Eingehenden Anrufe von ISDN auf HFC

;
zapata.conf


; Zapata telephony interface
;
; Configuration file

[trunkgroups]

[channels]

language=en
context=from-pstn
;signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes

switchtype = euroisdn

; p2mp TE mode
;signalling = bri_cpe_ptmp
; p2p TE mode
signalling = bri_cpe
; p2mp NT mode
;signalling = bri_net_ptmp
; p2p NT mode
;signalling = bri_net

pridialplan=local
prilocaldialplan=local
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
rxgain=0.0
txgain=0.0
group=0
callgroup=1
pickupgroup=1
immediate=yes
channel => 1-2

;faxdetect=both
faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no

;Include genzaptelconf configs
#include zapata-auto.conf

;Include AMP configs
#include zapata_additional.conf

Zum Vergrößern anklicken....

Das passiert wenn ich von ISDN den Teilnehmer 600 auf SIP erreichen möchte.


!! Unknown IE 50 (cs5, Unknown Information Element)
-- Going to extension s|1 because of immediate=yes
-- Executing GotoIf("Zap/2-1", "1?from-pstn-reghours|s|1:") in new stack
-- Goto (from-pstn-reghours,s,1)
-- Executing GotoIf("Zap/2-1", "0?from-pstn-reghours-nofax|s|1:2") in new stack
-- Goto (from-pstn-reghours,s,2)
-- Executing Answer("Zap/2-1", "") in new stack
-- Accepting voice call from '133' to 's' on channel 0/2, span 1
-- Executing Wait("Zap/2-1", "1") in new stack
-- Executing SetVar("Zap/2-1", "intype=group-all") in new stack
-- Executing Cut("Zap/2-1", "intype=intype|-|1") in new stack
-- Executing GotoIf("Zap/2-1", "0?7:9") in new stack
-- Goto (from-pstn-reghours,s,9)
-- Executing GotoIf("Zap/2-1", "0?10:12") in new stack
-- Goto (from-pstn-reghours,s,12)
-- Executing GotoIf("Zap/2-1", "0?13:15") in new stack
-- Goto (from-pstn-reghours,s,15)
-- Executing Goto("Zap/2-1", "group-all|s|1") in new stack
-- Goto (group-all,s,1)
-- Hungup 'Zap/2-1'

Zum Vergrößern anklicken....