SPA942 - Passwort vergessen

.....The very first thing to do is try to reset the device again by using **** and then 73738# as per the original instructions...
By the way, if you are prompted for a password, try any of these: 78196365#, 50274537#, 7756112#, 8995523#, 5465866# (and if one works, then hit 1 to confirm).

Zum Vergrößern anklicken....

We had read that you could change the user and admin passwords to known values by feeding it an XML file that looks like this:

Code:

<flat-profile>
   <Admin_Passwd>4321</Admin_Passwd>
   <Enable_Web_Server ua="na">Yes</Enable_Web_Server>
   <Web_Server_Port ua="na">80</Web_Server_Port>
   <Enable_Web_Admin_Access ua="na">Yes</Enable_Web_Admin_Access>
   <Protect_IVR_FactoryReset ua="na">No</Protect_IVR_FactoryReset>
   <User_Password ua="na">1234</User_Password>
</flat-profile>

The above is a plain text file that should be saved using the filename 666666666666.xml (where the 6's are the MAC of your PAP-2) - basically it replaces the XML file you obtained from Vonage in an earlier step, and should be placed in the TFTP server root directory and any other directory where you had to place the original XML file (be sure you delete/overwrite any copies of the original XML file that you downloaded earlier).

Zum Vergrößern anklicken....

This is how I did a reset on my PAP2:
I opened the box to find a two pin jumper for three pins available on
the board. I kept the device ON, (I used NONSTATIC gloves) pluged off
the jumper from the second and the third pins and connected it to the
first and second pins. Then I punched in "****" and "FACTRESET" and
then "1" on the telephone connected to the PAP2. It announced that it
did RESET successfully. I then switched of the PAP2 and reverted the
jumper back to its second and third pin position and closed the box. I
had the PAP2 unlocked!

Zum Vergrößern anklicken....

A. In order to reset your SPA device to the factory default values, complete these steps.

1. Unplug your Ethernet cable.
2. Press **** in order to access the voice menu.
3. Press 73738#.
4. Login with the username user when you access http://spa-ip-address.
5. Login with admin when you access http://spa-ip-address/admin/.

Note: If you reset your device, it erases all your current configuration settings. If your SPA device is provisioned by a service provider, the reset function can be password protected. In this case, contact your service provider.

Zum Vergrößern anklicken....

Q. How do I enable the Admin web access (http) from the phone?


A. Complete these steps:

1. From the IVR (voice menu), press 723646#.
2. Press 1 in order to enable web admin access. 0, or No on the web, is the default and disables it.

Q. How do I enable access to the SPA2102 Web Interface?


A. Complete these steps:

1. Use the analog phone and press ****.
2. From the IVR (voice menu), press 7932#.
3. In order to enable this feature, press 1 and 1 again.

Q. How do I enable access to the SPA3102 Web Interface?


A. Complete these steps:

1. Use the analog phone and press ****.
2. From the IVR (voice menu), press 7932#.
3. In order to enable this feature, press 1. Now you can access the web server configuration screens.

Note: You can press 110 in order to learn your IP address.

Zum Vergrößern anklicken....