Hallo!
Ich habe eine einfache Line Extension mit zwei Stationen aufgebaut. Als CPE – Station habe ich eine SN4118/JS/EUI (Station A) verwendet, als CO – Station eine SN4118/4JS4JO/EUI. (Station B)
Zu einem Späteren Zeitpunkt habe ich die Anlage um eine weitere CO – Station, diesmal eine SN4114/JO/EUI (Station C), erweitert.
Jetzt habe ich folgendes Problem:
Die Telefone die an Station B hängen, können angerufen werden, (eine Unterhaltung ist auch möglich) aber man kann von diesen Telefonen kein anderes Ziel anrufen. (Besetzt Ton)
Telefone, die an Station C hängen, funktionieren normal.
Hier habe ich die Konfiguration von Station A:
Hier habe ich die Konfiguration von Station B:
Hier habe ich die Konfiguration von Station C:
Kann mir vielleicht jemand weiterhelfen?
Gruss, Matthias.
Ich habe eine einfache Line Extension mit zwei Stationen aufgebaut. Als CPE – Station habe ich eine SN4118/JS/EUI (Station A) verwendet, als CO – Station eine SN4118/4JS4JO/EUI. (Station B)
Zu einem Späteren Zeitpunkt habe ich die Anlage um eine weitere CO – Station, diesmal eine SN4114/JO/EUI (Station C), erweitert.
Jetzt habe ich folgendes Problem:
Die Telefone die an Station B hängen, können angerufen werden, (eine Unterhaltung ist auch möglich) aber man kann von diesen Telefonen kein anderes Ziel anrufen. (Besetzt Ton)
Telefone, die an Station C hängen, funktionieren normal.
Hier habe ich die Konfiguration von Station A:
Code:
#----------------------------------------------------------------#
# #
# SN4118/JS/EUI #
# R3.20 2006-02-02 H323 SIP FXS FXO #
# 2007-01-24T05:36:57 #
# Generated configuration file #
# Für 10.124.50.57 #
#----------------------------------------------------------------#
cli version 3.20
webserver port 80 language en
sntp-client
sntp-client server primary 129.132.2.21 port 123 version 4
system
ic voice 0
low-bitrate-codec g729
profile ppp default
profile tone-set default
profile voip default
codec 1 g711alaw64k rx-length 20 tx-length 20
codec 2 g711ulaw64k rx-length 20 tx-length 20
codec 3 g729 rx-length 20 tx-length 20
fax transmission 1 relay t38-udp
fax transmission 2 bypass g711alaw64k
fax redundancy low-speed 1 high-speed 1
profile pstn default
profile sip default
profile aaa default
method 1 local
method 2 none
context ip router
interface IF_IP_ETH0
ipaddress 10.124.50.57 255.255.255.0
context ip router
route 0.0.0.0 0.0.0.0 10.124.50.65 0
context cs switch
routing-table called-e164 RT_CDPN_FXS_2_SIP
route .T3 dest-interface IF_SIP
routing-table called-e164 RT_CDPN_SIP_2_FXS
route 10 dest-interface IF_FXS_00
route 20 dest-interface IF_FXS_01
route 30 dest-interface IF_FXS_02
route 40 dest-interface IF_FXS_03
route 50 dest-interface IF_FXS_04
route 60 dest-interface IF_FXS_05
route 70 dest-interface IF_FXS_06
route 80 dest-interface IF_FXS_07
interface sip IF_SIP
bind gateway GW_SIP
service default
route call dest-table RT_CDPN_SIP_2_FXS
remote 10.124.50.56
interface fxs IF_FXS_00
route call dest-table RT_CDPN_FXS_2_SIP
subscriber-number 10
interface fxs IF_FXS_01
route call dest-table RT_CDPN_FXS_2_SIP
subscriber-number 20
interface fxs IF_FXS_02
route call dest-table RT_CDPN_FXS_2_SIP
subscriber-number 30
interface fxs IF_FXS_03
route call dest-table RT_CDPN_FXS_2_SIP
subscriber-number 40
interface sip IF_SIP
bind gateway GW_SIP
service default
route call dest-table RT_CDPN_SIP_2_FXS
remote 10.124.50.55
interface fxs IF_FXS_04
route call dest-table RT_CDPN_FXS_2_SIP
subscriber-number 50
interface fxs IF_FXS_05
route call dest-table RT_CDPN_FXS_2_SIP
subscriber-number 60
interface fxs IF_FXS_06
route call dest-table RT_CDPN_FXS_2_SIP
subscriber-number 70
interface fxs IF_FXS_07
route call dest-table RT_CDPN_FXS_2_SIP
subscriber-number 80
context cs switch
no shutdown
gateway sip GW_SIP
bind interface IF_IP_ETH0 router
service default
gateway sip GW_SIP
no shutdown
port ethernet 0 0
medium auto
encapsulation ip
bind interface IF_IP_ETH0 router
no shutdown
port fxs 0 0
use profile fxs ch
encapsulation cc-fxs
bind interface IF_FXS_00 switch
no shutdown
port fxs 0 1
use profile fxs ch
encapsulation cc-fxs
bind interface IF_FXS_01 switch
no shutdown
port fxs 0 2
use profile fxs ch
encapsulation cc-fxs
bind interface IF_FXS_02 switch
no shutdown
port fxs 0 3
use profile fxs ch
encapsulation cc-fxs
bind interface IF_FXS_03 switch
no shutdown
port fxs 0 4
use profile fxs ch
encapsulation cc-fxs
bind interface IF_FXS_04 switch
no shutdown
port fxs 0 5
use profile fxs ch
encapsulation cc-fxs
bind interface IF_FXS_05 switch
no shutdown
port fxs 0 6
use profile fxs ch
encapsulation cc-fxs
bind interface IF_FXS_06 switch
no shutdown
port fxs 0 7
use profile fxs ch
encapsulation cc-fxs
bind interface IF_FXS_07 switch
no shutdown
Hier habe ich die Konfiguration von Station B:
Code:
#----------------------------------------------------------------#
# #
# SN4118/4JS4JO/EUI #
# R3.20 2006-07-27 H323 SIP FXS FXO #
# 2007-01-24T05:31:27 #
# Generated configuration file #
# Für 10.124.50.56 #
#----------------------------------------------------------------#
cli version 3.20
webserver port 80 language en
sntp-client
sntp-client server primary 129.132.2.21 port 123 version 4
system hostname 10.124.50.56
system
ic voice 0
low-bitrate-codec g729
profile ppp default
profile tone-set default
profile voip default
codec 1 g729 rx-length 20 tx-length 20
codec 2 g711alaw64k rx-length 20 tx-length 20
codec 3 g711ulaw64k rx-length 20 tx-length 20
fax transmission 1 relay t38-udp
fax redundancy low-speed 1 high-speed 1
modem transmission 1 bypass g711alaw64k
profile pstn default
profile sip default
profile aaa default
method 1 local
method 2 none
context ip router
interface IF_IP_ETH0
ipaddress 10.124.50.56 255.255.255.0
context ip router
route 0.0.0.0 0.0.0.0 10.124.50.65 0
context cs switch
routing-table calling-e164 RT_CLPN_SIP_2_FXO
route 10 dest-interface IF_FXO_00
route 20 dest-interface IF_FXO_01
route 30 dest-interface IF_FXO_02
route 40 dest-interface IF_FXO_03
routing-table called-e164 RT_CDPN_FXO_00_2_SIP
route default dest-interface IF_SIP MAP_CDPN_FXO_00
routing-table called-e164 RT_CDPN_FXO_01_2_SIP
route default dest-interface IF_SIP MAP_CDPN_FXO_01
routing-table called-e164 RT_CDPN_FXO_02_2_SIP
route default dest-interface IF_SIP MAP_CDPN_FXO_02
routing-table called-e164 RT_CDPN_FXO_03_2_SIP
route default dest-interface IF_SIP MAP_CDPN_FXO_03
mapping-table called-e164 to called-e164 MAP_CDPN_FXO_00
map default to 10
mapping-table called-e164 to called-e164 MAP_CDPN_FXO_01
map default to 20
mapping-table called-e164 to called-e164 MAP_CDPN_FXO_02
map default to 30
mapping-table called-e164 to called-e164 MAP_CDPN_FXO_03
map default to 40
interface sip IF_SIP
bind gateway GW_SIP
service default
route call dest-table RT_CLPN_SIP_2_FXO
remote 10.124.50.57
interface fxo IF_FXO_00
route call dest-table RT_CDPN_FXO_00_2_SIP
interface fxo IF_FXO_01
route call dest-table RT_CDPN_FXO_01_2_SIP
interface fxo IF_FXO_02
route call dest-table RT_CDPN_FXO_02_2_SIP
interface fxo IF_FXO_03
route call dest-table RT_CDPN_FXO_03_2_SIP
context cs switch
no shutdown
gateway sip GW_SIP
bind interface IF_IP_ETH0 router
service default
gateway sip GW_SIP
no shutdown
port ethernet 0 0
medium auto
encapsulation ip
bind interface IF_IP_ETH0 router
no shutdown
port fxs 0 0
no shutdown
port fxs 0 1
no shutdown
port fxs 0 2
no shutdown
port fxs 0 3
no shutdown
port fxo 0 0
use profile fxo ch
encapsulation cc-fxo
bind interface IF_FXO_00 switch
no shutdown
port fxo 0 1
use profile fxo ch
encapsulation cc-fxo
bind interface IF_FXO_01 switch
no shutdown
port fxo 0 2
use profile fxo ch
encapsulation cc-fxo
bind interface IF_FXO_02 switch
no shutdown
port fxo 0 3
use profile fxo ch
encapsulation cc-fxo
bind interface IF_FXO_03 switch
no shutdown
Hier habe ich die Konfiguration von Station C:
Code:
#----------------------------------------------------------------#
# #
# SN4114/JO/EUI #
# R3.20 2006-07-27 H323 SIP FXS FXO #
# 2007-02-26T19:11:04 #
# Generated configuration file #
# Für 10.124.50.55 #
#----------------------------------------------------------------#
cli version 3.20
webserver port 80 language en
sntp-client
sntp-client server primary 129.132.2.21 port 123 version 4
system hostname 10.124.50.55
system
ic voice 0
low-bitrate-codec g729
profile ppp default
profile tone-set default
profile voip default
codec 1 g729 rx-length 20 tx-length 20
codec 2 g711alaw64k rx-length 20 tx-length 20
codec 3 g711ulaw64k rx-length 20 tx-length 20
fax transmission 1 relay t38-udp
fax redundancy low-speed 1 high-speed 1
modem transmission 1 bypass g711alaw64k
profile pstn default
profile sip default
profile aaa default
method 1 local
method 2 none
context ip router
interface IF_IP_ETH0
ipaddress 10.124.50.55 255.255.255.0
context ip router
route 0.0.0.0 0.0.0.0 10.124.50.65 0
context cs switch
routing-table calling-e164 RT_CLPN_SIP_2_FXO
route 50 dest-interface IF_FXO_00
route 60 dest-interface IF_FXO_01
route 70 dest-interface IF_FXO_02
route 80 dest-interface IF_FXO_03
routing-table called-e164 RT_CDPN_FXO_00_2_SIP
route default dest-interface IF_SIP MAP_CDPN_FXO_00
routing-table called-e164 RT_CDPN_FXO_01_2_SIP
route default dest-interface IF_SIP MAP_CDPN_FXO_01
routing-table called-e164 RT_CDPN_FXO_02_2_SIP
route default dest-interface IF_SIP MAP_CDPN_FXO_02
routing-table called-e164 RT_CDPN_FXO_03_2_SIP
route default dest-interface IF_SIP MAP_CDPN_FXO_03
mapping-table called-e164 to called-e164 MAP_CDPN_FXO_00
map default to 50
mapping-table called-e164 to called-e164 MAP_CDPN_FXO_01
map default to 60
mapping-table called-e164 to called-e164 MAP_CDPN_FXO_02
map default to 70
mapping-table called-e164 to called-e164 MAP_CDPN_FXO_03
map default to 80
interface sip IF_SIP
bind gateway GW_SIP
service default
route call dest-table RT_CLPN_SIP_2_FXO
remote 10.124.50.57
interface fxo IF_FXO_00
route call dest-table RT_CDPN_FXO_00_2_SIP
interface fxo IF_FXO_01
route call dest-table RT_CDPN_FXO_01_2_SIP
interface fxo IF_FXO_02
route call dest-table RT_CDPN_FXO_02_2_SIP
interface fxo IF_FXO_03
route call dest-table RT_CDPN_FXO_03_2_SIP
context cs switch
no shutdown
gateway sip GW_SIP
bind interface IF_IP_ETH0 router
service default
gateway sip GW_SIP
no shutdown
port ethernet 0 0
medium auto
encapsulation ip
bind interface IF_IP_ETH0 router
no shutdown
port fxo 0 0
use profile fxo ch
encapsulation cc-fxo
bind interface IF_FXO_00 switch
no shutdown
port fxo 0 1
use profile fxo ch
encapsulation cc-fxo
bind interface IF_FXO_01 switch
no shutdown
port fxo 0 2
use profile fxo ch
encapsulation cc-fxo
bind interface IF_FXO_02 switch
no shutdown
port fxo 0 3
use profile fxo ch
encapsulation cc-fxo
bind interface IF_FXO_03 switch
no shutdown
Kann mir vielleicht jemand weiterhelfen?
Gruss, Matthias.