mISDN & "all circuits are busy now"

firstclaas

Neuer User
Mitglied seit
16 Mai 2006
Beiträge
34
Punkte für Reaktionen
0
Punkte
0
Hallo,
mein Problem besteht darin, dass ich aus dem Urlaub wiedergekommen bin, und mein vorher perfekt funktionierender Asterisk nicht mehr richtig läuft!
Angeblich hat niemand an dem Rechner noch an der TK-Anlage rumgespielt. Er wurde lediglich in einen anderen Raum gestellt, mit anderer MSN und anderem Patchkabel.
Das Problem:
Es ist mir unmöglich Gespräche mit mISDN zu führen. Sobald ich rauswähle vernimmt man ein Tuten im Hörer und nach zweimaligem Tuten kommt dieses "all circuits are busy now". Ob Intern oder Extern... egal!
Dank "HobbyStern" ist es mir ja vor einiger Zeit gelungen, mISDN endlich zu benutzen. Seit dem habe ich nichts Wesentliches mehr verändert. (http://www.ip-phone-forum.de/showthread.php?t=106377&highlight=acer+128+surf)
Alles läuft hier mit freePBX V 2.1.1. Dort lege ich also die Trunks und die in- und outgoing Routes an.
Ich bin wie immer dankbar für jede Hilfe! Bin leicht eingerostet in den Semesterferien evtl. liegt es auch einfach daran ;)
Trotzdem nochmal die ganzen Konfigs und Meldungen die ich bekomme:
Code:
Hiermit fängt alles an ...???
voip*CLI> misdn show stacks
BEGIN STACK_LIST:
  * Stack Addr:40000104 Port 1 Type TE Prot. PMP L2Link DOWN L1Link:DOWN  Debug:0

[U]misdn.conf:[/U]
voip*CLI> misdn show config
Misdn General-Config:
 -> Version: chan_misdn-0.3.1-rc14
 -> misdn_init: /etc/misdn-init.conf -> debug: 0
 -> tracefile: /var/log/asterisk/misdn.trace -> bridging: yes
 -> stop_tone_after_first_digit: yes -> append_digits2exten: yes
 -> dynamic_crypt: no                -> crypt_prefix:
 -> crypt_keys:

[PORT 1]
 -> name: ISDN-TE                    -> allowed_bearers: all
 -> far_alerting: no                 -> rxgain: 0
 -> txgain: 0                        -> te_choose_channel: no
 -> pmp_l1_check: yes                -> hdlc: no
 -> context: isdn_incoming           -> language: de
 -> musicclass: default              -> callerid:
 -> method: standard                 -> dialplan: 0
 -> localdialplan: 0                 -> cpndialplan: 0
 -> nationalprefix: 0                -> internationalprefix: 049
 -> presentation: -1                 -> screen: -1
 -> always_immediate: no             -> immediate: no
 -> senddtmf: no                     -> hold_allowed: no
 -> early_bconnect: yes              -> incoming_early_audio: no
 -> echocancel: 0                    -> echocancelwhenbridged: no
 -> echotraining: 0                  -> need_more_infos: no
 -> jitterbuffer: 4000               -> jitterbuffer_upper_threshold: 0
 -> callgroup:                       -> pickupgroup:
 -> msns: 765                        -> ptp: no

[U]misdn-init.conf[/U]
card=1,hfcpci
te_ptmp=1
poll=128
dsp_options=0
debug=0

[U]dmesg:[/U]
HFC PCI: IRQ 17 count 43
HFC card cae17000 dch cae1705c bch1 cae171dc bch2 cae1735c
mISDN: HFC-PCI driver Rev. 1.45
HFC-PCI: No more PCI cards found
HFC 1 cards installed

[U]misdn debug message:[/U]
P[ 0] Got empty Msg..
P[ 0]  --> * NEW CHANNEL dad:5178386 oad:(null)
P[ 1] * Queuing chan 0x816a358
P[ 1] read_config: Getting Config
P[ 1] config_jb: Called
P[ 1]  --> * CallGrp: PickupGrp:
P[ 1]  --> TON: Unknown
P[ 1]  --> LTON: Unknown
P[ 1]  --> CTON: Unknown
P[ 1] * CALL: 1/5178386
P[ 1]  --> * dad:5178386 tech:mISDN/1-u2 ctx:default
P[ 1]  --> * adding2newbc ext 5178386
P[ 1]  --> * adding2newbc callerid 9596765
P[ 1] update_config: Getting Config
P[ 1]  --> pres: -1 screen: -1
P[ 1]  --> pres: 0
P[ 1]  --> PRES: Allowed (0x0)
P[ 1]  --> SCREEN: Unscreened (0x0)
P[ 1] NO OPTS GIVEN
P[ 1] SENDEVENT: stack->nt:0 stack->uperid:40000104
P[ 1] I SEND:SETUP oad:9596765 dad:5178386 pid:2
P[ 1]  --> bc_state:BCHAN_CLEANED
P[ 1]  --> mode:TE cause:16 ocause:16 rad: cad:
P[ 1]  --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1]  --> screen:0 --> pres:0
P[ 1]  --> channel:0 caps:Speech pi:0 keypad: sending_complete:0
P[ 1]  --> urate:0 rate:16 mode:0 user1:0
P[ 1]  --> pid:2 addr:0 l3id:30002
P[ 1]  --> b_stid:0 layer_id:0
P[ 1]  --> bc:8198714 h:0 sh:0
P[ 1] --> new_l3id 30003
P[ 1]  --> * SEND: State Dialing pid:3
P[ 1] Sending msg, prim:30580 addr:0 dinfo:30003
P[ 0] Got empty Msg..
P[ 1] MGMT: Short status dinfo 1000000
P[ 1] MGMT: SSTATUS: L1_DEACTIVATED
P[ 1] I IND :CLEAN_UP oad:9596765 dad:5178386 pid:3
P[ 1]  --> mode:TE cause:16 ocause:16 rad: cad:
P[ 1]  --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1]  --> screen:0 --> pres:0
P[ 1]  --> channel:255 caps:Speech pi:0 keypad: sending_complete:0
P[ 1]  --> urate:0 rate:16 mode:0 user1:0
P[ 1]  --> pid:3 addr:0 l3id:30003
P[ 1]  --> b_stid:0 layer_id:0
P[ 1]  --> bc:8198714 h:0 sh:0
P[ 1]  --> bc_state:BCHAN_CLEANED
P[ 1] release_chan: bc with l3id: 30003
P[ 1] * RELEASING CHANNEL pid:3 ctx:default dad:5178386 oad:995178386 state: CALLING
P[ 1]  --> * State Down
P[ 1]  --> Setting AST State to down
P[ 1] * --> In State Callin
P[ 1] * --> Queue Hangup
P[ 1]  --> empty chan 1
P[ 1] Idx:0 stack->cchan:0 Chan:1
P[ 1] Idx:1 stack->cchan:0 Chan:2
P[ 1] $$$ CLEANUP CALLED pid:3
P[ 1] $$$ Already cleaned up bc with stid :0
P[ 1] $$$ find_chan: No channel found for oad: dad:
P[ 0] $$$ find_chan: No channel found with l3id:0
P[ 1] I IND :CLEAN_UP oad: dad: pid:0
P[ 1]  --> mode:TE cause:16 ocause:16 rad: cad:
P[ 1]  --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1]  --> screen:0 --> pres:0
P[ 1]  --> channel:0 caps:Speech pi:0 keypad: sending_complete:0
P[ 1]  --> urate:0 rate:16 mode:0 user1:0
P[ 1]  --> pid:0 addr:0 l3id:0
P[ 1]  --> b_stid:0 layer_id:0
P[ 1]  --> bc:8198ce0 h:0 sh:0
P[ 1]  --> bc_state:BCHAN_CLEANED
P[ 1]  --> empty chan 2
P[ 1] Idx:0 stack->cchan:0 Chan:1
P[ 1] Idx:1 stack->cchan:0 Chan:2
P[ 1] $$$ CLEANUP CALLED pid:0
P[ 1] $$$ Already cleaned up bc with stid :0
P[ 1] handle_frm: frm->addr:42000103 frm->prim:3f182
P[ 1]  --> lib: RELEASE_CR Ind with l3id:30003
P[ 1]  --> lib: CLEANING UP l3id: 30003
P[ 1]  --> empty chan 0
P[ 1] Idx:0 stack->cchan:0 Chan:1
P[ 1] Idx:1 stack->cchan:0 Chan:2
P[ 1] $$$ CLEANUP CALLED pid:3
P[ 1] $$$ Already cleaned up bc with stid :0
P[ 1] Idx:0 stack->cchan:0 Chan:1
P[ 1] Idx:1 stack->cchan:0 Chan:2
P[ 1] $$$ find_chan: No channel found for oad: dad:
P[ 0] $$$ find_chan: No channel found with l3id:30003
P[ 1] I IND :CLEAN_UP oad: dad: pid:3
P[ 1]  --> mode:TE cause:16 ocause:16 rad: cad:
P[ 1]  --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1]  --> screen:0 --> pres:0
P[ 1]  --> channel:0 caps:Speech pi:0 keypad: sending_complete:0
P[ 1]  --> urate:0 rate:16 mode:0 user1:0
P[ 1]  --> pid:3 addr:0 l3id:30003
P[ 1]  --> b_stid:0 layer_id:0
P[ 1]  --> bc:8198714 h:0 sh:0
P[ 1]  --> bc_state:BCHAN_CLEANED

[U]verbose während des Versuch zu wählen:[/U]
[Aug 21 10:22:52]     -- Executing Macro("SIP/1000-fba7", "dialout-trunk|1|05178386||") in new stack
[Aug 21 10:22:52]     -- Executing Set("SIP/1000-fba7", "DIAL_TRUNK=1") in new stack
[Aug 21 10:22:52]     -- Executing Set("SIP/1000-fba7", "DIAL_NUMBER=05178386") in new stack
[Aug 21 10:22:52]     -- Executing Set("SIP/1000-fba7", "ROUTE_PASSWD=") in new stack
[Aug 21 10:22:52]     -- Executing GotoIf("SIP/1000-fba7", "1?noauth") in new stack
[Aug 21 10:22:52]     -- Goto (macro-dialout-trunk,s,6)
[Aug 21 10:22:52]     -- Executing Set("SIP/1000-fba7", "GROUP()=OUT_1") in new stack
[Aug 21 10:22:52]     -- Executing Macro("SIP/1000-fba7", "user-callerid") in new stack
[Aug 21 10:22:52]     -- Executing GotoIf("SIP/1000-fba7", "0?report") in new stack
[Aug 21 10:22:52]     -- Executing GotoIf("SIP/1000-fba7", "0?start") in new stack
[Aug 21 10:22:52]     -- Executing Set("SIP/1000-fba7", "REALCALLERIDNUM=1000") in new stack
[Aug 21 10:22:52]     -- Executing NoOp("SIP/1000-fba7", "REALCALLERIDNUM is 1000") in new stack
[Aug 21 10:22:52]     -- Executing Set("SIP/1000-fba7", "AMPUSER=1000") in new stack
[Aug 21 10:22:52]     -- Executing Set("SIP/1000-fba7", "AMPUSERCIDNAME=xxx") in new stack
[Aug 21 10:22:52]     -- Executing GotoIf("SIP/1000-fba7", "0?report") in new stack
[Aug 21 10:22:52]     -- Executing Set("SIP/1000-fba7", "CALLERID(all)=dd") in new stack
[Aug 21 10:22:52]     -- Executing NoOp("SIP/1000-fba7", "Using CallerID "ddddd") in new stack
[Aug 21 10:22:52]     -- Executing Macro("SIP/1000-fba7", "record-enable|1000|OUT") in new stack
[Aug 21 10:22:52]     -- Executing GotoIf("SIP/1000-fba7", "0 > 0?2:4") in new stack
[Aug 21 10:22:52]     -- Goto (macro-record-enable,s,4)
[Aug 21 10:22:52]     -- Executing AGI("SIP/1000-fba7", "recordingcheck|20060821-102252|1156148572.12") in new stack
[Aug 21 10:22:52]     -- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
[Aug 21 10:22:52]   recordingcheck|20060821-102252|1156148572.12: Outbound recording not enabled
[Aug 21 10:22:52]     -- AGI Script recordingcheck completed, returning 0
[Aug 21 10:22:52]     -- Executing NoOp("SIP/1000-fba7", "No recording needed") in new stack
[Aug 21 10:22:52]     -- Executing Macro("SIP/1000-fba7", "outbound-callerid|1") in new stack
[Aug 21 10:22:52]     -- Executing GotoIf("SIP/1000-fba7", "1?start") in new stack
[Aug 21 10:22:52]     -- Goto (macro-outbound-callerid,s,3)
[Aug 21 10:22:52]     -- Executing NoOp("SIP/1000-fba7", "REALCALLERIDNUM is 1000") in new stack
[Aug 21 10:22:52]     -- Executing Set("SIP/1000-fba7", "USEROUTCID=") in new stack
[Aug 21 10:22:52]     -- Executing Set("SIP/1000-fba7", "EMERGENCYCID=") in new stack
[Aug 21 10:22:52]     -- Executing Set("SIP/1000-fba7", "TRUNKOUTCID=9596765") in new stack
[Aug 21 10:22:52]     -- Executing GotoIf("SIP/1000-fba7", "1?trunkcid") in new stack
[Aug 21 10:22:52]     -- Goto (macro-outbound-callerid,s,11)
[Aug 21 10:22:52]     -- Executing GotoIf("SIP/1000-fba7", "0?usercid") in new stack
[Aug 21 10:22:52]     -- Executing Set("SIP/1000-fba7", "CALLERID(all)=9596765") in new stack
[Aug 21 10:22:52]     -- Executing GotoIf("SIP/1000-fba7", "1?report") in new stack
[Aug 21 10:22:52]     -- Goto (macro-outbound-callerid,s,15)
[Aug 21 10:22:52]     -- Executing NoOp("SIP/1000-fba7", "CallerID set to "" <9596765>") in new stack
[Aug 21 10:22:52]     -- Executing GotoIf("SIP/1000-fba7", "1?nomax") in new stack
[Aug 21 10:22:52]     -- Goto (macro-dialout-trunk,s,12)
[Aug 21 10:22:52]     -- Executing AGI("SIP/1000-fba7", "fixlocalprefix") in new stack
[Aug 21 10:22:52]     -- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix
[Aug 21 10:22:52]   fixlocalprefix: Could not parse /etc/asterisk/localprefixes.conf
[Aug 21 10:22:52]     -- AGI Script fixlocalprefix completed, returning 0
[Aug 21 10:22:52]     -- Executing Set("SIP/1000-fba7", "OUTNUM=05178386") in new stack
[Aug 21 10:22:52]     -- Executing Set("SIP/1000-fba7", "custom=AMP") in new stack
[Aug 21 10:22:52]     -- Executing GotoIf("SIP/1000-fba7", "1?customtrunk") in new stack
[Aug 21 10:22:52]     -- Goto (macro-dialout-trunk,s,18)
[Aug 21 10:22:52]     -- Executing Set("SIP/1000-fba7", "pre_num=AMP:misdn/1/") in new stack
[Aug 21 10:22:52]     -- Executing Set("SIP/1000-fba7", "the_num=OUTNUM") in new stack
[Aug 21 10:22:52]     -- Executing Set("SIP/1000-fba7", "post_num=") in new stack
[Aug 21 10:22:52]     -- Executing GotoIf("SIP/1000-fba7", "1?outnum:skipoutnum") in new stack
[Aug 21 10:22:52]     -- Goto (macro-dialout-trunk,s,22)
[Aug 21 10:22:52]     -- Executing Set("SIP/1000-fba7", "the_num=05178386") in new stack
[Aug 21 10:22:52]     -- Executing Dial("SIP/1000-fba7", "misdn/1/05178386|120|r") in new stack
[Aug 21 10:22:52]     -- Called 1/05178386
[Aug 21 10:22:59]   == No one is available to answer at this time (1:0/0/0)
[Aug 21 10:22:59]     -- Executing Goto("SIP/1000-fba7", "s-NOANSWER|1") in new stack
[Aug 21 10:22:59]     -- Goto (macro-dialout-trunk,s-NOANSWER,1)
[Aug 21 10:22:59]     -- Executing NoOp("SIP/1000-fba7", "Dial failed due to NOANSWER") in new stack
[Aug 21 10:22:59]     -- Executing Macro("SIP/1000-fba7", "outisbusy|") in new stack
[Aug 21 10:22:59]     -- Executing Playback("SIP/1000-fba7", "all-circuits-busy-now") in new stack
[Aug 21 10:22:59]     -- Playing 'all-circuits-busy-now' (language 'de')
[Aug 21 10:23:01]   == Spawn extension (macro-outisbusy, s, 1) exited non-zero on 'SIP/1000-fba7' in macro 'outisbusy'
[Aug 21 10:23:01]   == Spawn extension (macro-outisbusy, s, 1) exited non-zero on 'SIP/1000-fba7'

Ach ja...
Ziel ist es, über den Asterisk rein raus und auch intern, mit den vorhandenen Systemtelefonen, telefonieren zu können. Das ganze erstmal nur mit einer Isdn-Karte.

Danke
Claas
 
Zuletzt bearbeitet:
wusste ich es doch

Hallo,
ich hab es gewusst. Heute kam ich endlich dazu einen anderen S0-Bus auszuprobieren, und siehe da alles funktioniert wieder ohne Probleme. Lag also an der TK-Anlage....

Trotzdem vielen dank fürs Lesen und sich Gedankendarübermachen ;)

MfG Claas
 
Holen Sie sich 3CX - völlig kostenlos!
Verbinden Sie Ihr Team und Ihre Kunden Telefonie Livechat Videokonferenzen

Gehostet oder selbst-verwaltet. Für bis zu 10 Nutzer dauerhaft kostenlos. Keine Kreditkartendetails erforderlich. Ohne Risiko testen.

3CX
Für diese E-Mail-Adresse besteht bereits ein 3CX-Konto. Sie werden zum Kundenportal weitergeleitet, wo Sie sich anmelden oder Ihr Passwort zurücksetzen können, falls Sie dieses vergessen haben.