Hallo Zäme
ich versuche schon seit Stunden das Smartnode 1200 zu konfigurieren.
Doch leider komme ich nicht weiter.
Es ist die Firmware 3.20 Sip Installiert. Das Gerät ist am Port ETH1 hinter dem Router Verbunden.
(Router: 192.168.1.2 - ZyXEL P-2602HWL-D1A ADSL-VoIP-Router für Analog)
(smartnode: 192.168.1.1 - intern 192.168.10.1)
Die Zeit Synchronisieren er einwandfrei. Somit denke ich, habe ich eine Verbindung ins Netz.
und das zeigt es mir an:
Edit Guard-X: Bitte Code-Tags verwenden und nicht verlinken, sondern direkt einfügen!
kann mir jemand weiterhelfen???
Besten Dank und Frohe Festtage
Markus
ich versuche schon seit Stunden das Smartnode 1200 zu konfigurieren.
Doch leider komme ich nicht weiter.
Es ist die Firmware 3.20 Sip Installiert. Das Gerät ist am Port ETH1 hinter dem Router Verbunden.
(Router: 192.168.1.2 - ZyXEL P-2602HWL-D1A ADSL-VoIP-Router für Analog)
(smartnode: 192.168.1.1 - intern 192.168.10.1)
Die Zeit Synchronisieren er einwandfrei. Somit denke ich, habe ich eine Verbindung ins Netz.
Code:
#----------------------------------------------------------------#
# #
# SN1200 #
# R3.20 2007-07-13 SIP #
# 2007-12-26T14:26:23 #
# Generated configuration file #
# #
#----------------------------------------------------------------#
cli version 3.20
gui type basic
dns-relay
webserver port 80 language de
sntp-client
sntp-client server primary 134.214.100.6 port 123 version 4
sntp-client gmt-offset + 01:00:00
system
ic voice 0
profile acl default
permit 1 ip any any
profile napt default
profile ppp default
profile tone-set default
profile voip default
codec 1 g711alaw64k rx-length 30 tx-length 30
codec 2 g711ulaw64k rx-length 30 tx-length 30
codec 3 g729 rx-length 30 tx-length 30
dejitter-mode static
dejitter-max-delay 120
fax transmission 1 relay t38-udp
profile pstn default
profile sip default
profile dhcp-server DHCPS_LAN
network 192.168.1.0 255.255.255.0
include 1 192.168.1.10 192.168.1.19
lease 2 hours
default-router 1 192.168.1.2
domain-name-server 1 192.168.1.2
domain-name smartnode.local
profile aaa default
method 1 local
method 2 none
context ip router
interface IF_IP_WAN
ipaddress dhcp
use profile acl default in
use profile acl default out
use profile napt default
interface IF_IP_LAN
ipaddress dhcp
icmp router-discovery
context ip router
dhcp-server use DHCPS_LAN
subscriber ppp SUB_PPPOE
context cs switch
routing-table called-e164 RT_CALL_ROUTING
route default dest-service SER_HG_PSTN_FALLBACK
route 0T3 dest-service SER_HG_PSTN_FALLBACK
route 1T3 dest-interface IF_S0_00
route 090T3 dest-interface IF_S0_00
route 080T3 dest-interface IF_S0_00
route 9T3 dest-interface IF_S0_00 MAP_REMOVE_PREFIX
routing-table called-e164 RT_INCOMING
route default dest-interface IF_S0_01 MAP_SIP_2_MSN
routing-table calling-e164 RT_PHONE_2_SIP
route default dest-interface IF_SIP_SERVICE CPFN_MSN_2_SIP
mapping-table called-e164 to called-e164 MAP_SIP_2_MSN
map SIP 1 to MSN 1
map SIP 2 to MSN 2
mapping-table calling-e164 to calling-uri MAP_MSN_2_SIPURI
map MSN 1 to sip:SIP [email protected]
map MSN 2 to sip:SIP [email protected]
mapping-table calling-e164 to calling-e164 MAP_MSN_2_SIP
map MSN 1 to SIP 1
map MSN 2 to SIP 2
mapping-table called-e164 to called-e164 MAP_REMOVE_PREFIX
map 9(.%) to \1
complex-function CPFN_MSN_2_SIP
execute 1 MAP_MSN_2_SIP
execute 2 MAP_MSN_2_SIPURI
interface isdn IF_S0_00
route call dest-interface IF_S0_01
interface isdn IF_S0_01
route call dest-table RT_CALL_ROUTING
isdn-date-time
interface sip IF_SIP_SERVICE
bind gateway GW_SIP
service default
route call dest-table RT_INCOMING
use profile voip VOIP
service hunt-group SER_HG_PSTN_FALLBACK
timeout 5
drop-cause normal-unspecified
drop-cause no-circuit-channel-available
drop-cause network-out-of-order
drop-cause temporary-failure
drop-cause switching-equipment-congestion
drop-cause access-info-discarded
drop-cause circuit-channel-not-available
drop-cause resources-unavailable
drop-cause no-route-to-destination
route call 1 dest-table RT_PHONE_2_SIP
route call 2 dest-interface IF_S0_00
context cs switch
no shutdown
gateway sip GW_SIP
no transport tcp
bind interface IF_IP_WAN router
service default
domain voipgateway.org
authentication SIP 1 password pwd
authentication SIP 2 password pwd
registration-lifetime 600
registrar voipgateway.org 5060
user SIP 1
user SIP 2
gateway sip GW_SIP
no shutdown
port ethernet 0 0
bind interface IF_IP_WAN router
no shutdown
port ethernet 0 1
bind interface IF_IP_LAN router
no shutdown
port bri 0 0
clock auto
encapsulation q921
q921
protocol pmp
uni-side auto
encapsulation q931
q931
protocol dss1
uni-side user
encapsulation cc-isdn
bind interface IF_S0_00 switch
port bri 0 0
no shutdown
port bri 0 1
clock auto
encapsulation q921
q921
protocol pmp
uni-side auto
encapsulation q931
q931
protocol dss1
uni-side net
encapsulation cc-isdn
bind interface IF_S0_01 switch
port bri 0 1
no shutdownund das zeigt es mir an:
Code:
State: Up
User Agent: 0xa94268
Local Address: 192.168.1.1:5060
Registrations
SIP Registration: 4141xxxxxx (Service: default)
-----------------------------------------------------------------------------------
State: Registering
Registrar: sip:212.117.200.148:5060 "geht auch mit voipgateway.org nicht"
Default Server: sip:212.117.200.148:5060
Logical Address: 4141xxxxxxx
Physical Address: 4141xxxxxxx (Current: 4141xxxxxxxx)
Expiration Time: 600 s
Authenticated: no
SIP Registration: 4141xxxxxxxxx (Service: default)
-----------------------------------------------------------------------------------
State: Registering
Registrar: sip:212.117.200.148:5060
Default Server: sip:212.117.200.148:5060
Logical Address: 4141xxxxxxxxx
Physical Address: 4141xxxxxxx(Current: 4141xxxxxxxx )
Expiration Time: 600 s
Authenticated: no
Allocated Endpoints: 0
Allocated Sessions: 0
Allocated Audio Datapath Controllers: 0
Allocated Packets: 2
Max Allocated Packets: 2
Max Allocated Timers: 8Edit Guard-X: Bitte Code-Tags verwenden und nicht verlinken, sondern direkt einfügen!
kann mir jemand weiterhelfen???
Besten Dank und Frohe Festtage
Markus
Zuletzt bearbeitet:
