[Frage] Fritz!DECT 200 API

ALT:
  <device>
    <AIN>xxxxxx</AIN>
    <name>Licht Wohnz vorne</name>
    <switchstate>0</switchstate>
    <switchmode>1</switchmode>
    <switchpresent>1</switchpresent>
    <power>0</power>
    <energy>43806</energy>
  </device>

NEU:
  <device identifier="xxxxxx" id="16" functionbitmask="896" fwversion="03.33" manufacturer="AVM" productname="FRITZ!DECT 200">
    <present>1</present>
    <name>Licht Wohnz vorne</name>
    <switch>
      <state>0</state>
      <mode>manuell</mode>
      <lock>0</lock>
    </switch>
    <powermeter>
      <power>0</power>
      <energy>44512</energy>
    </powermeter>
    <temperature>
      <celsius>246</celsius>
      <offset>0</offset>
    </temperature>
  </device>

"ajax_id": 0, 
"shares": {
}, 
"devices": [{
    "pv_max": 0, 
    "FunctionBitMask": 896, 
    "DeviceType": 9, 
    "GroupHash": "0", 
    "ID": 16, 
    "SubModel": "0x0002", 
    "Valid": 2, 
    "Identifyer": "...", 
    "ProductName": "FRITZ!DECT 200", 
    "temperature": 246, 
    "pv_now": 0, 
    "UpdatePresent": 0, 
    "Name": "Lampe", 
    "Model": "0x0007", 
    "pv_min": 0, 
    "switch": {
      "LEDState": 2, 
      "Options": 2, 
      "Devicetype": 9, 
      "ID": 16, 
      "SwitchOn": 0, 
      "SwitchLock": 0
    }, 
    "FWVersion": "03.33", 
    "Manufacturer": "AVM"
  }, {
    "pv_max": -1, 
    "FunctionBitMask": 640, 
    "DeviceType": 9, 
    "GroupHash": "0", 
    "ID": 17, 
    "SubModel": "0x0002", 
    "Valid": 1, 
    "Identifyer": "...", 
    "ProductName": "FRITZ!DECT 200", 
    "temperature": -9999, 
    "pv_now": -1, 
    "UpdatePresent": 0, 
    "Name": "Ventilator", 
    "Model": "0x0007", 
    "pv_min": -1, 
    "switch": {
      "LEDState": 65535, 
      "Options": 65535, 
      "Devicetype": 9, 
      "ID": 17, 
      "SwitchOn": 0, 
      "SwitchLock": 65535
    }, 
    "FWVersion": "03.33", 
    "Manufacturer": "AVM"
  }], 
"area": "homeautoArea"
}