- Mitglied seit
- 4 Aug 2005
- Beiträge
- 238
- Punkte für Reaktionen
- 1
- Punkte
- 16
Guten Abend, oder Morgen? *gg*
Also ich habe nun von Asterisk 1.0.9 auf Asterisk 1.2 gewechselt. Hatte vorher die Kombination aus BRISTUFF und Asterisk 1.0.9. Nun verwende ich Asterisk 1.2 und mISDN für meine HFC-S Card sowie für die AVM Fritz!PCI.
Meine HFC-S Card funktioniert einwandfrei. Ich kann Anrufe von SIP -> ISDN-Telefon tätigen und von ISDN-Telefon zu SIP.
Wenn ich jetzt allerdings ins Festnetz hinaustelefonieren will, dann heisst es immer, No one is available to answer at this time (1:0/0/0). Die AVM-Karte ist allerings an mein PSTN der Telekom angeschlossen.
Wenn ich von einem Handy aus auf die Festnetzrufnummer rufe heisst es "Dieser Teilnehmer ist zur Zeit nicht erreichbar, bitte versuchen Sie es zu einem späteren Zeitpunkt noch einmal - The person you have called is currently not available at the moment. Please try again later."
Also jegliche Kommunikation welche über die AVM-Karte statt findet ist nicht möglich.
Detailierter Debugging Code:
kennt dieses Problem jemand?
Also ich habe nun von Asterisk 1.0.9 auf Asterisk 1.2 gewechselt. Hatte vorher die Kombination aus BRISTUFF und Asterisk 1.0.9. Nun verwende ich Asterisk 1.2 und mISDN für meine HFC-S Card sowie für die AVM Fritz!PCI.
Meine HFC-S Card funktioniert einwandfrei. Ich kann Anrufe von SIP -> ISDN-Telefon tätigen und von ISDN-Telefon zu SIP.
Wenn ich jetzt allerdings ins Festnetz hinaustelefonieren will, dann heisst es immer, No one is available to answer at this time (1:0/0/0). Die AVM-Karte ist allerings an mein PSTN der Telekom angeschlossen.
Wenn ich von einem Handy aus auf die Festnetzrufnummer rufe heisst es "Dieser Teilnehmer ist zur Zeit nicht erreichbar, bitte versuchen Sie es zu einem späteren Zeitpunkt noch einmal - The person you have called is currently not available at the moment. Please try again later."
Also jegliche Kommunikation welche über die AVM-Karte statt findet ist nicht möglich.
Detailierter Debugging Code:
Code:
Asterisk Ready.
*CLI> misdn show port 1
BEGIN STACK_LIST:
* Stack Addr:40000101 Port 1 Type NT Prot. PMP L2Link DOWN L1Link:DOWN Debug:9
*CLI> misdn show port 2
BEGIN STACK_LIST:
* Stack Addr:40000204 Port 2 Type TE Prot. PMP L2Link DOWN L1Link:UP Debug:9
*CLI> -- Saved useragent "X-Lite release 1103m" for peer 20
-- Executing Macro("SIP/20-caa5", "recording|001650530|20") in new stack
-- Executing SetVar("SIP/20-caa5", "CALLFILENAME=001650530-20-20051203-030605") in new stack
Dec 3 03:06:05 WARNING[10193]: pbx.c:5960 pbx_builtin_setvar_old: SetVar is deprecated, please use Set instead.
-- Executing Monitor("SIP/20-caa5", "wav|001650530-20-20051203-030605|mb") in new stack
-- Executing SetCallerID("SIP/20-caa5", "20") in new stack
-- Executing Dial("SIP/20-caa5", "mISDN/g:extern/650530") in new stack
P[ 0] --> Group Call group: extern
P[ 2] def_l1:1, portup:1
P[ 0] --> * NEW CHANNEL dad:650530 oad:(null)
P[ 2] * Queuing chan 0x81e5d10
P[ 2] read_config: Getting Config
P[ 2] read_config: Deactivating Jitterbuffer
P[ 2] --> * CallGrp: PickupGrp:
P[ 0] * CALL: g:extern/650530
P[ 2] --> * dad:650530 tech:mISDN/2-u0 ctx:pstn-extern
P[ 2] --> * adding2newbc ext 650530
P[ 2] --> * adding2newbc callerid 20
P[ 0] NO OPTS GIVEN
P[ 0] SENDEVENT: stack->nt:0 stack->uperid:40000204
P[ 2] I SEND:SETUP oad:20 dad:650530
P[ 2] --> mode:TE cause:16 ocause:16 rad:
P[ 2] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0
P[ 2] --> channel:0 caps:Speech pi:0 keypad:
P[ 2] --> urate:0 rate:0 mode:0 user1:0
P[ 2] --> pid:0 addr:0 l3id:0
P[ 2] --> b_stid:0 layer_id:0
P[ 2] --> bc:817066c h:0 sh:0
P[ 2] --> found chan: 1
P[ 2] --> new_l3id 30001
P[ 2] --> * SEND: State Dialing pid:0
-- Called g:extern/650530
P[ 0] NO BCHANNEL_BIT !
P[ 2] handle_frm: frm->addr:42000203 frm->prim:3ff82
P[ 2] lib Got Prim: Addr 42000203 prim 3ff82 dinfo 30001
P[ 2] I IND :TIMEOUT oad:20 dad:650530
P[ 2] --> mode:TE cause:16 ocause:16 rad:
P[ 2] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0
P[ 2] --> channel:1 caps:Speech pi:0 keypad:
P[ 2] --> urate:0 rate:0 mode:0 user1:0
P[ 2] --> pid:0 addr:0 l3id:30001
P[ 2] --> b_stid:0 layer_id:0
P[ 2] --> bc:817066c h:0 sh:0
P[ 0] SENDEVENT: stack->nt:0 stack->uperid:40000204
P[ 2] I SEND:RELEASE_COMPLETE oad:20 dad:650530
P[ 2] --> mode:TE cause:16 ocause:16 rad:
P[ 2] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0
P[ 2] --> channel:1 caps:Speech pi:0 keypad:
P[ 2] --> urate:0 rate:0 mode:0 user1:0
P[ 2] --> pid:0 addr:0 l3id:30001
P[ 2] --> b_stid:0 layer_id:0
P[ 2] --> bc:817066c h:0 sh:0
P[ 2] --> empty chan 1
P[ 2] Idx:0 stack->cchan:0 Chan:1
P[ 2] Idx:1 stack->cchan:0 Chan:2
P[ 2] $$$ Already cleaned up bc with stid :0
P[ 2] Freeing Msg on prim:3ff82
P[ 0] NO BCHANNEL_BIT !
P[ 2] handle_frm: frm->addr:42000203 frm->prim:3f182
P[ 2] --> lib: RELEASE_CR Ind with l3id:30001
P[ 2] --> lib: CLEANING UP l3id: 30001
P[ 2] --> empty chan 0
P[ 2] Idx:0 stack->cchan:0 Chan:1
P[ 2] Idx:1 stack->cchan:0 Chan:2
P[ 2] $$$ Already cleaned up bc with stid :0
P[ 2] Idx:0 stack->cchan:0 Chan:1
P[ 2] Idx:1 stack->cchan:0 Chan:2
P[ 0] get_index: EVENT NOT FOUND!!
P[ 2] I IND :CLEAN_UP oad: dad:
P[ 2] --> mode:TE cause:16 ocause:16 rad:
P[ 2] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0
P[ 2] --> channel:0 caps:Speech pi:0 keypad:
P[ 2] --> urate:0 rate:0 mode:0 user1:0
P[ 2] --> pid:0 addr:0 l3id:30001
P[ 2] --> b_stid:0 layer_id:0
P[ 2] --> bc:817066c h:0 sh:0
P[ 2] Trying to Release bc with l3id: 30001
P[ 2] Jitterbuffer already destroyed.
P[ 2] * RELEASING CHANNEL pid:0 ctx:pstn-extern dad:650530 oad:001650530 state: CALLING
P[ 2] --> * State Down
P[ 2] --> Setting AST State to down
P[ 2] * --> In State Callin
P[ 2] * --> Queue Hangup
P[ 0] misdn_hangup called, without chan_list obj.
== No one is available to answer at this time (1:0/0/0)
-- Executing Congestion("SIP/20-caa5", "") in new stack
== Spawn extension (local-sip, 001650530, 4) exited non-zero on 'SIP/20-caa5'
kennt dieses Problem jemand?