opt_asterisk_3.0.0-RC5 für fli4l 3.0.x

Netview · 25 Mrz 2006

5. Release des neuen asterisk-opts (bristuff-0.3.0-PRE-1n - asterisk 1.2.6).

Bitte testen und Rückmeldung geben!!!

http://www.ip-phone-forum.de/downloads.php?do=file&id=250

Edit: Paket wurde am 11.4.06 20:50 neu erstellt!

ploieel · 26 Mrz 2006

Habe es gerade heruntergeladen und werde jetzt testen. Ich melde mich wieder hier. mit den Ergebnissen.

EDIT:
asterisk startet nicht...

Code:

fli4l 3.0.1 # asterisk -r
-sh: asterisk: not found
fli4l 3.0.1 # asterisk
-sh: asterisk: not found
fli4l 3.0.1 # asterisk -vvvvvgc
-sh: asterisk: not found
fli4l 3.0.1 #

Muss wohl im imonc alles anhaken... mache neuen Versuch.

2. EDIT:
Im imonc alles angehakt und hochgeladen, unverändertes Ergebnis, asterisk wird nicht gefunden...

Netview · 26 Mrz 2006

Gibt es das Verzeichnis '\opt\files\usr\lib\asterisk\modules' auf dem fli4l?
cd \opt\files\usr\lib\asterisk\modules geht od. geht nicht?

bitte mal den output posten von:

ls /opt/files/usr/lib -la
ls /opt/files/lib -la
ls /opt/files/sbin -la
ls /opt/files/usr/sbin -la

cd /etc/rc.d
rc999.asterisk script startet oder nicht?

ploieel · 26 Mrz 2006

nein, geht nur bis lib. Dort gibt es noch die Unterverzeichnisse ISDN, PPPD, SAMBA.

Netview · 26 Mrz 2006

ploieel schrieb:
nein, geht nur bis lib. Dort gibt es noch die Unterverzeichnisse ISDN, PPPD, SAMBA.

Bitte mal

cd /etc/rc.d

rc999.asterisk aufrufen (was passiert?)

ploieel · 26 Mrz 2006

Hi Netview, ich fasse mich kurz:

Code:

fli4l 3.0.1 # asterisk -r
-sh: asterisk: not found
fli4l 3.0.1 # cd /etc/rc.d
fli4l 3.0.1 # rc999.asterisk
./rc999.asterisk: 99: Syntax error: Bad substitution
fli4l 3.0.1 #

EDIT:
Nachlieferung zum #4:

Code:

fli4l 3.0.1 # ls opt/files/usr/lib -la
ls: opt/files/usr/lib: No such file or directory
fli4l 3.0.1 # ls opt/files/lib -la
ls: opt/files/lib: No such file or directory
fli4l 3.0.1 # ls opt/files/sbin -la
ls: opt/files/sbin: No such file or directory
fli4l 3.0.1 # ls opt/files/usr/sbin -la
ls: opt/files/usr/sbin: No such file or directory
fli4l 3.0.1 #

ABER im WINDOWS-Fli-Ordner gibt es diese Verzeichnisse!

fow0ryl · 26 Mrz 2006

Hi,

sprechen wir wirklich vom gleichen Paket?
Ich habe das Paket heute Mittag heruntergeladen.
Meinen-Test-fli4l mit allen Paketen, die ich auch auf der 'produktiven' Maschine verwende neu aufgesetzt.

1. Problem
/check/asterisk.ext
Zeile -> depends on fli4l version 3.0.0
musste geändert werden in: depends on fli4l version 3.0.[0-1]

2. Problem
Asterisk startet nicht mit dem bekannten Problem 'libpthread'
Der Link in /opt/files/lib zeigt ins Leere.

fli4l 3.0.1 # ls -Al libp*
lrwxrwxrwx 1 root root 30 Mar 26 19:09 libpthread.so.0 -> /opt/files/lib/libpthread.so.0
fli4l 3.0.1 # cd /opt/files/lib/
fli4l 3.0.1 # ls -Al libp*
lrwxrwxrwx 1 root root 30 Mar 26 19:09 libpthread.so.0 -> /opt/files/lib/libpthread.so.0

Wo er recht hat, hat er recht

Baue jetzt erst mal eine HFC Karte ein.

fli4l 3.0.1 # cat /var/log/syslog | grep zap
Mar 26 19:09:52 fli4l kernel: zaphfc: jitterbuffer size: 1
Mar 26 19:09:52 fli4l kernel: zaphfc: 0 hfc-pci card(s) in this box.

Im Anschluss gibt's noch ein paar ls Ausgaben ....

Gruß Henning

fli4l 3.0.1 # ls /opt/files/usr/lib -la
drwxrwxrwt 5 400 401 380 Mar 26 19:09 .
drwxrwxrwt 6 400 401 120 Mar 24 23:35 ..
drwxrwxrwt 3 400 401 60 Mar 26 19:09 asterisk
drwxr-xr-x 2 root root 60 Mar 26 19:08 isdn
lrwxrwxrwx 1 root root 18 Mar 26 19:08 libcapi20.so -> libcapi20.so.3.0.4
lrwxrwxrwx 1 root root 39 Mar 26 19:09 libcapi20.so.3 -> /opt/files/usr/lib/libcapi20.so.3.0.4as
-rw-r--r-- 1 root root 31620 Mar 26 18:46 libcapi20.so.3.0.4
-rw-r--r-- 1 root root 86269 Mar 26 18:46 libcapi20.so.3.0.4as
-rw-r--r-- 1 root root 957699 Mar 26 18:46 libcrypto.so.0.9.6
lrwxrwxrwx 1 root root 32 Mar 26 19:09 libgcc_s.so -> /opt/files/usr/lib/libgcc_s.so.1
-rwxr-xr-x 1 root root 788096 Mar 26 18:46 libgcc_s.so.1
lrwxrwxrwx 1 root root 32 Mar 26 19:09 libpri.so.1 -> /opt/files/usr/lib/libpri.so.1.0
-rwxr-xr-x 1 root root 327083 Mar 26 18:46 libpri.so.1.0
-rwxr-xr-x 1 root root 185869 Mar 26 18:46 libspeex.so.1
-rw-r--r-- 1 root root 206173 Mar 26 18:46 libssl.so.0.9.6
lrwxrwxrwx 1 root root 37 Mar 26 19:09 libtonezone.so.1 -> /opt/files/usr/lib/libtonezone.so.1.0
-rwxr-xr-x 1 root root 115419 Mar 26 18:46 libtonezone.so.1.0
-rw-r--r-- 1 root root 5446 Mar 26 18:46 openvpn-down-root.so
drwxr-xr-x 3 root root 60 Mar 26 19:08 pppd
fli4l 3.0.1 # ls /opt/files/lib -la
drwxr-xr-x 4 root root 800 Mar 26 19:09 .
drwxrwxrwt 17 root root 360 Mar 26 19:09 ..
drwxr-xr-x 2 root root 440 Mar 26 19:08 iptables
-rwxr-xr-x 1 root root 99756 Mar 26 18:45 ld-2.2.5.so
lrwxrwxrwx 1 root root 26 Mar 26 19:09 ld-linux.so.2 -> /opt/files/lib/ld-2.2.5.so
-rwxr-xr-x 1 root root 17209 Mar 26 18:45 ld-uClibc-0.9.28.so
lrwxrwxrwx 1 root root 19 Mar 26 19:07 ld-uClibc.so.0 -> ld-uClibc-0.9.28.so
lrwxrwxrwx 1 root root 19 Mar 26 19:07 libc.so -> libuClibc-0.9.28.so
lrwxrwxrwx 1 root root 19 Mar 26 19:07 libc.so.0 -> libuClibc-0.9.28.so
-rwxr-xr-x 1 root root 1394238 Mar 26 18:45 libc.so.6
-rwxr-xr-x 1 root root 9005 Mar 26 18:45 libcrypt-0.9.28.so
lrwxrwxrwx 1 root root 18 Mar 26 19:07 libcrypt.so -> libcrypt-0.9.28.so
lrwxrwxrwx 1 root root 18 Mar 26 19:07 libcrypt.so.0 -> libcrypt-0.9.28.so
-rwxr-xr-x 1 root root 9209 Mar 26 18:45 libdl-0.9.28.so
lrwxrwxrwx 1 root root 15 Mar 26 19:07 libdl.so -> libdl-0.9.28.so
lrwxrwxrwx 1 root root 15 Mar 26 19:07 libdl.so.0 -> libdl-0.9.28.so
-rwxr-xr-x 1 root root 14605 Mar 26 18:45 libdl.so.2
-rwxr-xr-x 1 root root 28108 Mar 26 18:45 libgcc_s.so.1
-rwxr-xr-x 1 root root 54193 Mar 26 18:45 libm-0.9.28.so
lrwxrwxrwx 1 root root 14 Mar 26 19:07 libm.so -> libm-0.9.28.so
lrwxrwxrwx 1 root root 14 Mar 26 19:07 libm.so.0 -> libm-0.9.28.so
-rwxr-xr-x 1 root root 188574 Mar 26 18:45 libm.so.6
lrwxrwxrwx 1 root root 17 Mar 26 19:07 libncurses.so.5 -> libncurses.so.5.2
-rwxr-xr-x 1 root root 333142 Mar 26 18:45 libncurses.so.5.2
-rwxr-xr-x 1 root root 4665 Mar 26 18:45 libnsl-0.9.28.so
lrwxrwxrwx 1 root root 16 Mar 26 19:07 libnsl.so -> libnsl-0.9.28.so
lrwxrwxrwx 1 root root 16 Mar 26 19:07 libnsl.so.0 -> libnsl-0.9.28.so
-rwxr-xr-x 1 root root 16184 Mar 26 18:45 libnss_dns.so.2
lrwxrwxrwx 1 root root 30 Mar 26 19:09 libpthread.so.0 -> /opt/files/lib/libpthread.so.0
-rwxr-xr-x 1 root root 4665 Mar 26 18:45 libresolv-0.9.28.so
lrwxrwxrwx 1 root root 19 Mar 26 19:07 libresolv.so -> libresolv-0.9.28.so
lrwxrwxrwx 1 root root 19 Mar 26 19:07 libresolv.so.0 -> libresolv-0.9.28.so
-rwxr-xr-x 1 root root 66112 Mar 26 18:45 libresolv.so.2
lrwxrwxrwx 1 root root 16 Mar 26 19:07 librpc.so -> librpc-0.9.28.so
lrwxrwxrwx 1 root root 16 Mar 26 19:07 librpc.so.0 -> librpc-0.9.28.so
-rwxr-xr-x 1 root root 202801 Mar 26 18:45 libuClibc-0.9.28.so
-rwxr-xr-x 1 root root 4849 Mar 26 18:45 libutil-0.9.28.so
lrwxrwxrwx 1 root root 17 Mar 26 19:07 libutil.so -> libutil-0.9.28.so
lrwxrwxrwx 1 root root 17 Mar 26 19:07 libutil.so.0 -> libutil-0.9.28.so
drwxr-xr-x 3 root root 60 Mar 26 18:45 modules
fli4l 3.0.1 # ls /opt/files/sbin -la
drwxr-xr-x 2 root root 540 Mar 26 19:08 .
drwxrwxrwt 17 root root 360 Mar 26 19:09 ..
-r-xr-xr-x 1 root root 16258 Mar 26 18:46 avmcapictrl
-r-xr-xr-x 1 root root 187989 Mar 26 18:46 e2fsck
-rwxr-xr-x 65 root root 154377 Mar 26 18:46 halt
-r-xr-xr-x 1 root root 39616 Mar 26 18:46 hdparm
-rwxr-xr-x 65 root root 154377 Mar 26 18:46 ifconfig
-r-xr-xr-x 1 root root 5540 Mar 26 18:46 imontty
-rwxr-xr-x 65 root root 154377 Mar 26 18:46 init
-rwxr-xr-x 65 root root 154377 Mar 26 18:46 insmod
-r-xr-xr-x 1 root root 35348 Mar 26 18:46 iptables
-r-xr-xr-x 1 root root 29344 Mar 26 18:46 isdnctrl
-rwxr-xr-x 1 root root 166 Mar 26 19:07 linuxrc
-rwxr-xr-x 65 root root 154377 Mar 26 18:46 loadkmap
-r-xr-xr-x 1 root root 34 Mar 26 18:46 lsmod
-rwxr-xr-x 65 root root 154377 Mar 26 18:46 makedevs
-r-xr-xr-x 4 root root 8593 Mar 26 18:45 mkswap
-rwxr-xr-x 1 root root 157772 Mar 26 18:46 mpg123
-rwxr-xr-x 65 root root 154377 Mar 26 18:46 poweroff
-rwxr-xr-x 65 root root 154377 Mar 26 18:46 reboot
-rwxr-xr-x 1 root root 455308 Mar 26 18:46 register
-rwxr-xr-x 65 root root 154377 Mar 26 18:46 rmmod
-rwxr-xr-x 65 root root 154377 Mar 26 18:46 route
-r-xr-xr-x 4 root root 8593 Mar 26 18:45 swapoff
-r-xr-xr-x 4 root root 8593 Mar 26 18:45 swapon
-rw-r--r-- 1 root root 580 Sep 9 2005 x
-rwxr-xr-x 1 root root 235026 Mar 26 18:46 ztcfg
fli4l 3.0.1 # ls /opt/files/usr/sbin -la
drwxr-xr-x 2 root root 460 Mar 26 19:09 .
drwxrwxrwt 6 400 401 120 Mar 24 23:35 ..
-r-xr-xr-x 1 root root 19072 Mar 26 18:46 arp
-rwxr-xr-x 1 root root 6093536 Mar 26 18:46 asterisk
-r-xr-xr-x 1 root root 79465 Mar 26 18:46 chronyd
-rwxr-xr-x 65 root root 154377 Mar 26 18:46 chroot
-r-xr-xr-x 1 root root 21284 Mar 26 18:46 cron
-rwx------ 1 dns dns 67856 Mar 26 18:46 dnsmasq
lrwxrwxrwx 1 root root 34 Mar 26 19:08 dropbear -> /usr/sbin/dropbearmulti_server_scp
-r-xr-xr-x 1 root root 128293 Mar 26 18:46 dropbearmulti_server_scp
-r-xr-xr-x 1 root root 18124 Mar 26 18:46 klogd
-rwxr-xr-x 1 root root 62412 Mar 26 18:46 mgetty
-r-xr-xr-x 1 root root 31150 Mar 26 18:46 mini_httpd
lrwxrwxrwx 1 root root 22 Mar 26 19:09 mpg123 -> /opt/files/sbin/mpg123
lrwxrwxrwx 1 root root 11 Mar 26 19:08 openvpn -> openvpn.std
-r-xr-xr-x 1 root root 314564 Mar 26 18:46 openvpn.std
-r-xr-xr-x 1 root root 164200 Mar 26 18:46 pppd
lrwxrwxrwx 1 root root 24 Mar 26 19:09 register -> /opt/files/sbin/register
-r-xr-xr-x 1 root root 101884 Mar 26 18:46 sftp-server
-r-xr-xr-x 1 root root 4432 Mar 26 18:46 srv868
-r-xr-xr-x 1 root root 23148 Mar 26 18:46 syslogd
-r-xr-xr-x 1 root root 12846 Mar 26 18:46 traceroute
lrwxrwxrwx 1 root root 22 Mar 26 19:09 ztgcfg -> /opt/files/sbin/ztgcfg

ploieel · 26 Mrz 2006

Kleiner Fortschritt, aber Asterisk startet immer noch nicht:

Code:

fli4l 3.0.1 # asterisk -r
-sh: asterisk: not found
fli4l 3.0.1 # ls opt/files/usr/lib -la
dr-xr-xr-x    3 root     root         1024 Mar 26 19:12 .
dr-xr-xr-x    6 root     root         1024 Mar 26 19:12 ..
-rw-r--r--    1 root     root        86269 Mar 24 11:19 libcapi20.so.3.0.4as
-rw-r--r--    1 root     root       957699 Apr 29  2005 libcrypto.so.0.9.6
-rwxr-xr-x    1 root     root       788096 Apr 29  2005 libgcc_s.so.1
-rwxr-xr-x    1 root     root       327083 Mar 24 15:38 libpri.so.1.0
-rw-r--r--    1 root     root       185869 Jan  5 18:35 libspeex.so.1
-rw-r--r--    1 root     root       206173 Apr 29  2005 libssl.so.0.9.6
-rwxr-xr-x    1 root     root       115419 May 15  2005 libtonezone.so.1.0
dr-xr-xr-x    3 root     root         1024 Mar 26 19:12 pppd
fli4l 3.0.1 # ls /opt/files/lib -la
dr-xr-xr-x    4 root     root         1024 Mar 26 19:12 .
dr-xr-xr-x    8 root     root         1024 Mar 26 19:12 ..
dr-xr-xr-x    2 root     root         1024 Mar 26 19:12 iptables
-rwxr-xr-x    1 root     root        99756 Apr 29  2005 ld-2.2.5.so
-rw-r--r--    1 root     root      1394238 Apr 29  2005 libc.so.6
-rw-r--r--    1 root     root        14605 Apr 29  2005 libdl.so.2
-rw-r--r--    1 root     root        54193 Feb 23 22:28 libm-0.9.28.so
-rw-r--r--    1 root     root       188574 Apr 29  2005 libm.so.6
-rwxr-xr-x    1 root     root       333142 Apr 29  2005 libncurses.so.5.2
-rw-r--r--    1 root     root        16184 Nov 23  2004 libnss_dns.so.2
-rw-r--r--    1 root     root       106670 Apr 29  2005 libpthread.so.0
-rw-r--r--    1 root     root         4665 Feb 23 22:28 libresolv-0.9.28.so
-rw-r--r--    1 root     root        66112 Apr 29  2005 libresolv.so.2
-rw-r--r--    1 root     root        70754 Feb 23 22:28 librpc-0.9.28.so
-rw-r--r--    1 root     root         4849 Feb 23 22:28 libutil-0.9.28.so
dr-xr-xr-x    3 root     root         1024 Mar 26 19:12 modules
fli4l 3.0.1 #

fli4l 3.0.1 # ls opt/files/sbin -la
dr-xr-xr-x    2 root     root         1024 Mar 26 19:12 .
dr-xr-xr-x    8 root     root         1024 Mar 26 19:12 ..
-r-xr-xr-x    1 root     root        61361 Feb 23 22:29 fdisk
-r-xr-xr-x    1 root     root        39616 Feb 23 22:29 hdparm
-r-xr-xr-x    1 root     root         5540 Feb 23 22:29 imontty
-r-xr-xr-x    1 root     root        35348 Feb 23 22:28 iptables
-r-xr-xr-x    1 root     root        29344 Feb 23 22:29 isdnctrl
-r-xr-xr-x    1 root     root           34 Mar 26 19:08 lsmod
-r-xr-xr-x    1 root     root        18628 Feb 23 22:29 mkdosfs
-r-xr-xr-x    1 root     root        76264 Feb 23 22:29 mke2fs
-rwxr-xr-x    1 root     root       157772 Jan 27 08:12 mpg123
-rwxr-xr-x    1 root     root       455308 Apr 30  2005 register
-rwxr-xr-x    1 root     root       235026 Mar 18 15:01 ztcfg
fli4l 3.0.1 # ls opt/files/usr/sbin -la
dr-xr-xr-x    2 root     root         1024 Mar 26 19:12 .
dr-xr-xr-x    6 root     root         1024 Mar 26 19:12 ..
-r-xr-xr-x    1 root     root        19072 Feb 23 22:30 arp
-rwxr-xr-x    1 root     root      6093536 Mar 18 11:52 asterisk
-rw-r--r--    1 root     root         1024 Feb 23 22:29 bootsect.bin
-r-xr-xr-x    1 root     root        79465 Feb 23 22:29 chronyd
-r-xr-xr-x    1 root     root        21284 Feb 23 22:29 cron
-r-xr-xr-x    1 root     root        74321 Feb 23 22:29 dhcpd
-rwx------    1 dns      dns         67856 Feb 23 22:28 dnsmasq
-r-xr-xr-x    1 root     root       140617 Feb 23 22:30 dropbearmulti_server_scp_client
-r-xr-xr-x    1 root     root         6014 Mar 26 19:08 hdinstall.sh
-r-xr-xr-x    1 root     root        18124 Feb 23 22:28 klogd
-r-xr-xr-x    1 root     root        31150 Feb 23 22:29 mini_httpd
-r-xr-xr-x    1 root     root       548692 Jan 24 20:35 nmbd
-r-xr-xr-x    1 root     root       164200 Feb 23 22:29 pppd
-r-xr-xr-x    1 root     root        23712 Feb 23 22:29 pppoe
-r-xr-xr-x    1 root     root       101884 Feb 23 22:30 sftp-server
-r-xr-xr-x    1 root     root      1507932 Jan 24 20:35 smbd
-r-xr-xr-x    1 root     root        18905 Feb 23 22:29 syslinux
-r-xr-xr-x    1 root     root        23148 Feb 23 22:28 syslogd
fli4l 3.0.1 # cd /etc/rc.d
fli4l 3.0.1 # rc999.asterisk
./rc999.asterisk: 99: Syntax error: Bad substitution
fli4l 3.0.1 #

Ich hatte gedacht, das mit der chk-Meldung wäre nicht erwähnenswert, hatte ich gleich zu Anfang eingepflegt...

Netview · 26 Mrz 2006

Hallo Günter,

ich denke wir haben es gleich!

kannst du per ssh-Session

die Programme:
ztcfg
mpg123
register aufrufen (also einfach an einer beliebigen Stelle z.B. register eingeben!)

ploieel · 26 Mrz 2006

Hallo Holger;

Du siehst schon Licht am Ende des Tunnels, ich bisher noch nicht...

Code:

fli4l 3.0.1 # ztcfg
-sh: ztcfg: not found
fli4l 3.0.1 # mpg123
-sh: mpg123: not found
fli4l 3.0.1 # register
-sh: register: not found
fli4l 3.0.1 #

fow0ryl · 26 Mrz 2006

Hm, habe hier noch ein paar Merkwürdigkeiten:

1.) Warum laufen eigentlich während des Startvorganges 2 Prozesse zum Entpacken? Hab mich dazu einfach mal per ssh mit dem fli4l verbunden, während er noch versucht hat die FritzCard-DSL zu initialisieren. (Dauert etwas länger, weil die Karte in der Testmaschine gar nicht am DSL/ISDN hängt)

Code:

4944 root        252 S   /usr/sbin/cron
5331 root        216 S   /bin/tar -xjf /opt/files/asterisk-files.tar.bz2
5332 root       3752 R   /bin/tar -xjf /opt/files/asterisk-files.tar.bz2

2.)

Code:

fli4l 3.0.1 # ls -All libp* lrwxrwxrwx 1 root root 30 Mar 26 20:03 libpthread.so.0 -> /opt/files/lib/libpthread.so.0 fli4l 3.0.1 # ls -All /opt/files/lib/libp* lrwxrwxrwx 1 root root 30 Mar 26 20:03 /opt/files/lib/libpthread.so.0 -> /opt/files/lib/libpthread.so.0

Wenn ich in opt die libpthread lösche ergibt folgendes:

Code:

fli4l 3.0.1 # rm /opt/files/lib/libpthread.so.0
fli4l 3.0.1 # ls -All /opt/files/lib/libp*
ls: /opt/files/lib/libp*: No such file or directory
fli4l 3.0.1 # ls -All libp*
ls: libp*: No such file or directory

Ein kopieren der libpthread per scp nach /opt/files/lib ergibt folgendes.

Code:

fli4l 3.0.1 # ls -All libp*
-rw-r--r--    1 root     root       106670 Mar 26 20:06 libpthread.so.0
fli4l 3.0.1 # ls -All /opt/files/lib/libp*
-rw-r--r--    1 root     root       106670 Mar 26 20:06 /opt/files/lib/libpthread.so.0

Wieso taucht die lib denn dann unter /lib auf ???? Hab gerade noch etwas entdeckt: In der rc999.asterisk wird ein remount auf hda2 gemacht. Das funktioniert so natürlich nur, wenn /opt auch auf hda2 liegt !!!

Code:

#----------------------------------------------------------------------------
# /etc/rc.d/rc999.asterisk - start script (C) 2004 Jürgen Röllgen
#
# Creation:     30.10.2004 jrg
# Improvements: 11.11.2004 ajh
# Last Update:  $Id: rc999.asterisk,v 1.2 2004/11/29 19:45:00 jrg Exp $
#----------------------------------------------------------------------------

# Das rc script legt die log-Directories an und erstellt die Device-Files.
# Danach werden die Module für die HFC-ISDN Karte geladen und konfiguriert.
# Jetzt wird Asterisk im Daemon-Modus gestartet.

if [ "$OPT_ASTERISK" = yes ]
then
	begin_script ASTERISK "Starting Asterisk ..."

mount -o remount,rw /dev/hda1 /boot
mount -o remount,rw /dev/hda2 /opt

Ach ja. HFC Karte wird jetzt erkannt.

Code:

fli4l 3.0.1 # cat /var/log/syslog |grep zap
Mar 26 20:25:25 fli4l kernel: zaphfc: jitterbuffer size: 1
Mar 26 20:25:25 fli4l kernel: zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xcd390000 fifo 0xc9c58000(0x9c58000) IRQ 5 HZ 100
Mar 26 20:25:25 fli4l kernel: zaphfc: Card 0 configured for NT mode
Mar 26 20:25:25 fli4l kernel: zaphfc: Card 0 configured for master mode
Mar 26 20:25:25 fli4l kernel: zaphfc: hfc busy.
Mar 26 20:25:25 fli4l kernel: zaphfc: 1 hfc-pci card(s) in this box.

Ähm, warum geht eigentlich die Formatierung des Codes kaputt, wenn man einen Beitrag ändert??
Gruß Henning

Netview · 26 Mrz 2006

ploieel schrieb:
Hallo Holger;

Du siehst schon Licht am Ende des Tunnels, ich bisher noch nicht...

Code:

fli4l 3.0.1 # ztcfg -sh: ztcfg: not found fli4l 3.0.1 # mpg123 -sh: mpg123: not found fli4l 3.0.1 # register -sh: register: not found fli4l 3.0.1 #

Und wenn du in das Verzeichnis wechselst:

cd /opt/files/sbin

und dann
ztcfg, register, mpg123 ?

ploieel · 26 Mrz 2006

Code:

fli4l 3.0.1 #
fli4l 3.0.1 # cd /opt/files/sbin
fli4l 3.0.1 # ztcfg
-sh: ztcfg: not found
fli4l 3.0.1 # mpg123
-sh: mpg123: not found
fli4l 3.0.1 # register
-sh: register: not found
fli4l 3.0.1 #

Netview · 26 Mrz 2006

ploieel schrieb:

Code:

fli4l 3.0.1 #
fli4l 3.0.1 # cd /opt/files/sbin
fli4l 3.0.1 # ztcfg
-sh: ztcfg: not found
fli4l 3.0.1 # mpg123
-sh: mpg123: not found
fli4l 3.0.1 # register
-sh: register: not found
fli4l 3.0.1 #

Das hängt vermutlich an der libc6.

mach doch mal folgendes:
cd /lib
ls -la und den output hier posten - merci!

ploieel · 26 Mrz 2006

Code:

fli4l 3.0.1 # cd lib
fli4l 3.0.1 # ls -la
dr-xr-xr-x    4 root     root          780 Mar 26 19:13 .
dr-xr-xr-x   20 root     root          480 Mar 26 19:13 ..
drwxr-xr-x    2 root     root          400 Mar 26 19:13 iptables
lrwxrwxrwx    1 root     root           26 Mar 26 19:13 ld-2.2.5.so -> /opt/files/lib/ld-2.2.5.so
-rwxr-xr-x    1 root     root        17209 Feb 23 22:28 ld-uClibc-0.9.28.so
lrwxrwxrwx    1 root     root           19 Mar 26 19:11 ld-uClibc.so.0 -> ld-uClibc-0.9.28.so
lrwxrwxrwx    1 root     root           19 Mar 26 19:11 libc.so -> libuClibc-0.9.28.so
lrwxrwxrwx    1 root     root           19 Mar 26 19:11 libc.so.0 -> libuClibc-0.9.28.so
lrwxrwxrwx    1 root     root           24 Mar 26 19:13 libc.so.6 -> /opt/files/lib/libc.so.6
-rw-r--r--    1 root     root         9005 Feb 23 22:28 libcrypt-0.9.28.so
lrwxrwxrwx    1 root     root           18 Mar 26 19:11 libcrypt.so -> libcrypt-0.9.28.so
lrwxrwxrwx    1 root     root           18 Mar 26 19:11 libcrypt.so.0 -> libcrypt-0.9.28.so
-rw-r--r--    1 root     root         9209 Feb 23 22:28 libdl-0.9.28.so
lrwxrwxrwx    1 root     root           15 Mar 26 19:11 libdl.so -> libdl-0.9.28.so
lrwxrwxrwx    1 root     root           15 Mar 26 19:11 libdl.so.0 -> libdl-0.9.28.so
lrwxrwxrwx    1 root     root           25 Mar 26 19:13 libdl.so.2 -> /opt/files/lib/libdl.so.2
lrwxrwxrwx    1 root     root           29 Mar 26 19:13 libm-0.9.28.so -> /opt/files/lib/libm-0.9.28.so
lrwxrwxrwx    1 root     root           14 Mar 26 19:11 libm.so -> libm-0.9.28.so
lrwxrwxrwx    1 root     root           14 Mar 26 19:11 libm.so.0 -> libm-0.9.28.so
lrwxrwxrwx    1 root     root           24 Mar 26 19:13 libm.so.6 -> /opt/files/lib/libm.so.6
lrwxrwxrwx    1 root     root           17 Mar 26 19:11 libncurses.so.5 -> libncurses.so.5.2
lrwxrwxrwx    1 root     root           32 Mar 26 19:13 libncurses.so.5.2 -> /opt/files/lib/libncurses.so.5.2
-rw-r--r--    1 root     root         4665 Feb 23 22:28 libnsl-0.9.28.so
lrwxrwxrwx    1 root     root           16 Mar 26 19:11 libnsl.so -> libnsl-0.9.28.so
lrwxrwxrwx    1 root     root           16 Mar 26 19:11 libnsl.so.0 -> libnsl-0.9.28.so
lrwxrwxrwx    1 root     root           30 Mar 26 19:13 libnss_dns.so.2 -> /opt/files/lib/libnss_dns.so.2
lrwxrwxrwx    1 root     root           20 Mar 26 19:11 libpthread.so.0 -> libpthread-0.9.28.so
lrwxrwxrwx    1 root     root           34 Mar 26 19:13 libresolv-0.9.28.so -> /opt/files/lib/libresolv-0.9.28.so
lrwxrwxrwx    1 root     root           19 Mar 26 19:11 libresolv.so -> libresolv-0.9.28.so
lrwxrwxrwx    1 root     root           19 Mar 26 19:11 libresolv.so.0 -> libresolv-0.9.28.so
lrwxrwxrwx    1 root     root           29 Mar 26 19:13 libresolv.so.2 -> /opt/files/lib/libresolv.so.2
lrwxrwxrwx    1 root     root           31 Mar 26 19:13 librpc-0.9.28.so -> /opt/files/lib/librpc-0.9.28.so
lrwxrwxrwx    1 root     root           16 Mar 26 19:11 librpc.so -> librpc-0.9.28.so
lrwxrwxrwx    1 root     root           16 Mar 26 19:11 librpc.so.0 -> librpc-0.9.28.so
-rw-r--r--    1 root     root       202801 Feb 23 22:28 libuClibc-0.9.28.so
lrwxrwxrwx    1 root     root           32 Mar 26 19:13 libutil-0.9.28.so -> /opt/files/lib/libutil-0.9.28.so
lrwxrwxrwx    1 root     root           17 Mar 26 19:11 libutil.so -> libutil-0.9.28.so
lrwxrwxrwx    1 root     root           17 Mar 26 19:11 libutil.so.0 -> libutil-0.9.28.so
dr-xr-xr-x    3 root     root           60 Mar 26 19:11 modules
fli4l 3.0.1 #

Holger,
ich habe eben mal mit winscp3 auf den Router geguckt, weil mir die Sache komisch vorkam.

Hier unterscheidet sich die Verzeichnisstruktur doch in einigen Punkten von der, die im Windows-Fli-Ordner liegt. Aber vielleicht muss das ja so sein.

Edit:

zur Kontrolle:

Code:

fli4l 3.0.1 # cd ..
fli4l 3.0.1 # cd /opt/files/sbin
fli4l 3.0.1 # hdparm

hdparm - get/set hard disk parameters - version v6.3

Usage:  hdparm  [options] [device] ..

Options:
 -a   get/set fs readahead
 -A   set drive read-lookahead flag (0/1)
 -b   get/set bus state (0 == off, 1 == on, 2 == tristate)
 -B   set Advanced Power Management setting (1-255)
 -c   get/set IDE 32-bit IO setting
 -C   check IDE power mode status
 -d   get/set using_dma flag
 --direct  use O_DIRECT to bypass page cache for timings
 -D   enable/disable drive defect management
 -E   set cd-rom drive speed
 -f   flush buffer cache for device on exit
 -g   display drive geometry
 -h   display terse usage information
 -i   display drive identification
 -I   detailed/current information directly from drive
 --Istdin  read identify data from stdin as ASCII hex
 --Istdout write identify data to stdout as ASCII hex
 -k   get/set keep_settings_over_reset flag (0/1)
 -K   set drive keep_features_over_reset flag (0/1)
 -L   set drive doorlock (0/1) (removable harddisks only)
 -M   get/set acoustic management (0-254, 128: quiet, 254: fast) (EXPERIMENTAL)
 -m   get/set multiple sector count
 -n   get/set ignore-write-errors flag (0/1)
 -p   set PIO mode on IDE interface chipset (0,1,2,3,4,...)
 -P   set drive prefetch count
 -q   change next setting quietly
 -Q   get/set DMA tagged-queuing depth (if supported)
 -r   get/set device  readonly flag (DANGEROUS to set)
 -R   register an IDE interface (DANGEROUS)
 -S   set standby (spindown) timeout
 -t   perform device read timings
 -T   perform cache read timings
 -u   get/set unmaskirq flag (0/1)
 -U   un-register an IDE interface (DANGEROUS)
 -v   defaults; same as -mcudkrag for IDE drives
 -V   display program version and exit immediately
 -w   perform device reset (DANGEROUS)
 -W   set drive write-caching flag (0/1) (DANGEROUS)
 -x   tristate device for hotswap (0/1) (DANGEROUS)
 -X   set IDE xfer mode (DANGEROUS)
 -y   put IDE drive in standby mode
 -Y   put IDE drive to sleep
 -Z   disable Seagate auto-powersaving mode
 -z   re-read partition table
 --security-help  display help for ATA security commands

fli4l 3.0.1 # register
-sh: register: not found
fli4l 3.0.1 # mpg123
-sh: mpg123: not found
fli4l 3.0.1 #

Netview · 26 Mrz 2006

Hallo Günter,

lade dir mal RC2:

http://www.ip-phone-forum.de/downloads.php?do=file&id=244

fow0ryl · 26 Mrz 2006

Hi,

habe jetzt mal das booten mitprotokolliert.
Danach gibt es noch ein paar weitere Fehler.

Code:

Starting Asterisk ... (/etc/rc.d/rc999.asterisk)
+ mount -o remount,rw /dev/hda1 /boot
+ mount -o remount,rw /dev/hda2 /opt
mount: Mounting /dev/hda2 on /opt failed: Invalid argument
+ cd /
+ /bin/tar -xjf /opt/files/asterisk-files.tar.bz2
plci_change_state:0x0 0 -> 1 event=1
capiplugin: leased line (adslpppoe)
plci_change_state:0x102 1 -> 2 event=3
plci_change_state:0x102 2 -> 3 event=6
ncci_change_state:0x102 0 -> 1 event=1
ncci_change_state:0x10102 1 -> 3 event=3
ncci_change_state:0x10102 3 -> 7 event=10
ncci_change_state:0x10102 7 -> 0 event=13
plci_change_state:0x102 3 -> 7 event=8
plci_change_state:0x102 7 -> 8 event=9
plci_change_state:0x102 8 -> 0 event=11
capiplugin: disconnect(remote): "" -> "" outgoing (pcli=0x102/ncci=0x10102) 0x0000 (0x0000) - No additional information
capiplugin: couldn't make connection
controller 2: listen_change_state 0 -> 1
controller 1: listen_change_state 0 -> 1
controller 1: listen_change_state state=1 event=1 ????
controller 1: listen_change_state state=1 event=1 ????
contr 2: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0
controller 2: listen_change_state 1 -> 0
capiplugin: exit
Plugin capiplugin.so loaded.
capiplugin: $Revision: 1.36 $
capiconn:  1.13
Using interface ppp0
local  IP address 10.112.112.112
remote IP address 10.112.112.113
capiplugin: phase dormant.
loading adsl parameters from /etc/drdsl/adsl.conf ...
capiplugin: contr=2
capiplugin: contr=1
capiplugin: contr=1
capiplugin: contr=1
controller 2: listen_change_state 0 -> 1
controller 1: listen_change_state 0 -> 1
controller 1: listen_change_state state=1 event=1 ????
controller 1: listen_change_state state=1 event=1 ????
contr 2: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0
controller 2: listen_change_state 1 -> 0
contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0
controller 1: listen_change_state 1 -> 0
contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0
controller 1: listen_change_state state=0 event=3 ????
contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0
controller 1: listen_change_state state=0 event=3 ????
Starting link
capiplugin: phase serialconn (was dormant).
plci_change_state:0x0 0 -> 1 event=1
capiplugin: leased line (adslpppoe)
plci_change_state:0x102 1 -> 2 event=3
plci_change_state:0x102 2 -> 3 event=6
ncci_change_state:0x102 0 -> 1 event=1
ncci_change_state:0x10102 1 -> 3 event=3
ncci_change_state:0x10102 3 -> 7 event=10
ncci_change_state:0x10102 7 -> 0 event=13
plci_change_state:0x102 3 -> 7 event=8
plci_change_state:0x102 7 -> 8 event=9
plci_change_state:0x102 8 -> 0 event=11
capiplugin: disconnect(remote): "" -> "" outgoing (pcli=0x102/ncci=0x10102) 0x0000 (0x0000) - No additional information
plci_change_state:0x0 0 -> 1 event=1
capiplugin: leased line (adslpppoe)
plci_change_state:0x102 1 -> 2 event=3
plci_change_state:0x102 2 -> 3 event=6
ncci_change_state:0x102 0 -> 1 event=1
ncci_change_state:0x10102 1 -> 3 event=3
ncci_change_state:0x10102 3 -> 7 event=10
ncci_change_state:0x10102 7 -> 0 event=13
plci_change_state:0x102 3 -> 7 event=8
plci_change_state:0x102 7 -> 8 event=9
plci_change_state:0x102 8 -> 0 event=11
capiplugin: disconnect(remote): "" -> "" outgoing (pcli=0x102/ncci=0x10102) 0x0000 (0x0000) - No additional information
plci_change_state:0x0 0 -> 1 event=1
capiplugin: leased line (adslpppoe)
plci_change_state:0x102 1 -> 2 event=3
plci_change_state:0x102 2 -> 3 event=6
ncci_change_state:0x102 0 -> 1 event=1
ncci_change_state:0x10102 1 -> 3 event=3
ncci_change_state:0x10102 3 -> 7 event=10
ncci_change_state:0x10102 7 -> 0 event=13
plci_change_state:0x102 3 -> 7 event=8
plci_change_state:0x102 7 -> 8 event=9
plci_change_state:0x102 8 -> 0 event=11
capiplugin: disconnect(remote): "" -> "" outgoing (pcli=0x102/ncci=0x10102) 0x0000 (0x0000) - No additional information
plci_change_state:0x0 0 -> 1 event=1
capiplugin: leased line (adslpppoe)
plci_change_state:0x102 1 -> 2 event=3
plci_change_state:0x102 2 -> 3 event=6
ncci_change_state:0x102 0 -> 1 event=1
ncci_change_state:0x10102 1 -> 3 event=3
ncci_change_state:0x10102 3 -> 7 event=10
ncci_change_state:0x10102 7 -> 0 event=13
plci_change_state:0x102 3 -> 7 event=8
plci_change_state:0x102 7 -> 8 event=9
plci_change_state:0x102 8 -> 0 event=11
capiplugin: disconnect(remote): "" -> "" outgoing (pcli=0x102/ncci=0x10102) 0x0000 (0x0000) - No additional information
capiplugin: couldn't make connection
controller 2: listen_change_state 0 -> 1
controller 1: listen_change_state 0 -> 1
controller 1: listen_change_state state=1 event=1 ????
controller 1: listen_change_state state=1 event=1 ????
contr 2: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0
controller 2: listen_change_state 1 -> 0
capiplugin: exit
Plugin capiplugin.so loaded.
capiplugin: $Revision: 1.36 $
capiconn:  1.13
Using interface ppp0
local  IP address 10.112.112.112
remote IP address 10.112.112.113
capiplugin: phase dormant.
loading adsl parameters from /etc/drdsl/adsl.conf ...
capiplugin: contr=2
capiplugin: contr=1
capiplugin: contr=1
capiplugin: contr=1
controller 2: listen_change_state 0 -> 1
controller 1: listen_change_state 0 -> 1
controller 1: listen_change_state state=1 event=1 ????
controller 1: listen_change_state state=1 event=1 ????
contr 2: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0
controller 2: listen_change_state 1 -> 0
contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0
controller 1: listen_change_state 1 -> 0
contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0
controller 1: listen_change_state state=0 event=3 ????
contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0
controller 1: listen_change_state state=0 event=3 ????
Starting link
capiplugin: phase serialconn (was dormant).
plci_change_state:0x0 0 -> 1 event=1
capiplugin: leased line (adslpppoe)
plci_change_state:0x102 1 -> 2 event=3
plci_change_state:0x102 2 -> 3 event=6
ncci_change_state:0x102 0 -> 1 event=1
ncci_change_state:0x10102 1 -> 3 event=3
ncci_change_state:0x10102 3 -> 7 event=10
ncci_change_state:0x10102 7 -> 0 event=13
plci_change_state:0x102 3 -> 7 event=8
plci_change_state:0x102 7 -> 8 event=9
plci_change_state:0x102 8 -> 0 event=11
capiplugin: disconnect(remote): "" -> "" outgoing (pcli=0x102/ncci=0x10102) 0x0000 (0x0000) - No additional information
+ /bin/rm /opt/files/asterisk-files.tar.bz2
+ /bin/ln -s /data/asterisk/voicemail/default /var/lib/asterisk/sounds/vm
+ /bin/ln -s /data/asterisk/voicemail /var/lib/asterisk/sounds/voicemail
+ /bin/ln -s /data/asterisk/astdb /var/lib/asterisk/astdb
+ chmod 755 /opt/files/lib/ld-2.2.5.so
+ chmod 755 /opt/files/lib/libncurses.so.5.2
+ chmod 755 /opt/files/usr/lib/libgcc_s.so.1
+ chmod 755 /opt/files/usr/lib/libpri.so.1.0
+ chmod 755 /opt/files/usr/lib/libtonezone.so.1.0
+ chmod 755 /opt/files/usr/lib/libspeex.so.1
+ /bin/ln -s /opt/files/usr/lib/libgcc_s.so.1 /usr/lib/libgcc_s.so
+ /bin/ln -s /opt/files/usr/lib/libpri.so.1.0 /usr/lib/libpri.so.1
+ /bin/ln -s /opt/files/usr/lib/libtonezone.so.1.0 /usr/lib/libtonezone.so.1
+ /bin/ln -s /opt/files/lib/ld-2.2.5.so /lib/ld-linux.so.2
+ /bin/ln -s /opt/files/lib/libncurses.so.5.2 /lib/libncurses.so.5
ln: /lib/libncurses.so.5: File exists
+ /bin/rm /usr/lib/libcapi20.so.3
+ /bin/ln -s /opt/files/usr/lib/libcapi20.so.3.0.4as /usr/lib/libcapi20.so.3
+ /bin/rm /lib/libpthread.so.0
+ /bin/ln -s /opt/files/lib/libpthread.so.0 /lib/libpthread.so.0
+ /bin/ln -s /opt/files/usr/sbin/asterisk /usr/sbin/asterisk
ln: /usr/sbin/asterisk: File exists
+ /bin/ln -s /opt/files/sbin/register /usr/sbin/register
+ /bin/ln -s /opt/files/sbin/mpg123 /usr/sbin/mpg123
+ /bin/ln -s /opt/files/sbin/ztgcfg /usr/sbin/ztgcfg
+ [ no = yes ]
+ [ no = yes ]
+ [ yes = yes ]
+
+ chmod 755 /etc/asterisk/zapata.conf
+ echo [channels]
+ echo language=de
+ echo switchtype=euroisdn
+ echo signalling=bri_net_ptmp
+ echo pridialplan=local
+ echo echocancel=yes
+ echo immediate=no
+ echo ;setcallerid(<>)
+ echo overlapdial=yes
+ echo group=1
+ echo context=default
+ echo channel=>1-2
+ echo ;
+ echo ;signalling = bri_cpe_ptmp
+ echo ;group = 2
+ echo ;channel => 4-5
+ echo
+ [ no = yes ]
+
+ chmod 755 /etc/zaptel.conf
+ echo # hfc-s pci a span definition
+ echo # most of the values should be bogus because we are not really zaptel
+ echo loadzone=nl
+ echo defaultzone=nl
+ echo
+ echo # HFC ISDN card
+ echo span=1,1,3,ccs,ami
+ echo bchan=1-2
+ echo dchan=3
+ echo
+ [ no = yes ]
+ [ no = yes ]
+ [ yes = yes ]
+
+ chmod 755 /etc/asterisk/modules.conf
+ echo [modules]
+ echo autoload=yes
plci_change_state:0x0 0 -> 1 event=1
capiplugin: leased line (adslpppoe)
plci_change_state:0x102 1 -> 2 event=3
plci_change_state:0x102 2 -> 3 event=6
ncci_change_state:0x102 0 -> 1 event=1
+ echo noload => pbx_gtkconsole.so
+ echo noload => pbx_kdeconsole.so
+ echo noload => chan_modem_i4l.so
ncci_change_state:0x10102 1 -> 3 event=3
ncci_change_state:0x10102 3 -> 7 event=10
ncci_change_state:0x10102 7 -> 0 event=13
plci_change_state:0x102 3 -> 7 event=8
+ echo noload => chan_modem_bestdata.so
plci_change_state:0x102 7 -> 8 event=9
plci_change_state:0x102 8 -> 0 event=11
capiplugin: disconnect(remote): "" -> "" outgoing (pcli=0x102/ncci=0x10102) 0x0000 (0x0000) - No additional information
+ echo noload => chan_modem_aopen.so
+ echo noload => chan_modem.so
+ echo noload => app_intercom.so
+ echo noload => chan_skinny.so
+ [ yes = yes ]
+ echo load => chan_capi.so
+ [ yes = yes ]
+ [ yes = no ]
+ [ yes = yes ]
+ echo load => res_musiconhold.so
+ echo noload => chan_elsa.so
+ echo noload => chan_oss.so
+ echo [global]
+ echo chan_capi.so=yes
+ mkdir -p /data/asterisk/voicemail/default
+ [ ! -f /data/asterisk/astdb ]
+ mkdir /var/spool/asterisk
+ ln -s /data/asterisk/voicemail/default /var/spool/asterisk/vm
+ ln -s /data/asterisk/voicemail /var/spool/asterisk/voicemail
+ mkdir /var/log/asterisk
+ mkdir /var/log/asterisk/cdr-csv
+ [ -f /data/asterisk/Master.csv ]
+ mount -o remount,ro /dev/hda1 /boot
+ mount -o remount,ro /dev/hda2 /opt
mount: Mounting /dev/hda2 on /opt failed: Invalid argument
+ [ yes = yes ]
+ mkdir -p /dev/zap
+ mknod /dev/zap/ctl c 196 0
+ mknod /dev/zap/timer c 196 253
+ mknod /dev/zap/channel c 196 254
+ mknod /dev/zap/pseudo c 196 255
+ do_insmod zaptel
+ /sbin/insmod zaptel
+ res=0
+ [ !  -o yes = yes ]
+ [ 0 != 0 ]
+ cat /tmp/insmod.res
Using /lib/modules/2.4.32/misc/zaptel.o
+ [ yes = yes ]
+ do_insmod zaphfc modes=1
+ /sbin/insmod zaphfc modes=1
+ res=0
+ [ !  -o yes = yes ]
+ [ 0 != 0 ]
+ cat /tmp/insmod.res
Using /lib/modules/2.4.32/misc/zaphfc.o
+ hdparm -u 1 /dev/hda

/dev/hda:
 setting unmaskirq to 1 (on)
 unmaskirq    =  1 (on)
+ [ no = yes ]
+ [ yes = yes ]
+ ztcfg -vvvv

Zaptel Configuration
======================

SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)

Channel map:

Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: D-channel (Default) (Slaves: 03)

3 channels configured.

Changing signalling on channel 1 from Unused to Clear channel
Changing signalling on channel 2 from Unused to Clear channel
Changing signalling on channel 3 from Unused to HDLC with FCS check
+ fli4lctrl dial pppoe
+ asterisk
asterisk: error while loading shared libraries: libpthread.so.0: cannot open shared object file: Error 40
+ end_script
+ set +x
finished Starting Asterisk ... (/etc/rc.d/rc999.asterisk)

Gruß Henning

ploieel · 26 Mrz 2006

Ja, download läuft bereits.

dann asterisk.txt, extensions.conf, sip.conf, zapata.conf, capi.conf, meetme.conf usw. vom alten Asterisk übernehmen usw.... dann build-Prozess, dann imonc zum hochladen, kann ein paar Minuten dauern...

Hab ich was wichtiges vergessen?

Netview · 26 Mrz 2006

Hallo Henning,

das libthread-Problem hab ich nicht :-(

lib:
lrwxrwxrwx 1 root root 30 Mar 26 14:24 libpthread.so.0 -> /opt/files/lib/libpthread.so.0

/opt/files/lib:
-rw-r--r-- 1 root root 106670 Apr 29 2005 libpthread.so.0

ploieel · 26 Mrz 2006

Hallo Netview,
leider auch bei RC2 unverändert:

Code:

fli4l 3.0.1 # asterisk -r
-sh: asterisk: not found
fli4l 3.0.1 # asterisk
-sh: asterisk: not found
fli4l 3.0.1 # asterisk -vvvvvgc
-sh: asterisk: not found
fli4l 3.0.1 #

edit:
zu spät gesehen,..... muss noch das patched file einarbeiten...

opt_asterisk_3.0.0-RC5 für fli4l 3.0.x

IPPF-Promi

Aktives Mitglied

IPPF-Promi

Aktives Mitglied

IPPF-Promi

Aktives Mitglied

Neuer User

Aktives Mitglied

IPPF-Promi

Aktives Mitglied

Neuer User

IPPF-Promi

Aktives Mitglied

IPPF-Promi

Aktives Mitglied

IPPF-Promi

Neuer User

Aktives Mitglied

IPPF-Promi

Aktives Mitglied

Statistik des Forums