hallo,
habe mal versuch 2 hfc karten einzubinden, laut anweisung:
http://dondisperato.blogspot.com/
leider startet asterisk jetzt nicht mehr.
---log----------------------------------------------------------------------
Dec 5 16:16:22 WARNING[1515]: Unable to open '/dev/zap/channel': No such device
Dec 5 16:16:22 ERROR[1515]: Unable to open channel 1: No such device
here = 0, tmp->channel = 1, channel = 1
Dec 5 16:16:22 ERROR[1515]: Unable to register channel '1-2'
Dec 5 16:16:22 WARNING[1515]: chan_zap.so: load_module failed, returning -1
Dec 5 16:16:22 VERBOSE[1515]: == Unregistered channel type 'Tor'
Dec 5 16:16:22 VERBOSE[1515]: == Unregistered channel type 'Zap'
Dec 5 16:16:22 WARNING[1515]: Loading module chan_zap.so failed!
Dec 5 16:16:22 WARNING[1515]: Loading module chan_zap.so failed!
---------------------------------------------------------------------------------
hier mal die meine zapata.conf
;
; Zapata telephony interface
;
; Configuration file
[trunkgroups]
[channels]
language=de
switchtype = euroisdn
; p2mp TE mode (for connecting ISDN lines in point-to-multipoint mode)
; signalling = bri_cpe_ptmp
; p2p TE mode (for connecting ISDN lines in point-to-point mode)
; signalling = bri_cpe
; p2mp NT mode (for connecting ISDN phones in point-to-multipoint mode)
; signalling = bri_net_ptmp
; p2p NT mode (for connecting an ISDN pbx in point-to-point mode)
; signalling = bri_cpe
pridialplan = dynamic
prilocaldialplan = local
nationalprefix = 0
internationalprefix = 00
overlapdial=yes
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=no
rxgain=0.0
txgain=0.0
immediate=no
;-------------------------------
; ptmp NT mode
;-------------------------------
signalling = bri_net_ptmp
context = from-internal
group = 0
channel => 1-2
;-------------------------------------------
; p2mp TE
; Amts-Leitungen Point-to-multi-point
;-------------------------------------------
signalling = bri_cpe_ptmp
context = from-pstn
group = 1
channel => 4-5
und die zaptel.conf
# hfc-s pci a span definition
# most of the values should be bogus because we are not really zaptel
loadzone=nl
defaultzone=nl
span=1,1,3,ccs,ami
bchan=1-2
dchan=3
span=2,1,3,ccs,ami
bchan=4-5
dchan=6
weiß nicht mehr weiter
gruß
achim
habe mal versuch 2 hfc karten einzubinden, laut anweisung:
http://dondisperato.blogspot.com/
leider startet asterisk jetzt nicht mehr.
---log----------------------------------------------------------------------
Dec 5 16:16:22 WARNING[1515]: Unable to open '/dev/zap/channel': No such device
Dec 5 16:16:22 ERROR[1515]: Unable to open channel 1: No such device
here = 0, tmp->channel = 1, channel = 1
Dec 5 16:16:22 ERROR[1515]: Unable to register channel '1-2'
Dec 5 16:16:22 WARNING[1515]: chan_zap.so: load_module failed, returning -1
Dec 5 16:16:22 VERBOSE[1515]: == Unregistered channel type 'Tor'
Dec 5 16:16:22 VERBOSE[1515]: == Unregistered channel type 'Zap'
Dec 5 16:16:22 WARNING[1515]: Loading module chan_zap.so failed!
Dec 5 16:16:22 WARNING[1515]: Loading module chan_zap.so failed!
---------------------------------------------------------------------------------
hier mal die meine zapata.conf
;
; Zapata telephony interface
;
; Configuration file
[trunkgroups]
[channels]
language=de
switchtype = euroisdn
; p2mp TE mode (for connecting ISDN lines in point-to-multipoint mode)
; signalling = bri_cpe_ptmp
; p2p TE mode (for connecting ISDN lines in point-to-point mode)
; signalling = bri_cpe
; p2mp NT mode (for connecting ISDN phones in point-to-multipoint mode)
; signalling = bri_net_ptmp
; p2p NT mode (for connecting an ISDN pbx in point-to-point mode)
; signalling = bri_cpe
pridialplan = dynamic
prilocaldialplan = local
nationalprefix = 0
internationalprefix = 00
overlapdial=yes
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=no
rxgain=0.0
txgain=0.0
immediate=no
;-------------------------------
; ptmp NT mode
;-------------------------------
signalling = bri_net_ptmp
context = from-internal
group = 0
channel => 1-2
;-------------------------------------------
; p2mp TE
; Amts-Leitungen Point-to-multi-point
;-------------------------------------------
signalling = bri_cpe_ptmp
context = from-pstn
group = 1
channel => 4-5
und die zaptel.conf
# hfc-s pci a span definition
# most of the values should be bogus because we are not really zaptel
loadzone=nl
defaultzone=nl
span=1,1,3,ccs,ami
bchan=1-2
dchan=3
span=2,1,3,ccs,ami
bchan=4-5
dchan=6
weiß nicht mehr weiter
gruß
achim