SN 4638 Asterisk / Lizenz(en)

snaker

Neuer User
Mitglied seit
27 Sep 2005
Beiträge
44
Punkte für Reaktionen
0
Punkte
0
Hallo zusammen,

ich habe mir einen SN 4638 zugelegt und möchte diesen nun an meinem Asterisk anbinden.

Bis zur unten stehenden config habe ich es geschafft, aber ich kann keine Gespräche durchführen.

Eventuell kann mir jemand helfen und sagen was fehlt...
Fehlen eventuell Lizenzen?

Danke schon ein mal
Stefan

Code:
#----------------------------------------------------------------#
# #
# SN4638/5BIS #
# R5.3 2009-03-18 H323 SIP BRI #
# 2009-05-31T14:11:26 #
# SN/00A0BA048B72 #
# Generated configuration file #
# #
#----------------------------------------------------------------#
 
cli version 3.20
no terminal telnet
administrator admin password XXXXXXXXXXXX== encrypted
clock local offset +02:00
dns-client server 192.168.123.8
dns-client server 192.168.123.2
webserver port 80 language en
sntp-client
sntp-client server primary 192.168.123.2 port 123 version 3
system hostname vgw.xxx.local
 
system
 
ic voice 0
low-bitrate-codec g729
 
system
clock-source 1 bri 0 0
clock-source 2 bri 0 1
clock-source 3 bri 0 2
clock-source 4 bri 0 3
clock-source 5 bri 0 4
 
profile ppp default
 
profile tone-set default
 
profile voip default
codec 1 g711alaw64k rx-length 20 tx-length 20
codec 2 g711ulaw64k rx-length 20 tx-length 20
codec 3 g729 rx-length 20 tx-length 20
rtp traffic-class local-default
fax transmission 1 relay t38-udp
 
profile pstn default
 
profile sip default
 
profile aaa default
method 1 local
method 2 none
 
context ip router
rtp-port-range 16384 16481
 
interface eth0
ipaddress 192.168.123.25 255.255.255.0
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu
 
context cs switch
 
routing-table called-e164 RT_CDPN_OUT
 
mapping-table calling-pi to called-e164 MP_REM_CLIR
map restricted to +4926XXXXXXXXXX
 
interface isdn IF_S0_00
route call dest-table RT_CDPN_OUT
 
interface isdn IF_S0_01
route call dest-table RT_CDPN_OUT
 
interface isdn IF_S0_02
route call dest-table RT_CDPN_OUT
 
interface isdn IF_S0_03
 
interface sip 192.168.123.23
bind context sip-gateway SIP
remote 192.168.123.23 5060
 
context cs switch
no shutdown
 
authentication-service VOIP_AS_0
username Patton password XXXXXXXXXXXX== encrypted
 
location-service xxx.local
domain 1 eth0 5060
 
identity Patton
 
authentication outbound
authenticate 1 authentication-service VOIP_AS_0 username Patton
 
authentication inbound
authenticate 1 authentication-service VOIP_AS_0 username Patton
 
registration outbound
registrar 192.168.123.23 5060
proxy 1 192.168.123.23 5060
lifetime 3600
register auto
retry-timeout on-system-error 10
retry-timeout on-client-error 10
retry-timeout on-server-error 10
 
registration inbound
contact 192.168.123.23 5060 switch 192.168.123.23 priority 1000
 
context sip-gateway SIP
 
interface 192.168.123.23
bind interface eth0 context router port 5060
 
context sip-gateway SIP
bind location-service xxx.local
no shutdown
 
port ethernet 0 0
medium auto
encapsulation ip
bind interface eth0 router
 
vlan 123
map cos 0 to local-default
map cos 3 to local-voice
map cos 5 to local-voice
encapsulation ip
no shutdown
 
vlan 110
map cos 3 to local-voice
map cos 5 to local-voice
encapsulation ip
no shutdown
 
port ethernet 0 0
no shutdown
 
port ethernet 0 1
medium auto
encapsulation ip
shutdown
 
port bri 0 0
clock auto
encapsulation q921
 
q921
uni-side auto
encapsulation q931
 
q931
protocol dss1
uni-side net
bchan-number-order ascending
encapsulation cc-isdn
bind interface IF_S0_00 switch
 
port bri 0 0
shutdown
 
port bri 0 1
clock auto
encapsulation q921
 
q921
uni-side auto
encapsulation q931
 
q931
protocol dss1
uni-side net
bchan-number-order ascending
encapsulation cc-isdn
bind interface IF_S0_01 switch
 
port bri 0 1
shutdown
 
port bri 0 2
clock auto
encapsulation q921
 
q921
uni-side auto
encapsulation q931
 
q931
protocol dss1
uni-side net
bchan-number-order ascending
encapsulation cc-isdn
bind interface IF_S0_02 switch
 
port bri 0 2
shutdown
 
port bri 0 3
clock auto
power-feed
encapsulation q921
 
q921
uni-side auto
encapsulation q931
 
q931
protocol dss1
uni-side user
bchan-number-order ascending
encapsulation cc-isdn
bind interface IF_S0_03 switch
 
port bri 0 3
shutdown
 
port bri 0 4
clock auto
encapsulation q921
 
q921
uni-side auto
encapsulation q931
 
q931
protocol dss1
uni-side net
bchan-number-order ascending
 
port bri 0 4
shutdown

Edit Guard-X: Bitte nächstes Mal Code-Tags verwenden!
 
Zuletzt bearbeitet:
Hallo!

Ich verwende noch immer die SW 4.2 un dort sieht eine Konfiguration mit asterisk so aus:

Code:
context cs switch
digit-collection timeout 2
national-prefix 0
international-prefix 00
 
routing-table called-e164 RT_von_ISDN_zu_SIP
route (.%)T dest-interface SIP_INFOTECH ZU_ASTERISK
routing-table called-e164 RT_von_SIP_zu_ISDN
route default dest-service HUNT-BRI
route 0043T dest-service HUNT-BRI MT_AUSGEHEND_0043
 
mapping-table called-e164 to called-e164 ZU_ASTERSIK
map 7(..) to 7\1
map (..) to \1
map default to 111
 
mapping-table called-e164 to called-e164 MT_AUSGEHEND_0043
map 0043(.%) to 0\1
 
interface isdn ISDN_00
route call dest-table RT_von_ISDN_zu_SIP
isdn-date-time
inband-info accept force call-setup call-proceeding
 
interface isdn ISDN_01
route call dest-table RT_von_ISDN_zu_SIP
isdn-date-time
inband-info accept force call-setup call-proceeding
 
interface isdn ISDN_02
route call dest-table RT_von_ISDN_zu_SIP
isdn-date-time
inband-info accept force call-setup call-proceeding
 
interface isdn ISDN_03
route call dest-table RT_von_ISDN_zu_SIP
isdn-date-time
inband-info accept force call-setup call-proceeding
 
interface sip SIP_ASTERISK
bind gateway GW_SIP
service default
route call dest-table RT_von_SIP_zu_ISDN
remote 192.168.45.10
early-disconnect
 
service hunt-group HUNT-BRI
cyclic
timeout 1
drop-cause normal-unspecified
drop-cause no-circuit-channel-available
drop-cause network-out-of-order
drop-cause temporary-failure
drop-cause switching-equipment-congestion
drop-cause access-info-discarded
drop-cause circuit-channel-not-available
drop-cause resources-unavailable
route call 1 dest-interface ISDN_00
route call 2 dest-interface ISDN_01
route call 3 dest-interface ISDN_02
route call 4 dest-interface ISDN_03
 
context cs switch
no shutdown
 
gateway sip GW_SIP
bind interface LAN router
 
service default
 
gateway sip GW_SIP
no shutdown

Edit Guard-X: Bitte nächstes Mal Code Tags verwenden!
 
Hallo und Danke,

Die Config ist also im großen und ganzem in Ordnung.

Der Fehler lag also an meiner Asterisk Config, wo ich der Extension ein Passwort eingebaut hatte...

Gruß
Stefan
 
Der Fehler lag also an meiner Asterisk Config, wo ich der Extension ein Passwort eingebaut hatte...
Das müsste also schon gehen. Muss dann auf dem Patton unter interface sip bzw. dem service default eingetragen werden:
Code:
interface sip SIP_ASTERISK
...
service default
user <extension> authenticate password <..> register
Für mehr Infos siehe SmartWare Software Configuration Guide.
 

Neueste Beiträge

Statistik des Forums

Themen
244,695
Beiträge
2,216,687
Mitglieder
371,314
Neuestes Mitglied
Gjorstn
Holen Sie sich 3CX - völlig kostenlos!
Verbinden Sie Ihr Team und Ihre Kunden Telefonie Livechat Videokonferenzen

Gehostet oder selbst-verwaltet. Für bis zu 10 Nutzer dauerhaft kostenlos. Keine Kreditkartendetails erforderlich. Ohne Risiko testen.

3CX
Für diese E-Mail-Adresse besteht bereits ein 3CX-Konto. Sie werden zum Kundenportal weitergeleitet, wo Sie sich anmelden oder Ihr Passwort zurücksetzen können, falls Sie dieses vergessen haben.