Seite 23 von 23 ErsteErste ... 131920212223
Ergebnis 441 bis 449 von 449

Thema: PPTP Server auf der Fritzbox funktioniert

  1. 28.02.2009, 18:42 #441
    tiscali
    tiscali is offline
    IPPF-Erfahrener
    Registriert seit
    17.07.2008
    Beiträge
    80
    danke dir, habe das vorhin auch schon festgestellt das trac offline ist, eines der fehler die es sein können (http://trac.freetz.org/ticket/344) konnte deswegen noch nicht probieren.
    aber mit deinem patch klappt es danke dir ..

    jetzt muss ich nur noch

    Feb 28 18:47:13 fritz daemon.err pppd[1579]: Received bad configure-ack: 12 06 01 00 00 40
    Feb 28 18:47:16 fritz daemon.err pppd[1579]: Received bad configure-ack: 12 06 01 00 00 40
    Feb 28 18:47:19 fritz daemon.err pppd[1579]: Received bad configure-ack: 12 06 01 00 00 40
    Feb 28 18:47:22 fritz daemon.err pppd[1579]: Received bad configure-ack: 12 06 01 00 00 40
    finden woran das liegt..
    Geändert von tiscali (28.02.2009 um 18:49 Uhr)
    AVM FRITZ!Box 7270
    Firmware:54.04.70 freetz-devel-3083
    Optionen: +busybox +enum +kernel (iln6) +avm-firewall-2.0.4_rc2 +dropbear-0.52 +pppd-2.4.4 +privoxy-3.0.10 +vsftpd-2.0.7 +haserl-0.9.25 +iptables-1.4.1.1 +modcgi-0.2 +ntfs-1.5130 +pptp-1.7.2 +pptpd-1.3.4
    Anbindung: Vodafone Mobile Connect Flat
    UMTS-Stick: K3520
    Zitieren Zitieren
  2. 28.02.2009, 18:47 #442
    cuma
    cuma is offline
    IPPF-Zweitausend-VIP
    Registriert seit
    16.12.2006
    Beiträge
    2.260
    Hallo, ich hab Ticket 336 gemeint.
    7270v2 54.04.88-freetz-devel (replaced kernel) im ATA-Modus
    Zitieren Zitieren
  3. 28.02.2009, 19:00 #443
    tiscali
    tiscali is offline
    IPPF-Erfahrener
    Registriert seit
    17.07.2008
    Beiträge
    80
    mit deinem hat es ja auch funktioniert. Danke dir nochmal
    intern und extern von winxp nach FB funktioniert, die fehlermeldung kommt nur bei SymVPN v.1.00.52 beim Nokia
    habe jetzt in die config
    http://forum.telexy.com/ShowPost.aspx?PostID=1412
    eingefügt bzw geändert, jetzt kommt folgender fehler


    Feb 28 19:21:22 fritz daemon.info pptpd[2620]: CTRL: Starting call (launching pppd, opening GRE)
    Feb 28 19:21:22 fritz daemon.err pppd[2621]: In file /etc/ppp/options.pptpd: unrecognized option 'require-mppe-40'
    Feb 28 19:21:22 fritz daemon.err pptpd[2620]: GRE: read(fd=7,buffer=42197c,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs
    Feb 28 19:21:22 fritz daemon.err pptpd[2620]: CTRL: PTY read or GRE write failed (pty,gre)=(7,
    Feb 28 19:21:22 fritz daemon.debug pptpd[2620]: CTRL: Reaping child PPP[2621]
    Geändert von tiscali (28.02.2009 um 19:21 Uhr)
    AVM FRITZ!Box 7270
    Firmware:54.04.70 freetz-devel-3083
    Optionen: +busybox +enum +kernel (iln6) +avm-firewall-2.0.4_rc2 +dropbear-0.52 +pppd-2.4.4 +privoxy-3.0.10 +vsftpd-2.0.7 +haserl-0.9.25 +iptables-1.4.1.1 +modcgi-0.2 +ntfs-1.5130 +pptp-1.7.2 +pptpd-1.3.4
    Anbindung: Vodafone Mobile Connect Flat
    UMTS-Stick: K3520
    Zitieren Zitieren
  4. 28.02.2009, 19:35 #444
    cuma
    cuma is offline
    IPPF-Zweitausend-VIP
    Registriert seit
    16.12.2006
    Beiträge
    2.260
    Na, die Option wird wohl nicht angenommen. Bei mir steht in der Datei "mppe required"
    7270v2 54.04.88-freetz-devel (replaced kernel) im ATA-Modus
    Zitieren Zitieren
  5. 28.02.2009, 19:46 #445
    tiscali
    tiscali is offline
    IPPF-Erfahrener
    Registriert seit
    17.07.2008
    Beiträge
    80
    wenn ich nur mppe required einstelle kommt.

    Code:
    Feb 28 19:37:34 fritz daemon.notice pppd[3349]: Connect: ppp0 <--> /dev/pts/2
Feb 28 19:37:34 fritz daemon.debug pppd[3349]: sent [LCP ConfReq id=0x1 <mru 1000> <asyncmap 0x0> <auth chap MS-v2> <magic 0x7193686c> <pcomp> <accomp>]
Feb 28 19:37:34 fritz daemon.debug pppd[3349]: rcvd [LCP ConfReq id=0x1 <mru 1400> <magic 0x6a7b02b> <pcomp> <accomp> <callback CBCP>]
Feb 28 19:37:34 fritz daemon.debug pppd[3349]: sent [LCP ConfRej id=0x1 <callback CBCP>]
Feb 28 19:37:34 fritz daemon.debug pppd[3349]: rcvd [LCP ConfRej id=0x1 <asyncmap 0x0>]
Feb 28 19:37:34 fritz daemon.debug pppd[3349]: sent [LCP ConfReq id=0x2 <mru 1000> <auth chap MS-v2> <magic 0x7193686c> <pcomp> <accomp>]
Feb 28 19:37:35 fritz daemon.debug pppd[3349]: rcvd [LCP ConfReq id=0x2 <mru 1400> <magic 0x6a7b02b> <pcomp> <accomp>]
Feb 28 19:37:35 fritz daemon.debug pppd[3349]: sent [LCP ConfAck id=0x2 <mru 1400> <magic 0x6a7b02b> <pcomp> <accomp>]
Feb 28 19:37:35 fritz daemon.debug pppd[3349]: rcvd [LCP ConfAck id=0x2 <mru 1000> <auth chap MS-v2> <magic 0x7193686c> <pcomp> <accomp>]
Feb 28 19:37:35 fritz daemon.debug pppd[3349]: sent [CHAP Challenge id=0x0 <cdbc7fcfaa1ee97bd7c439ff567f7945>, name = "fritzbox"]
Feb 28 19:37:35 fritz daemon.debug pppd[3349]: rcvd [LCP Ident id=0x3 magic=0x6a7b02b "Telexy VPN"]
Feb 28 19:37:35 fritz daemon.debug pppd[3349]: rcvd [CHAP Response id=0x0 <07ff2ae178534d9b50e78e8b616a4ed0000000000000000020d49da3705859c77a453478cbf17205e28306a28b54c32c00>, name = "avm"]
Feb 28 19:37:35 fritz daemon.warn pppd[3349]: Warning - secret file /etc/ppp/chap-secrets has world and/or group access
Feb 28 19:37:35 fritz daemon.debug pppd[3349]: sent [CHAP Success id=0x0 "S=6A0B1D4AA91371DF6A560D0ADD845156D3967BB8 M=Access granted"]
Feb 28 19:37:35 fritz daemon.debug pppd[3349]: sent [CCP ConfReq id=0x1 <mppe -H +M +S +L -D +C>]
Feb 28 19:37:35 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x4 <mppe +H +M +S +L -D -C>]
Feb 28 19:37:35 fritz daemon.debug pppd[3349]: sent [CCP ConfNak id=0x4 <mppe -H -M +S -L -D -C>]
Feb 28 19:37:35 fritz daemon.debug pppd[3349]: rcvd [IPCP ConfReq id=0x5 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-wins 0.0.0.0> <ms-dns3 0.0.0.0> <ms-wins 0.0.0.0>]
Feb 28 19:37:35 fritz daemon.debug pppd[3349]: sent [IPCP TermAck id=0x5]
Feb 28 19:37:35 fritz daemon.debug pppd[3349]: rcvd [CCP ConfNak id=0x1 <mppe +H -M +S -L -D -C>]
Feb 28 19:37:35 fritz daemon.debug pppd[3349]: sent [CCP ConfReq id=0x2 <mppe -H -M +S -L -D -C>]
Feb 28 19:37:35 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x6 <mppe +H -M +S -L -D -C>]
Feb 28 19:37:35 fritz daemon.debug pppd[3349]: sent [CCP ConfNak id=0x6 <mppe -H -M +S -L -D -C>]
Feb 28 19:37:35 fritz daemon.debug pppd[3349]: rcvd [CCP ConfAck id=0x2 <mppe +H -M +S -L -D -C>]
Feb 28 19:37:35 fritz daemon.err pppd[3349]: Received bad configure-ack:  12 06 01 00 00 40
Feb 28 19:37:35 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x7 <mppe +H -M +S -L -D -C>]
Feb 28 19:37:35 fritz daemon.debug pppd[3349]: sent [CCP ConfNak id=0x7 <mppe -H -M +S -L -D -C>]
Feb 28 19:37:35 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x8 <mppe +H -M +S -L -D -C>]
Feb 28 19:37:35 fritz daemon.debug pppd[3349]: sent [CCP ConfNak id=0x8 <mppe -H -M +S -L -D -C>]
Feb 28 19:37:36 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x9 <mppe +H -M +S -L -D -C>]
Feb 28 19:37:36 fritz daemon.debug pppd[3349]: sent [CCP ConfNak id=0x9 <mppe -H -M +S -L -D -C>]
Feb 28 19:37:36 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0xa <mppe +H -M +S -L -D -C>]
Feb 28 19:37:36 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0xa <mppe +H -M +S -L -D -C>]
Feb 28 19:37:36 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0xb <mppe +H +M -S +L -D -C>]
Feb 28 19:37:36 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0xb <mppe +H +M -S -L -D -C>]
Feb 28 19:37:36 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0xc <mppe +H -M +S +L -D -C>]
Feb 28 19:37:36 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0xc <mppe +H -M +S -L -D -C>]
Feb 28 19:37:36 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0xd <mppe +H +M -S +L -D -C>]
Feb 28 19:37:36 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0xd <mppe +H +M -S -L -D -C>]
Feb 28 19:37:36 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0xe <mppe +H -M +S +L -D -C>]
Feb 28 19:37:36 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0xe <mppe +H -M +S -L -D -C>]
Feb 28 19:37:37 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0xf <mppe +H +M -S +L -D -C>]
Feb 28 19:37:37 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0xf <mppe +H +M -S -L -D -C>]
Feb 28 19:37:37 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x10 <mppe +H -M +S +L -D -C>]
Feb 28 19:37:37 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x10 <mppe +H -M +S -L -D -C>]
Feb 28 19:37:37 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x11 <mppe +H +M -S +L -D -C>]
Feb 28 19:37:37 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x11 <mppe +H +M -S -L -D -C>]
Feb 28 19:37:37 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x12 <mppe +H -M +S +L -D -C>]
Feb 28 19:37:37 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x12 <mppe +H -M +S -L -D -C>]
Feb 28 19:37:37 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x13 <mppe +H +M -S +L -D -C>]
Feb 28 19:37:37 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x13 <mppe +H +M -S -L -D -C>]
Feb 28 19:37:37 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x14 <mppe +H -M +S +L -D -C>]
Feb 28 19:37:37 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x14 <mppe +H -M +S -L -D -C>]
Feb 28 19:37:38 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x15 <mppe +H +M -S +L -D -C>]
Feb 28 19:37:38 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x15 <mppe +H +M -S -L -D -C>]
Feb 28 19:37:38 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x16 <mppe +H -M +S +L -D -C>]
Feb 28 19:37:38 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x16 <mppe +H -M +S -L -D -C>]
Feb 28 19:37:38 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x17 <mppe +H +M -S +L -D -C>]
Feb 28 19:37:38 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x17 <mppe +H +M -S -L -D -C>]
Feb 28 19:37:38 fritz daemon.debug pppd[3349]: sent [CCP ConfReq id=0x2 <mppe -H -M +S -L -D -C>]
Feb 28 19:37:38 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x18 <mppe +H -M +S +L -D -C>]
Feb 28 19:37:38 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x18 <mppe +H -M +S -L -D -C>]
Feb 28 19:37:38 fritz daemon.debug pppd[3349]: rcvd [CCP ConfAck id=0x2 <mppe +H -M +S -L -D -C>]
Feb 28 19:37:38 fritz daemon.err pppd[3349]: Received bad configure-ack:  12 06 01 00 00 40
Feb 28 19:37:38 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x19 <mppe +H +M -S +L -D -C>]
Feb 28 19:37:38 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x19 <mppe +H +M -S -L -D -C>]
Feb 28 19:37:38 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x1a <mppe +H -M +S +L -D -C>]
Feb 28 19:37:38 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x1a <mppe +H -M +S -L -D -C>]
Feb 28 19:37:38 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x1b <mppe +H +M -S +L -D -C>]
Feb 28 19:37:38 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x1b <mppe +H +M -S -L -D -C>]
Feb 28 19:37:39 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x1c <mppe +H -M +S +L -D -C>]
Feb 28 19:37:39 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x1c <mppe +H -M +S -L -D -C>]
Feb 28 19:37:39 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x1d <mppe +H +M -S +L -D -C>]
Feb 28 19:37:39 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x1d <mppe +H +M -S -L -D -C>]
Feb 28 19:37:39 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x1e <mppe +H -M +S +L -D -C>]
Feb 28 19:37:39 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x1e <mppe +H -M +S -L -D -C>]
Feb 28 19:37:39 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x1f <mppe +H +M -S +L -D -C>]
Feb 28 19:37:39 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x1f <mppe +H +M -S -L -D -C>]
Feb 28 19:37:39 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x20 <mppe +H -M +S +L -D -C>]
Feb 28 19:37:39 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x20 <mppe +H -M +S -L -D -C>]
Feb 28 19:37:39 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x21 <mppe +H +M -S +L -D -C>]
Feb 28 19:37:39 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x21 <mppe +H +M -S -L -D -C>]
Feb 28 19:37:40 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x22 <mppe +H -M +S +L -D -C>]
Feb 28 19:37:40 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x22 <mppe +H -M +S -L -D -C>]
Feb 28 19:37:40 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x23 <mppe +H +M -S +L -D -C>]
Feb 28 19:37:40 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x23 <mppe +H +M -S -L -D -C>]
Feb 28 19:37:40 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x24 <mppe +H -M +S +L -D -C>]
Feb 28 19:37:40 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x24 <mppe +H -M +S -L -D -C>]
Feb 28 19:37:40 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x25 <mppe +H +M -S +L -D -C>]
Feb 28 19:37:40 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x25 <mppe +H +M -S -L -D -C>]
Feb 28 19:37:40 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x26 <mppe +H -M +S +L -D -C>]
Feb 28 19:37:40 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x26 <mppe +H -M +S -L -D -C>]
Feb 28 19:37:40 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x27 <mppe +H +M -S +L -D -C>]
Feb 28 19:37:40 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x27 <mppe +H +M -S -L -D -C>]
Feb 28 19:37:41 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x28 <mppe +H -M +S +L -D -C>]
Feb 28 19:37:41 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x28 <mppe +H -M +S -L -D -C>]
Feb 28 19:37:41 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x29 <mppe +H +M -S +L -D -C>]
Feb 28 19:37:41 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x29 <mppe +H +M -S -L -D -C>]
Feb 28 19:37:41 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x2a <mppe +H -M +S +L -D -C>]
Feb 28 19:37:41 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x2a <mppe +H -M +S -L -D -C>]
Feb 28 19:37:41 fritz daemon.debug pppd[3349]: sent [CCP ConfReq id=0x2 <mppe -H -M +S -L -D -C>]
Feb 28 19:37:41 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x2b <mppe +H +M -S +L -D -C>]
Feb 28 19:37:41 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x2b <mppe +H +M -S -L -D -C>]
Feb 28 19:37:41 fritz daemon.debug pppd[3349]: rcvd [CCP ConfAck id=0x2 <mppe +H -M +S -L -D -C>]
Feb 28 19:37:41 fritz daemon.err pppd[3349]: Received bad configure-ack:  12 06 01 00 00 40
Feb 28 19:37:41 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x2c <mppe +H -M +S +L -D -C>]
Feb 28 19:37:41 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x2c <mppe +H -M +S -L -D -C>]
Feb 28 19:37:41 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x2d <mppe +H +M -S +L -D -C>]
Feb 28 19:37:41 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x2d <mppe +H +M -S -L -D -C>]
Feb 28 19:37:42 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x2e <mppe +H -M +S +L -D -C>]
Feb 28 19:37:42 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x2e <mppe +H -M +S -L -D -C>]
Feb 28 19:37:42 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x2f <mppe +H +M -S +L -D -C>]
Feb 28 19:37:42 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x2f <mppe +H +M -S -L -D -C>]
Feb 28 19:37:42 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x30 <mppe +H -M +S +L -D -C>]
Feb 28 19:37:42 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x30 <mppe +H -M +S -L -D -C>]
Feb 28 19:37:42 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x31 <mppe +H +M -S +L -D -C>]
Feb 28 19:37:42 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x31 <mppe +H +M -S -L -D -C>]
Feb 28 19:37:42 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x32 <mppe +H -M +S +L -D -C>]
Feb 28 19:37:42 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x32 <mppe +H -M +S -L -D -C>]
Feb 28 19:37:42 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x33 <mppe +H +M -S +L -D -C>]
Feb 28 19:37:42 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x33 <mppe +H +M -S -L -D -C>]
Feb 28 19:37:42 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x34 <mppe +H -M +S +L -D -C>]
Feb 28 19:37:42 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x34 <mppe +H -M +S -L -D -C>]
Feb 28 19:37:43 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x35 <mppe +H +M -S +L -D -C>]
Feb 28 19:37:43 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x35 <mppe +H +M -S -L -D -C>]
Feb 28 19:37:43 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x36 <mppe +H -M +S +L -D -C>]
Feb 28 19:37:43 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x36 <mppe +H -M +S -L -D -C>]
Feb 28 19:37:43 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x37 <mppe +H +M -S +L -D -C>]
Feb 28 19:37:43 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x37 <mppe +H +M -S -L -D -C>]
Feb 28 19:37:43 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x38 <mppe +H -M +S +L -D -C>]
Feb 28 19:37:43 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x38 <mppe +H -M +S -L -D -C>]
Feb 28 19:37:43 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x39 <mppe +H +M -S +L -D -C>]
Feb 28 19:37:43 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x39 <mppe +H +M -S -L -D -C>]
Feb 28 19:37:43 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x3a <mppe +H -M +S +L -D -C>]
Feb 28 19:37:43 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x3a <mppe +H -M +S -L -D -C>]
Feb 28 19:37:44 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x3b <mppe +H +M -S +L -D -C>]
Feb 28 19:37:44 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x3b <mppe +H +M -S -L -D -C>]
Feb 28 19:37:44 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x3c <mppe +H -M +S +L -D -C>]
Feb 28 19:37:44 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x3c <mppe +H -M +S -L -D -C>]
Feb 28 19:37:44 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x3d <mppe +H +M -S +L -D -C>]
Feb 28 19:37:44 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x3d <mppe +H +M -S -L -D -C>]
Feb 28 19:37:44 fritz daemon.debug pppd[3349]: sent [CCP ConfReq id=0x2 <mppe -H -M +S -L -D -C>]
Feb 28 19:37:44 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x3e <mppe +H -M +S +L -D -C>]
Feb 28 19:37:44 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x3e <mppe +H -M +S -L -D -C>]
Feb 28 19:37:44 fritz daemon.debug pppd[3349]: rcvd [CCP ConfAck id=0x2 <mppe +H -M +S -L -D -C>]
Feb 28 19:37:44 fritz daemon.err pppd[3349]: Received bad configure-ack:  12 06 01 00 00 40
Feb 28 19:37:44 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x3f <mppe +H +M -S +L -D -C>]
Feb 28 19:37:44 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x3f <mppe +H +M -S -L -D -C>]
Feb 28 19:37:44 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x40 <mppe +H -M +S +L -D -C>]
Feb 28 19:37:44 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x40 <mppe +H -M +S -L -D -C>]
Feb 28 19:37:45 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x41 <mppe +H +M -S +L -D -C>]
Feb 28 19:37:45 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x41 <mppe +H +M -S -L -D -C>]
Feb 28 19:37:45 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x42 <mppe +H -M +S +L -D -C>]
Feb 28 19:37:45 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x42 <mppe +H -M +S -L -D -C>]
Feb 28 19:37:45 fritz daemon.debug pppd[3349]: rcvd [CCP ConfReq id=0x43 <mppe +H +M -S +L -D -C>]
Feb 28 19:37:45 fritz daemon.debug pppd[3349]: sent [CCP ConfRej id=0x43 <mppe +H +M -S -L -D -C>]
Feb 28 19:37:45 fritz daemon.debug pppd[3349]: rcvd [LCP TermReq id=0x44 "+\37777777660\37777777647\006"]
Feb 28 19:37:45 fritz daemon.info pppd[3349]: LCP terminated by peer (+M-0M-'^F)
Feb 28 19:37:45 fritz daemon.debug pppd[3349]: sent [LCP TermAck id=0x44]
Feb 28 19:37:45 fritz daemon.debug pptpd[3348]: CTRL: Reaping child PPP[3349]
Feb 28 19:37:45 fritz daemon.notice pppd[3349]: Modem hangup
Feb 28 19:37:45 fritz daemon.notice pppd[3349]: Connection terminated.
Feb 28 19:37:45 fritz daemon.info pppd[3349]: Connect time 0.2 minutes.
Feb 28 19:37:45 fritz daemon.info pppd[3349]: Sent 684 bytes, received 714 bytes.
Feb 28 19:37:45 fritz daemon.info pppd[3349]: Exit.
Feb 28 19:37:45 fritz daemon.info pptpd[3348]: CTRL: Client xx.xxx.xxx.xxx control connection finished
    die config dazu
    Code:
    # Name of the local system for authentication purposes 
# (must match the second field in /etc/ppp/chap-secrets entries)
name fritzbox

# Strip the domain prefix from the username before authentication.
# (applies if you use pppd with chapms-strip-domain patch)
#chapms-strip-domain

# Authentication
refuse-pap
refuse-chap

# Require the peer to authenticate itself using MS-CHAPv2 [Microsoft
# Challenge Handshake Authentication Protocol, Version 2] authentication.
require-mschap
require-mschap-v2


# Encryption
# Require MPPE 128-bit encryption
# (note that MPPE requires the use of MSCHAP-V2 during authentication)
mppe required
#require-mppe-40
#require-mppe-128
#mppe stateless

# Network and Routing
mtu 1000                # max size for a packet on this network
mru 1000                # tells the max packet size to the other devices on the network
# If pppd is acting as a server for Microsoft Windows clients, this
# option allows pppd to supply one or two DNS (Domain Name Server)
# addresses to the clients.  The first instance of this option
# specifies the primary DNS address; the second instance (if given)
# specifies the secondary DNS address.
ms-dns 192.168.178.1

# If pppd is acting as a server for Microsoft Windows or "Samba"
# clients, this option allows pppd to supply one or two WINS (Windows
# Internet Name Services) server addresses to the clients.  The first
# instance of this option specifies the primary WINS address; the
# second instance (if given) specifies the secondary WINS address.
#ms-wins 10.0.0.3
#ms-wins 10.0.0.4

# Add an entry to this system's ARP [Address Resolution Protocol]
# table with the IP address of the peer and the Ethernet address of this
# system.  This will have the effect of making the peer appear to other
# systems to be on the local ethernet.
# (you do not need this if your PPTP server is responsible for routing
# packets to the clients -- James Cameron)
proxyarp

# Logging

# Enable connection debugging facilities.
# (see your syslog configuration for where pppd sends to)
debug

# Print out all the option values which have been set.
# (often requested by mailing list to verify options)
#dump

# Miscellaneous

# Create a UUCP-style lock file for the pseudo-tty to ensure exclusive
# access.
lock

# Disable BSD-Compress compression
nobsdcomp 

# Disable Deflate compression
#nodeflate

# Disable Van Jacobson compression 
# (needed on some networks with Windows 9x/ME/XP clients, see posting to
# poptop-server on 14th April 2005 by Pawel Pokrywka and followups,
# http://marc.theaimsgroup.com/?t=111343175400006&r=1&w=2 )
novj
novjccomp

# turn off logging to stderr, since this may be redirected to pptpd
#nologfd
    AVM FRITZ!Box 7270
    Firmware:54.04.70 freetz-devel-3083
    Optionen: +busybox +enum +kernel (iln6) +avm-firewall-2.0.4_rc2 +dropbear-0.52 +pppd-2.4.4 +privoxy-3.0.10 +vsftpd-2.0.7 +haserl-0.9.25 +iptables-1.4.1.1 +modcgi-0.2 +ntfs-1.5130 +pptp-1.7.2 +pptpd-1.3.4
    Anbindung: Vodafone Mobile Connect Flat
    UMTS-Stick: K3520
    Zitieren Zitieren
  6. 28.02.2009, 19:51 #446
    cuma
    cuma is offline
    IPPF-Zweitausend-VIP
    Registriert seit
    16.12.2006
    Beiträge
    2.260
    Es ist halt die Frage was dein Client unterstützt. Kann der "chap MS-v2"? Client und Server müssen sich halt "verstehen"
    7270v2 54.04.88-freetz-devel (replaced kernel) im ATA-Modus
    Zitieren Zitieren
  7. 28.02.2009, 19:59 #447
    tiscali
    tiscali is offline
    IPPF-Erfahrener
    Registriert seit
    17.07.2008
    Beiträge
    80
    schein er zu unterstützen,
    Feb 28 19:54:42 fritz daemon.debug pppd[3715]: sent [CHAP Success id=0x6 "S=DF7A220CB25FEFC8EFD2F907EB7BCFAB4016CD82 M=Access granted"]


    das ist das einzige was ich noch auf der HP vom hersteller gefunden habe
    PPTP VPN Server Software. -*
    Windows XP, Vista, 2003 Server.

    Linux ( in this case, during the test was used Slackware 12 )
    pptpd v.1.3.4 (latest as of 2009-Jan-08 )
    pppd v.2.4.4 (latest as of 2009-Jan-08 )
    Looks like it is the same as PoPToP - The PPTP Server for Linux.
    AVM FRITZ!Box 7270
    Firmware:54.04.70 freetz-devel-3083
    Optionen: +busybox +enum +kernel (iln6) +avm-firewall-2.0.4_rc2 +dropbear-0.52 +pppd-2.4.4 +privoxy-3.0.10 +vsftpd-2.0.7 +haserl-0.9.25 +iptables-1.4.1.1 +modcgi-0.2 +ntfs-1.5130 +pptp-1.7.2 +pptpd-1.3.4
    Anbindung: Vodafone Mobile Connect Flat
    UMTS-Stick: K3520
    Zitieren Zitieren
  8. 28.02.2009, 20:07 #448
    cuma
    cuma is offline
    IPPF-Zweitausend-VIP
    Registriert seit
    16.12.2006
    Beiträge
    2.260
    Bei mir sieht der Verbindungsaufbau so aus:
    Code:
    pptpd[11236]: CTRL: Client <CLIENT-IP> control connection started
pptpd[11236]: CTRL: Starting call (launching pppd, opening GRE)
pppd[11237]: pppd 2.4.4 started by root, uid 0
pppd[11237]: Using interface ppp0
pppd[11237]: Connect: ppp0 <--> /dev/pts/0
pptpd[11236]: CTRL: Ignored a SET LINK INFO packet with real ACCMs!
pppd[11237]: MPPC/MPPE 128-bit stateful compression enabled
pppd[11237]: found interface lan for proxy arp
pppd[11237]: local  IP address <FRITZ-IP>
pppd[11237]: remote IP address <VPN-IP>
    Und sind bei dir alle nötigen Module geladen:
    Code:
    $ lsmod|grep pp
ppp_mppe_mppc          14876  0
ppp_deflate             5424  0
ppp_async              10295  0
crc_ccitt               1698  1 ppp_async
ppp_generic            27220  3 ppp_mppe_mppc,ppp_deflate,ppp_async
slhc                    6167  1 ppp_generic
    7270v2 54.04.88-freetz-devel (replaced kernel) im ATA-Modus
    Zitieren Zitieren
  9. 28.02.2009, 20:19 #449
    tiscali
    tiscali is offline
    IPPF-Erfahrener
    Registriert seit
    17.07.2008
    Beiträge
    80
    so schaut es bei mir aus wenn ich von einem Windows rechner die verbindung aufbaue
    Code:
    Feb 28 20:18:01 fritz daemon.info pptpd[4694]: CTRL: Client 91.3.90.39 control connection started
Feb 28 20:18:01 fritz daemon.info pptpd[4694]: CTRL: Starting call (launching pppd, opening GRE)
Feb 28 20:18:01 fritz daemon.notice pppd[4695]: pppd 2.4.4 started by root, uid 0
Feb 28 20:18:01 fritz daemon.debug pppd[4695]: using channel 14
Feb 28 20:18:01 fritz daemon.info pppd[4695]: Using interface ppp0
Feb 28 20:18:01 fritz daemon.notice pppd[4695]: Connect: ppp0 <--> /dev/pts/2
Feb 28 20:18:01 fritz daemon.debug pppd[4695]: sent [LCP ConfReq id=0x1 <mru 1000> <asyncmap 0x0> <auth chap MS-v2> <magic 0x25701b33> <pcomp> <accomp>]
Feb 28 20:18:01 fritz daemon.debug pppd[4695]: rcvd [LCP ConfReq id=0x0 <mru 1400> <magic 0x2bdf66e3> <pcomp> <accomp> <callback CBCP>]
Feb 28 20:18:01 fritz daemon.debug pppd[4695]: sent [LCP ConfRej id=0x0 <callback CBCP>]
Feb 28 20:18:01 fritz daemon.debug pppd[4695]: rcvd [LCP ConfAck id=0x1 <mru 1000> <asyncmap 0x0> <auth chap MS-v2> <magic 0x25701b33> <pcomp> <accomp>]
Feb 28 20:18:01 fritz daemon.debug pppd[4695]: rcvd [LCP ConfReq id=0x1 <mru 1400> <magic 0x2bdf66e3> <pcomp> <accomp>]
Feb 28 20:18:01 fritz daemon.debug pppd[4695]: sent [LCP ConfAck id=0x1 <mru 1400> <magic 0x2bdf66e3> <pcomp> <accomp>]
Feb 28 20:18:01 fritz daemon.debug pppd[4695]: sent [CHAP Challenge id=0x3f <28c792f850189c2a9a3e9bbe0fe980f2>, name = "fritzbox"]
Feb 28 20:18:01 fritz daemon.debug pppd[4695]: rcvd [LCP Ident id=0x2 magic=0x2bdf66e3 "MSRASV5.10"]
Feb 28 20:18:01 fritz daemon.debug pppd[4695]: rcvd [LCP Ident id=0x3 magic=0x2bdf66e3 "MSRAS-0-PC900"]
Feb 28 20:18:01 fritz daemon.debug pppd[4695]: rcvd [CHAP Response id=0x3f <bebac4f0cb48de707bca7026bd2a94390000000000000000fd9be078eff7e9289894909fcf3fa72c373dea9fe62873ec00>, name = "avm"]
Feb 28 20:18:01 fritz daemon.err pptpd[4694]: CTRL: Ignored a SET LINK INFO packet with real ACCMs!
Feb 28 20:18:01 fritz daemon.debug pppd[4695]: sent [CHAP Success id=0x3f "S=9CE33E689C3E4D02F5E07E1617A65E41C6A2C1CC M=Access granted"]
Feb 28 20:18:01 fritz daemon.debug pppd[4695]: sent [CCP ConfReq id=0x1 <mppe -H +M +S +L -D +C>]
Feb 28 20:18:01 fritz daemon.debug pppd[4695]: rcvd [CCP ConfReq id=0x4 <mppe +H +M +S +L -D +C>]
Feb 28 20:18:01 fritz daemon.debug pppd[4695]: sent [CCP ConfNak id=0x4 <mppe -H -M +S -L -D +C>]
Feb 28 20:18:01 fritz daemon.debug pppd[4695]: rcvd [IPCP ConfReq id=0x5 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-wins 0.0.0.0> <ms-dns3 0.0.0.0> <ms-wins 0.0.0.0>]
Feb 28 20:18:01 fritz daemon.debug pppd[4695]: sent [IPCP TermAck id=0x5]
Feb 28 20:18:01 fritz daemon.debug pppd[4695]: rcvd [CCP ConfNak id=0x1 <mppe -H -M +S -L -D +C>]
Feb 28 20:18:01 fritz daemon.debug pppd[4695]: sent [CCP ConfReq id=0x2 <mppe -H -M +S -L -D +C>]
Feb 28 20:18:01 fritz daemon.debug pppd[4695]: rcvd [CCP ConfReq id=0x6 <mppe -H -M +S -L -D +C>]
Feb 28 20:18:01 fritz daemon.debug pppd[4695]: sent [CCP ConfAck id=0x6 <mppe -H -M +S -L -D +C>]
Feb 28 20:18:01 fritz daemon.debug pppd[4695]: rcvd [CCP ConfAck id=0x2 <mppe -H -M +S -L -D +C>]
Feb 28 20:18:01 fritz daemon.notice pppd[4695]: MPPC/MPPE 128-bit stateful compression enabled
Feb 28 20:18:01 fritz daemon.debug pppd[4695]: sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 192.168.178.1>]
Feb 28 20:18:01 fritz daemon.debug pppd[4695]: rcvd [IPCP ConfRej id=0x1 <compress VJ 0f 01>]
Feb 28 20:18:01 fritz daemon.debug pppd[4695]: sent [IPCP ConfReq id=0x2 <addr 192.168.178.1>]
Feb 28 20:18:01 fritz daemon.debug pppd[4695]: rcvd [IPCP ConfAck id=0x2 <addr 192.168.178.1>]
Feb 28 20:18:03 fritz daemon.debug pppd[4695]: rcvd [IPCP ConfReq id=0x7 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-wins 0.0.0.0> <ms-dns3 0.0.0.0> <ms-wins 0.0.0.0>]
Feb 28 20:18:03 fritz daemon.debug pppd[4695]: sent [IPCP ConfRej id=0x7 <ms-wins 0.0.0.0> <ms-wins 0.0.0.0>]
Feb 28 20:18:03 fritz daemon.debug pppd[4695]: rcvd [IPCP ConfReq id=0x8 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
Feb 28 20:18:03 fritz daemon.debug pppd[4695]: sent [IPCP ConfNak id=0x8 <addr 192.168.178.40> <ms-dns1 192.168.178.1> <ms-dns3 192.168.178.1>]
Feb 28 20:18:03 fritz daemon.debug pppd[4695]: rcvd [IPCP ConfReq id=0x9 <addr 192.168.178.40> <ms-dns1 192.168.178.1> <ms-dns3 192.168.178.1>]
Feb 28 20:18:03 fritz daemon.debug pppd[4695]: sent [IPCP ConfAck id=0x9 <addr 192.168.178.40> <ms-dns1 192.168.178.1> <ms-dns3 192.168.178.1>]
Feb 28 20:18:03 fritz daemon.info pppd[4695]: found interface lan for proxy arp
Feb 28 20:18:03 fritz daemon.notice pppd[4695]: local  IP address 192.168.178.1
Feb 28 20:18:03 fritz daemon.notice pppd[4695]: remote IP address 192.168.178.40
Feb 28 20:18:03 fritz daemon.debug pppd[4695]: Script /etc/ppp/ip-up started (pid 4697)
Feb 28 20:18:03 fritz daemon.debug pppd[4695]: Script /etc/ppp/ip-up finished (pid 4697), status = 0x0
Feb 28 20:18:12 fritz daemon.debug pppd[4695]: rcvd [LCP ProtRej id=0xa ca 00 00 00 18 f2 1d 00 00 da 4b 00 00 00 00 00 00 00 00 00 00 00 e0]
Feb 28 20:18:12 fritz daemon.warn pppd[4695]: Protocol-Reject for unsupported protocol 0xca00
Feb 28 20:18:14 fritz daemon.debug pppd[4695]: rcvd [LCP ProtRej id=0xb ba 00 00 00 6c 6e 6b 50 05 07 3a 35 00 00 00 00 00]
Feb 28 20:18:14 fritz daemon.warn pppd[4695]: Protocol-Reject for unsupported protocol 0xba00
Feb 28 20:18:17 fritz daemon.debug pppd[4695]: rcvd [LCP ProtRej id=0xc d2 c0 1a 00 b1 ca
    die Geladenen Module schauen bei mir dank dir gleich aus

    // Funktioniert jetzt zumindest per DSL
    sobald ich ein UMTS Stick verwende startet die box so im minuten tackt neu

    in der options.pptpd
    vor
    mppe stateless und nodeflate
    das # entfernen
    der rest der config ist ok
    funktioniert jetzt mit handy (Telexy symvpn und win xp)
    danke nochmal an cuma für seine hilfe
    Geändert von tiscali (01.03.2009 um 00:49 Uhr) Grund: Funktioniert jetzt
    AVM FRITZ!Box 7270
    Firmware:54.04.70 freetz-devel-3083
    Optionen: +busybox +enum +kernel (iln6) +avm-firewall-2.0.4_rc2 +dropbear-0.52 +pppd-2.4.4 +privoxy-3.0.10 +vsftpd-2.0.7 +haserl-0.9.25 +iptables-1.4.1.1 +modcgi-0.2 +ntfs-1.5130 +pptp-1.7.2 +pptpd-1.3.4
    Anbindung: Vodafone Mobile Connect Flat
    UMTS-Stick: K3520
    Zitieren Zitieren
Seite 23 von 23 ErsteErste ... 131920212223
« Vorheriges Thema | Nächstes Thema »

Ähnliche Themen

  1. FB 7270 PPTP server
    Von tiscali im Forum FRITZ!Box Fon: Modifikationen
    Antworten: 3
    Letzter Beitrag: 14.02.2009, 10:36
  2. VPN-Server mit PPTP auf V-Server und richtig Traffic routen.
    Von PsychoMantis im Forum Allgemeines
    Antworten: 3
    Letzter Beitrag: 22.10.2008, 01:34
  3. W501V und PPTP-Server
    Von fossy55 im Forum Speedport2Fritz
    Antworten: 0
    Letzter Beitrag: 29.09.2008, 19:58
  4. Problem bei Verbindung mit PPTP Server
    Von hansi1234 im Forum Freetz
    Antworten: 10
    Letzter Beitrag: 17.01.2008, 01:41
  5. PPTP Server auf FB laufen lassen
    Von Gast im Forum FRITZ!Box Fon: Modifikationen
    Antworten: 14
    Letzter Beitrag: 02.10.2006, 02:43

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  

Foren-Regeln