Mgmt: Sstatus: L1_deactivated

workaholiker

Neuer User
Mitglied seit
22 Aug 2005
Beiträge
22
Punkte für Reaktionen
0
Punkte
0
Hallo!

ich versuche eine kleine flepo mini pc als asterisk Anlage zu missbrauchen, dazu wurden 2 Acer 128 Surf mini USB Adapter angeschlossen, das eine soll im NT (ein ISDN Telefon hängt direkt dran), das andere in TE Modus laufen. Laut Systemmeldungen ist der Konfig meineserachtens sauber und ich kann rauswählen und angerufen werden, jedoch bein Rauswählen klingelt es beim Angerufenen ein paar mal und die Verbindung wird getrennt. Bei angehenden Anrufen, klingelt das ISDN Telefon solage bis jemand aufhebt, danach macht mISDN sofort "hangup_chan".

Woran könnte es liegen? Danke für alle Tipps :)

Ein paar System-Infos:
Code:
ubuntu 6.10 edgy, kernel 2.6.17-6-386

mISDN - per Skript installiert und aktualisiert mit dem letzten CVS , Asterisk 1.2.10

root@asterisk:/# lsmod
Module                  Size  Used by
mISDN_dsp             198504  0
hfcsusb                29684  0
mISDN_capi            115756  0
l3udss1                45940  0
mISDN_l2               42732  0
mISDN_l1               12500  0
mISDN_core             82240  6 mISDN_dsp,hfcsusb,mISDN_capi,l3udss1,mISDN_l2,mISDN_l1
dm_mod                 59704  1
md_mod                 79636  0
parport_pc             36260  0
lp                     12356  0
parport                37704  2 parport_pc,lp
af_packet              22024  2
capi                   18112  0
capifs                  6280  2 capi
kernelcapi             48672  2 mISDN_capi,capi
8139cp                 22784  0
8139too                27008  0
mii                     6144  2 8139cp,8139too
hw_random               6296  0
snd_cs5535audio        15260  0
snd_ac97_codec         98208  1 snd_cs5535audio
snd_ac97_bus            2560  1 snd_ac97_codec
snd_pcm_oss            46208  0
snd_mixer_oss          18688  1 snd_pcm_oss
snd_pcm                80648  3 snd_cs5535audio,snd_ac97_codec,snd_pcm_oss
snd_timer              23172  1 snd_pcm
psmouse                40200  0
snd                    54788  6 snd_cs5535audio,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore              10080  1 snd
serio_raw               7300  0
snd_page_alloc         10504  2 snd_cs5535audio,snd_pcm
evdev                  10624  0
ext3                  140168  1
jbd                    55956  1 ext3
ohci_hcd               21252  0
ehci_hcd               33160  0
usbcore               132992  4 hfcsusb,ohci_hcd,ehci_hcd
ide_generic             1536  0
ide_disk               17792  3
generic                 4868  0
amd74xx                15132  0 [permanent]
processor              24000  0
fbcon                  41760  0
tileblit                2944  1 fbcon
font                    8448  1 fbcon
bitblit                 6400  1 fbcon
softcursor              2304  1 bitblit
vesafb                  8348  0
capability              5128  0
commoncap               7680  1 capability

root@asterisk:/# lsusb
Bus 002 Device 003: ID 07b0:0007 Trust Technologies
Bus 002 Device 002: ID 07b0:0007 Trust Technologies
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000

/var/log/messages

Aug 26 13:10:02 asterisk kernel: [ 8855.631415] Modular ISDN Stack core $Revision: 1.37 $
Aug 26 13:10:02 asterisk kernel: [ 8855.652584] ISDN L1 driver version 1.17
Aug 26 13:10:02 asterisk kernel: [ 8855.673616] ISDN L2 driver version 1.30
Aug 26 13:10:02 asterisk kernel: [ 8855.695318] mISDN: DSS1 Rev. 1.39
Aug 26 13:10:02 asterisk kernel: [ 8855.726090] mISDN Capi 2.0 driver file version 1.20
Aug 26 13:10:03 asterisk kernel: [ 8856.225773] hfcsusb driver Rev. 1.19 (debug=131071)
Aug 26 13:10:03 asterisk kernel: [ 8856.230697] HFC-S USB: probing interface(0) actalt(0) minor(0) vend_idx(2)
Aug 26 13:10:03 asterisk kernel: [ 8856.230723] HFC-S USB: no valid endpoint found in USB descriptor
Aug 26 13:10:03 asterisk kernel: [ 8856.230741] mISDN_hfcsusb: probe of 2-3:1.0 failed with error -5
Aug 26 13:10:03 asterisk kernel: [ 8856.232439] HFC-S USB: probing interface(1) actalt(0) minor(0) vend_idx(2)
Aug 26 13:10:03 asterisk kernel: [ 8856.233042] HFC-S USB: detected "Billion tiny USB ISDN TA 128"
Aug 26 13:10:03 asterisk kernel: [ 8856.233061] HFC-S USB: Endpoint-Config: 3 Interrupt IN + 3 Isochron OUT (if=1 alt=2)
Aug 26 13:10:03 asterisk kernel: [ 8856.233086] hfcsusb_1 wants TE Mode
Aug 26 13:10:03 asterisk kernel: [ 8856.325743] HFC-S USB: starting intr IN fifo:5
Aug 26 13:10:03 asterisk kernel: [ 8856.326205] HFC-S USB: starting intr IN fifo:1
Aug 26 13:10:03 asterisk kernel: [ 8856.326673] HFC-S USB: starting intr IN fifo:3
Aug 26 13:10:03 asterisk kernel: [ 8856.327136] HFC-S USB: starting ISO-chain for Fifo 4
Aug 26 13:10:03 asterisk kernel: [ 8856.327630] HFC-S USB: starting ISO-chain for Fifo 0
Aug 26 13:10:03 asterisk kernel: [ 8856.328550] HFC-S USB: starting ISO-chain for Fifo 2
Aug 26 13:10:03 asterisk kernel: [ 8856.337898] layer2: Windowsize 1
Aug 26 13:10:03 asterisk kernel: [ 8856.338379] l1_manager prim f1482 not handled
Aug 26 13:10:03 asterisk kernel: [ 8856.347308] HFC-S USB: probing interface(0) actalt(0) minor(0) vend_idx(2)
Aug 26 13:10:03 asterisk kernel: [ 8856.347334] HFC-S USB: no valid endpoint found in USB descriptor
Aug 26 13:10:03 asterisk kernel: [ 8856.347352] mISDN_hfcsusb: probe of 2-4:1.0 failed with error -5
Aug 26 13:10:03 asterisk kernel: [ 8856.349186] HFC-S USB: probing interface(1) actalt(0) minor(0) vend_idx(2)
Aug 26 13:10:03 asterisk kernel: [ 8856.349821] HFC-S USB: detected "Billion tiny USB ISDN TA 128"
Aug 26 13:10:03 asterisk kernel: [ 8856.349840] HFC-S USB: Endpoint-Config: 3 Interrupt IN + 3 Isochron OUT (if=1 alt=2)
Aug 26 13:10:03 asterisk kernel: [ 8856.349866] hfcsusb_2 wants NT Mode
Aug 26 13:10:03 asterisk kernel: [ 8856.442677] HFC-S USB: starting intr IN fifo:5
Aug 26 13:10:03 asterisk kernel: [ 8856.443199] HFC-S USB: starting intr IN fifo:1
Aug 26 13:10:03 asterisk kernel: [ 8856.443647] HFC-S USB: starting intr IN fifo:3
Aug 26 13:10:03 asterisk kernel: [ 8856.444135] HFC-S USB: starting ISO-chain for Fifo 4
Aug 26 13:10:03 asterisk kernel: [ 8856.444636] HFC-S USB: starting ISO-chain for Fifo 0
Aug 26 13:10:03 asterisk kernel: [ 8856.445160] HFC-S USB: starting ISO-chain for Fifo 2
Aug 26 13:10:03 asterisk kernel: [ 8856.458553] usbcore: registered new driver mISDN_hfcsusb
Aug 26 13:10:03 asterisk kernel: [ 8856.483874] mISDN_dsp: Audio DSP  Rev. 1.23 (debug=0x0) EchoCancellor MG2 dtmftreshold(100)
Aug 26 13:10:03 asterisk kernel: [ 8856.483902] mISDN_dsp: DSP clocks every 64 samples. This equals 2 jiffies.

root@asterisk:/# misdnportinfo

Port  1: TE-mode BRI S/T interface line (for phone lines)
 -> Protocol: DSS1 (Euro ISDN)
 -> childcnt: 2
--------
Port  2: NT-mode BRI S/T interface port (for phones)
 -> Interface can be Poin-To-Point/Multipoint.
--------

mISDN_close: fid(3) isize(131072) inbuf(0x804c060) irp(0x804c060) iend(0x804c060)


/etc/misdn-init.conf

card=1,hfcsusb
card=2,hfcsusb

te_ptmp=1
nt_ptmp=2
poll=64
dsp_options=0
dtmftreshold=100
debug=1

misdn.conf

[TEPorts]
ports=1
callerid=1234567
msns=1234567,2345671,3456721
context=incoming

[NTPorts]
ports=2
msns=*
context=outgoing


extension.conf

[incoming]

exten => _X.,1,Dial(misdn/2/50)

[outgoing]

exten => _X.,1,SetcallerID(1234567)
exten => _X.,2,Dial(mISDN/g:TEPorts/${EXTEN})

Trace für einen ausgehenden Anruf:

Code:
P[ 2] % GOT L2 Activate Info.
P[ 2] set_channel: bc->channel:0 channel:-1
P[ 2] find_free_chan: req_chan:0
P[ 2]  --> found chan: 1
P[ 2] I IND :SETUP oad: dad: pid:2 state:none
P[ 2]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 2]  --> info_dad: onumplan:0 dnumplan:  rnumplan:  cpnnumplan:0
P[ 2]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 2]  --> Bearer: Speech
P[ 2]  --> Codec: Alaw
P[ 0]  --> * NEW CHANNEL dad: oad:xxCaller_IDxx
P[ 2]  --> CTON: Unknown
P[ 2] EXPORT_PID: pid:2
P[ 2]  --> PRES: Restricted (1)
P[ 2]  --> SCREEN: Unscreened (0)
P[ 2] I SEND:SETUP_ACKNOWLEDGE oad:xxCaller_IDxx dad: pid:2
P[ 2]  --> bc_state:BCHAN_CLEANED
P[ 2]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 2]  --> info_dad: onumplan:0 dnumplan:  rnumplan:  cpnnumplan:0
P[ 2]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 2]  --> TRANSPARENT Mode
P[ 2] After SETUP BC
P[ 2]  --> Dial
P[ 2] BCHAN: bchan ACT Confirm pid:2
P[ 2] I IND :INFORMATION oad:xxCaller_IDxx dad: pid:2 state:WAITING4DIGS
P[ 2]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 2]  --> info_dad:xxCalled_Numxx onumplan:0 dnumplan:  rnumplan:  cpnnumplan:0
P[ 2]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 2]  --> None
P[ 2]  --> None
    -- Executing SetCallerID("mISDN/2-1", "xxCaller_IDxx") in new stack
    -- Executing Dial("mISDN/2-1", "mISDN/g:TEPorts/xxCalled_Numxx") in new stack
P[ 0]  --> Group Call group: TEPorts
P[ 1] Group [TEPorts] Port [1]
P[ 0]  --> * NEW CHANNEL dad:xxCalled_Numxx oad:(null)
P[ 1]  --> * Setting Cid to xxCaller_IDxx
P[ 1]  --> TON: Unknown
P[ 1]  --> LTON: Unknown
P[ 1]  --> CTON: Unknown
P[ 1] * CALL: g:TEPorts/xxCalled_Numxx
P[ 1]  --> * dad:xxCalled_Numxx tech:mISDN/1-u0 ctx:incoming
P[ 1]  --> * adding2newbc ext xxCalled_Numxx
P[ 1]  --> * adding2newbc callerid xxCaller_IDxx
P[ 1] update_config: Getting Config
P[ 1]  --> pres: -1 screen: -1
P[ 1]  --> pres: 20
P[ 1]  --> PRES: Restricted (0x1)
P[ 1]  --> SCREEN: Unscreened (0x0)
P[ 1] IMPORT_PID: importing pid:2
P[ 1] NO OPTS GIVEN
P[ 1] I SEND:SETUP oad:xxCaller_IDxx dad:xxCalled_Numxx pid:3
P[ 1]  --> bc_state:BCHAN_CLEANED
P[ 1]  --> channel:0 mode:TE cause:16 ocause:16 rad: cad:
P[ 1]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 1] --> new_l3id 30001
P[ 1]  --> * SEND: State Dialing pid:3
    -- Called g:TEPorts/xxCalled_Numxx
P[ 1] set_channel: bc->channel:255 channel:1
P[ 1]  --> TRANSPARENT Mode
P[ 1] I IND :SETUP_ACKNOWLEDGE oad:xxCaller_IDxx dad:xxCalled_Numxx pid:3 state:CALLING
P[ 1]  --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 1]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 1] BCHAN: bchan ACT Confirm pid:3
P[ 1] set_channel: bc->channel:1 channel:-1
P[ 1] I IND :PROCEEDING oad:xxCaller_IDxx dad:xxCalled_Numxx pid:3 state:CALLING_ACKNOWLEDGE
P[ 1]  --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 1]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:0
    -- mISDN/1-u0 is proceeding passing it to mISDN/2-1
P[ 2] * IND : Indication [15] from xxCalled_Numxx
P[ 2]  --> * IND :      proceeding pid:2
P[ 2] I SEND:PROCEEDING oad:xxCaller_IDxx dad:xxCalled_Numxx pid:2
P[ 2]  --> bc_state:BCHAN_ACTIVATED
P[ 2]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 2]  --> info_dad:xxCalled_Numxx onumplan:0 dnumplan:  rnumplan:  cpnnumplan:0
P[ 2]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 2] After SETUP BC
P[ 2] MGMT: SSTATUS: L1_ACTIVATED
P[ 2] L1: PH L1Link Up!
P[ 2] MGMT: SSTATUS: L1_DEACTIVATED
P[ 2] hangup_chan
P[ 2] -> queue_hangup
P[ 2] release_chan: bc with l3id: 10040
P[ 2] * RELEASING CHANNEL pid:2 ctx:outgoing dad:xxCalled_Numxx oad:xxCaller_IDxx state: DIALING
P[ 2]  --> * State Down
P[ 2]  --> Setting AST State to down
P[ 2] $$$ CLEANUP CALLED pid:2
P[ 2] $$$ Cleaning up bc with stid :10010200 pid:2
P[ 2] ec_disable
P[ 2] $$$ CLEANUP CALLED pid:0
P[ 2] BCHAN: MGR_DELLAYER|CNF pid:2
P[ 1] * IND : HANGUP    pid:3 ctx:incoming dad:xxCalled_Numxx oad:xxCalled_Numxx State:PROCEEDING
P[ 1]  --> l3id:30001
P[ 1]  --> cause:16
P[ 1]  --> out_cause:16
P[ 1]  --> state:PROCEEDING
P[ 1] I SEND:DISCONNECT oad:xxCaller_IDxx dad:xxCalled_Numxx pid:3
P[ 1]  --> bc_state:BCHAN_ACTIVATED
P[ 1]  --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 1]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 1] Channel: mISDN/1-u0 hanguped new state:CLEANING
  == Spawn extension (outgoing, xxCalled_Numxx, 2) exited non-zero on 'mISDN/2-1'
P[ 1] $$$ CLEANUP CALLED pid:3
P[ 1] $$$ Cleaning up bc with stid :10010100 pid:3
P[ 1] ec_disable
P[ 1] I IND :RELEASE oad: dad: pid:3 state:CLEANING
P[ 1]  --> channel:0 mode:TE cause:-1 ocause:16 rad: cad:
P[ 1]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 1] ast_hangup already called, so we have no ast ptr anymore in event(RELEASE)
P[ 1] hangup_chan
P[ 1] No need to queue hangup
P[ 1] Cannot hangup chan, no ast
P[ 1] release_chan: bc with l3id: 30001
P[ 1] I SEND:RELEASE_COMPLETE oad: dad: pid:3
P[ 1]  --> bc_state:BCHAN_CLEANED
P[ 1]  --> channel:0 mode:TE cause:-1 ocause:16 rad: cad:
P[ 1]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 1] BCHAN: MGR_DELLAYER|CNF pid:3
P[ 2] % GOT L2 DeActivate Info.
P[ 2] $$$ CLEANUP CALLED pid:0

und eingehend:

Code:
P[ 1] MGMT: SSTATUS: L1_ACTIVATED
P[ 1] set_channel: bc->channel:0 channel:1
P[ 1] I IND :SETUP oad: dad:xxMAIN_MSNxx pid:6 state:none
P[ 1]  --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 1]  --> info_dad: onumplan:0 dnumplan:4 rnumplan:  cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:1
P[ 1]  --> Bearer: Speech
P[ 1]  --> Codec: Alaw
P[ 0]  --> * NEW CHANNEL dad:xxMAIN_MSNxx oad:
P[ 1]  --> CTON: Unknown
P[ 1] EXPORT_PID: pid:6
P[ 1]  --> PRES: Restricted (1)
P[ 1]  --> SCREEN: Unscreened (0)
P[ 1] I SEND:PROCEEDING oad: dad:xxMAIN_MSNxx pid:6
P[ 1]  --> bc_state:BCHAN_CLEANED
P[ 1]  --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 1]  --> info_dad: onumplan:0 dnumplan:4 rnumplan:  cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:1
    -- Executing Dial("mISDN/1-1", "misdn/2/50") in new stack
P[ 0]  --> * NEW CHANNEL dad:50 oad:(null)
P[ 2]  --> TON: Unknown
P[ 2]  --> LTON: Unknown
P[ 2]  --> CTON: Unknown
P[ 2] * CALL: 2/50
P[ 2]  --> * dad:50 tech:mISDN/2-u2 ctx:outgoing
P[ 2]  --> * adding2newbc ext 50
P[ 2]  --> * adding2newbc callerid (null)
P[ 2] update_config: Getting Config
P[ 2]  --> pres: -1 screen: -1
P[ 2]  --> pres: 20
P[ 2]  --> PRES: Restricted (0x1)
P[ 2]  --> SCREEN: Unscreened (0x0)
P[ 2] IMPORT_PID: importing pid:6
P[ 2] NO OPTS GIVEN
P[ 2] Queueing Event SETUP because L1 is down (btw. Activating L1)
P[ 2]  --> * SEND: State Dialing pid:7
    -- Called 2/50
P[ 2] MGMT: SSTATUS: L1_ACTIVATED
P[ 2] L1: PH L1Link Up!
P[ 2] I SEND:SETUP oad: dad:50 pid:7
P[ 2]  --> bc_state:BCHAN_CLEANED
P[ 2]  --> channel:0 mode:NT cause:16 ocause:16 rad: cad:
P[ 2]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 2]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 2] find_free_chan: req_chan:0
P[ 2]  --> found chan: 1
P[ 2]  --> new_l3id ff00
P[ 2] I IND :CC_SETUP|CONFIRM: old l3id:ff00 new l3id:8001ff00
P[ 2] I IND :NEW_L3ID oad: dad:50 pid:7 state:CALLING
P[ 2]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 2]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 2]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 1] MGMT: SSTATUS: L2_ESTABLISH
P[ 2] % GOT L2 Activate Info.
P[ 2] set_channel: bc->channel:1 channel:-1
P[ 2] I IND :PROCEEDING oad: dad:50 pid:7 state:CALLING
P[ 2]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 2]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 2]  --> caps:Speech pi:0 keypad: sending_complete:0
    -- mISDN/2-u2 is proceeding passing it to mISDN/1-1
P[ 1] * IND : Indication [15] from xxMAIN_MSNxx
P[ 1]  --> * IND :      proceeding pid:6
P[ 1] I SEND:PROCEEDING oad: dad:xxMAIN_MSNxx pid:6
P[ 1]  --> bc_state:BCHAN_CLEANED
P[ 1]  --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 1]  --> info_dad: onumplan:0 dnumplan:4 rnumplan:  cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:1
P[ 2] I IND :ALERTING oad: dad:50 pid:7 state:PROCEEDING
P[ 2]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 2]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 2]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 2] Set State Ringing
P[ 2] We have no inband Data, the other end must create ringing
    -- mISDN/2-u2 is ringing
P[ 1] * IND : Indication [3] from xxMAIN_MSNxx
P[ 1]  --> * IND :      ringing pid:6
P[ 1] I SEND:ALERTING oad: dad:xxMAIN_MSNxx pid:6
P[ 1]  --> bc_state:BCHAN_CLEANED
P[ 1]  --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 1]  --> info_dad: onumplan:0 dnumplan:4 rnumplan:  cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:1
P[ 1]  --> * SEND: State Ring pid:6
P[ 1]  --> incoming_early_audio off
P[ 2] % GOT L2 Activate Info.
P[ 2] set_channel: bc->channel:1 channel:-1
P[ 2] I IND :PROCEEDING oad: dad:50 pid:7 state:ALERTING
P[ 2]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 2]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 2]  --> caps:Speech pi:0 keypad: sending_complete:0
    -- mISDN/2-u2 is proceeding passing it to mISDN/1-1
P[ 1] * IND : Indication [15] from xxMAIN_MSNxx
P[ 1]  --> * IND :      proceeding pid:6
P[ 1] I SEND:PROCEEDING oad: dad:xxMAIN_MSNxx pid:6
P[ 1]  --> bc_state:BCHAN_CLEANED
P[ 1]  --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 1]  --> info_dad: onumplan:0 dnumplan:4 rnumplan:  cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:1
P[ 2] I IND :ALERTING oad: dad:50 pid:7 state:PROCEEDING
P[ 2]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 2]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 2]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 2] Set State Ringing
P[ 2] We have no inband Data, the other end must create ringing
    -- mISDN/2-u2 is ringing
P[ 2] I IND :CONNECT oad: dad:50 pid:7 state:ALERTING
P[ 2]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 2]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 2]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 2] I SEND:CONNECT_ACKNOWLEDGE  oad: dad:50 pid:7
P[ 2]  --> bc_state:BCHAN_CLEANED
P[ 2]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 2]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 2]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 2]  --> TRANSPARENT Mode
P[ 2] ec_enable
P[ 2]  --> ECHO OFF
P[ 2]  --> None
P[ 2] BCHAN: bchan ACT Confirm pid:7
P[ 2] I IND :NEW_L3ID oad: dad:50 pid:7 state:CONNECTED
P[ 2]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 2]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 2]  --> caps:Speech pi:0 keypad: sending_complete:0
    -- mISDN/2-u2 answered mISDN/1-1
P[ 1] * IND : Indication [-1] from xxMAIN_MSNxx
P[ 1]  --> * IND :      -1! (stop indication) pid:6
P[ 1]  --> None
P[ 1] * ANSWER:
P[ 1]  --> Connection is without BF encryption
P[ 1]  --> ECHO OFF
P[ 1]  --> None
P[ 1]  --> empty cad using dad
P[ 1] I SEND:CONNECT oad: dad:xxMAIN_MSNxx pid:6
P[ 1]  --> bc_state:BCHAN_CLEANED
P[ 1]  --> channel:1 mode:TE cause:16 ocause:16 rad: cad:xxMAIN_MSNxx
P[ 1]  --> info_dad: onumplan:0 dnumplan:4 rnumplan:  cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:1
P[ 1]  --> TRANSPARENT Mode
P[ 1] After SETUP BC
P[ 1] ec_enable
    -- Attempting native bridge of mISDN/1-1 and mISDN/2-u2
P[ 1] I SEND: Making conference with Number:7
P[ 1] I Send: BRIDGE from:1 to:2
P[ 1]  --> bc_addr:50010102
P[ 1] Joining bc:50010102 in conf:7
P[ 2]  --> bc_addr:50010202
P[ 2] Joining bc:50010202 in conf:7
P[ 1] * Making Native Bridge between  and
P[ 1] BCHAN: bchan ACT Confirm pid:6
P[ 2] MGMT: SSTATUS: L1_DEACTIVATED
P[ 2] hangup_chan
P[ 2] -> queue_hangup
P[ 2] release_chan: bc with l3id: 80010040
P[ 2] * RELEASING CHANNEL pid:7 ctx:outgoing dad:50 oad:xxMAIN_MSNxx state: CONNECTED
P[ 2]  --> * State Down
P[ 1] Read Null Frame
P[ 1] I SEND: Splitting conference with Number:7
P[ 1] Splitting bc:50010102 in conf:7
P[ 2] Splitting bc:50010202 in conf:7
P[ 2] * IND : HANGUP    pid:7 ctx:outgoing dad:50 oad:xxMAIN_MSNxx State:CONNECTED
P[ 2]  --> l3id:80010040
P[ 2]  --> cause:16
P[ 2]  --> out_cause:16
P[ 2]  --> state:CONNECTED
P[ 2] Queueing Event DISCONNECT because L1 is down (btw. Activating L1)
P[ 2] Channel: mISDN/2-u2 hanguped new state:CLEANING
  == Spawn extension (incoming, xxMAIN_MSNxx, 1) exited non-zero on 'mISDN/1-1'
P[ 1] * IND : HANGUP    pid:6 ctx:incoming dad:xxMAIN_MSNxx oad:(null) State:CONNECTED
P[ 1]  --> l3id:20001
P[ 1]  --> cause:16
P[ 1]  --> out_cause:16
P[ 1]  --> state:CONNECTED
P[ 1] I SEND:DISCONNECT oad: dad:xxMAIN_MSNxx pid:6
P[ 1]  --> bc_state:BCHAN_ACTIVATED
P[ 1]  --> channel:1 mode:TE cause:16 ocause:16 rad: cad:xxMAIN_MSNxx
P[ 1]  --> info_dad: onumplan:0 dnumplan:4 rnumplan:  cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:1
P[ 2]  --> Setting AST State to down
P[ 2] $$$ CLEANUP CALLED pid:7
P[ 2] $$$ Cleaning up bc with stid :10010200 pid:7
P[ 2] ec_disable
P[ 2] $$$ CLEANUP CALLED pid:0
P[ 2] BCHAN: MGR_DELLAYER|CNF pid:7
P[ 1] Channel: mISDN/1-1 hanguped new state:CLEANING
P[ 2] MGMT: SSTATUS: L1_ACTIVATED
P[ 2] L1: PH L1Link Up!
P[ 2] MGMT: SSTATUS: L1_DEACTIVATED
P[ 2] $$$ CLEANUP CALLED pid:0
P[ 2] $$$ CLEANUP CALLED pid:0
P[ 2] L1: PH L1Link Down!
P[ 2] % GOT L2 DeActivate Info.
P[ 2] $$$ CLEANUP CALLED pid:0
P[ 1] $$$ CLEANUP CALLED pid:6
P[ 1] $$$ Cleaning up bc with stid :10010100 pid:6
P[ 1] ec_disable
P[ 1] I IND :RELEASE oad: dad: pid:6 state:CLEANING
P[ 1]  --> channel:0 mode:TE cause:-1 ocause:16 rad: cad:
P[ 1]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 1] ast_hangup already called, so we have no ast ptr anymore in event(RELEASE)
P[ 1] hangup_chan
P[ 1] No need to queue hangup
P[ 1] Cannot hangup chan, no ast
P[ 1] release_chan: bc with l3id: 20001
P[ 1] I SEND:RELEASE_COMPLETE oad: dad: pid:6
P[ 1]  --> bc_state:BCHAN_CLEANED
P[ 1]  --> channel:0 mode:TE cause:-1 ocause:16 rad: cad:
P[ 1]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 1] BCHAN: MGR_DELLAYER|CNF pid:6
P[ 1] $$$ CLEANUP CALLED pid:0
 
Eine L1-Deaktivierung ist meines Wissens nach dann der Fall, wenn der Stecker nicht (mehr) drin ist.
Vielleicht bricht beim Abheben des Hörers die Spannung zusammen.
 

Neueste Beiträge

Statistik des Forums

Themen
244,695
Beiträge
2,216,691
Mitglieder
371,315
Neuestes Mitglied
jack-mack
Holen Sie sich 3CX - völlig kostenlos!
Verbinden Sie Ihr Team und Ihre Kunden Telefonie Livechat Videokonferenzen

Gehostet oder selbst-verwaltet. Für bis zu 10 Nutzer dauerhaft kostenlos. Keine Kreditkartendetails erforderlich. Ohne Risiko testen.

3CX
Für diese E-Mail-Adresse besteht bereits ein 3CX-Konto. Sie werden zum Kundenportal weitergeleitet, wo Sie sich anmelden oder Ihr Passwort zurücksetzen können, falls Sie dieses vergessen haben.