Hallo,
bin gerade dabei unsere neue Patton in Betrieb zu nehmen. Nach dem die Grundkonfiguration (Patton zwischen ISDN-Anlagenanschluss und ISDN-Anlage geklemmt) zu funktionieren scheint würde ich gerne sipgate einbinden.
Ich habe Firmware release 3.21.
Die Patton scheint sich erfolgreich beim Sipgate registieren zu können, aber wenn ich einen Anfruf tätige dann bekomme ich;
Anbei meine Konfig:
Der Status des sipgate gateways ist:
Habe hier nur 3.20er Konfigs für sipgate gefunden :-(
Danke für Eure (hoffentlich) Hilfe
nikwest
bin gerade dabei unsere neue Patton in Betrieb zu nehmen. Nach dem die Grundkonfiguration (Patton zwischen ISDN-Anlagenanschluss und ISDN-Anlage geklemmt) zu funktionieren scheint würde ich gerne sipgate einbinden.
Ich habe Firmware release 3.21.
Die Patton scheint sich erfolgreich beim Sipgate registieren zu können, aber wenn ich einen Anfruf tätige dann bekomme ich;
Code:
patton(gw-sip)[GW_SIPG~]#21:26:10 SIP_ER> CONFIGURED SERVICE NOT AVALABLE
Anbei meine Konfig:
Code:
#----------------------------------------------------------------#
# #
# SN4638/5BIS/UI #
# R3.21 2007-07-13 H323 SIP BRI #
# 2007-09-06T21:33:34 #
# Generated configuration file #
# #
#----------------------------------------------------------------#
cli version 3.20
dns-client server 192.168.142.7
dns-client server 212.18.0.5
dns-relay
webserver port 80 language en
sntp-client
sntp-client server primary 192.168.142.7 port 123 version 4
system hostname patton
system contact "Dominik"
system
ic voice 0
low-bitrate-codec g729
profile napt NAPT_WAN
profile ppp default
profile tone-set default
profile voip default
codec 1 g711alaw64k rx-length 20 tx-length 20
codec 2 g711ulaw64k rx-length 20 tx-length 20
profile voip SIPGATE
codec 1 g729 rx-length 20 tx-length 20
codec 2 g711ulaw64k rx-length 20 tx-length 20
codec 3 g711alaw64k rx-length 20 tx-length 20
profile pstn default
profile sip default
profile sip sipgate
profile dhcp-server DHCPS_LAN
network 192.168.1.0 255.255.255.0
include 1 192.168.1.10 192.168.1.99
lease 2 hours
default-router 1 192.168.1.1
domain-name-server 1 192.168.1.1
profile aaa default
method 1 local
method 2 none
context ip router
interface WAN
ipaddress xx.xx.xx.xx 255.255.255.248
use profile napt NAPT_WAN
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu
interface LAN
ipaddress 192.168.142.1 255.255.255.0
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu
context ip router
dhcp-server use DHCPS_LAN
route 0.0.0.0 0.0.0.0 xx.xx.xx.xx 0
context cs switch
digit-collection timeout 2
national-prefix 0
international-prefix 00
routing-table called-e164 RT_PHONE_2_PSTN
route .T dest-service HUNT_PSTN
routing-table calling-e164 RT_PSTN_2_PHONE
interface isdn IF_S0_PSTN
route call dest-interface IF_S0_PHONE
dtmf-dialing
interface isdn IF_S0_PHONE
route call dest-table RT_PHONE_2_PSTN
dtmf-dialing
interface isdn IF_S1_PHONE
route call dest-table RT_PHONE_2_PSTN
dtmf-dialing
interface isdn IF_S1_PSTN
route call dest-interface IF_S1_PHONE
dtmf-dialing
interface sip IF_SIP_SIPGATE
bind gateway GW_SIPGATE
service default
route call dest-interface IF_S1_PHONE
early-connect
early-disconnect
address-translation outgoing-call from-header user-part fix xxxxxxxx host-p$
use profile voip SIPGATE
service hunt-group HUNT_PSTN
timeout 6
drop-cause normal-unspecified
drop-cause no-circuit-channel-available
drop-cause network-out-of-order
drop-cause temporary-failure
drop-cause switching-equipment-congestion
drop-cause access-info-discarded
drop-cause circuit-channel-not-available
drop-cause resources-unavailable
route call 1 dest-interface IF_SIP_SIPGATE
route call 2 dest-interface IF_S0_PSTN
route call 3 dest-interface IF_S1_PSTN
context cs switch
no shutdown
gateway sip GW_SIPGATE
bind interface WAN router
service logicunited
domain sipgate.de
realm sipgate.de
defaultserver manual sipgate.de 5600 loose-router
registration manual sipgate.de
user xxxxxx authenticate password HSQy+xxxxxxx== encrypted defa$
gateway sip GW_SIPGATE
no shutdown
port ethernet 0 0
medium auto
encapsulation ip
bind interface WAN router
no shutdown
port ethernet 0 1
medium auto
encapsulation ip
bind interface LAN router
no shutdown
port bri 0 0
clock auto
encapsulation q921
power-feed
q921
protocol pp
uni-side auto
encapsulation q931
q931
protocol dss1
uni-side user
encapsulation cc-isdn
bind interface IF_S0_PSTN switch
port bri 0 0
no shutdown
port bri 0 1
clock auto
encapsulation q921
q921
protocol pp
uni-side auto
encapsulation q931
q931
protocol dss1
uni-side net
encapsulation cc-isdn
bind interface IF_S0_PHONE switch
port bri 0 1
no shutdown
port bri 0 2
clock auto
encapsulation q921
power-feed
q921
protocol pp
uni-side auto
encapsulation q931
q931
protocol dss1
uni-side user
encapsulation cc-isdn
bind interface IF_S1_PSTN switch
port bri 0 2
no shutdown
port bri 0 3
clock auto
encapsulation q921
q921
protocol pp
uni-side auto
encapsulation q931
q931
protocol dss1
uni-side net
encapsulation cc-isdn
bind interface IF_S1_PHONE switch
port bri 0 3
no shutdown
port bri 0 4
clock auto
encapsulation q921
q921
protocol pmp
uni-side net
encapsulation cc-isdn
bind interface IF_S1_PHONE switch
port bri 0 3
no shutdown
port bri 0 4
clock auto
encapsulation q921
q921
protocol pmp
uni-side auto
encapsulation q931
q931
protocol dss1
uni-side net
port bri 0 4
shutdown
Der Status des sipgate gateways ist:
Code:
SIP Gateway: GW_SIPGATE
=======================
State: Up
User Agent: 0x7c21c8
Local Address: xx.xx.xx.xx:5060
Registrations
SIP Registration: LogicUnited <sip:[email protected]> (Service: logicunited)
-----------------------------------------------------------------------------
State: Registered
Registrar: sip:sipgate.de
Used Registrar: sip:sipgate.de
Default Server: (none)
Logical Address: LogicUnited <sip:[email protected]>
Physical Address: LogicUnited <sip:[email protected]:5060> (Current: LogicUnited <sip:[email protected]:5060>)
Expiration Time: 3600 s
Authenticated: yes
Allocated Endpoints: 0
Allocated Sessions: 0
Allocated Audio Datapath Controllers: 0
Allocated Packets: 1
Max Allocated Packets: 6
Max Allocated Timers: 10
Habe hier nur 3.20er Konfigs für sipgate gefunden :-(
Danke für Eure (hoffentlich) Hilfe
nikwest