> holded:0 channel:1
P[ 3] $$$ find_holded: --> holded:0 channel:1
P[ 3] --> org:2 nt:1, inbandavail:0 state:1
P[ 3] bchan_deactivate: called but not activated
P[ 3] I SEND:RELEASE oad:200 dad:
P[ 3] --> bc_state:BCHAN_ACTIVE
P[ 3] --> mode:NT cause:16 ocause:-1 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan: rnumplan: cpnnumplan:0
P[ 3] --> screen:1 --> pres:0
P[ 3] --> channel:1 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:60 addr:50010302 l3id:10041
P[ 3] --> b_stid:10010300 layer_id:50010380
P[ 3] --> bc:817472c h:0 sh:0
P[ 1] BC_STATE_CHANGE: from:BCHAN_RELEASED to:BCHAN_RELEASE
P[ 1] * IND : HANGUP pid:59 ctx:Extern_cman dad:018053452255 oad:018053452255 State:CONNECTED
P[ 1] --> l3id:5000b
P[ 1] --> cause:16
P[ 1] --> out_cause:16
P[ 1] --> * State Connected
P[ 1] bchannel_activate: BC Not properly upsetted (state:BCHAN_RELEASE) addr:50010102
P[ 1] Tone Indicate:
P[ 1] I SEND:DISCONNECT oad:MSN dad:018053452255
P[ 1] --> bc_state:BCHAN_RELEASE
P[ 1] --> mode:TE cause:16 ocause:16 rad: cad:18053452255
P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:2
P[ 1] --> screen:1 --> pres:0
P[ 1] --> channel:1 caps:Speech pi:8 keypad:
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> pid:59 addr:50010102 l3id:5000b
P[ 1] --> b_stid:10010100 layer_id:50010180
P[ 1] --> bc:815c80c h:0 sh:0
P[ 1] Channel: mISDN/1-u51 hanguped
P[ 1] Sending msg, prim:34580 addr:0 dinfo:5000b
P[ 3] BC_STATE_CHANGE: from:BCHAN_ACTIVE to:BCHAN_ACTIVATED
P[ 3] BCHAN: bchan ACT Confirm
P[ 3] --> lib: prim 20182 dinfo 41
P[ 3] % GOT L2 Activate Info.
P[ 3] --> lib: prim 20182 dinfo 41
P[ 3] % GOT L2 Activate Info.
P[ 3] --> lib: prim 3ff82 dinfo 10041
P[ 3] I IND :TIMEOUT oad:200 dad:
P[ 3] --> mode:NT cause:16 ocause:-1 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan: rnumplan: cpnnumplan:0
P[ 3] --> screen:1 --> pres:0
P[ 3] --> channel:1 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:60 addr:50010302 l3id:10041
P[ 3] --> b_stid:10010300 layer_id:50010380
P[ 3] --> bc:817472c h:0 sh:0
P[ 3] --> bc_state:BCHAN_ACTIVATED
P[ 3] I SEND:RELEASE_COMPLETE oad:200 dad:
P[ 3] --> bc_state:BCHAN_ACTIVATED
P[ 3] --> mode:NT cause:16 ocause:-1 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan: rnumplan: cpnnumplan:0
P[ 3] --> screen:1 --> pres:0
P[ 3] --> channel:1 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:60 addr:50010302 l3id:10041
P[ 3] --> b_stid:10010300 layer_id:50010380
P[ 3] --> bc:817472c h:0 sh:0
P[ 3] --> lib: prim 3f182 dinfo 10041
P[ 3] --> Faking Realease_cr for 41000301
P[ 3] --> lib: RELEASE_CR Ind with l3id:10041
P[ 3] --> lib: CLEANING UP l3id: 10041
P[ 3] --> empty chan 1
P[ 3] BC_STATE_CHANGE: from:BCHAN_ACTIVATED to:BCHAN_EMPTY
P[ 3] BC_NEXT_STATE_CHANGE: from:BCHAN_EMPTY to:BCHAN_EMPTY
P[ 3] I IND :CLEAN_UP oad: dad:
P[ 3] --> mode:NT cause:16 ocause:16 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 3] --> screen:1 --> pres:0
P[ 3] --> channel:0 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:0 addr:50010302 l3id:10041
P[ 3] --> b_stid:10010300 layer_id:50010380
P[ 3] --> bc:817472c h:0 sh:0
P[ 3] --> bc_state:BCHAN_EMPTY
P[ 3] bchan_deactivate: called but not activated
P[ 3] Trying to Release bc with l3id: 10041
P[ 3] * RELEASING CHANNEL pid:0 ctx:Intern dad: oad:200 state: WAITING4DIGS
P[ 3] --> * State Down
P[ 3] --> Setting AST State to down
P[ 3] --> * State Wait4dig | ExtCantMatch
P[ 3] CLEARSTACK queued, cleaning up
P[ 0] $$$ CLEANUP CALLED
P[ 3] $$$ CLEARING STACK
P[ 3] BC_STATE_CHANGE: from:BCHAN_EMPTY to:BCHAN_CLEANED
P[ 3] BCHAN: MGR_DELLAYER|CNF
P[ 3] BC_STATE_CHANGE: from:BCHAN_CLEANED to:BCHAN_CLEANED
P[ 3] --> lib: prim 20082 dinfo 41
P[ 3] % GOT L2 DeActivate Info.
P[ 1] handle_frm: frm->addr:42000103 frm->prim:34d82
P[ 1] I IND :RELEASE oad:MSN dad:018053452255
P[ 1] --> mode:TE cause:16 ocause:16 rad: cad:18053452255
P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:2
P[ 1] --> screen:1 --> pres:0
P[ 1] --> channel:1 caps:Speech pi:8 keypad:
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> pid:59 addr:50010102 l3id:5000b
P[ 1] --> b_stid:10010100 layer_id:50010180
P[ 1] --> bc:815c80c h:0 sh:0
P[ 1] --> bc_state:BCHAN_RELEASE
P[ 1] I SEND:RELEASE_COMPLETE oad:MSN dad:018053452255
P[ 1] --> bc_state:BCHAN_RELEASE
P[ 1] --> mode:TE cause:16 ocause:16 rad: cad:18053452255
P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:2
P[ 1] --> screen:1 --> pres:0
P[ 1] --> channel:1 caps:Speech pi:8 keypad:
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> pid:59 addr:50010102 l3id:5000b
P[ 1] --> b_stid:10010100 layer_id:50010180
P[ 1] --> bc:815c80c h:0 sh:0
P[ 1] handle_frm: frm->addr:42000103 frm->prim:3f182
P[ 1] --> lib: RELEASE_CR Ind with l3id:5000b
P[ 1] --> lib: CLEANING UP l3id: 5000b
P[ 1] --> empty chan 1
P[ 1] BC_STATE_CHANGE: from:BCHAN_RELEASE to:BCHAN_EMPTY
P[ 1] BC_NEXT_STATE_CHANGE: from:BCHAN_EMPTY to:BCHAN_EMPTY
P[ 1] I IND :CLEAN_UP oad: dad:
P[ 1] --> mode:TE cause:16 ocause:16 rad: cad:
P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1] --> screen:1 --> pres:0
P[ 1] --> channel:0 caps:Speech pi:0 keypad:
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> pid:0 addr:50010102 l3id:5000b
P[ 1] --> b_stid:10010100 layer_id:50010180
P[ 1] --> bc:815c80c h:0 sh:0
P[ 1] --> bc_state:BCHAN_EMPTY
P[ 1] bchan_deactivate: called but not activated
P[ 1] Trying to Release bc with l3id: 5000b
P[ 1] Sending msg, prim:35a80 addr:0 dinfo:5000b
P[ 1] CLEARSTACK queued, cleaning up
P[ 0] $$$ CLEANUP CALLED
P[ 1] BCHAN: MGR_DELLAYER|CNF
P[ 1] BC_STATE_CHANGE: from:BCHAN_EMPTY to:BCHAN_CLEANED
P[ 1] $$$ CLEARING STACK
P[ 0] mISDN_read wants us to wait
P[ 1] BC_STATE_CHANGE: from:BCHAN_CLEANED to:BCHAN_CLEANED
P[ 1] MGMT: Short status dinfo 2000000
P[ 1] MGMT: SSTATUS: L2_RELEASED
P[ 1] MGMT: Short status dinfo 1000000
P[ 1] MGMT: SSTATUS: L1_DEACTIVATED
 
Hier noch ein vollständiges Log von Asterisk-Start bis "mISDN reagiert nicht mehr":

Connected to Asterisk 1.2.0 currently running on pbx (pid = 20718)
P[ 3] --> lib: prim 20182 dinfo 40
P[ 3] % GOT L2 Activate Info.
P[ 3] --> lib: prim 30582 dinfo 190040
P[ 3] set_channel: bc->channel:0 channel:-1
P[ 3] I IND :SETUP oad:200 dad:
P[ 3] --> mode:NT cause:16 ocause:16 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan: rnumplan: cpnnumplan:0
P[ 3] --> screen:0 --> pres:0
P[ 3] --> channel:0 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:0 addr:0 l3id:190040
P[ 3] --> b_stid:0 layer_id:0
P[ 3] --> bc:8174724 h:0 sh:0
P[ 3] --> bc_state:BCHAN_CLEANED
P[ 3] --> Bearer: Speech
P[ 3] --> Codec: Alaw
P[ 0] --> * NEW CHANNEL dad: oad:200
P[ 3] read_config: Getting Config
P[ 3] config_jb: Called
P[ 3] --> * CallGrp: PickupGrp:
P[ 3] --> CTON: Unknown
P[ 3] * Queuing chan 0x81a7648
P[ 3] I SEND:SETUP_ACKNOWLEDGE oad:200 dad:
P[ 3] --> bc_state:BCHAN_CLEANED
P[ 3] --> mode:NT cause:16 ocause:16 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan: rnumplan: cpnnumplan:0
P[ 3] --> screen:0 --> pres:0
P[ 3] --> channel:0 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:0 addr:0 l3id:190040
P[ 3] --> b_stid:0 layer_id:0
P[ 3] --> bc:8174724 h:0 sh:0
P[ 3] --> found chan: 1
P[ 3] setup_bc: with dsp
P[ 3] --> Channel is 1
P[ 3] --> TRANSPARENT Mode
P[ 3] BC_STATE_CHANGE: from:BCHAN_CLEANED to:BCHAN_SETUP
P[ 3] Tone Indicate:
P[ 3] --> Dial
P[ 3] misdn_write: zero write
P[ 3] BCHAN: MGR_SETSTACK|IND
P[ 3] --> Got Adr 50010302
P[ 3] BC_STATE_CHANGE: from:BCHAN_SETUP to:BCHAN_SETUPED
P[ 3] BC_STATE_CHANGE: from:BCHAN_SETUPED to:BCHAN_ACTIVE
P[ 3] BC_STATE_CHANGE: from:BCHAN_ACTIVE to:BCHAN_ACTIVATED
P[ 3] BCHAN: bchan ACT Confirm
P[ 3] --> lib: prim 34582 dinfo 190040
P[ 3] I IND :DISCONNECT oad:200 dad:
P[ 3] --> mode:NT cause:16 ocause:16 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan: rnumplan: cpnnumplan:0
P[ 3] --> screen:0 --> pres:0
P[ 3] --> channel:1 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:0 addr:50010302 l3id:190040
P[ 3] --> b_stid:10010300 layer_id:50010380
P[ 3] --> bc:8174724 h:0 sh:0
P[ 3] --> bc_state:BCHAN_ACTIVATED
P[ 3] $$$ find_holded: --> holded:0 channel:1
P[ 3] --> org:2 nt:1, inbandavail:0 state:1
P[ 3] BC_STATE_CHANGE: from:BCHAN_ACTIVATED to:BCHAN_RELEASE
P[ 3] I SEND:RELEASE oad:200 dad:
P[ 3] --> bc_state:BCHAN_RELEASE
P[ 3] --> mode:NT cause:16 ocause:-1 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan: rnumplan: cpnnumplan:0
P[ 3] --> screen:0 --> pres:0
P[ 3] --> channel:1 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:0 addr:50010302 l3id:190040
P[ 3] --> b_stid:10010300 layer_id:50010380
P[ 3] --> bc:8174724 h:0 sh:0
P[ 3] BCHAN: DeACT Conf
P[ 3] BC_STATE_CHANGE: from:BCHAN_RELEASE to:BCHAN_RELEASED
P[ 3] --> lib: prim 3f182 dinfo 190040
P[ 3] --> Faking Realease_cr for 41000301
P[ 3] --> lib: RELEASE_CR Ind with l3id:190040
P[ 3] --> lib: CLEANING UP l3id: 190040
P[ 3] --> empty chan 1
P[ 3] BC_STATE_CHANGE: from:BCHAN_RELEASED to:BCHAN_EMPTY
P[ 3] BC_NEXT_STATE_CHANGE: from:BCHAN_EMPTY to:BCHAN_EMPTY
P[ 3] I IND :CLEAN_UP oad: dad:
P[ 3] --> mode:NT cause:16 ocause:16 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 3] --> screen:0 --> pres:0
P[ 3] --> channel:0 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:0 addr:50010302 l3id:190040
P[ 3] --> b_stid:10010300 layer_id:50010380
P[ 3] --> bc:8174724 h:0 sh:0
P[ 3] --> bc_state:BCHAN_EMPTY
P[ 3] bchan_deactivate: called but not activated
P[ 3] Trying to Release bc with l3id: 190040
P[ 3] * RELEASING CHANNEL pid:0 ctx:Intern dad: oad:200 state: WAITING4DIGS
P[ 3] --> * State Down
P[ 3] --> Setting AST State to down
P[ 3] --> * State Wait4dig | ExtCantMatch
P[ 3] CLEARSTACK queued, cleaning up
P[ 0] $$$ CLEANUP CALLED
P[ 3] $$$ CLEARING STACK
P[ 3] BCHAN: MGR_DELLAYER|CNF
P[ 3] BC_STATE_CHANGE: from:BCHAN_EMPTY to:BCHAN_CLEANED
P[ 0] mISDN_read wants us to wait
P[ 3] BC_STATE_CHANGE: from:BCHAN_CLEANED to:BCHAN_CLEANED
P[ 3] --> lib: prim 20082 dinfo 40
P[ 3] % GOT L2 DeActivate Info.
P[ 1] handle_frm: frm->addr:42000103 frm->prim:3f082
P[ 1] handle_frm: frm->addr:42000103 frm->prim:30582
P[ 1] set_channel: bc->channel:0 channel:1
P[ 1] I IND :SETUP oad:17620926690 dad:MSN
P[ 1] --> mode:TE cause:16 ocause:16 rad: cad:
P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] --> info_dad: onumplan:2 dnumplan:4 rnumplan: cpnnumplan:0
P[ 1] --> screen:0 --> pres:0
P[ 1] --> channel:1 caps:Speech pi:0 keypad:
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> pid:1 addr:0 l3id:20001
P[ 1] --> b_stid:0 layer_id:0
P[ 1] --> bc:815c804 h:0 sh:0
P[ 1] --> bc_state:BCHAN_CLEANED
P[ 1] --> Bearer: Speech
P[ 1] --> Codec: Alaw
P[ 0] --> * NEW CHANNEL dad:MSN oad:17620926690
P[ 1] read_config: Getting Config
P[ 1] config_jb: Called
P[ 1] --> * CallGrp: PickupGrp:
P[ 1] --> CTON: Unknown
P[ 1] * Queuing chan 0x81a7648
P[ 1] I SEND:pROCEEDING oad:SOMEEXTERNALNUMBER dad:MSN
P[ 1] --> bc_state:BCHAN_CLEANED
P[ 1] --> mode:TE cause:16 ocause:16 rad: cad:
P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] --> info_dad: onumplan:2 dnumplan:4 rnumplan: cpnnumplan:0
P[ 1] --> screen:0 --> pres:0
P[ 1] --> channel:1 caps:Speech pi:0 keypad:
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> pid:1 addr:0 l3id:20001
P[ 1] --> b_stid:0 layer_id:0
P[ 1] --> bc:815c804 h:0 sh:0
P[ 1] setup_bc: with dsp
P[ 1] --> Channel is 1
P[ 1] --> TRANSPARENT Mode
P[ 1] BC_STATE_CHANGE: from:BCHAN_CLEANED to:BCHAN_SETUP
P[ 1] GOT SETUP OK
P[ 1] Sending msg, prim:30280 addr:0 dinfo:20001
P[ 1] * IND : Indication [3] from MSN
P[ 1] --> * IND : ringing pid:1
P[ 1] I SEND:ALERTING oad:SOMEEXTERNALNUMBER dad:MSN
P[ 1] --> bc_state:BCHAN_SETUP
P[ 1] --> mode:TE cause:16 ocause:16 rad: cad:
P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] --> info_dad: onumplan:2 dnumplan:4 rnumplan: cpnnumplan:0
P[ 1] --> screen:0 --> pres:0
P[ 1] --> channel:1 caps:Speech pi:0 keypad:
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> pid:1 addr:0 l3id:20001
P[ 1] --> b_stid:10010100 layer_id:50010180
P[ 1] --> bc:815c804 h:0 sh:0
P[ 1] $$$ bc already upsetted stid :10010100 (state:BCHAN_SETUP)
P[ 1] Sending msg, prim:30180 addr:0 dinfo:20001
P[ 1] --> incoming_early_audio off
P[ 1] --> * SEND: State Ring pid:1
P[ 0] --> * NEW CHANNEL dad:200 oad:(null)
P[ 3] * Queuing chan 0x81ac630
P[ 3] read_config: Getting Config
P[ 3] config_jb: Called
P[ 3] --> * CallGrp: PickupGrp:
P[ 3] --> TON: Unknown
P[ 3] --> LTON: Unknown
P[ 3] --> CTON: Unknown
P[ 3] * CALL: 3/200
P[ 3] --> * dad:200 tech:mISDN/3-u1 ctx:Intern
P[ 3] --> * adding2newbc ext 200
P[ 3] --> * adding2newbc callerid SOMEEXTERNALNUMBER
P[ 3] update_config: Getting Config
P[ 3] --> pres: -1 screen: -1
P[ 3] --> pres: 1
P[ 3] --> PRES: Allowed (0x0)
P[ 3] --> SCREEN: Passed Screen (0x1)
P[ 3] NO OPTS GIVEN
P[ 3] I SEND:SETUP oad:SOMEEXTERNALNUMBER dad:200
P[ 3] --> bc_state:BCHAN_CLEANED
P[ 3] --> mode:NT cause:16 ocause:16 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 3] --> screen:1 --> pres:0
P[ 3] --> channel:0 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:0 addr:50010302 l3id:190040
P[ 3] --> b_stid:0 layer_id:50010380
P[ 3] --> bc:8174724 h:0 sh:0
P[ 3] --> found chan: 1
P[ 3] --> found channel: 1
P[ 3] --> new_l3id ff00
P[ 1] BCHAN: MGR_SETSTACK|IND
P[ 3] --> lib: prim 30581 dinfo ff00
P[ 3] --> lib: Event_ind:SETUP CONFIRM [NT] : new L3ID is 8001ff00
P[ 3] I IND :CC_SETUP|CONFIRM: old l3id:ff00 new l3id:8001ff00
P[ 3] I IND :NEW_L3ID oad:SOMEEXTERNALNUMBER dad:200
P[ 3] --> mode:NT cause:16 ocause:16 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 3] --> screen:1 --> pres:0
P[ 3] --> channel:1 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:2 addr:50010302 l3id:8001ff00
P[ 3] --> b_stid:0 layer_id:50010380
P[ 3] --> bc:8174724 h:0 sh:0
P[ 3] --> bc_state:BCHAN_CLEANED
P[ 1] --> Got Adr 50010102
P[ 1] BC_STATE_CHANGE: from:BCHAN_SETUP to:BCHAN_SETUPED
P[ 1] BC_STATE_CHANGE: from:BCHAN_SETUPED to:BCHAN_ACTIVE
P[ 1] BC_STATE_CHANGE: from:BCHAN_ACTIVE to:BCHAN_ACTIVATED
P[ 1] BCHAN: bchan ACT Confirm
P[ 3] --> * SEND: State Dialing pid:2
P[ 3] --> lib: prim 20182 dinfo 41
P[ 3] % GOT L2 Activate Info.
P[ 3] --> lib: prim 20182 dinfo 40
P[ 3] % GOT L2 Activate Info.
P[ 3] --> lib: prim 30182 dinfo 8001ff00
P[ 3] setup_bc: with dsp
P[ 3] --> Channel is 1
P[ 3] --> TRANSPARENT Mode
P[ 3] BC_STATE_CHANGE: from:BCHAN_CLEANED to:BCHAN_SETUP
P[ 3] I IND :ALERTING oad:SOMEEXTERNALNUMBER dad:200
P[ 3] --> mode:NT cause:16 ocause:16 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 3] --> screen:1 --> pres:0
P[ 3] --> channel:1 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:2 addr:50010302 l3id:8001ff00
P[ 3] --> b_stid:10010300 layer_id:50010380
P[ 3] --> bc:8174724 h:0 sh:0
P[ 3] --> bc_state:BCHAN_SETUP
P[ 3] Set State Ringing
P[ 3] We have no inband Data, the other end must create ringing
P[ 3] --> lib: prim 20182 dinfo 42
P[ 3] % GOT L2 Activate Info.
P[ 3] BCHAN: MGR_SETSTACK|IND
P[ 3] --> Got Adr 50010302
P[ 3] BC_STATE_CHANGE: from:BCHAN_SETUP to:BCHAN_SETUPED
P[ 3] BC_STATE_CHANGE: from:BCHAN_SETUPED to:BCHAN_ACTIVE
P[ 3] BC_STATE_CHANGE: from:BCHAN_ACTIVE to:BCHAN_ACTIVATED
P[ 3] BCHAN: bchan ACT Confirm
P[ 1] * IND : Indication [3] from MSN
P[ 1] --> * IND : ringing pid:1 but I was Ringing before, so ignoreing it
P[ 3] --> lib: prim 30182 dinfo 8001ff00
P[ 3] $$$ bc already upsetted stid :10010300 (state:BCHAN_ACTIVATED)
P[ 3] I IND :ALERTING oad:SOMEEXTERNALNUMBER dad:200
P[ 3] --> mode:NT cause:16 ocause:16 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 3] --> screen:1 --> pres:0
P[ 3] --> channel:1 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:2 addr:50010302 l3id:8001ff00
P[ 3] --> b_stid:10010300 layer_id:50010380
P[ 3] --> bc:8174724 h:0 sh:0
P[ 3] --> bc_state:BCHAN_ACTIVATED
P[ 3] Set State Ringing
P[ 3] We have no inband Data, the other end must create ringing
P[ 3] --> lib: prim 30782 dinfo 8001ff00
P[ 3] $$$ bc already upsetted stid :10010300 (state:BCHAN_ACTIVATED)
P[ 3] I IND :CONNECT oad:SOMEEXTERNALNUMBER dad:200
P[ 3] --> mode:NT cause:16 ocause:16 rad: cad:200
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 3] --> screen:1 --> pres:0
P[ 3] --> channel:1 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:2 addr:50010302 l3id:8001ff00
P[ 3] --> b_stid:10010300 layer_id:50010380
P[ 3] --> bc:8174724 h:0 sh:0
P[ 3] --> bc_state:BCHAN_ACTIVATED
P[ 3] I SEND:CONNECT_ACKNOWLEDGE oad:SOMEEXTERNALNUMBER dad:200
P[ 3] --> bc_state:BCHAN_ACTIVATED
P[ 3] --> mode:NT cause:16 ocause:16 rad: cad:200
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 3] --> screen:1 --> pres:0
P[ 3] --> channel:1 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:2 addr:50010302 l3id:8001ff00
P[ 3] --> b_stid:10010300 layer_id:50010380
P[ 3] --> bc:8174724 h:0 sh:0
P[ 3] --> ECHO OFF
P[ 3] Tone Indicate:
P[ 3] --> None
P[ 3] --> lib: prim 3f082 dinfo 8001ff00
P[ 3] --> Removing Process Id:0 on this port.
P[ 3] lib: Event_ind:CC_NEW_CR : very new L3ID is 80010040
P[ 3] I IND :NEW_L3ID oad:SOMEEXTERNALNUMBER dad:200
P[ 3] --> mode:NT cause:16 ocause:16 rad: cad:200
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 3] --> screen:1 --> pres:0
P[ 3] --> channel:1 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:2 addr:50010302 l3id:80010040
P[ 3] --> b_stid:10010300 layer_id:50010380
P[ 3] --> bc:8174724 h:0 sh:0
P[ 3] --> bc_state:BCHAN_ACTIVATED
P[ 3] bchannel_activate: BC Not properly upsetted (state:BCHAN_ACTIVATED) addr:50010302
P[ 1] * IND : Indication [-1] from MSN
P[ 1] --> * IND : -1! (stop indication) pid:1
P[ 1] Tone Indicate:
P[ 1] --> None
P[ 1] * ANSWER:
P[ 1] --> Connection is without BF encryption
P[ 1] --> ECHO OFF
P[ 1] Tone Indicate:
P[ 1] --> None
P[ 1] --> empty cad using dad
P[ 1] I SEND:CONNECT oad:SOMEEXTERNALNUMBER dad:MSN
P[ 1] --> bc_state:BCHAN_ACTIVATED
P[ 1] --> mode:TE cause:16 ocause:16 rad: cad:MSN
P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] --> info_dad: onumplan:2 dnumplan:4 rnumplan: cpnnumplan:0
P[ 1] --> screen:0 --> pres:0
P[ 1] --> channel:1 caps:Speech pi:0 keypad:
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> pid:1 addr:50010102 l3id:20001
P[ 1] --> b_stid:10010100 layer_id:50010180
P[ 1] --> bc:815c804 h:0 sh:0
P[ 1] $$$ bc already upsetted stid :10010100 (state:BCHAN_ACTIVATED)
P[ 1] bchannel_activate: BC Not properly upsetted (state:BCHAN_ACTIVATED) addr:50010102
P[ 1] Disabling Echo Cancellor when Bridged
P[ 3] Disabling Echo Cancellor when Bridged
P[ 1] I SEND: Making conference with Number:3
P[ 1] I Send: BRIDGE from:1 to:3
P[ 1] --> bc_addr:50010102
P[ 1] BC_STATE_CHANGE: from:BCHAN_ACTIVATED to:BCHAN_BRIDGED
P[ 1] Joining bc:50010102 in conf:3
P[ 3] --> bc_addr:50010302
P[ 3] BC_STATE_CHANGE: from:BCHAN_ACTIVATED to:BCHAN_BRIDGED
P[ 3] Joining bc:50010302 in conf:3
P[ 1] * Makeing Native Bridge between SOMEEXTERNALNUMBER and SOMEEXTERNALNUMBER
P[ 1] Sending msg, prim:30780 addr:0 dinfo:20001
P[ 1] handle_frm: frm->addr:42000103 frm->prim:30f82
P[ 1] bchannel_activate: BC Not properly upsetted (state:BCHAN_BRIDGED) addr:50010102
P[ 1] I IND :CONNECT_ACKNOWLEDGE oad:SOMEEXTERNALNUMBER dad:MSN
P[ 1] --> mode:TE cause:16 ocause:16 rad: cad:MSN
P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] --> info_dad: onumplan:2 dnumplan:4 rnumplan: cpnnumplan:0
P[ 1] --> screen:0 --> pres:0
P[ 1] --> channel:1 caps:Speech pi:0 keypad:
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> pid:1 addr:50010102 l3id:20001
P[ 1] --> b_stid:10010100 layer_id:50010180
P[ 1] --> bc:815c804 h:0 sh:0
P[ 1] --> bc_state:BCHAN_BRIDGED
P[ 1] bchannel_activate: BC Not properly upsetted (state:BCHAN_BRIDGED) addr:50010102
P[ 3] misdn_write: * prods us
P[ 3] --> lib: prim 20082 dinfo 42
P[ 3] % GOT L2 DeActivate Info.
P[ 3] --> lib: prim 20082 dinfo 41
P[ 3] % GOT L2 DeActivate Info.
P[ 3] --> lib: prim 34582 dinfo 80010040
P[ 3] I IND :DISCONNECT oad:SOMEEXTERNALNUMBER dad:200
P[ 3] --> mode:NT cause:16 ocause:16 rad: cad:200
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 3] --> screen:1 --> pres:0
P[ 3] --> channel:1 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:2 addr:50010302 l3id:80010040
P[ 3] --> b_stid:10010300 layer_id:50010380
P[ 3] --> bc:8174724 h:0 sh:0
P[ 3] --> bc_state:BCHAN_BRIDGED
P[ 3] $$$ find_holded: --> holded:0 channel:1
P[ 3] $$$ find_holded: --> holded:0 channel:1
P[ 3] --> org:1 nt:1, inbandavail:0 state:10
P[ 3] BC_STATE_CHANGE: from:BCHAN_BRIDGED to:BCHAN_ACTIVATED
P[ 3] Splitting bc:50010302 in conf:3
P[ 3] BC_STATE_CHANGE: from:BCHAN_ACTIVATED to:BCHAN_RELEASE
P[ 3] I SEND:RELEASE oad:SOMEEXTERNALNUMBER dad:200
P[ 3] --> bc_state:BCHAN_RELEASE
P[ 3] --> mode:NT cause:16 ocause:-1 rad: cad:200
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 3] --> screen:1 --> pres:0
P[ 3] --> channel:1 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:2 addr:50010302 l3id:80010040
P[ 3] --> b_stid:10010300 layer_id:50010380
P[ 3] --> bc:8174724 h:0 sh:0
P[ 3] BCHAN: DeACT Conf
P[ 3] BC_STATE_CHANGE: from:BCHAN_RELEASE to:BCHAN_RELEASED
P[ 3] --> lib: prim 3f182 dinfo 80010040
P[ 3] --> Faking Realease_cr for 41000301
P[ 3] --> lib: RELEASE_CR Ind with l3id:80010040
P[ 3] --> lib: CLEANING UP l3id: 80010040
P[ 3] --> empty chan 1
P[ 3] BC_STATE_CHANGE: from:BCHAN_RELEASED to:BCHAN_EMPTY
P[ 3] BC_NEXT_STATE_CHANGE: from:BCHAN_EMPTY to:BCHAN_EMPTY
P[ 3] I IND :CLEAN_UP oad: dad:
P[ 3] --> mode:NT cause:16 ocause:16 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 3] --> screen:1 --> pres:0
P[ 3] --> channel:0 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:0 addr:50010302 l3id:80010040
P[ 3] --> b_stid:10010300 layer_id:50010380
P[ 3] --> bc:8174724 h:0 sh:0
P[ 3] --> bc_state:BCHAN_EMPTY
P[ 3] bchan_deactivate: called but not activated
P[ 3] Trying to Release bc with l3id: 80010040
P[ 3] * RELEASING CHANNEL pid:0 ctx:Intern dad:200 oad:MSN state: CONNECTED
P[ 3] --> * State Down
P[ 3] --> Setting AST State to down
P[ 3] * --> In State Default
P[ 3] * --> Queue Hangup
P[ 3] CLEARSTACK queued, cleaning up
P[ 0] $$$ CLEANUP CALLED
P[ 3] $$$ CLEARING STACK
P[ 1] BC_STATE_CHANGE: from:BCHAN_BRIDGED to:BCHAN_ACTIVATED
P[ 1] Splitting bc:50010102 in conf:3
P[ 3] BCHAN: MGR_DELLAYER|CNF
P[ 3] BC_STATE_CHANGE: from:BCHAN_EMPTY to:BCHAN_CLEANED
P[ 1] BCHAN: DeACT Conf
P[ 1] BC_STATE_CHANGE: from:BCHAN_ACTIVATED to:BCHAN_RELEASED
P[ 3] BC_STATE_CHANGE: from:BCHAN_CLEANED to:BCHAN_CLEANED
P[ 1] BC_STATE_CHANGE: from:BCHAN_RELEASED to:BCHAN_RELEASE
P[ 1] * IND : HANGUP pid:1 ctx:Extern_cman dad:MSN oad:SOMEEXTERNALNUMBER State:CONNECTED
P[ 1] --> l3id:20001
P[ 1] --> cause:16
P[ 1] --> out_cause:16
P[ 1] --> * State Connected
P[ 1] bchannel_activate: BC Not properly upsetted (state:BCHAN_RELEASE) addr:50010102
P[ 1] Tone Indicate:
P[ 1] I SEND:DISCONNECT oad:SOMEEXTERNALNUMBER dad:MSN
P[ 1] --> bc_state:BCHAN_RELEASE
P[ 1] --> mode:TE cause:16 ocause:16 rad: cad:MSN
P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] --> info_dad: onumplan:2 dnumplan:4 rnumplan: cpnnumplan:0
P[ 1] --> screen:0 --> pres:0
P[ 1] --> channel:1 caps:Speech pi:0 keypad:
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> pid:1 addr:50010102 l3id:20001
P[ 1] --> b_stid:10010100 layer_id:50010180
P[ 1] --> bc:815c804 h:0 sh:0
P[ 1] Channel: mISDN/1-1 hanguped
P[ 1] Sending msg, prim:34580 addr:0 dinfo:20001
P[ 1] handle_frm: frm->addr:42000103 frm->prim:34d82
P[ 1] I IND :RELEASE oad:SOMEEXTERNALNUMBER dad:MSN
P[ 1] --> mode:TE cause:-1 ocause:16 rad: cad:MSN
P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] --> info_dad: onumplan:2 dnumplan:4 rnumplan: cpnnumplan:0
P[ 1] --> screen:0 --> pres:0
P[ 1] --> channel:1 caps:Speech pi:0 keypad:
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> pid:1 addr:50010102 l3id:20001
P[ 1] --> b_stid:10010100 layer_id:50010180
P[ 1] --> bc:815c804 h:0 sh:0
P[ 1] --> bc_state:BCHAN_RELEASE
P[ 1] I SEND:RELEASE_COMPLETE oad:SOMEEXTERNALNUMBER dad:MSN
P[ 1] --> bc_state:BCHAN_RELEASE
P[ 1] --> mode:TE cause:-1 ocause:16 rad: cad:MSN
P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] --> info_dad: onumplan:2 dnumplan:4 rnumplan: cpnnumplan:0
P[ 1] --> screen:0 --> pres:0
P[ 1] --> channel:1 caps:Speech pi:0 keypad:
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> pid:1 addr:50010102 l3id:20001
P[ 1] --> b_stid:10010100 layer_id:50010180
P[ 1] --> bc:815c804 h:0 sh:0
P[ 1] handle_frm: frm->addr:42000103 frm->prim:3f182
P[ 1] --> lib: RELEASE_CR Ind with l3id:20001
P[ 1] --> lib: CLEANING UP l3id: 20001
P[ 1] --> empty chan 1
P[ 1] BC_STATE_CHANGE: from:BCHAN_RELEASE to:BCHAN_EMPTY
P[ 1] BC_NEXT_STATE_CHANGE: from:BCHAN_EMPTY to:BCHAN_EMPTY
P[ 1] I IND :CLEAN_UP oad: dad:
P[ 1] --> mode:TE cause:16 ocause:16 rad: cad:
P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1] --> screen:0 --> pres:0
P[ 1] --> channel:0 caps:Speech pi:0 keypad:
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> pid:0 addr:50010102 l3id:20001
P[ 1] --> b_stid:10010100 layer_id:50010180
P[ 1] --> bc:815c804 h:0 sh:0
P[ 1] --> bc_state:BCHAN_EMPTY
P[ 1] bchan_deactivate: called but not activated
P[ 1] Trying to Release bc with l3id: 20001
P[ 1] Sending msg, prim:35a80 addr:0 dinfo:20001
P[ 1] CLEARSTACK queued, cleaning up
P[ 0] $$$ CLEANUP CALLED
P[ 1] BCHAN: MGR_DELLAYER|CNF
P[ 1] BC_STATE_CHANGE: from:BCHAN_EMPTY to:BCHAN_CLEANED
P[ 1] $$$ CLEARING STACK
P[ 0] mISDN_read wants us to wait
P[ 1] BC_STATE_CHANGE: from:BCHAN_CLEANED to:BCHAN_CLEANED
P[ 3] --> lib: prim 30582 dinfo 1a0040
P[ 3] set_channel: bc->channel:0 channel:-1
P[ 3] I IND :SETUP oad:200 dad:
P[ 3] --> mode:NT cause:16 ocause:16 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan: rnumplan: cpnnumplan:0
P[ 3] --> screen:1 --> pres:0
P[ 3] --> channel:0 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:3 addr:50010302 l3id:1a0040
P[ 3] --> b_stid:0 layer_id:50010380
P[ 3] --> bc:8174724 h:0 sh:0
P[ 3] --> bc_state:BCHAN_CLEANED
P[ 3] --> Bearer: Speech
P[ 3] --> Codec: Alaw
P[ 0] --> * NEW CHANNEL dad: oad:200
P[ 3] read_config: Getting Config
P[ 3] config_jb: Called
P[ 3] --> * CallGrp: PickupGrp:
P[ 3] --> CTON: Unknown
P[ 3] * Queuing chan 0x81a7648
P[ 3] I SEND:SETUP_ACKNOWLEDGE oad:200 dad:
P[ 3] --> bc_state:BCHAN_CLEANED
P[ 3] --> mode:NT cause:16 ocause:16 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan: rnumplan: cpnnumplan:0
P[ 3] --> screen:1 --> pres:0
P[ 3] --> channel:0 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:3 addr:50010302 l3id:1a0040
P[ 3] --> b_stid:0 layer_id:50010380
P[ 3] --> bc:8174724 h:0 sh:0
P[ 3] --> found chan: 1
P[ 3] setup_bc: with dsp
P[ 3] --> Channel is 1
P[ 3] --> TRANSPARENT Mode
P[ 3] BC_STATE_CHANGE: from:BCHAN_CLEANED to:BCHAN_SETUP
P[ 3] Tone Indicate:
P[ 3] --> Dial
P[ 3] misdn_write: zero write
P[ 3] BCHAN: MGR_SETSTACK|IND
P[ 3] --> Got Adr 50010302
P[ 3] BC_STATE_CHANGE: from:BCHAN_SETUP to:BCHAN_SETUPED
P[ 3] BC_STATE_CHANGE: from:BCHAN_SETUPED to:BCHAN_ACTIVE
P[ 3] --> lib: prim 34582 dinfo 1a0040
P[ 3] I IND :DISCONNECT oad:200 dad:
P[ 3] --> mode:NT cause:16 ocause:16 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan: rnumplan: cpnnumplan:0
P[ 3] --> screen:1 --> pres:0
P[ 3] --> channel:1 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:3 addr:50010302 l3id:1a0040
P[ 3] --> b_stid:10010300 layer_id:50010380
P[ 3] --> bc:8174724 h:0 sh:0
P[ 3] --> bc_state:BCHAN_ACTIVE
P[ 3] $$$ find_holded: --> holded:0 channel:1
P[ 3] --> org:2 nt:1, inbandavail:0 state:1
P[ 3] bchan_deactivate: called but not activated
P[ 3] I SEND:RELEASE oad:200 dad:
P[ 3] --> bc_state:BCHAN_ACTIVE
P[ 3] --> mode:NT cause:16 ocause:-1 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan: rnumplan: cpnnumplan:0
P[ 3] --> screen:1 --> pres:0
P[ 3] --> channel:1 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:3 addr:50010302 l3id:1a0040
P[ 3] --> b_stid:10010300 layer_id:50010380
P[ 3] --> bc:8174724 h:0 sh:0
P[ 3] BC_STATE_CHANGE: from:BCHAN_ACTIVE to:BCHAN_ACTIVATED
P[ 3] BCHAN: bchan ACT Confirm
P[ 3] --> lib: prim 35a82 dinfo 1a0040
P[ 3] I IND :RELEASE_COMPLETE oad:200 dad:
P[ 3] --> mode:NT cause:98 ocause:-1 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan: rnumplan: cpnnumplan:0
P[ 3] --> screen:1 --> pres:0
P[ 3] --> channel:1 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:3 addr:50010302 l3id:1a0040
P[ 3] --> b_stid:10010300 layer_id:50010380
P[ 3] --> bc:8174724 h:0 sh:0
P[ 3] --> bc_state:BCHAN_ACTIVATED
P[ 3] BCHAN: DeACT Conf
P[ 3] BC_STATE_CHANGE: from:BCHAN_ACTIVATED to:BCHAN_RELEASED
P[ 3] BC_STATE_CHANGE: from:BCHAN_RELEASED to:BCHAN_RELEASE
P[ 3] Trying to Release bc with l3id: 1a0040
P[ 3] * RELEASING CHANNEL pid:3 ctx:Intern dad: oad:200 state: WAITING4DIGS
P[ 3] --> * State Down
P[ 3] --> Setting AST State to down
P[ 3] --> * State Wait4dig | ExtCantMatch
P[ 3] --> lib: prim 3f182 dinfo 1a0040
P[ 3] --> Faking Realease_cr for 41000301
P[ 3] --> lib: RELEASE_CR Ind with l3id:1a0040
P[ 3] --> lib: CLEANING UP l3id: 1a0040
P[ 3] --> empty chan 1
P[ 3] BC_STATE_CHANGE: from:BCHAN_RELEASE to:BCHAN_EMPTY
P[ 3] BC_NEXT_STATE_CHANGE: from:BCHAN_EMPTY to:BCHAN_EMPTY
P[ 3] I IND :CLEAN_UP oad: dad:
P[ 3] --> mode:NT cause:16 ocause:16 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 3] --> screen:1 --> pres:0
P[ 3] --> channel:0 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:0 addr:50010302 l3id:1a0040
P[ 3] --> b_stid:10010300 layer_id:50010380
P[ 3] --> bc:8174724 h:0 sh:0
P[ 3] --> bc_state:BCHAN_EMPTY
P[ 3] CLEARSTACK queued, cleaning up
P[ 0] $$$ CLEANUP CALLED
P[ 3] $$$ CLEARING STACK
P[ 3] BCHAN: MGR_DELLAYER|CNF
P[ 3] BC_STATE_CHANGE: from:BCHAN_EMPTY to:BCHAN_CLEANED
P[ 3] BC_STATE_CHANGE: from:BCHAN_CLEANED to:BCHAN_CLEANED
P[ 3] --> lib: prim 20082 dinfo 40
P[ 3] % GOT L2 DeActivate Info.
P[ 1] MGMT: Short status dinfo 2000000
P[ 1] MGMT: SSTATUS: L2_RELEASED
P[ 1] MGMT: Short status dinfo 1000000
P[ 1] MGMT: SSTATUS: L1_DEACTIVATED
P[ 1] MGMT: Short status dinfo 1000001
P[ 1] MGMT: SSTATUS: L1_ACTIVATED
P[ 1] handle_frm: frm->addr:42000103 frm->prim:3f082
P[ 1] handle_frm: frm->addr:42000103 frm->prim:30582
P[ 1] set_channel: bc->channel:0 channel:1
P[ 1] I IND :SETUP oad: dad:MSN
P[ 1] --> mode:TE cause:16 ocause:16 rad: cad:
P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] --> info_dad: onumplan:0 dnumplan:4 rnumplan: cpnnumplan:0
P[ 1] --> screen:0 --> pres:1
P[ 1] --> channel:1 caps:Speech pi:0 keypad:
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> pid:4 addr:50010102 l3id:20002
P[ 1] --> b_stid:0 layer_id:50010180
P[ 1] --> bc:815c804 h:0 sh:0
P[ 1] --> bc_state:BCHAN_CLEANED
P[ 1] --> Bearer: Speech
P[ 1] --> Codec: Alaw
P[ 0] --> * NEW CHANNEL dad:MSN oad:
P[ 1] read_config: Getting Config
P[ 1] config_jb: Called
P[ 1] --> * CallGrp: PickupGrp:
P[ 1] --> CTON: Unknown
P[ 1] * Queuing chan 0x81b6740
P[ 1] I SEND:pROCEEDING oad: dad:MSN
P[ 1] --> bc_state:BCHAN_CLEANED
P[ 1] --> mode:TE cause:16 ocause:16 rad: cad:
P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] --> info_dad: onumplan:0 dnumplan:4 rnumplan: cpnnumplan:0
P[ 1] --> screen:0 --> pres:1
P[ 1] --> channel:1 caps:Speech pi:0 keypad:
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> pid:4 addr:50010102 l3id:20002
P[ 1] --> b_stid:0 layer_id:50010180
P[ 1] --> bc:815c804 h:0 sh:0
P[ 1] setup_bc: with dsp
P[ 1] --> Channel is 1
P[ 1] --> TRANSPARENT Mode
P[ 1] BC_STATE_CHANGE: from:BCHAN_CLEANED to:BCHAN_SETUP
P[ 1] GOT SETUP OK
P[ 1] Sending msg, prim:30280 addr:0 dinfo:20002
P[ 1] * IND : Indication [3] from MSN
P[ 1] --> * IND : ringing pid:4
P[ 1] I SEND:ALERTING oad: dad:MSN
P[ 1] --> bc_state:BCHAN_SETUP
P[ 1] --> mode:TE cause:16 ocause:16 rad: cad:
P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] P[ 1] BCHAN: MGR_SETSTACK|IND
P[ 1] --> Got Adr 50010102
P[ 1] BC_STATE_CHANGE: from:BCHAN_SETUP to:BCHAN_SETUPED
P[ 1] BC_STATE_CHANGE: from:BCHAN_SETUPED to:BCHAN_ACTIVE
P[ 1] MGMT: Short status dinfo 2000001
P[ 1] MGMT: SSTATUS: L2_ESTABLISH
P[ 1] BC_STATE_CHANGE: from:BCHAN_ACTIVE to:BCHAN_ACTIVATED
P[ 1] BCHAN: bchan ACT Confirm
--> info_dad: onumplan:0 dnumplan:4 rnumplan: cpnnumplan:0
P[ 1] --> screen:0 --> pres:1
P[ 1] --> channel:1 caps:Speech pi:0 keypad:
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> pid:4 addr:50010102 l3id:20002
P[ 1] --> b_stid:10010100 layer_id:50010180
P[ 1] --> bc:815c804 h:0 sh:0
P[ 1] $$$ bc already upsetted stid :10010100 (state:BCHAN_ACTIVATED)
P[ 1] Sending msg, prim:30180 addr:0 dinfo:20002
P[ 1] --> incoming_early_audio off
P[ 1] --> * SEND: State Ring pid:4
P[ 0] --> * NEW CHANNEL dad:200 oad:(null)
P[ 3] * Queuing chan 0x81b9d40
P[ 3] read_config: Getting Config
P[ 3] config_jb: Called
P[ 3] --> * CallGrp: PickupGrp:
P[ 3] --> TON: Unknown
P[ 3] --> LTON: Unknown
P[ 3] --> CTON: Unknown
P[ 3] * CALL: 3/200
P[ 3] --> * dad:200 tech:mISDN/3-u3 ctx:Intern
P[ 3] --> * adding2newbc ext 200
P[ 3] --> * adding2newbc callerid (null)
P[ 3] update_config: Getting Config
P[ 3] --> pres: -1 screen: -1
P[ 3] --> pres: 0
P[ 3] --> PRES: Allowed (0x0)
P[ 3] --> SCREEN: Unscreened (0x0)
P[ 3] NO OPTS GIVEN
P[ 3] I SEND:SETUP oad: dad:200
P[ 3] --> bc_state:BCHAN_CLEANED
P[ 3] --> mode:NT cause:16 ocause:16 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 3] --> screen:0 --> pres:0
P[ 3] --> channel:0 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:0 addr:50010302 l3id:1a0040
P[ 3] --> b_stid:0 layer_id:50010380
P[ 3] --> bc:8174724 h:0 sh:0
P[ 3] --> found chan: 1
P[ 3] --> found channel: 1
P[ 3] --> new_l3id ff00
P[ 3] --> lib: prim 30581 dinfo ff00
P[ 3] --> lib: Event_ind:SETUP CONFIRM [NT] : new L3ID is 8002ff00
P[ 3] I IND :CC_SETUP|CONFIRM: old l3id:ff00 new l3id:8002ff00
P[ 3] I IND :NEW_L3ID oad: dad:200
P[ 3] --> mode:NT cause:16 ocause:16 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 3] --> screen:0 --> pres:0
P[ 3] --> channel:1 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:5 addr:50010302 l3id:8002ff00
P[ 3] --> b_stid:0 layer_id:50010380
P[ 3] --> bc:8174724 h:0 sh:0
P[ 3] --> bc_state:BCHAN_CLEANED
P[ 3] --> * SEND: State Dialing pid:5
P[ 3] --> lib: prim 35a82 dinfo 8002ff00
P[ 3] I IND :RELEASE_COMPLETE oad: dad:200
P[ 3] --> mode:NT cause:18 ocause:16 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 3] --> screen:0 --> pres:0
P[ 3] --> channel:1 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:5 addr:50010302 l3id:8002ff00
P[ 3] --> b_stid:0 layer_id:50010380
P[ 3] --> bc:8174724 h:0 sh:0
P[ 3] --> bc_state:BCHAN_CLEANED
P[ 3] bchan_deactivate: called but not activated
P[ 3] Trying to Release bc with l3id: 8002ff00
P[ 3] * RELEASING CHANNEL pid:5 ctx:Intern dad:200 oad:MSN state: CALLING
P[ 3] --> * State Down
P[ 3] --> Setting AST State to down
P[ 3] * --> In State Callin
P[ 3] * --> Hangup
P[ 1] BC_STATE_CHANGE: from:BCHAN_ACTIVATED to:BCHAN_RELEASE
P[ 1] * IND : HANGUP pid:4 ctx:Extern_cman dad:MSN oad:(null) State:ALERTING
P[ 1] --> l3id:20002
P[ 1] --> cause:18
P[ 1] --> out_cause:16
P[ 1] --> * State Alerting
P[ 1] Tone Indicate:
P[ 1] I SEND:DISCONNECT oad: dad:MSN
P[ 1] --> bc_state:BCHAN_RELEASE
P[ 1] --> mode:TE cause:18 ocause:16 rad: cad:
P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] --> info_dad: onumplan:0 dnumplan:4 rnumplan: cpnnumplan:0
P[ 1] --> screen:0 --> pres:1
P[ 1] --> channel:1 caps:Speech pi:0 keypad:
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> pid:4 addr:50010102 l3id:20002
P[ 1] --> b_stid:10010100 layer_id:50010180
P[ 1] --> bc:815c804 h:0 sh:0
P[ 1] Channel: mISDN/1-1 hanguped
P[ 1] BCHAN: DeACT Conf
P[ 1] BC_STATE_CHANGE: from:BCHAN_RELEASE to:BCHAN_RELEASED
P[ 1] Sending msg, prim:34580 addr:0 dinfo:20002
P[ 1] handle_frm: frm->addr:42000103 frm->prim:34d82
P[ 1] I IND :RELEASE oad: dad:MSN
P[ 1] --> mode:TE cause:-1 ocause:16 rad: cad:
P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] --> info_dad: onumplan:0 dnumplan:4 rnumplan: cpnnumplan:0
P[ 1] --> screen:0 --> pres:1
P[ 1] --> channel:1 caps:Speech pi:0 keypad:
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> pid:4 addr:50010102 l3id:20002
P[ 1] --> b_stid:10010100 layer_id:50010180
P[ 1] --> bc:815c804 h:0 sh:0
P[ 1] --> bc_state:BCHAN_RELEASED
P[ 1] I SEND:RELEASE_COMPLETE oad: dad:MSN
P[ 1] --> bc_state:BCHAN_RELEASED
P[ 1] --> mode:TE cause:-1 ocause:16 rad: cad:
P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] --> info_dad: onumplan:0 dnumplan:4 rnumplan: cpnnumplan:0
P[ 1] --> screen:0 --> pres:1
P[ 1] --> channel:1 caps:Speech pi:0 keypad:
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> pid:4 addr:50010102 l3id:20002
P[ 1] --> b_stid:10010100 layer_id:50010180
P[ 1] --> bc:815c804 h:0 sh:0
P[ 1] handle_frm: frm->addr:42000103 frm->prim:3f182
P[ 1] --> lib: RELEASE_CR Ind with l3id:20002
P[ 1] --> lib: CLEANING UP l3id: 20002
P[ 1] --> empty chan 1
P[ 1] BC_STATE_CHANGE: from:BCHAN_RELEASED to:BCHAN_EMPTY
P[ 1] BC_NEXT_STATE_CHANGE: from:BCHAN_EMPTY to:BCHAN_EMPTY
P[ 1] I IND :CLEAN_UP oad: dad:
P[ 1] --> mode:TE cause:16 ocause:16 rad: cad:
P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1] --> screen:0 --> pres:0
P[ 1] --> channel:0 caps:Speech pi:0 keypad:
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> pid:0 addr:50010102 l3id:20002
P[ 1] --> b_stid:10010100 layer_id:50010180
P[ 1] --> bc:815c804 h:0 sh:0
P[ 1] --> bc_state:BCHAN_EMPTY
P[ 1] bchan_deactivate: called but not activated
P[ 1] Trying to Release bc with l3id: 20002
P[ 1] Sending msg, prim:35a80 addr:0 dinfo:20002
P[ 1] CLEARSTACK queued, cleaning up
P[ 0] $$$ CLEANUP CALLED
P[ 1] BCHAN: MGR_DELLAYER|CNF
P[ 1] BC_STATE_CHANGE: from:BCHAN_EMPTY to:BCHAN_CLEANED
P[ 1] $$$ CLEARING STACK
P[ 0] mISDN_read wants us to wait
P[ 1] BC_STATE_CHANGE: from:BCHAN_CLEANED to:BCHAN_CLEANED
P[ 3] --> lib: prim 3ff82 dinfo 8002ff00
P[ 3] I IND :TIMEOUT oad: dad:200
P[ 3] --> mode:NT cause:18 ocause:16 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 3] --> screen:0 --> pres:0
P[ 3] --> channel:1 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:5 addr:50010302 l3id:8002ff00
P[ 3] --> b_stid:0 layer_id:50010380
P[ 3] --> bc:8174724 h:0 sh:0
P[ 3] --> bc_state:BCHAN_CLEANED
May 24 19:36:08 WARNING[20746]: chan_misdn.c:2990 cb_events: Chan not existing at the moment bc->l3id:8002ff00 bc:0x8174724 event:TIMEOUT port:3 channel:1
P[ 3] --> lib: prim 3f182 dinfo 8002ff00
P[ 3] --> Faking Realease_cr for 41000301
P[ 3] --> Removing Process Id:0 on this port.
P[ 3] --> lib: RELEASE_CR Ind with l3id:8002ff00
P[ 3] --> lib: CLEANING UP l3id: 8002ff00
P[ 3] --> empty chan 1
P[ 3] BC_STATE_CHANGE: from:BCHAN_CLEANED to:BCHAN_EMPTY
P[ 3] BC_NEXT_STATE_CHANGE: from:BCHAN_EMPTY to:BCHAN_EMPTY
P[ 3] I IND :CLEAN_UP oad: dad:
P[ 3] --> mode:NT cause:16 ocause:16 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 3] --> screen:0 --> pres:0
P[ 3] --> channel:0 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:0 addr:50010302 l3id:8002ff00
P[ 3] --> b_stid:0 layer_id:50010380
P[ 3] --> bc:8174724 h:0 sh:0
P[ 3] --> bc_state:BCHAN_EMPTY
P[ 3] CLEARSTACK queued, cleaning up
P[ 0] $$$ CLEANUP CALLED
P[ 3] $$$ CLEARING STACK
May 24 19:36:08 WARNING[20745]: chan_misdn.c:4330 chan_misdn_log: clear stack failed [Success]
P[ 3] BC_STATE_CHANGE: from:BCHAN_EMPTY to:BCHAN_CLEANED
P[ 3] BCHAN: MGR_DELLAYER|CNF
P[ 3] BC_STATE_CHANGE: from:BCHAN_CLEANED to:BCHAN_CLEANED
P[ 1] handle_frm: frm->addr:42000103 frm->prim:3f082
P[ 1] handle_frm: frm->addr:42000103 frm->prim:30582
P[ 1] set_channel: bc->channel:0 channel:1
P[ 1] I IND :SETUP oad: dad:MSN
P[ 1] --> mode:TE cause:16 ocause:16 rad: cad:
P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] --> info_dad: onumplan:0 dnumplan:4 rnumplan: cpnnumplan:0
P[ 1] --> screen:0 --> pres:1
P[ 1] --> channel:1 caps:Speech pi:0 keypad:
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> pid:6 addr:50010102 l3id:20003
P[ 1] --> b_stid:0 layer_id:50010180
P[ 1] --> bc:815c804 h:0 sh:0
P[ 1] --> bc_state:BCHAN_CLEANED
P[ 1] --> Bearer: Speech
P[ 1] --> Codec: Alaw
P[ 0] --> * NEW CHANNEL dad:MSN oad:
P[ 1] read_config: Getting Config
P[ 1] config_jb: Called
P[ 1] --> * CallGrp: PickupGrp:
P[ 1] --> CTON: Unknown
P[ 1] * Queuing chan 0x81ba9e0
P[ 1] I SEND:pROCEEDING oad: dad:MSN
P[ 1] --> bc_state:BCHAN_CLEANED
P[ 1] --> mode:TE cause:16 ocause:16 rad: cad:
P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] --> info_dad: onumplan:0 dnumplan:4 rnumplan: cpnnumplan:0
P[ 1] --> screen:0 --> pres:1
P[ 1] --> channel:1 caps:Speech pi:0 keypad:
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> pid:6 addr:50010102 l3id:20003
P[ 1] --> b_stid:0 layer_id:50010180
P[ 1] --> bc:815c804 h:0 sh:0
P[ 1] setup_bc: with dsp
P[ 1] --> Channel is 1
P[ 1] --> TRANSPARENT Mode
P[ 1] BC_STATE_CHANGE: from:BCHAN_CLEANED to:BCHAN_SETUP
P[ 1] GOT SETUP OK
P[ 1] Sending msg, prim:30280 addr:0 dinfo:20003
P[ 1] * IND : Indication [3] from MSN
P[ 1] --> * IND : ringing pid:6
P[ 1] I SEND:ALERTING oad: dad:MSN
P[ 1] --> bc_state:BCHAN_SETUP
P[ 1] --> mode:TE cause:16 ocause:16 rad: cad:
P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] --> info_dad: onumplan:0 dnumplan:4 rnumplan: cpnnumplan:0
P[ 1] --> screen:0 --> pres:1
P[ 1] --> channel:1 caps:Speech pi:0 keypad:
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> pid:6 addr:50010102 l3id:20003
P[ 1] --> b_stid:10010100 layer_id:50010180
P[ 1] --> bc:815c804 h:0 sh:0
P[ 1] $$$ bc already upsetted stid :10010100 (state:BCHAN_SETUP)
P[ 1] Sending msg, prim:30180 addr:0 dinfo:20003
P[ 1] --> incoming_early_audio off
P[ 1] --> * SEND: State Ring pid:6
P[ 0] --> * NEW CHANNEL dad:200 oad:(null)
P[ 3] * Queuing chan 0x81bdba0
P[ 3] read_config: Getting Config
P[ 3] config_jb: Called
P[ 3] --> * CallGrp: PickupGrp:
P[ 3] --> TON: Unknown
P[ 3] --> LTON: Unknown
P[ 3] --> CTON: Unknown
P[ 3] * CALL: 3/200
P[ 3] --> * dad:200 tech:mISDN/3-u4 ctx:Intern
P[ 3] --> * adding2newbc ext 200
P[ 3] --> * adding2newbc callerid (null)
P[ 3] update_config: Getting Config
P[ 3] --> pres: -1 screen: -1
P[ 3] --> pres: 0
P[ 3] --> PRES: Allowed (0x0)
P[ 3] --> SCREEN: Unscreened (0x0)
P[ 3] NO OPTS GIVEN
P[ 3] I SEND:SETUP oad: dad:200
P[ 3] --> bc_state:BCHAN_CLEANED
P[ 3] --> mode:NT cause:16 ocause:16 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 3] --> screen:0 --> pres:0
P[ 3] --> channel:0 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:0 addr:50010302 l3id:8002ff00
P[ 3] --> b_stid:0 layer_id:50010380
P[ 3] --> bc:8174724 h:0 sh:0
P[ 3] --> found chan: 1
P[ 3] --> found channel: 1
P[ 3] --> new_l3id ff00
P[ 1] BCHAN: MGR_SETSTACK|IND
P[ 3] --> lib: prim 30581 dinfo ff00
P[ 3] --> lib: Event_ind:SETUP CONFIRM [NT] : new L3ID is 8003ff00
P[ 3] I IND :CC_SETUP|CONFIRM: old l3id:ff00 new l3id:8003ff00
P[ 3] I IND :NEW_L3ID oad: dad:200
P[ 1] --> Got Adr 50010102
P[ 1] BC_STATE_CHANGE: from:BCHAN_SETUP to:BCHAN_SETUPED
P[ 1] BC_STATE_CHANGE: from:BCHAN_SETUPED to:BCHAN_ACTIVE
P[ 3] --> mode:NT cause:16 ocause:16 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 3] --> screen:0 --> pres:0
P[ 3] --> channel:1 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:7 addr:50010302 l3id:8003ff00
P[ 3] --> b_stid:0 layer_id:50010380
P[ 3] --> bc:8174724 h:0 sh:0
P[ 3] --> bc_state:BCHAN_CLEANED
P[ 1] BC_STATE_CHANGE: from:BCHAN_ACTIVE to:BCHAN_ACTIVATED
P[ 1] BCHAN: bchan ACT Confirm
P[ 3] --> * SEND: State Dialing pid:7
P[ 3] --> lib: prim 35a82 dinfo 8003ff00
P[ 3] I IND :RELEASE_COMPLETE oad: dad:200
P[ 3] --> mode:NT cause:18 ocause:16 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 3] --> screen:0 --> pres:0
P[ 3] --> channel:1 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:7 addr:50010302 l3id:8003ff00
P[ 3] --> b_stid:0 layer_id:50010380
P[ 3] --> bc:8174724 h:0 sh:0
P[ 3] --> bc_state:BCHAN_CLEANED
P[ 3] bchan_deactivate: called but not activated
P[ 3] Trying to Release bc with l3id: 8003ff00
P[ 3] * RELEASING CHANNEL pid:7 ctx:Intern dad:200 oad:MSN state: CALLING
P[ 3] --> * State Down
P[ 3] --> Setting AST State to down
P[ 3] * --> In State Callin
P[ 3] * --> Hangup
P[ 1] BCHAN: DeACT Conf
P[ 1] BC_STATE_CHANGE: from:BCHAN_ACTIVATED to:BCHAN_RELEASED
P[ 1] BC_STATE_CHANGE: from:BCHAN_RELEASED to:BCHAN_RELEASE
P[ 1] * IND : HANGUP pid:6 ctx:Extern_cman dad:MSN oad:(null) State:ALERTING
P[ 1] --> l3id:20003
P[ 1] --> cause:18
P[ 1] --> out_cause:16
P[ 1] --> * State Alerting
P[ 1] Tone Indicate:
P[ 1] I SEND:DISCONNECT oad: dad:MSN
P[ 1] --> bc_state:BCHAN_RELEASE
P[ 1] --> mode:TE cause:18 ocause:16 rad: cad:
P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] --> info_dad: onumplan:0 dnumplan:4 rnumplan: cpnnumplan:0
P[ 1] --> screen:0 --> pres:1
P[ 1] --> channel:1 caps:Speech pi:0 keypad:
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> pid:6 addr:50010102 l3id:20003
P[ 1] --> b_stid:10010100 layer_id:50010180
P[ 1] --> bc:815c804 h:0 sh:0
P[ 1] Channel: mISDN/1-1 hanguped
P[ 1] Sending msg, prim:34580 addr:0 dinfo:20003
P[ 1] handle_frm: frm->addr:42000103 frm->prim:34d82
P[ 1] I IND :RELEASE oad: dad:MSN
P[ 1] --> mode:TE cause:-1 ocause:16 rad: cad:
P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] --> info_dad: onumplan:0 dnumplan:4 rnumplan: cpnnumplan:0
P[ 1] --> screen:0 --> pres:1
P[ 1] --> channel:1 caps:Speech pi:0 keypad:
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> pid:6 addr:50010102 l3id:20003
P[ 1] --> b_stid:10010100 layer_id:50010180
P[ 1] --> bc:815c804 h:0 sh:0
P[ 1] --> bc_state:BCHAN_RELEASE
P[ 1] I SEND:RELEASE_COMPLETE oad: dad:MSN
P[ 1] --> bc_state:BCHAN_RELEASE
P[ 1] --> mode:TE cause:-1 ocause:16 rad: cad:
P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] --> info_dad: onumplan:0 dnumplan:4 rnumplan: cpnnumplan:0
P[ 1] --> screen:0 --> pres:1
P[ 1] --> channel:1 caps:Speech pi:0 keypad:
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> pid:6 addr:50010102 l3id:20003
P[ 1] --> b_stid:10010100 layer_id:50010180
P[ 1] --> bc:815c804 h:0 sh:0
P[ 1] handle_frm: frm->addr:42000103 frm->prim:3f182
P[ 1] --> lib: RELEASE_CR Ind with l3id:20003
P[ 1] --> lib: CLEANING UP l3id: 20003
P[ 1] --> empty chan 1
P[ 1] BC_STATE_CHANGE: from:BCHAN_RELEASE to:BCHAN_EMPTY
P[ 1] BC_NEXT_STATE_CHANGE: from:BCHAN_EMPTY to:BCHAN_EMPTY
P[ 1] I IND :CLEAN_UP oad: dad:
P[ 1] --> mode:TE cause:16 ocause:16 rad: cad:
P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1] --> screen:0 --> pres:0
P[ 1] --> channel:0 caps:Speech pi:0 keypad:
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> pid:0 addr:50010102 l3id:20003
P[ 1] --> b_stid:10010100 layer_id:50010180
P[ 1] --> bc:815c804 h:0 sh:0
P[ 1] --> bc_state:BCHAN_EMPTY
P[ 1] bchan_deactivate: called but not activated
P[ 1] Trying to Release bc with l3id: 20003
P[ 1] Sending msg, prim:35a80 addr:0 dinfo:20003
P[ 1] CLEARSTACK queued, cleaning up
P[ 0] $$$ CLEANUP CALLED
P[ 1] BCHAN: MGR_DELLAYER|CNF
P[ 1] BC_STATE_CHANGE: from:BCHAN_EMPTY to:BCHAN_CLEANED
P[ 1] $$$ CLEARING STACK
P[ 0] mISDN_read wants us to wait
P[ 1] BC_STATE_CHANGE: from:BCHAN_CLEANED to:BCHAN_CLEANED
P[ 3] --> lib: prim 3ff82 dinfo 8003ff00
P[ 3] I IND :TIMEOUT oad: dad:200
P[ 3] --> mode:NT cause:18 ocause:16 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 3] --> screen:0 --> pres:0
P[ 3] --> channel:1 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:7 addr:50010302 l3id:8003ff00
P[ 3] --> b_stid:0 layer_id:50010380
P[ 3] --> bc:8174724 h:0 sh:0
P[ 3] --> bc_state:BCHAN_CLEANED
May 24 19:36:50 WARNING[20746]: chan_misdn.c:2990 cb_events: Chan not existing at the moment bc->l3id:8003ff00 bc:0x8174724 event:TIMEOUT port:3 channel:1
P[ 3] --> lib: prim 3f182 dinfo 8003ff00
P[ 3] --> Faking Realease_cr for 41000301
P[ 3] --> Removing Process Id:0 on this port.
P[ 3] --> lib: RELEASE_CR Ind with l3id:8003ff00
P[ 3] --> lib: CLEANING UP l3id: 8003ff00
P[ 3] --> empty chan 1
P[ 3] BC_STATE_CHANGE: from:BCHAN_CLEANED to:BCHAN_EMPTY
P[ 3] BC_NEXT_STATE_CHANGE: from:BCHAN_EMPTY to:BCHAN_EMPTY
P[ 3] I IND :CLEAN_UP oad: dad:
P[ 3] --> mode:NT cause:16 ocause:16 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 3] --> screen:0 --> pres:0
P[ 3] --> channel:0 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:0 addr:50010302 l3id:8003ff00
P[ 3] --> b_stid:0 layer_id:50010380
P[ 3] --> bc:8174724 h:0 sh:0
P[ 3] --> bc_state:BCHAN_EMPTY
P[ 3] CLEARSTACK queued, cleaning up
P[ 0] $$$ CLEANUP CALLED
P[ 3] $$$ CLEARING STACK
May 24 19:36:50 WARNING[20745]: chan_misdn.c:4330 chan_misdn_log: clear stack failed [Success]
P[ 3] BC_STATE_CHANGE: from:BCHAN_EMPTY to:BCHAN_CLEANED
P[ 3] BCHAN: MGR_DELLAYER|CNF
P[ 3] BC_STATE_CHANGE: from:BCHAN_CLEANED to:BCHAN_CLEANED
P[ 1] handle_frm: frm->addr:42000103 frm->prim:3f082
P[ 1] handle_frm: frm->addr:42000103 frm->prim:30582
P[ 1] set_channel: bc->channel:0 channel:1
P[ 1] I IND :SETUP oad: dad:MSN
P[ 1] --> mode:TE cause:16 ocause:16 rad: cad:
P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] --> info_dad: onumplan:0 dnumplan:4 rnumplan: cpnnumplan:0
P[ 1] --> screen:0 --> pres:1
P[ 1] --> channel:1 caps:Speech pi:0 keypad:
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> pid:8 addr:50010102 l3id:20004
P[ 1] --> b_stid:0 layer_id:50010180
P[ 1] --> bc:815c804 h:0 sh:0
P[ 1] --> bc_state:BCHAN_CLEANED
P[ 1] --> Bearer: Speech
P[ 1] --> Codec: Alaw
P[ 0] --> * NEW CHANNEL dad:MSN oad:
P[ 1] read_config: Getting Config
P[ 1] config_jb: Called
P[ 1] --> * CallGrp: PickupGrp:
P[ 1] --> CTON: Unknown
P[ 1] * Queuing chan 0x81bec30
P[ 1] I SEND:pROCEEDING oad: dad:MSN
P[ 1] --> bc_state:BCHAN_CLEANED
P[ 1] --> mode:TE cause:16 ocause:16 rad: cad:
P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] --> info_dad: onumplan:0 dnumplan:4 rnumplan: cpnnumplan:0
P[ 1] --> screen:0 --> pres:1
P[ 1] --> channel:1 caps:Speech pi:0 keypad:
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> pid:8 addr:50010102 l3id:20004
P[ 1] --> b_stid:0 layer_id:50010180
P[ 1] --> bc:815c804 h:0 sh:0
P[ 1] setup_bc: with dsp
P[ 1] --> Channel is 1
P[ 1] --> TRANSPARENT Mode
P[ 1] BC_STATE_CHANGE: from:BCHAN_CLEANED to:BCHAN_SETUP
P[ 1] GOT SETUP OK
P[ 1] Sending msg, prim:30280 addr:0 dinfo:20004
P[ 1] * IND : Indication [3] from MSN
P[ 1] --> * IND : ringing pid:8
P[ 1] I SEND:ALERTING oad: dad:MSN
P[ 1] --> bc_state:BCHAN_SETUP
P[ 1] --> mode:TE cause:16 ocause:16 rad: cad:
P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] --> info_dad: onumplan:0 dnumplan:4 rnumplan: cpnnumplan:0
P[ 1] --> screen:0 --> pres:1
P[ 1] --> channel:1 caps:Speech pi:0 keypad:
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> pid:8 addr:50010102 l3id:20004
P[ 1] --> b_stid:10010100 layer_id:50010180
P[ 1] --> bc:815c804 h:0 sh:0
P[ 1] $$$ bc already upsetted stid :10010100 (state:BCHAN_SETUP)
P[ 1] Sending msg, prim:30180 addr:0 dinfo:20004
P[ 1] --> incoming_early_audio off
P[ 1] --> * SEND: State Ring pid:8
P[ 0] --> * NEW CHANNEL dad:200 oad:(null)
P[ 3] * Queuing chan 0x81c11b8
P[ 3] read_config: Getting Config
P[ 3] config_jb: Called
P[ 3] --> * CallGrp: PickupGrp:
P[ 3] --> TON: Unknown
P[ 3] --> LTON: Unknown
P[ 3] --> CTON: Unknown
P[ 3] * CALL: 3/200
P[ 3] --> * dad:200 tech:mISDN/3-u5 ctx:Intern
P[ 3] --> * adding2newbc ext 200
P[ 3] --> * adding2newbc callerid (null)
P[ 3] update_config: Getting Config
P[ 3] --> pres: -1 screen: -1
P[ 3] --> pres: 0
P[ 3] --> PRES: Allowed (0x0)
P[ 3] --> SCREEN: Unscreened (0x0)
P[ 3] NO OPTS GIVEN
P[ 3] I SEND:SETUP oad: dad:200
P[ 3] --> bc_state:BCHAN_CLEANED
P[ 3] --> mode:NT cause:16 ocause:16 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 3] --> screen:0 --> pres:0
P[ 3] --> channel:0 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:0 addr:50010302 l3id:8003ff00
P[ 3] --> b_stid:0 layer_id:50010380
P[ 3] --> bc:8174724 h:0 sh:0
P[ 3] --> found chan: 1
P[ 3] --> found channel: 1
P[ 3] --> new_l3id ff00
P[ 1] BCHAN: MGR_SETSTACK|IND
P[ 3] --> lib: prim 30581 dinfo ff00
P[ 3] --> lib: Event_ind:SETUP CONFIRM [NT] : new L3ID is 8004ff00
P[ 3] I IND :CC_SETUP|CONFIRM: old l3id:ff00 new l3id:8004ff00
P[ 3] I IND :NEW_L3ID oad: dad:200
P[ 3] --> mode:NT cause:16 ocause:16 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 3] --> screen:0 --> pres:0
P[ 3] --> channel:1 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:9 addr:50010302 l3id:8004ff00
P[ 3] --> b_stid:0 layer_id:50010380
P[ 3] --> bc:8174724 h:0 sh:0
P[ 3] --> bc_state:BCHAN_CLEANED
P[ 1] --> Got Adr 50010102
P[ 1] BC_STATE_CHANGE: from:BCHAN_SETUP to:BCHAN_SETUPED
P[ 1] BC_STATE_CHANGE: from:BCHAN_SETUPED to:BCHAN_ACTIVE
P[ 1] BC_STATE_CHANGE: from:BCHAN_ACTIVE to:BCHAN_ACTIVATED
P[ 1] BCHAN: bchan ACT Confirm
P[ 3] --> * SEND: State Dialing pid:9
P[ 3] --> lib: prim 35a82 dinfo 8004ff00
P[ 3] I IND :RELEASE_COMPLETE oad: dad:200
P[ 3] --> mode:NT cause:18 ocause:16 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 3] --> screen:0 --> pres:0
P[ 3] --> channel:1 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:9 addr:50010302 l3id:8004ff00
P[ 3] --> b_stid:0 layer_id:50010380
P[ 3] --> bc:8174724 h:0 sh:0
P[ 3] --> bc_state:BCHAN_CLEANED
P[ 3] bchan_deactivate: called but not activated
P[ 3] Trying to Release bc with l3id: 8004ff00
P[ 3] * RELEASING CHANNEL pid:9 ctx:Intern dad:200 oad:MSN state: CALLING
P[ 3] --> * State Down
P[ 3] --> Setting AST State to down
P[ 3] * --> In State Callin
P[ 3] * --> Hangup
P[ 1] BCHAN: DeACT Conf
P[ 1] BC_STATE_CHANGE: from:BCHAN_ACTIVATED to:BCHAN_RELEASED
P[ 1] BC_STATE_CHANGE: from:BCHAN_RELEASED to:BCHAN_RELEASE
P[ 1] * IND : HANGUP pid:8 ctx:Extern_cman dad:MSN oad:(null) State:ALERTING
P[ 1] --> l3id:20004
P[ 1] --> cause:18
P[ 1] --> out_cause:16
P[ 1] --> * State Alerting
P[ 1] Tone Indicate:
P[ 1] I SEND:DISCONNECT oad: dad:MSN
P[ 1] --> bc_state:BCHAN_RELEASE
P[ 1] --> mode:TE cause:18 ocause:16 rad: cad:
P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] --> info_dad: onumplan:0 dnumplan:4 rnumplan: cpnnumplan:0
P[ 1] --> screen:0 --> pres:1
P[ 1] --> channel:1 caps:Speech pi:0 keypad:
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> pid:8 addr:50010102 l3id:20004
P[ 1] --> b_stid:10010100 layer_id:50010180
P[ 1] --> bc:815c804 h:0 sh:0
P[ 1] Channel: mISDN/1-1 hanguped
P[ 1] Sending msg, prim:34580 addr:0 dinfo:20004
P[ 1] handle_frm: frm->addr:42000103 frm->prim:34d82
P[ 1] I IND :RELEASE oad: dad:MSN
P[ 1] --> mode:TE cause:-1 ocause:16 rad: cad:
P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] --> info_dad: onumplan:0 dnumplan:4 rnumplan: cpnnumplan:0
P[ 1] --> screen:0 --> pres:1
P[ 1] --> channel:1 caps:Speech pi:0 keypad:
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> pid:8 addr:50010102 l3id:20004
P[ 1] --> b_stid:10010100 layer_id:50010180
P[ 1] --> bc:815c804 h:0 sh:0
P[ 1] --> bc_state:BCHAN_RELEASE
P[ 1] I SEND:RELEASE_COMPLETE oad: dad:MSN
P[ 1] --> bc_state:BCHAN_RELEASE
P[ 1] --> mode:TE cause:-1 ocause:16 rad: cad:
P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] --> info_dad: onumplan:0 dnumplan:4 rnumplan: cpnnumplan:0
P[ 1] --> screen:0 --> pres:1
P[ 1] --> channel:1 caps:Speech pi:0 keypad:
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> pid:8 addr:50010102 l3id:20004
P[ 1] --> b_stid:10010100 layer_id:50010180
P[ 1] --> bc:815c804 h:0 sh:0
P[ 1] handle_frm: frm->addr:42000103 frm->prim:3f182
P[ 1] --> lib: RELEASE_CR Ind with l3id:20004
P[ 1] --> lib: CLEANING UP l3id: 20004
P[ 1] --> empty chan 1
P[ 1] BC_STATE_CHANGE: from:BCHAN_RELEASE to:BCHAN_EMPTY
P[ 1] BC_NEXT_STATE_CHANGE: from:BCHAN_EMPTY to:BCHAN_EMPTY
P[ 1] I IND :CLEAN_UP oad: dad:
P[ 1] --> mode:TE cause:16 ocause:16 rad: cad:
P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1] --> screen:0 --> pres:0
P[ 1] --> channel:0 caps:Speech pi:0 keypad:
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> pid:0 addr:50010102 l3id:20004
P[ 1] --> b_stid:10010100 layer_id:50010180
P[ 1] --> bc:815c804 h:0 sh:0
P[ 1] --> bc_state:BCHAN_EMPTY
P[ 1] bchan_deactivate: called but not activated
P[ 1] Trying to Release bc with l3id: 20004
P[ 1] Sending msg, prim:35a80 addr:0 dinfo:20004
P[ 1] CLEARSTACK queued, cleaning up
P[ 0] $$$ CLEANUP CALLED
P[ 1] BCHAN: MGR_DELLAYER|CNF
P[ 1] BC_STATE_CHANGE: from:BCHAN_EMPTY to:BCHAN_CLEANED
P[ 1] $$$ CLEARING STACK
P[ 0] mISDN_read wants us to wait
P[ 1] BC_STATE_CHANGE: from:BCHAN_CLEANED to:BCHAN_CLEANED
P[ 3] --> lib: prim 3ff82 dinfo 8004ff00
P[ 3] I IND :TIMEOUT oad: dad:200
P[ 3] --> mode:NT cause:18 ocause:16 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 3] --> screen:0 --> pres:0
P[ 3] --> channel:1 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:9 addr:50010302 l3id:8004ff00
P[ 3] --> b_stid:0 layer_id:50010380
P[ 3] --> bc:8174724 h:0 sh:0
P[ 3] --> bc_state:BCHAN_CLEANED
May 24 19:37:20 WARNING[20746]: chan_misdn.c:2990 cb_events: Chan not existing at the moment bc->l3id:8004ff00 bc:0x8174724 event:TIMEOUT port:3 channel:1
P[ 3] --> lib: prim 3f182 dinfo 8004ff00
P[ 3] --> Faking Realease_cr for 41000301
P[ 3] --> Removing Process Id:0 on this port.
P[ 3] --> lib: RELEASE_CR Ind with l3id:8004ff00
P[ 3] --> lib: CLEANING UP l3id: 8004ff00
P[ 3] --> empty chan 1
P[ 3] BC_STATE_CHANGE: from:BCHAN_CLEANED to:BCHAN_EMPTY
P[ 3] BC_NEXT_STATE_CHANGE: from:BCHAN_EMPTY to:BCHAN_EMPTY
P[ 3] I IND :CLEAN_UP oad: dad:
P[ 3] --> mode:NT cause:16 ocause:16 rad: cad:
P[ 3] --> facility:FAC_NONE out_facility:FAC_NONE
P[ 3] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 3] --> screen:0 --> pres:0
P[ 3] --> channel:0 caps:Speech pi:0 keypad:
P[ 3] --> urate:0 rate:16 mode:0 user1:0
P[ 3] --> pid:0 addr:50010302 l3id:8004ff00
P[ 3] --> b_stid:0 layer_id:50010380
P[ 3] --> bc:8174724 h:0 sh:0
P[ 3] --> bc_state:BCHAN_EMPTY
P[ 3] CLEARSTACK queued, cleaning up
P[ 0] $$$ CLEANUP CALLED
P[ 3] $$$ CLEARING STACK
May 24 19:37:20 WARNING[20745]: chan_misdn.c:4330 chan_misdn_log: clear stack failed [Success]
P[ 3] BC_STATE_CHANGE: from:BCHAN_EMPTY to:BCHAN_CLEANED
P[ 3] BCHAN: MGR_DELLAYER|CNF
P[ 3] BC_STATE_CHANGE: from:BCHAN_CLEANED to:BCHAN_CLEANED
P[ 1] MGMT: Short status dinfo 2000000
P[ 1] MGMT: SSTATUS: L2_RELEASED
P[ 1] MGMT: Short status dinfo 1000000
P[ 1] MGMT: SSTATUS: L1_DEACTIVATED

Wenn ich noch irgendwas testen/tun soll, lass es mich bitte wissen, ansonsten probiere ich jetzt 0.3.0-rc27 aus (und wenn das auch nicht geht, zurück zu 0.2.1), meine Erreichbarkeit leidet doch ein wenig zu sehr im Moment ;)
 
Hallo Leute,

hab leider auch das Problem dass bei einem ankommenden Anruf per SIP (1und1) der Anrufende nicht den entsprechenden Ton hört, sondern nur Stille.

Hier ein Auszug der extensions.conf:

[in-1und1]

exten => 7594,1,Dial(mISDN/g:intern/7594)

Kommt der Anruf per ISDN zu Asterisk funktioniert alles ohne Probleme!
 
Hab mir das ganze nochmals angeschaut (vielleicht doch etwas früh gepostet)!

Asterisk bringt folgende Meldung:

P[ 1] Set State Ringing
P[ 1] We have no inband Data, the other end must create ringing
P[ 1] I IND :ALERTING oad:496332472249 dad:7594
P[ 1] Set State Ringing
P[ 1] We have no inband Data, the other end must create ringing

Leider erzeugt das andere Ende (FritzBox 7050) nicht das Klingeln. In der sip.conf steht ist folgender Eintrag vorhanden:
progressinband=yes

Ideen!?

Hatte selbst Ideen: far_alerting=yes war das Zauberwort

Leider kommen folgende Meldungen: Jun 13 22:25:20 WARNING[31304]: channel.c:2219 ast_write: Thread -1231676496 Blocking 'mISDN/1-u0', already blocked by thread -1245553744 in procedure ast_waitfor_nandfds
 
Zuletzt bearbeitet:
Tweety:

das ist so ne sache, far_alerting ist noch experimental, ich werde versuchen das zu reparieren... weiss aber noch nicht so recht wie ich das anstellen soll...
 
Hallo Crinch,

hab inzwsichen misdn-0.4.0-rc2 bei mir laufen da ich mit der 0.3.1 ziemliche Probleme hatte. 0.4.0-rc2 funktoniert aber im Moment wirklich gut. Die Fehlermeldung der channel.c erscheint immer noch.
 
Um antworten zu können musst du eingeloggt sein.

Zurzeit aktive Besucher

Gesamt: 711 (Mitglieder: 36, Gäste: 675)

Neueste Beiträge

Statistik des Forums

Themen
244,834
Beiträge
2,219,172
Mitglieder
371,533
Neuestes Mitglied
crcr24
Holen Sie sich 3CX - völlig kostenlos!
Verbinden Sie Ihr Team und Ihre Kunden Telefonie Livechat Videokonferenzen

Gehostet oder selbst-verwaltet. Für bis zu 10 Nutzer dauerhaft kostenlos. Keine Kreditkartendetails erforderlich. Ohne Risiko testen.

3CX
Für diese E-Mail-Adresse besteht bereits ein 3CX-Konto. Sie werden zum Kundenportal weitergeleitet, wo Sie sich anmelden oder Ihr Passwort zurücksetzen können, falls Sie dieses vergessen haben.
Ihr E-Mail-Adresse verifizieren

Ihr E-Mail-Adresse verifizieren

Wir haben Ihnen eine E-Mail geschickt. Klicken Sie auf die Schaltfläche im E-Mail-Text, um Ihre E-Mail-Adresse zu verifizieren – (Können Sie diese nicht finden können, dann überprüfen Sie Ihren Spam-Ordner).

IPPF im Überblick

Neueste Beiträge

Direktlinks Telefonanlage

Website-Sponsoren

3CX sponsor
KONTAKTIEREN SIE UNS BEI INTERESSE
| Style by ThemeHouse
XenPorta 2 PRO © Jason Axelrod of 8WAYRUN
Oben Unten
Zurück