Patton 4638 <-> sipgate: CONFIGURED SERVICE NOT AVALABLE

nikwest · 6 Sep 2007

Hallo,
bin gerade dabei unsere neue Patton in Betrieb zu nehmen. Nach dem die Grundkonfiguration (Patton zwischen ISDN-Anlagenanschluss und ISDN-Anlage geklemmt) zu funktionieren scheint würde ich gerne sipgate einbinden.

Ich habe Firmware release 3.21.

Die Patton scheint sich erfolgreich beim Sipgate registieren zu können, aber wenn ich einen Anfruf tätige dann bekomme ich;

Code:

patton(gw-sip)[GW_SIPG~]#21:26:10  SIP_ER> CONFIGURED SERVICE NOT AVALABLE

Anbei meine Konfig:

Code:

#----------------------------------------------------------------#
#                                                                #
# SN4638/5BIS/UI                                                 #
# R3.21 2007-07-13 H323 SIP BRI                                  #
# 2007-09-06T21:33:34                                            #
# Generated configuration file                                   #
#                                                                #
#----------------------------------------------------------------#

cli version 3.20
dns-client server 192.168.142.7
dns-client server 212.18.0.5
dns-relay
webserver port 80 language en
sntp-client
sntp-client server primary 192.168.142.7 port 123 version 4
system hostname patton
system contact "Dominik"

system

  ic voice 0
    low-bitrate-codec g729

profile napt NAPT_WAN

profile ppp default

profile tone-set default

profile voip default
  codec 1 g711alaw64k rx-length 20 tx-length 20
  codec 2 g711ulaw64k rx-length 20 tx-length 20

profile voip SIPGATE
  codec 1 g729 rx-length 20 tx-length 20
  codec 2 g711ulaw64k rx-length 20 tx-length 20
  codec 3 g711alaw64k rx-length 20 tx-length 20

profile pstn default

profile sip default

profile sip sipgate

profile dhcp-server DHCPS_LAN
  network 192.168.1.0 255.255.255.0
  include 1 192.168.1.10 192.168.1.99
  lease 2 hours
  default-router 1 192.168.1.1
  domain-name-server 1 192.168.1.1

profile aaa default
  method 1 local
  method 2 none

context ip router

  interface WAN
    ipaddress xx.xx.xx.xx 255.255.255.248
    use profile napt NAPT_WAN
    tcp adjust-mss rx mtu
    tcp adjust-mss tx mtu

  interface LAN
    ipaddress 192.168.142.1 255.255.255.0
    tcp adjust-mss rx mtu
    tcp adjust-mss tx mtu

context ip router
  dhcp-server use DHCPS_LAN
  route 0.0.0.0 0.0.0.0 xx.xx.xx.xx 0

context cs switch
  digit-collection timeout 2
  national-prefix 0
  international-prefix 00

  routing-table called-e164 RT_PHONE_2_PSTN
    route .T dest-service HUNT_PSTN

  routing-table calling-e164 RT_PSTN_2_PHONE

  interface isdn IF_S0_PSTN
    route call dest-interface IF_S0_PHONE
    dtmf-dialing

  interface isdn IF_S0_PHONE
    route call dest-table RT_PHONE_2_PSTN
    dtmf-dialing

  interface isdn IF_S1_PHONE
    route call dest-table RT_PHONE_2_PSTN
    dtmf-dialing

  interface isdn IF_S1_PSTN
    route call dest-interface IF_S1_PHONE
    dtmf-dialing

  interface sip IF_SIP_SIPGATE
    bind gateway GW_SIPGATE
    service default
    route call dest-interface IF_S1_PHONE
    early-connect
    early-disconnect
    address-translation outgoing-call from-header user-part fix xxxxxxxx host-p$
    use profile voip SIPGATE

  service hunt-group HUNT_PSTN
    timeout 6
    drop-cause normal-unspecified
    drop-cause no-circuit-channel-available
    drop-cause network-out-of-order
    drop-cause temporary-failure
    drop-cause switching-equipment-congestion
    drop-cause access-info-discarded
    drop-cause circuit-channel-not-available
    drop-cause resources-unavailable
    route call 1 dest-interface IF_SIP_SIPGATE
    route call 2 dest-interface IF_S0_PSTN
    route call 3 dest-interface IF_S1_PSTN

context cs switch
  no shutdown

gateway sip GW_SIPGATE
  bind interface WAN router

  service logicunited
    domain sipgate.de
    realm sipgate.de
    defaultserver manual sipgate.de 5600 loose-router
    registration manual sipgate.de
    user xxxxxx authenticate password HSQy+xxxxxxx== encrypted defa$

gateway sip GW_SIPGATE
  no shutdown

port ethernet 0 0
  medium auto
  encapsulation ip
  bind interface WAN router
  no shutdown

port ethernet 0 1
  medium auto
  encapsulation ip
  bind interface LAN router
  no shutdown

port bri 0 0
  clock auto
  encapsulation q921
  power-feed

  q921
    protocol pp
    uni-side auto
    encapsulation q931

    q931
      protocol dss1
      uni-side user
      encapsulation cc-isdn
      bind interface IF_S0_PSTN switch

port bri 0 0
  no shutdown

port bri 0 1
  clock auto
  encapsulation q921

  q921
    protocol pp
    uni-side auto
    encapsulation q931

    q931
      protocol dss1
      uni-side net
      encapsulation cc-isdn
      bind interface IF_S0_PHONE switch

port bri 0 1
  no shutdown

port bri 0 2
  clock auto
  encapsulation q921
  power-feed

  q921
    protocol pp
    uni-side auto
    encapsulation q931

    q931
      protocol dss1
      uni-side user
      encapsulation cc-isdn
      bind interface IF_S1_PSTN switch

port bri 0 2
  no shutdown

port bri 0 3
  clock auto
  encapsulation q921

  q921
    protocol pp
    uni-side auto
    encapsulation q931

    q931
      protocol dss1
      uni-side net
      encapsulation cc-isdn
      bind interface IF_S1_PHONE switch

port bri 0 3
  no shutdown

port bri 0 4
  clock auto
  encapsulation q921

  q921
    protocol pmp
      uni-side net
      encapsulation cc-isdn
      bind interface IF_S1_PHONE switch

port bri 0 3
  no shutdown

port bri 0 4
  clock auto
  encapsulation q921

  q921
    protocol pmp
    uni-side auto
    encapsulation q931

    q931
      protocol dss1
      uni-side net

port bri 0 4
  shutdown

Der Status des sipgate gateways ist:

Code:

SIP Gateway: GW_SIPGATE
=======================

 State:                                 Up
 User Agent:                            0x7c21c8
 Local Address:                         xx.xx.xx.xx:5060
 Registrations

 SIP Registration: LogicUnited <sip:[email protected]> (Service: logicunited)
 -----------------------------------------------------------------------------

  State:                                Registered
  Registrar:                            sip:sipgate.de
  Used Registrar:                       sip:sipgate.de
  Default Server:                       (none)
  Logical Address:                      LogicUnited <sip:[email protected]>
  Physical Address:                     LogicUnited <sip:[email protected]:5060> (Current: LogicUnited <sip:[email protected]:5060>)
  Expiration Time:                      3600 s
  Authenticated:                        yes

 Allocated Endpoints:                   0
 Allocated Sessions:                    0
 Allocated Audio Datapath Controllers:  0
 Allocated Packets:                     1
 Max Allocated Packets:                 6
 Max Allocated Timers:                  10

Habe hier nur 3.20er Konfigs für sipgate gefunden :-(

Danke für Eure (hoffentlich) Hilfe

nikwest

nikwest · 9 Sep 2007

Habe den Fehler selbst gefunden.

An Stelle von:

Code:

 interface sip IF_SIP_SIPGATE
    bind gateway GW_SIPGATE
    service default
    route call dest-interface IF_S1_PHONE
    early-connect
    early-disconnect
    address-translation outgoing-call from-header user-part fix xxxxxxxx host-p$
    use profile voip SIPGATE

muss man den richtigen Servicenamen angeben.
Für meine Config ist das

Code:

 interface sip IF_SIP_SIPGATE
    bind gateway GW_SIPGATE
    service logicunited
    route call dest-interface IF_S1_PHONE
    early-connect
    early-disconnect
    address-translation outgoing-call from-header user-part fix xxxxxxxx host-p$
    use profile voip SIPGATE

Languages

Suche

Languages

Suche

Patton 4638 <-> sipgate: CONFIGURED SERVICE NOT AVALABLE

nikwest

Neuer User

nikwest

Neuer User

Zurzeit aktive Besucher

Neueste Beiträge

Statistik des Forums