Hallo,
ich habe die aktuelle Asterisk 1.4.3 mit den Sirrix Treibern 070330 im Einsatz.
Der Anlagenanschluss funktioniert tadellos, aber der interne S0-Bus mit dem Fax funktioniert leider nicht
Ich habe sowohl einen FaxServer mit Fritz!Card, als auch ein analoges Fax mit a/b-wandler (Eumex 100) getestet.
Hier meine Sirrix.conf (Anlagenanschluss aus Platzgründen rausgenommen):
Hier ein Ausschnitt aus Extensions.conf:
Wenn ich nun einen Reload vom Asterisk mache und auf die 55 anrufe, bekomme ich folgende Error am CLI. Die 100Ohm Anschlusswiederstände hatte ich auch schon mal gesetzt... das brachte keine Besserung...
Hat jemand eine Idee, wo das Problem liegt, oder was ich noch machen könnte!?!
Vielen Dank im Vorraus!
MfG Markus
ich habe die aktuelle Asterisk 1.4.3 mit den Sirrix Treibern 070330 im Einsatz.
Der Anlagenanschluss funktioniert tadellos, aber der interne S0-Bus mit dem Fax funktioniert leider nicht
Ich habe sowohl einen FaxServer mit Fritz!Card, als auch ein analoges Fax mit a/b-wandler (Eumex 100) getestet.
Hier meine Sirrix.conf (Anlagenanschluss aus Platzgründen rausgenommen):
PHP:
;;;;;;;;;;;;;;;;
;; Global
;;;;;;;;;;;;;;;;
[Global]
internationalprefix = 00
nationalprefix = 0
countrycode = 49
strip_countrycode = yes
areacode = 851
strip_areacode = no
notify_time = 60
;;;;;;;;;;;;;;;;
;; Group: ISDN-FAX
;;;;;;;;;;;;;;;;
[isdn-fax]
mode = NT ; NT-Mode for internal Devicees
ptp = no ; PTP = no = Mehrgeräteanschluss
ports = 0000 ; Port 0 on Srx-Card
context = fax-in ; Context for incoming faxes
echocancel = yes ; Echocancel einschalten
number = 915+ ; Number+Extension
extension = ; nothing
Hier ein Ausschnitt aus Extensions.conf:
PHP:
[intern]
;; Faxe an Exchange Server weiterleiten
exten => 55,1,NoOP(Fax an Exchange Server weiterleiten)
exten => 55,n,Dial(Srx/gfax-in/91555)
exten => 55,n,Hangup()
Wenn ich nun einen Reload vom Asterisk mache und auf die 55 anrufe, bekomme ich folgende Error am CLI. Die 100Ohm Anschlusswiederstände hatte ich auch schon mal gesetzt... das brachte keine Besserung...
PHP:
ares*CLI>
[Apr 30 11:54:12] NOTICE[3829]: layer1_user.cpp:310 l1u_from_kernel: L1M1_STARTUP|CONFIRM for port 0000
[Apr 30 11:54:12] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G_RESET
[Apr 30 11:54:12] NOTICE[3829]: layer1_user.cpp:264 l1u_from_kernel: L1L2_PH_DEACTIVATE|INDICATION, port=0000
[Apr 30 11:54:12] NOTICE[3829]: layer1_user.cpp:346 l1u_from_kernel: L1M1_MPH_DEACTIVATE|INDICATION for port 0000
[Apr 30 11:54:12] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G4_WAIT_FOR_NDR
[Apr 30 11:54:12] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G2_PENDING_ACTIVATION
ares*CLI>
[Apr 30 11:54:15] NOTICE[3816]: chan_iax2.c:5640 update_registry: Restricting registration for peer 'iaxmodem' to 60 seconds (requested 50)
[Apr 30 11:54:27] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G4_PENDING_DEACTIVATION
[Apr 30 11:54:27] NOTICE[3829]: layer1_user.cpp:264 l1u_from_kernel: L1L2_PH_DEACTIVATE|INDICATION, port=0000
[Apr 30 11:54:27] NOTICE[3829]: layer1_user.cpp:346 l1u_from_kernel: L1M1_MPH_DEACTIVATE|INDICATION for port 0000
[Apr 30 11:54:27] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G4_WAIT_FOR_NDR
[Apr 30 11:54:27] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G1_DEACTIVATED_DI
[Apr 30 11:54:34] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G1_DEACTIVATED_TIM
[Apr 30 11:54:34] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G2_PENDING_ACTIVATION
[Apr 30 11:54:34] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G3_ACTIVATED
[Apr 30 11:54:34] NOTICE[3829]: layer1_user.cpp:259 l1u_from_kernel: L1L2_PH_ACTIVATE|INDICATION, port=0000
[Apr 30 11:54:34] NOTICE[3829]: layer1_user.cpp:333 l1u_from_kernel: L1M1_MPH_ACTIVATE|INDICATION for port 0000
[Apr 30 11:54:34] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G2_LOST_FRAMING
[Apr 30 11:54:34] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G3_ACTIVATED
[Apr 30 11:54:34] NOTICE[3829]: layer1_user.cpp:259 l1u_from_kernel: L1L2_PH_ACTIVATE|INDICATION, port=0000
[Apr 30 11:54:34] NOTICE[3829]: layer1_user.cpp:333 l1u_from_kernel: L1M1_MPH_ACTIVATE|INDICATION for port 0000
[Apr 30 11:54:34] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G2_LOST_FRAMING
[Apr 30 11:54:34] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G3_ACTIVATED
[Apr 30 11:54:34] NOTICE[3829]: layer1_user.cpp:259 l1u_from_kernel: L1L2_PH_ACTIVATE|INDICATION, port=0000
[Apr 30 11:54:34] NOTICE[3829]: layer1_user.cpp:333 l1u_from_kernel: L1M1_MPH_ACTIVATE|INDICATION for port 0000
[Apr 30 11:54:34] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G2_LOST_FRAMING
[Apr 30 11:54:34] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G3_ACTIVATED
[Apr 30 11:54:34] NOTICE[3829]: layer1_user.cpp:259 l1u_from_kernel: L1L2_PH_ACTIVATE|INDICATION, port=0000
[Apr 30 11:54:34] NOTICE[3829]: layer1_user.cpp:333 l1u_from_kernel: L1M1_MPH_ACTIVATE|INDICATION for port 0000
-- Executing [55@technik:1] NoOp("SIP/222-0821c338", "Fax an Exchange Server weiterleiten") in new stack
-- Executing [55@technik:2] Dial("SIP/222-0821c338", "Srx/gisdn-fax/915055") in new stack
[Apr 30 11:55:05] NOTICE[9767]: chan_sirrix_helper.c:2232 cc_reserve_chan: srxpvt=0x81f8840 port=0000 chan=01
[Apr 30 11:55:05] NOTICE[9767]: chan_sirrix_helper.c:2119 cc_force_chan: srxpvt=0x81f8840 port=0000 chan=ff chan_reserved=01 pref=01 force=1
[Apr 30 11:55:05] NOTICE[9767]: chan_sirrix_helper.c:1984 cc_bch_stop_read_sub: srxpvt=0x81f8840 port=0x0000 chan=01 sub=0 bch->fd=30 st=00
[Apr 30 11:55:05] NOTICE[9767]: chan_sirrix_helper.c:2002 cc_bch_start_write_sub: srxpvt=0x81f8840 port=0x0000 chan=01 sub=0 bch->fd=30 st=00
[Apr 30 11:55:05] NOTICE[9767]: chan_sirrix_helper.c:1984 cc_bch_stop_read_sub: srxpvt=0x81f8840 port=0x0000 chan=01 sub=1 bch->fd=31 st=00
[Apr 30 11:55:05] NOTICE[9767]: chan_sirrix_helper.c:2020 cc_bch_stop_write_sub: srxpvt=0x81f8840 port=0x0000 chan=01 sub=1 bch->fd=31 st=00
[Apr 30 11:55:05] NOTICE[9767]: chan_sirrix_helper.c:2095 cc_open_chan: srxpvt=0x81f8840 port=0000 chan=01 pref=ff
[Apr 30 11:55:05] NOTICE[9767]: chan_sirrix_helper.c:2119 cc_force_chan: srxpvt=0x81f8840 port=0000 chan=01 chan_reserved=ff pref=ff force=0
CCMSG OUT: port=0000, l3=0x8233348, type=00400150=CC_SETUP | REQUEST
-- Called gisdn-fax/915055
[Apr 30 11:55:05] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G2_LOST_FRAMING
[Apr 30 11:55:05] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G3_ACTIVATED
[Apr 30 11:55:05] NOTICE[3829]: layer1_user.cpp:259 l1u_from_kernel: L1L2_PH_ACTIVATE|INDICATION, port=0000
[Apr 30 11:55:05] NOTICE[3829]: layer1_user.cpp:333 l1u_from_kernel: L1M1_MPH_ACTIVATE|INDICATION for port 0000
[Apr 30 11:55:05] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G2_LOST_FRAMING
[Apr 30 11:55:05] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G3_ACTIVATED
[Apr 30 11:55:05] NOTICE[3829]: layer1_user.cpp:259 l1u_from_kernel: L1L2_PH_ACTIVATE|INDICATION, port=0000
[Apr 30 11:55:05] NOTICE[3829]: layer1_user.cpp:333 l1u_from_kernel: L1M1_MPH_ACTIVATE|INDICATION for port 0000
[Apr 30 11:55:05] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G2_LOST_FRAMING
[Apr 30 11:55:05] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G3_ACTIVATED
[Apr 30 11:55:05] NOTICE[3829]: layer1_user.cpp:259 l1u_from_kernel: L1L2_PH_ACTIVATE|INDICATION, port=0000
[Apr 30 11:55:05] NOTICE[3829]: layer1_user.cpp:333 l1u_from_kernel: L1M1_MPH_ACTIVATE|INDICATION for port 0000
[Apr 30 11:55:05] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G2_LOST_FRAMING
[Apr 30 11:55:05] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G3_ACTIVATED
[Apr 30 11:55:05] NOTICE[3829]: layer1_user.cpp:259 l1u_from_kernel: L1L2_PH_ACTIVATE|INDICATION, port=0000
[Apr 30 11:55:05] NOTICE[3829]: layer1_user.cpp:333 l1u_from_kernel: L1M1_MPH_ACTIVATE|INDICATION for port 0000
[Apr 30 11:55:05] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G2_LOST_FRAMING
[Apr 30 11:55:05] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G3_ACTIVATED
[Apr 30 11:55:05] NOTICE[3829]: layer1_user.cpp:259 l1u_from_kernel: L1L2_PH_ACTIVATE|INDICATION, port=0000
[Apr 30 11:55:05] NOTICE[3829]: layer1_user.cpp:333 l1u_from_kernel: L1M1_MPH_ACTIVATE|INDICATION for port 0000
[Apr 30 11:55:05] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G2_LOST_FRAMING
[Apr 30 11:55:05] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G3_ACTIVATED
[Apr 30 11:55:05] NOTICE[3829]: layer1_user.cpp:259 l1u_from_kernel: L1L2_PH_ACTIVATE|INDICATION, port=0000
[Apr 30 11:55:05] NOTICE[3829]: layer1_user.cpp:333 l1u_from_kernel: L1M1_MPH_ACTIVATE|INDICATION for port 0000
[Apr 30 11:55:09] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G2_LOST_FRAMING
[Apr 30 11:55:09] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G3_ACTIVATED
[Apr 30 11:55:09] NOTICE[3829]: layer1_user.cpp:259 l1u_from_kernel: L1L2_PH_ACTIVATE|INDICATION, port=0000
[Apr 30 11:55:09] NOTICE[3829]: layer1_user.cpp:333 l1u_from_kernel: L1M1_MPH_ACTIVATE|INDICATION for port 0000
[Apr 30 11:55:09] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G2_LOST_FRAMING
[Apr 30 11:55:09] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G3_ACTIVATED
[Apr 30 11:55:09] NOTICE[3829]: layer1_user.cpp:259 l1u_from_kernel: L1L2_PH_ACTIVATE|INDICATION, port=0000
[Apr 30 11:55:09] NOTICE[3829]: layer1_user.cpp:333 l1u_from_kernel: L1M1_MPH_ACTIVATE|INDICATION for port 0000
[Apr 30 11:55:09] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G2_LOST_FRAMING
[Apr 30 11:55:09] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G3_ACTIVATED
[Apr 30 11:55:09] NOTICE[3829]: layer1_user.cpp:259 l1u_from_kernel: L1L2_PH_ACTIVATE|INDICATION, port=0000
[Apr 30 11:55:09] NOTICE[3829]: layer1_user.cpp:333 l1u_from_kernel: L1M1_MPH_ACTIVATE|INDICATION for port 0000
[Apr 30 11:55:09] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G2_LOST_FRAMING
[Apr 30 11:55:09] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G3_ACTIVATED
[Apr 30 11:55:09] NOTICE[3829]: layer1_user.cpp:259 l1u_from_kernel: L1L2_PH_ACTIVATE|INDICATION, port=0000
[Apr 30 11:55:09] NOTICE[3829]: layer1_user.cpp:333 l1u_from_kernel: L1M1_MPH_ACTIVATE|INDICATION for port 0000
[Apr 30 11:55:09] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G2_LOST_FRAMING
[Apr 30 11:55:09] NOTICE[3829]: layer1_user.cpp:379 l1u_from_kernel: L1M1_STATUS|INDICATION for port 0000 with state ST_L1_IPAC_G3_ACTIVATED
[Apr 30 11:55:09] NOTICE[3829]: layer1_user.cpp:259 l1u_from_kernel: L1L2_PH_ACTIVATE|INDICATION, port=0000
[Apr 30 11:55:09] NOTICE[3829]: layer1_user.cpp:333 l1u_from_kernel: L1M1_MPH_ACTIVATE|INDICATION for port 0000
[Apr 30 11:55:10] NOTICE[3817]: chan_iax2.c:5640 update_registry: Restricting registration for peer 'iaxmodem' to 60 seconds (requested 50)
CCMSG IN: port=0000, l3=0x8233348, type=004001f2=CC_RELEASE | INDICATION, srxcisig=(nil), srxpvt=0x81f8840, srxpvt->owner=0x8261768
== CC_RELEASE|INDICATION: srxpvt->owner=0x8261768, srxpvt->owner->_state=3
[Apr 30 11:55:13] NOTICE[9767]: chan_sirrix_helper.c:2199 cc_release_chan: srxpvt=0x81f8840 port=0000 chan=01
== cc_handle_ccmsg: (CC_RELEASE|INDICATION) done
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing [55@technik:3] Hangup("SIP/222-0821c338", "") in new stack
== Spawn extension (technik, 55, 3) exited non-zero on 'SIP/222-0821c338'
ares*CLI>
Hat jemand eine Idee, wo das Problem liegt, oder was ich noch machen könnte!?!
Vielen Dank im Vorraus!
MfG Markus
Zuletzt bearbeitet: