Hallo Forum,
auch wenn ich in diesem Forum (und beim Thema Asterisk) neu bin, weiß ich, dass man erst Suchen und dann Posten/Fragen sollte
Nun, das Suchen habe ich erfolglos hinter mir... nun zu meiner Frage:
Nachdem ich entdeckt habe, dass es Asterisk auch komfortabel als selbst installierendes ISO gibt (http://asterisk.de.ms/) wollte ich damit anfangen meine ersten Schritte mit Asterisk zu tun.
Alles hat prima funktioniert (zumindest sieht es für mich so aus) - alle relevanten Module sind geladen:
Das Alles sieht für mich als Nicht-ISDN-Linux Kenner ganz gut aus, aber trotzdem erhalte ich beim Versuch Asterisk zu starten folgende Fehlermeldung:
Vielleicht kann mir jemand einen Tip geben woran das liegen könnte!?
Als Hardware kommt eine Fritz-PCI Karte (Telekom-Label) zum Einsatz...
Und dies scheint meine Version zu sein: Asterisk CVS-05/31/04-22:00:51
Vielen Dank im Voraus...
techno.kid
auch wenn ich in diesem Forum (und beim Thema Asterisk) neu bin, weiß ich, dass man erst Suchen und dann Posten/Fragen sollte
Nun, das Suchen habe ich erfolglos hinter mir... nun zu meiner Frage:
Nachdem ich entdeckt habe, dass es Asterisk auch komfortabel als selbst installierendes ISO gibt (http://asterisk.de.ms/) wollte ich damit anfangen meine ersten Schritte mit Asterisk zu tun.
Alles hat prima funktioniert (zumindest sieht es für mich so aus) - alle relevanten Module sind geladen:
Code:
asterisk:/# lsmod
Module Size Used by Tainted: P
fcpci 539904 1
capi 17184 0
capifs 3552 1 [capi]
kernelcapi 29728 2 [fcpci capi]
capiutil 22400 0 [kernelcapi]
soundcore 3396 0 (autoclean)
ipx 15124 0
appletalk 19180 0
isdn 121248 1
slhc 4560 0 [isdn]
usb-uhci 21284 0 (unused)
usbcore 55520 1 [usb-uhci]
ide-scsi 9152 0
eepro100 18092 1
mii 2320 0 [eepro100]
parport_pc 25000 1 (autoclean)
lp 6368 0 (autoclean)
parport 21920 1 (autoclean) [parport_pc lp]
ext3 75680 1 (autoclean)
jbd 43684 1 (autoclean) [ext3]
unix 14020 59 (autoclean)
asterisk:/# capiinit
1 fcpci running fritz-pci A1 3.09-10 0x3000 5
asterisk:/# capiinfo
Controller 1:
Manufacturer: AVM GmbH
CAPI Version: 2.0
Manufacturer Version: 3.09-10 (48.154)
Serial Number: 1000001
BChannels: 2
Global Options: 0x00000039
internal controller supported
DTMF supported
Supplementary Services supported
channel allocation supported (leased lines)
B1 protocols support: 0x4000011f
64 kbit/s with HDLC framing
64 kbit/s bit-transparent operation
V.110 asynconous operation with start/stop byte framing
V.110 synconous operation with HDLC framing
T.30 modem for fax group 3
Modem asyncronous operation with start/stop byte framing
B2 protocols support: 0x00000b1b
ISO 7776 (X.75 SLP)
Transparent
LAPD with Q.921 for D channel X.25 (SAPI 16)
T.30 fro fax group 3
ISO 7776 (X.75 SLP) with V.42bis compression
V.120 asyncronous mode
V.120 bit-transparent mode
B3 protocols support: 0x800000bf
Transparent
T.90NL, T.70NL, T.90
ISO 8208 (X.25 DTE-DTE)
X.25 DCE
T.30 for fax group 3
reserved
0100
0200
39000000
1f010040
1b0b0000
bf000080
00000000 00000000 00000000 00000000 00000000 00000000
01000001 00020000 00000000 00000000 00000000
Supplementary services support: 0x000003ff
Hold / Retrieve
Terminal Portability
ECT
3PTY
Call Forwarding
Call Deflection
MCID
CCBS
Das Alles sieht für mich als Nicht-ISDN-Linux Kenner ganz gut aus, aber trotzdem erhalte ich beim Versuch Asterisk zu starten folgende Fehlermeldung:
Code:
Oct 17 01:09:07 NOTICE[1024]: CAPI not installed!
Oct 17 01:09:07 WARNING[1024]: chan_capi.so: load_module failed, returning -1
Oct 17 01:09:07 WARNING[1024]: Unable to unregister from CAPI!
Oct 17 01:09:07 WARNING[1024]: Loading module chan_capi.so failed!
Vielleicht kann mir jemand einen Tip geben woran das liegen könnte!?
Als Hardware kommt eine Fritz-PCI Karte (Telekom-Label) zum Einsatz...
Und dies scheint meine Version zu sein: Asterisk CVS-05/31/04-22:00:51
Vielen Dank im Voraus...
techno.kid