USB-Platte EXT3 mounted nicht 7270

CaptHowdy · 1 Dez 2009

Schönen guten Abend,

ich versuche jetzt schon über eine Woche meine Externe USB-Platte im Ext3 Format an der Fritzbox 7270 zu mounten.
Habe das Forum schon durchstöbert, aber leider nichts gefunden was mir weitergeholfen hat.
Habe das aktuellste Freetz 3989 installiert mit automount und ext3 ; Samba; Nfsd; usw..
Bekomme nur die Meldung das 0 von 1 Partition geladen wurde (unbekanntes Dateiformat).
Habt ihr noch ne idee wo ich nach Fehlern suchen kann bzw. welche Info's benötigt ihr ggf. noch um mir vielleicht bei der Fehleranalyse zu helfen.
Wäre echt spitze wenn ihr mir weiterhelfen könntet.

Gruß Captain

colonia27 · 1 Dez 2009

auszüge von z.B.

Code:

mount

und

Code:

cat /proc/partitions

wärn schonmal ein Anfang.
Dazu noch deine .config und evtl. diverse Logs (syslog,...)

CaptHowdy · 1 Dez 2009

Also hier mal ein paar infos
Mount:

Code:

/etc/init.d # mount
rootfs on / type rootfs (rw)
/dev/root on / type squashfs (ro)
dev on /dev type tmpfs (rw,nosuid)
proc on /proc type proc (rw,nosuid,nodev,noexec)
tmpfs on /var type tmpfs (rw)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec)
/dev/mtdblock5 on /data type jffs2 (rw)
usbfs on /proc/bus/usb type usbfs (rw)

cat /proc/partitions:

Code:

/etc/init.d # cat /proc/partitions
major minor  #blocks  name

  31     0      14992 mtdblock0
  31     1        751 mtdblock1
  31     2        128 mtdblock2
  31     3        256 mtdblock3
  31     4        256 mtdblock4
  31     5       3968 mtdblock5
   8     0  976762584 sda
   8     1  976762583 sda1

.config:

Code:

FREETZ_HAVE_DOT_CONFIG=y
FREETZ_AVM_VERSION_7270_04_76=y
FREETZ_TYPE_FON_WLAN_7270=y
FREETZ_TYPE_FON_WLAN_7270_16MB=y
FREETZ_AVM_VERSION_STRING="7270_04.76"
FREETZ_TYPE_LANG_DE=y
FREETZ_TYPE_LANG_STRING="de"
FREETZ_TYPE_STRING="7270"
FREETZ_INSTALL_BASE=y
FREETZ_REPLACE_BUSYBOX=y
FREETZ_REPLACE_KERNEL_AVAILABLE=y
FREETZ_REPLACE_KERNEL=y
FREETZ_SHOW_ADVANCED=y
FREETZ_TARGET_REF="8mb_26"
FREETZ_KERNEL_REF="8mb_26"
FREETZ_KERNEL_LAYOUT="ur8"
FREETZ_KERNEL_MTD_SIZE=246
FREETZ_HAS_PHONE=y
FREETZ_HAS_TAM=y
FREETZ_HAS_WLAN=y
FREETZ_HAS_USB_HOST=y
FREETZ_HAS_AVM_INETD=y
FREETZ_HAS_LIBSSL=y
FREETZ_LANG_DE=y
FREETZ_LANG_STRING="de"
FREETZ_PATCH_ENUM=y
FREETZ_PATCH_SIGNED=y
FREETZ_PATCH_USBSTORAGE=y
FREETZ_USBSTORAGE_AUTOMOUNT=y
FREETZ_AUTOMOUNT_EXT3=y
FREETZ_AUTORUN_AUTOEND=y
FREETZ_PACKAGE_CPMACCFG=y
FREETZ_PACKAGE_DROPBEAR=y
FREETZ_PACKAGE_DROPBEAR_DISABLE_HOST_LOOKUP=y
FREETZ_PACKAGE_SAMBA=y
FREETZ_PACKAGE_NMBD=y
FREETZ_PACKAGE_AUTHORIZED_KEYS=y
FREETZ_PACKAGE_AVM_FIREWALL=y
FREETZ_PACKAGE_CPMACCFG_CGI=y
FREETZ_PACKAGE_NFSD_CGI=y
FREETZ_PACKAGE_NHIPT=y
FREETZ_PACKAGE_IPTABLES=y
FREETZ_PACKAGE_IPTABLES_KERNEL_MODULES=y
FREETZ_MODULE_ip_conntrack=y
FREETZ_MODULE_ip_conntrack_ftp=y
FREETZ_MODULE_iptable_filter=y
FREETZ_MODULE_ip_tables=y
FREETZ_MODULE_ipt_iprange=y
FREETZ_MODULE_ipt_LOG=y
FREETZ_MODULE_ipt_REJECT=y
FREETZ_MODULE_x_tables=y
FREETZ_MODULE_xt_conntrack=y
FREETZ_MODULE_xt_multiport=y
FREETZ_MODULE_xt_state=y
FREETZ_MODULE_xt_tcpudp=y
FREETZ_PACKAGE_IPTABLES_SHARED_LIBS=y
FREETZ_LIB_libipt_icmp=y
FREETZ_LIB_libipt_LOG=y
FREETZ_LIB_libipt_REJECT=y
FREETZ_LIB_libxt_conntrack=y
FREETZ_LIB_libxt_iprange=y
FREETZ_LIB_libxt_multiport=y
FREETZ_LIB_libxt_state=y
FREETZ_LIB_libxt_tcp=y
FREETZ_LIB_libxt_udp=y
FREETZ_PACKAGE_SPINDOWN_CGI=y
FREETZ_PACKAGE_SG3UTILS=y
FREETZ_PACKAGE_SYSLOGD_CGI=y
FREETZ_PACKAGE_STRACE=y
FREETZ_PACKAGE_USBUTILS=y
FREETZ_PACKAGE_USBUTILS_IDS=y
FREETZ_PACKAGE_E2FSPROGS=y
FREETZ_PACKAGE_E2FSPROGS_STATIC=y
FREETZ_PACKAGE_E2FSPROGS_E2FSCK=y
FREETZ_PACKAGE_E2FSPROGS_E2MAKING=y
FREETZ_PACKAGE_E2FSPROGS_E2TUNING=y
FREETZ_PACKAGE_FSTYP=y
FREETZ_PACKAGE_NFS_UTILS=y
FREETZ_PACKAGE_PORTMAP=y
FREETZ_PACKAGE_TCP_WRAPPERS=y
FREETZ_PACKAGE_TRANSMISSION=y
FREETZ_PACKAGE_TRANSMISSION_CLIENT=y
FREETZ_PACKAGE_TRANSMISSION_DAEMON=y
FREETZ_PACKAGE_USBROOT=y
FREETZ_PACKAGE_USBROOT_E2FSCK=y
FREETZ_PACKAGE_VIM=y
FREETZ_PACKAGE_HASERL=y
FREETZ_PACKAGE_MODCGI=y
FREETZ_DL_SITE="ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7270/firmware/deutsch"
FREETZ_DL_SOURCE="FRITZ.Box_Fon_WLAN_7270.54.04.76.image"
FREETZ_MOD_DL_NUM_SITES="5"
FREETZ_MOD_DL_SITE_1="http://freetz.3dfxatwork.de"
FREETZ_MOD_DL_SITE_2="http://freetz.wirsind.info"
FREETZ_MOD_DL_SITE_3="http://freetz.magenbrot.net"
FREETZ_MOD_DL_SITE_4=""
FREETZ_MOD_DL_SITE_5=""
FREETZ_SECURITY_LEVEL=0
FREETZ_VERBOSITY_LEVEL=2
FREETZ_FAVICON_NONE=y
FREETZ_FAVICON_STRING="none"
FREETZ_SUBVERSION_STRING=y
FREETZ_DEVELOPER_VERSION_STRING=y
FREETZ_STYLE_COLORED=y
FREETZ_STYLE="colored"
FREETZ_USER_DEFINED_COMMENT=""
FREETZ_AVMPLUGINS_ENABLED=y
FREETZ_AVMPLUGINS_MEDIASRV=y
FREETZ_AVMPLUGINS_MINI=y
FREETZ_AVMPLUGINS_NTFS=y
FREETZ_AVMPLUGINS_ONLINEPB=y
FREETZ_AVMPLUGINS_SAMBA=y
FREETZ_AVMPLUGINS_TAM=y
FREETZ_AVMPLUGINS_WEBDAV=y
FREETZ_SQUASHFS_BLOCKSIZE_65536=y
FREETZ_BUSYBOX_INETD=y
FREETZ_BUSYBOX_START_STOP_DAEMON=y
FREETZ_BUSYBOX_WGET=y
FREETZ_BUSYBOX_NICE=y
FREETZ_MODULE_ext3=y
FREETZ_MODULE_fuse=y
FREETZ_MODULE_jbd=y
FREETZ_MODULE_lockd=y
FREETZ_MODULE_mini_fo=y
FREETZ_MODULE_nfsd=y
FREETZ_MODULE_exportfs=y
FREETZ_MODULE_nls_cp437=y
FREETZ_MODULE_nls_iso8859_1=y
FREETZ_MODULE_mbcache=y
FREETZ_MODULE_sunrpc=y
FREETZ_LIB_libcrypto=y
FREETZ_LIB_libssl=y
FREETZ_LIB_libz=y
FREETZ_LIB_libfreetype=y
FREETZ_LIB_libart_lgpl_2=y
FREETZ_LIB_libpng12=y
FREETZ_LIB_ld_uClibc=y
FREETZ_LIB_libcrypt=y
FREETZ_LIB_libdl=y
FREETZ_LIB_libm=y
FREETZ_LIB_libnsl=y
FREETZ_LIB_libpthread=y
FREETZ_LIB_libresolv=y
FREETZ_LIB_librt=y
FREETZ_LIB_libuClibc=y
FREETZ_LIB_libutil=y
FREETZ_LIB_libgcc_s=y
FREETZ_LIB_libglib_1=y
FREETZ_LIB_libncurses=y
FREETZ_SHARE_terminfo=y
FREETZ_SHARE_terminfo_ansi=y
FREETZ_SHARE_terminfo_gnome=y
FREETZ_SHARE_terminfo_konsole=y
FREETZ_SHARE_terminfo_linux=y
FREETZ_SHARE_terminfo_putty=y
FREETZ_SHARE_terminfo_rxvt=y
FREETZ_SHARE_terminfo_screen=y
FREETZ_SHARE_terminfo_screenMINUSw=y
FREETZ_SHARE_terminfo_sun=y
FREETZ_SHARE_terminfo_vt100=y
FREETZ_SHARE_terminfo_vt102=y
FREETZ_SHARE_terminfo_vt102MINUSnsgr=y
FREETZ_SHARE_terminfo_vt102MINUSw=y
FREETZ_SHARE_terminfo_vt200=y
FREETZ_SHARE_terminfo_vt220=y
FREETZ_SHARE_terminfo_vt52=y
FREETZ_SHARE_terminfo_xterm=y
FREETZ_SHARE_terminfo_xtermMINUScolor=y
FREETZ_SHARE_terminfo_xtermMINUSxfree86=y
FREETZ_LIB_libcurl=y
FREETZ_LIB_libevent=y
FREETZ_LIB_libpcap=y
FREETZ_LIB_libusb=y
FREETZ_LIB_libfreetz=y
FREETZ_DOWNLOAD_TOOLCHAIN=y
FREETZ_TARGET_CROSS="mipsel-linux-uclibc-"
FREETZ_TARGET_MAKE_PATH="toolchain/target/bin"
FREETZ_TARGET_CFLAGS="-Os -pipe -march=4kc -Wa,--trap"
FREETZ_JLEVEL=2
FREETZ_KERNEL_CROSS="mipsel-unknown-linux-gnu-"
FREETZ_KERNEL_MAKE_PATH="toolchain/kernel/bin"
FREETZ_KERNEL_VERSION_2_6_19_2=y
FREETZ_KERNEL_VERSION="2.6.19.2"
FREETZ_TARGET_UCLIBC_VERSION_0_9_29=y
FREETZ_TARGET_COMPILER_GCC_4_2_4_UCLIBC_0_9_29=y
FREETZ_TARGET_GCC_VERSION="4.2.4"
FREETZ_TARGET_UCLIBC_VERSION="0.9.29"
FREETZ_TARGET_BINUTILS_VERSION="2.18"
FREETZ_TARGET_UCLIBC_REF="mod"
FREETZ_TARGET_GXX=y
FREETZ_TARGET_CCACHE=y
FREETZ_TARGET_LFS=y
FREETZ_KERNEL_GCC_VERSION="3.4.6"
FREETZ_KERNEL_BINUTILS_VERSION="2.17.50.0.17"

syslog:

Code:

Jan  1 01:01:05 fritz user.warn kernel: [ur8_mtd_init] flashsize = 0x01000000 Byte 16 MBytes
Jan  1 01:01:05 fritz user.warn kernel: [ur8_mtd_init] mtd[0] = 0x90000000,0x90000000
Jan  1 01:01:05 fritz user.warn kernel: [ur8_mtd_init] mtd[1] = 0x90020000,0x90F80000
Jan  1 01:01:05 fritz user.warn kernel: [ur8_mtd_init] mtd[2] = 0x90000000,0x90020000
Jan  1 01:01:05 fritz user.warn kernel: [ur8_mtd_init] mtd[3] = 0x90F80000,0x90FC0000
Jan  1 01:01:05 fritz user.warn kernel: [ur8_mtd_init] mtd[4] = 0x90FC0000,0x91000000
Jan  1 01:01:05 fritz user.warn kernel: [ur8_mtd_init] mtd[5] = 0x90000000,0x90000000
Jan  1 01:01:05 fritz user.err kernel: pcibios_read_config: accessing present PCI slot : 14, where 0, size 4
Jan  1 01:01:05 fritz user.err kernel: Master and Slave Enabled
Jan  1 01:01:05 fritz user.info kernel: pktsched: using high resolution timer
Jan  1 01:01:05 fritz user.info kernel: NET: Registered protocol family 2
Jan  1 01:01:05 fritz user.warn kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan  1 01:01:05 fritz user.warn kernel: TCP established hash table entries: 16384 (order: 4, 65536 bytes)
Jan  1 01:01:05 fritz user.warn kernel: TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
Jan  1 01:01:05 fritz user.info kernel: TCP: Hash tables configured (established 16384 bind 8192)
Jan  1 01:01:05 fritz user.info kernel: TCP reno registered
Jan  1 01:01:05 fritz user.info kernel: squashfs: version 3.2 (2007/01/02) Phillip Lougher
Jan  1 01:01:05 fritz user.info kernel: io scheduler noop registered (default)
Jan  1 01:01:05 fritz user.info kernel: avm_net_trace: Up and running.
Jan  1 01:01:05 fritz user.warn kernel: [avm] configured: watchdog event debug enable dir
Jan  1 01:01:05 fritz user.info kernel: ect gpio 
Jan  1 01:01:05 fritz user.warn kernel: 
Jan  1 01:01:05 fritz user.warn kernel: AVM_WATCHDOG: Watchdog Driver for AR7 Hardware (Version 1.0, build: Nov 15 2009 17:20:20)
Jan  1 01:01:05 fritz user.info kernel: Serial: 8250/16550 driver $Revision: 1.3 $ 1 ports, IRQ sharing disabled
Jan  1 01:01:05 fritz user.info kernel: serial8250: ttyS0 at MMIO 0x0 (irq = 15) is a UR8_UART
Jan  1 01:01:05 fritz user.err kernel: [cpmac] Version: URL: svn://EmbeddedVM/home/SVN/drivers/cpmac/tags/1.110-r820-trunk-VLAN-Fix_ADM_und_Tantos  -  Revision 538:821  -  Di 23. Jun 16:20:50 CEST 2009
Jan  1 01:01:05 fritz user.err kernel: [cpmac] [cpmac_if_register] dev cpmac0 (phy_id 0) registered
Jan  1 01:01:05 fritz user.info kernel: tun: Universal TUN/TAP device driver, 1.6
Jan  1 01:01:05 fritz user.info kernel: tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
Jan  1 01:01:05 fritz user.notice kernel: physmap platform flash device: 01000001 at 10000000
Jan  1 01:01:05 fritz user.info kernel: physmap-flash.1: Found 1 x16 devices at 0x0 in 16-bit bank
Jan  1 01:01:05 fritz user.warn kernel:  Amd/Fujitsu Extended Query Table at 0x0040
Jan  1 01:01:05 fritz user.warn kernel: physmap-flash.1: CFI does not contain boot bank location. Assuming top.
Jan  1 01:01:05 fritz user.notice kernel: number of CFI chips: 1
Jan  1 01:01:05 fritz user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Jan  1 01:01:05 fritz user.notice kernel: RedBoot partition parsing not available
Jan  1 01:01:05 fritz user.warn kernel: [ur8_jffs2_parser_function] mtd_info->name physmap-flash.1 mtd_info->index 0 param=0 p_mtd_pat=0x943f1a3c
Jan  1 01:01:05 fritz user.warn kernel: [ur8_jffs2_parser_function] try partition kernel (offset 0x20000 len 16121856)
Jan  1 01:01:05 fritz user.warn kernel: [ur8_squashfs_parser_function] mtd_info->name physmap-flash.1 mtd_info->index 0 param=0 p_mtd_pat=0x943f1a3c
Jan  1 01:01:05 fritz user.warn kernel: [ur8_squashfs_parser_function] *p_mtd_pat->name filesystem
Jan  1 01:01:05 fritz user.warn kernel: [ur8_squashfs_parser_function] try partition kernel (offset 0x20000 len 16121856 blocksize=20000)
Jan  1 01:01:05 fritz user.warn kernel: [ur8_squashfs_parser_function] magic found @pos 0xdbe00
Jan  1 01:01:05 fritz user.warn kernel: [ur8_squashfs_parser_function] flashsize=1000000
Jan  1 01:01:05 fritz user.warn kernel: [ur8_squashfs_parser_function] jffs2_start@ba0000 size: 62
Jan  1 01:01:05 fritz user.notice kernel: 6 find_squashfs partitions found on MTD device physmap-flash.1
Jan  1 01:01:05 fritz user.notice kernel: Creating 6 MTD partitions on "physmap-flash.1":
Jan  1 01:01:05 fritz user.notice kernel: 0x000dbe00-0x00f80000 : "rootfs"
Jan  1 01:01:05 fritz user.warn kernel: mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
Jan  1 01:01:05 fritz user.warn kernel: [ur8_mtd_add_notifier] name rootfs
Jan  1 01:01:05 fritz user.warn kernel: [ur8_mtd_add_notifier] use rootfs
Jan  1 01:01:05 fritz user.warn kernel: [ur8_mtd_add_notifier] root device: /dev/mtdblock0 (rootfs)
Jan  1 01:01:05 fritz user.notice kernel: 0x00020000-0x000dbe00 : "kernel"
Jan  1 01:01:05 fritz user.warn kernel: mtd: partition "kernel" doesn't end on an erase block -- force read-only
Jan  1 01:01:05 fritz user.warn kernel: [ur8_mtd_add_notifier] name kernel
Jan  1 01:01:05 fritz user.warn kernel: [ur8_mtd_add_notifier] skip kernel
Jan  1 01:01:05 fritz user.notice kernel: 0x00000000-0x00020000 : "urlader"
Jan  1 01:01:05 fritz user.warn kernel: [ur8_mtd_add_notifier] name urlader
Jan  1 01:01:05 fritz user.warn kernel: [ur8_mtd_add_notifier] skip urlader
Jan  1 01:01:05 fritz user.notice kernel: 0x00f80000-0x00fc0000 : "tffs (1)"
Jan  1 01:01:05 fritz user.warn kernel: [ur8_mtd_add_notifier] name tffs (1)
Jan  1 01:01:05 fritz user.warn kernel: [ur8_mtd_add_notifier] skip tffs (1)
Jan  1 01:01:05 fritz user.notice kernel: 0x00fc0000-0x01000000 : "tffs (2)"
Jan  1 01:01:05 fritz user.warn kernel: [ur8_mtd_add_notifier] name tffs (2)
Jan  1 01:01:05 fritz user.warn kernel: [ur8_mtd_add_notifier] skip tffs (2)
Jan  1 01:01:05 fritz user.notice kernel: 0x00ba0000-0x00f80000 : "jffs2"
Jan  1 01:01:05 fritz user.warn kernel: [ur8_mtd_add_notifier] name jffs2
Jan  1 01:01:05 fritz user.warn kernel: [ur8_mtd_add_notifier] skip jffs2
Jan  1 01:01:05 fritz user.warn kernel: Generic platform RAM MTD, (c) 2004 Simtec Electronics
Jan  1 01:01:05 fritz user.err kernel: mtd-ram mtd-ram.2: no memory resource specified
Jan  1 01:01:05 fritz user.err kernel: [ur8_ram_mtd_set_rw] PLATRAM_RO
Jan  1 01:01:05 fritz user.warn kernel: mtd-ram: probe of mtd-ram.2 failed with error -2
Jan  1 01:01:05 fritz user.notice kernel: CAPI Subsystem Rev 1.1.2.8
Jan  1 01:01:05 fritz user.info kernel: TCP cubic registered
Jan  1 01:01:05 fritz user.info kernel: mcfw: IGMPv3 fast forwarding
Jan  1 01:01:05 fritz user.info kernel: NET: Registered protocol family 1
Jan  1 01:01:05 fritz user.info kernel: NET: Registered protocol family 17
Jan  1 01:01:05 fritz user.info kernel: NET: Registered protocol family 8
Jan  1 01:01:05 fritz user.info kernel: NET: Registered protocol family 20
Jan  1 01:01:05 fritz user.warn kernel: MUSB UR8 pdev active!
Jan  1 01:01:05 fritz user.err kernel: PCI_STATUS_SET: 40000
Jan  1 01:01:05 fritz user.err kernel: PCI_STATUS_CLR: 40000
Jan  1 01:01:05 fritz user.err kernel: PCI_HOST_INT_EN: 0
Jan  1 01:01:05 fritz user.err kernel: PCI_HOST_INT_CLR: 0
Jan  1 01:01:05 fritz user.err kernel: PCI_BE_INT_En: 0
Jan  1 01:01:05 fritz user.err kernel: PCI_BE_INT_CLR: 0
Jan  1 01:01:05 fritz user.err kernel: [pci_int_init] done
Jan  1 01:01:05 fritz user.info kernel: Time: MIPS clocksource has been installed.
Jan  1 01:01:05 fritz user.warn kernel: TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 2.0)
Jan  1 01:01:05 fritz user.warn kernel:       mount on mtd3 and mtd4 (double buffering)
Jan  1 01:01:05 fritz user.info kernel: Adam2 environment variables API installed.
Jan  1 01:01:05 fritz user.info kernel: [avm_new] push_button_gpio=25 value=0 enabled
Jan  1 01:01:05 fritz user.warn kernel: VFS: Mounted root (squashfs filesystem) readonly.
Jan  1 01:01:05 fritz user.warn kernel: Freeing prom memory: 0kb freed
Jan  1 01:01:05 fritz user.info kernel: Freeing unused kernel memory: 132k freed
Jan  1 01:01:05 fritz user.warn kernel: AVM_WATCHDOG: System Init UEberwachung 240 Sekunden
Jan  1 01:01:05 fritz user.warn kernel: TFFS Name Table F
Jan  1 01:01:05 fritz user.warn kernel: led_modul_Fritz_Box_7270: module license '
Jan  1 01:01:05 fritz user.warn kernel: (C) Copyright 2008 by AVM
Jan  1 01:01:05 fritz user.warn kernel: ' taintskernel.
Jan  1 01:01:05 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 1 name power
Jan  1 01:01:05 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 9 name internet
Jan  1 01:01:05 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 27 name festnetz
Jan  1 01:01:05 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 28 name wlan
Jan  1 01:01:05 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 17 name dual1
Jan  1 01:01:05 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 35 name d
Jan  1 01:01:05 fritz user.info kernel: ual2
Jan  1 01:01:05 fritz user.err kernel: [BUTTON] no buttons defined - disable new button controls
Jan  1 01:01:05 fritz user.err kernel: [LED] "wyatt_earp_turn_off_leds" (0x00000000) not loaded
Jan  1 01:01:05 fritz user.info kernel: [avm_new]push_button_ctrl: gpio=23 value=1 enabled
Jan  1 01:01:05 fritz user.info kernel: [avm_new]push_button_ctrl:'Taster_4': enable=2 gpio=23 regaddr=00000000 button_type=0
Jan  1 01:01:05 fritz user.info kernel: [avm_new]push_button 'Taster_4', released: GPIO=23 presses=0 key=button_key_10
Jan  1 01:01:05 fritz user.warn kernel: patch_dectfw: patch_adress: 7094 max_len: 22 with Version 2 Len: 16
Jan  1 01:01:05 fritz user.warn kernel: patch_dectfw: c009b000, datalen = 32159, 
Jan  1 01:01:05 fritz user.warn kernel: 
Jan  1 01:01:05 fritz user.warn kernel: **************************************************************
Jan  1 01:01:05 fritz user.warn kernel: dect_file_process: upload of '/lib/modules/dectfw_secondlevel.hex' successfull
Jan  1 01:01:05 fritz user.err kernel: [piglet]bitfile '/lib/modules/microvoip_isdn_top.bit'
Jan  1 01:01:05 fritz user.err kernel: [piglet] Read 169291 bytes total from file
Jan  1 01:01:05 fritz user.warn kernel: [piglet]TDM: FS: 7995 Hz CLK:2047800 Hz
Jan  1 01:01:05 fritz user.info kernel: JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
Jan  1 01:01:05 fritz user.warn kernel: 
Jan  1 01:01:05 fritz user.warn kernel: [avm_debug]redirect kernel-messages (/dev/debug)
Jan  1 01:01:05 fritz daemon.info chronyd[1433]: chronyd version 1.23 starting
Jan  1 01:01:05 fritz daemon.info chronyd[1433]: Initial txc.tick=10000 txc.freq=0 (0.00000000) txc.offset=0 => hz=100 shift_hz=7
Jan  1 01:01:05 fritz daemon.info chronyd[1433]: set_config_hz=0 hz=100 shift_hz=7 basic_freq_scale=1.28000000 nominal_tick=10000 slew_delta_tick=833 max_tick_bias=1000
Jan  1 01:01:05 fritz daemon.info chronyd[1433]: Linux kernel major=2 minor=6 patch=19
Jan  1 01:01:05 fritz daemon.info chronyd[1433]: calculated_freq_scale=0.99902439 freq_scale=0.99902439
Jan  1 01:01:06 fritz daemon.info chronyd[1433]: System's initial offset : 313010023.240285 seconds slow of true (step)
Dec  1 20:14:50 fritz user.err ctlmgr[523]: 2009-12-01 20:14:50(1) [Segmentation fault] ctlmgr(523) CRASHED at md5_block_data_order+0x48 (/usr/lib/libcrypto.so.0.9.8 at 000353cc) accessing _gp+0x29a14871 (/lib/libtiinterpreter.so at 29a3eb41)
Dec  1 20:14:50 fritz user.err ctlmgr[523]: ze: 00000000 at: 1000ce01 v0: ffffffff v1: 00ac53b3
Dec  1 20:14:50 fritz user.err ctlmgr[523]: a0: 2b1cfd0c a1: 54d43b40 a2: 00ac53b4 a3: 1cb1a328
Dec  1 20:14:50 fritz user.err ctlmgr[523]: t0: 25bd88b4 t1: bcb76cf5 t2: ddfbd284 t3: 00004f5c
Dec  1 20:14:50 fritz user.err ctlmgr[523]: t4: 00000012 t5: 0019902b t6: 0000032d t7: 00002b5c
Dec  1 20:14:50 fritz user.err ctlmgr[523]: s0: 00ac53b4 s1: 2b14ed1d s2: 2b1cfd0c s3: 2b1cfd24
Dec  1 20:14:50 fritz user.err ctlmgr[523]: s4: 54d43b40 s5: 00000030 s6: 2b32812c s7: 00000030
Dec  1 20:14:50 fritz user.err ctlmgr[523]: t8: 00000031 t9: 2b101384 k0: 00000182 k1: 00000000
Dec  1 20:14:50 fritz user.err ctlmgr[523]: gp: 2b1e42b0 sp: 7fe92500 fp: 54d43b40 ra: 2b102588
Dec  1 20:14:50 fritz user.err telefon[1174]: set initial telefon time from linux time to 20:14 1.12 2009!
Dec  1 20:14:51 fritz authpriv.info dropbear[1577]: Running in background
Dec  1 20:14:51 fritz daemon.warn chronyd[1433]: Could not send to 86.59.13.46 : Bad file descriptor
Dec  1 20:14:51 fritz daemon.warn chronyd[1433]: Could not send to 212.13.195.3 : Bad file descriptor
Dec  1 20:14:52 fritz daemon.warn chronyd[1433]: Could not send to 86.59.13.46 : Bad file descriptor
Dec  1 20:14:52 fritz daemon.warn chronyd[1433]: Could not send to 212.13.195.3 : Bad file descriptor
Dec  1 20:14:53 fritz daemon.warn chronyd[1433]: Could not send to 86.59.13.46 : Bad file descriptor
Dec  1 20:14:53 fritz daemon.warn chronyd[1433]: Could not send to 212.13.195.3 : Bad file descriptor
Dec  1 20:15:15 fritz daemon.info hostapd: ath0: STA 00:1c:f0:5b:d5:a2 IEEE 802.11: associated
Dec  1 20:15:15 fritz daemon.info hostapd: ath0: STA 00:1c:f0:5b:d5:a2 WPA: pairwise key handshake completed (RSN)
Dec  1 20:15:20 fritz daemon.info hostapd: ath0: STA 00:0f:b5:99:7d:12 IEEE 802.11: associated
Dec  1 20:15:20 fritz daemon.info hostapd: ath0: STA 00:0f:b5:99:7d:12 WPA: pairwise key handshake completed (RSN)
Dec  1 20:15:48 fritz daemon.info chronyd[1433]: Trimming RTC, error = -1259698456.370 seconds
Dec  1 20:20:40 fritz user.err telefon[1174]: '/var/calllog' script not found!
Dec  1 20:20:40 fritz user.err telefon[1174]: SIGCHLD received!
Dec  1 20:23:39 fritz user.err telefon[1174]: SIGCHLD received!
Dec  1 20:24:59 fritz daemon.info hostapd: ath0: STA 00:1c:f0:5b:d5:a2 WPA: group key handshake completed (RSN)
Dec  1 20:24:59 fritz daemon.info hostapd: ath0: STA 00:0f:b5:99:7d:12 WPA: group key handshake completed (RSN)
Dec  1 20:34:59 fritz daemon.info hostapd: ath0: STA 00:1c:f0:5b:d5:a2 WPA: group key handshake completed (RSN)
Dec  1 20:34:59 fritz daemon.info hostapd: ath0: STA 00:0f:b5:99:7d:12 WPA: group key handshake completed (RSN)
Dec  1 20:44:39 fritz authpriv.info dropbear[3496]: Child connection from 192.168.10.23:51334
Dec  1 20:44:44 fritz authpriv.warn dropbear[3496]: bad password attempt for 'root' from 192.168.10.23:51334
Dec  1 20:44:52 fritz authpriv.warn dropbear[3496]: bad password attempt for 'root' from 192.168.10.23:51334
Dec  1 20:44:52 fritz authpriv.info dropbear[3496]: exit before auth (user 'root', 2 fails): Max auth tries reached - user 'root' from 192.168.10.23:51334
Dec  1 20:44:56 fritz authpriv.info dropbear[3497]: Child connection from 192.168.10.23:51335
Dec  1 20:44:59 fritz daemon.info hostapd: ath0: STA 00:1c:f0:5b:d5:a2 WPA: group key handshake completed (RSN)
Dec  1 20:44:59 fritz daemon.info hostapd: ath0: STA 00:0f:b5:99:7d:12 WPA: group key handshake completed (RSN)
Dec  1 20:44:59 fritz authpriv.notice dropbear[3497]: password auth succeeded for 'root' from 192.168.10.23:51335
Dec  1 20:54:59 fritz daemon.info hostapd: ath0: STA 00:1c:f0:5b:d5:a2 WPA: group key handshake completed (RSN)
Dec  1 20:54:59 fritz daemon.info hostapd: ath0: STA 00:0f:b5:99:7d:12 WPA: group key handshake completed (RSN)
Dec  1 21:04:59 fritz daemon.info hostapd: ath0: STA 00:1c:f0:5b:d5:a2 WPA: group key handshake completed (RSN)
Dec  1 21:04:59 fritz daemon.info hostapd: ath0: STA 00:0f:b5:99:7d:12 WPA: group key handshake completed (RSN)
Dec  1 21:14:59 fritz daemon.info hostapd: ath0: STA 00:1c:f0:5b:d5:a2 WPA: group key handshake completed (RSN)
Dec  1 21:14:59 fritz daemon.info hostapd: ath0: STA 00:0f:b5:99:7d:12 WPA: group key handshake completed (RSN)
Dec  1 21:24:59 fritz daemon.info hostapd: ath0: STA 00:0f:b5:99:7d:12 WPA: group key handshake completed (RSN)
Dec  1 21:24:59 fritz daemon.info hostapd: ath0: STA 00:1c:f0:5b:d5:a2 WPA: group key handshake completed (RSN)
Dec  1 21:34:59 fritz daemon.info hostapd: ath0: STA 00:0f:b5:99:7d:12 WPA: group key handshake completed (RSN)
Dec  1 21:34:59 fritz daemon.info hostapd: ath0: STA 00:1c:f0:5b:d5:a2 WPA: group key handshake completed (RSN)

/var/log/mod.log:

Code:

rc.mod version freetz-devel-3989
crond is disabled
telnetd is disabled
Starting Freetz webinterface...done.
Starting syslogd...done.
chmod: /tmp/flash/nhiptboot.cfg: No such file or directory
/etc/init.d/rc.nhipt: .: line 108: can't open /tmp/flash/nhiptboot.cfg
Disk spindown is disabled
nfsd is disabled
Starting dropbear SSH server...done.
samba is disabled
Setting up SSH authorized_keys for root ...initialized.
Starting AVM-Plugins...mediasrv(failed)...mini(failed)...ntfs...onlinepb...samba...tam...webdav...done.
swap is disabled

olistudent · 1 Dez 2009

Hi.
Ich weiß nicht, ob es damit zusammenhängt, aber dein ctlmgr stürtzt ab, weil du die libcrypto/libssl getauscht hast. Nutz mal bitte die Suchfunktion und schau dich im Trac-Wiki dazu um. Wenn du das behoben hast, dann sehen wir weiter...

MfG Oliver

CaptHowdy · 2 Dez 2009

das Lag wohl an Transmission habs wohl ausversehen angekreuzt.
So habe jetzt neues Image erstellt mit automount ext2 ext3 ...

noch mal die log daten aktualisiert.
Fritzbox meldet:

Code:

02.12.09 13:07:40 Der USB-Speicher 2 enthält kein unterstütztes Dateisystem oder hat eine ungültige Partitionstabelle. (Das Gerät hat den folgenden Typ: 0930:0b09)

02.12.09 13:07:40 Der USB-Speicher uStor01 enthält kein unterstütztes Dateisystem oder hat eine ungültige Partitionstabelle. (Das Gerät hat den folgenden Typ: NOTMOUNTABLE)

02.12.09 13:07:29 USB-Gerät 002, Klasse 'USB 2.0 (hi-speed) storage', angesteckt

mount:

Code:

/var/mod/root # mount
rootfs on / type rootfs (rw)
/dev/root on / type squashfs (ro)
dev on /dev type tmpfs (rw,nosuid)
proc on /proc type proc (rw,nosuid,nodev,noexec)
tmpfs on /var type tmpfs (rw)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec)
/dev/mtdblock5 on /data type jffs2 (rw)
usbfs on /proc/bus/usb type usbfs (rw)

cat /proc/partitions:

Code:

/var/mod/root # cat /proc/partitions
major minor  #blocks  name

  31     0      14992 mtdblock0
  31     1        751 mtdblock1
  31     2        128 mtdblock2
  31     3        256 mtdblock3
  31     4        256 mtdblock4
  31     5       3968 mtdblock5
   8     0  976762584 sda
   8     1  976762583 sda1

.config:

Code:

FREETZ_HAVE_DOT_CONFIG=y
FREETZ_AVM_VERSION_7270_04_76=y
FREETZ_TYPE_FON_WLAN_7270=y
FREETZ_TYPE_FON_WLAN_7270_16MB=y
FREETZ_AVM_VERSION_STRING="7270_04.76"
FREETZ_TYPE_LANG_DE=y
FREETZ_TYPE_LANG_STRING="de"
FREETZ_TYPE_STRING="7270"
FREETZ_INSTALL_BASE=y
FREETZ_REPLACE_BUSYBOX=y
FREETZ_REPLACE_KERNEL_AVAILABLE=y
FREETZ_REPLACE_KERNEL=y
FREETZ_SHOW_ADVANCED=y
FREETZ_TARGET_REF="8mb_26"
FREETZ_KERNEL_REF="8mb_26"
FREETZ_KERNEL_LAYOUT="ur8"
FREETZ_KERNEL_MTD_SIZE=246
FREETZ_HAS_PHONE=y
FREETZ_HAS_TAM=y
FREETZ_HAS_WLAN=y
FREETZ_HAS_USB_HOST=y
FREETZ_HAS_AVM_INETD=y
FREETZ_HAS_LIBSSL=y
FREETZ_LANG_DE=y
FREETZ_LANG_STRING="de"
FREETZ_PATCH_USBSTORAGE=y
FREETZ_USBSTORAGE_AUTOMOUNT=y
FREETZ_AUTOMOUNT_EXT2=y
FREETZ_AUTOMOUNT_EXT3=y
FREETZ_AUTORUN_AUTOEND=y
FREETZ_PACKAGE_CPMACCFG=y
FREETZ_PACKAGE_DNSMASQ=y
FREETZ_PACKAGE_DROPBEAR=y
FREETZ_PACKAGE_DROPBEAR_DISABLE_HOST_LOOKUP=y
FREETZ_PACKAGE_MINI_FO=y
FREETZ_PACKAGE_SAMBA=y
FREETZ_PACKAGE_NMBD=y
FREETZ_PACKAGE_TCPDUMP=y
FREETZ_PACKAGE_AUTHORIZED_KEYS=y
FREETZ_PACKAGE_AVM_FIREWALL=y
FREETZ_PACKAGE_CPMACCFG_CGI=y
FREETZ_PACKAGE_NFSD_CGI=y
FREETZ_PACKAGE_NHIPT=y
FREETZ_PACKAGE_IPTABLES=y
FREETZ_PACKAGE_IPTABLES_KERNEL_MODULES=y
FREETZ_MODULE_ip_conntrack=y
FREETZ_MODULE_ip_conntrack_ftp=y
FREETZ_MODULE_iptable_filter=y
FREETZ_MODULE_ip_tables=y
FREETZ_MODULE_ipt_iprange=y
FREETZ_MODULE_ipt_LOG=y
FREETZ_MODULE_ipt_REJECT=y
FREETZ_MODULE_x_tables=y
FREETZ_MODULE_xt_conntrack=y
FREETZ_MODULE_xt_multiport=y
FREETZ_MODULE_xt_state=y
FREETZ_MODULE_xt_tcpudp=y
FREETZ_PACKAGE_IPTABLES_SHARED_LIBS=y
FREETZ_LIB_libipt_icmp=y
FREETZ_LIB_libipt_LOG=y
FREETZ_LIB_libipt_REJECT=y
FREETZ_LIB_libxt_conntrack=y
FREETZ_LIB_libxt_iprange=y
FREETZ_LIB_libxt_multiport=y
FREETZ_LIB_libxt_state=y
FREETZ_LIB_libxt_tcp=y
FREETZ_LIB_libxt_udp=y
FREETZ_PACKAGE_ONLINECHANGED_CGI=y
FREETZ_PACKAGE_RRDSTATS=y
FREETZ_PACKAGE_SPINDOWN_CGI=y
FREETZ_PACKAGE_SG3UTILS=y
FREETZ_PACKAGE_SYSLOGD_CGI=y
FREETZ_PACKAGE_LTRACE=y
FREETZ_PACKAGE_STRACE=y
FREETZ_PACKAGE_FSTYP=y
FREETZ_PACKAGE_INADYN_MT=y
FREETZ_PACKAGE_IPTRAF=y
FREETZ_PACKAGE_NFS_UTILS=y
FREETZ_PACKAGE_PORTMAP=y
FREETZ_PACKAGE_RRDTOOL=y
FREETZ_PACKAGE_TCP_WRAPPERS=y
FREETZ_PACKAGE_HASERL=y
FREETZ_PACKAGE_MODCGI=y
FREETZ_DL_SITE="ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7270/firmware/deutsch"
FREETZ_DL_SOURCE="FRITZ.Box_Fon_WLAN_7270.54.04.76.image"
FREETZ_MOD_DL_NUM_SITES="5"
FREETZ_MOD_DL_SITE_1="http://freetz.3dfxatwork.de"
FREETZ_MOD_DL_SITE_2="http://freetz.wirsind.info"
FREETZ_MOD_DL_SITE_3="http://freetz.magenbrot.net"
FREETZ_MOD_DL_SITE_4=""
FREETZ_MOD_DL_SITE_5=""
FREETZ_SECURITY_LEVEL=1
FREETZ_VERBOSITY_LEVEL=2
FREETZ_FAVICON_NONE=y
FREETZ_FAVICON_STRING="none"
FREETZ_SUBVERSION_STRING=y
FREETZ_DEVELOPER_VERSION_STRING=y
FREETZ_STYLE_COLORED=y
FREETZ_STYLE="colored"
FREETZ_USER_DEFINED_COMMENT=""
FREETZ_AVMPLUGINS_ENABLED=y
FREETZ_AVMPLUGINS_MEDIASRV=y
FREETZ_AVMPLUGINS_MINI=y
FREETZ_AVMPLUGINS_NTFS=y
FREETZ_AVMPLUGINS_ONLINEPB=y
FREETZ_AVMPLUGINS_SAMBA=y
FREETZ_AVMPLUGINS_TAM=y
FREETZ_AVMPLUGINS_WEBDAV=y
FREETZ_SQUASHFS_BLOCKSIZE_65536=y
FREETZ_BUSYBOX_INETD=y
FREETZ_BUSYBOX_START_STOP_DAEMON=y
FREETZ_BUSYBOX_WGET=y
FREETZ_BUSYBOX_NICE=y
FREETZ_MODULE_ext3=y
FREETZ_MODULE_ext2=y
FREETZ_MODULE_fuse=y
FREETZ_MODULE_jbd=y
FREETZ_MODULE_lockd=y
FREETZ_MODULE_mini_fo=y
FREETZ_MODULE_nfsd=y
FREETZ_MODULE_exportfs=y
FREETZ_MODULE_nls_cp437=y
FREETZ_MODULE_nls_iso8859_1=y
FREETZ_MODULE_mbcache=y
FREETZ_MODULE_sunrpc=y
FREETZ_LIB_libz=y
FREETZ_LIB_libblkid=y
FREETZ_LIB_libuuid=y
FREETZ_LIB_libfreetype=y
FREETZ_LIB_libart_lgpl_2=y
FREETZ_LIB_libpng12=y
FREETZ_LIB_ld_uClibc=y
FREETZ_LIB_libcrypt=y
FREETZ_LIB_libdl=y
FREETZ_LIB_libm=y
FREETZ_LIB_libnsl=y
FREETZ_LIB_libpthread=y
FREETZ_LIB_librt=y
FREETZ_LIB_libuClibc=y
FREETZ_LIB_libutil=y
FREETZ_LIB_libgcc_s=y
FREETZ_LIB_libncurses=y
FREETZ_SHARE_terminfo=y
FREETZ_SHARE_terminfo_ansi=y
FREETZ_SHARE_terminfo_gnome=y
FREETZ_SHARE_terminfo_konsole=y
FREETZ_SHARE_terminfo_linux=y
FREETZ_SHARE_terminfo_putty=y
FREETZ_SHARE_terminfo_rxvt=y
FREETZ_SHARE_terminfo_screen=y
FREETZ_SHARE_terminfo_screenMINUSw=y
FREETZ_SHARE_terminfo_sun=y
FREETZ_SHARE_terminfo_vt100=y
FREETZ_SHARE_terminfo_vt102=y
FREETZ_SHARE_terminfo_vt102MINUSnsgr=y
FREETZ_SHARE_terminfo_vt102MINUSw=y
FREETZ_SHARE_terminfo_vt200=y
FREETZ_SHARE_terminfo_vt220=y
FREETZ_SHARE_terminfo_vt52=y
FREETZ_SHARE_terminfo_xterm=y
FREETZ_SHARE_terminfo_xtermMINUScolor=y
FREETZ_SHARE_terminfo_xtermMINUSxfree86=y
FREETZ_LIB_libpanel=y
FREETZ_LIB_libpcap=y
FREETZ_LIB_libelf=y
FREETZ_LIB_libfreetz=y
FREETZ_DOWNLOAD_TOOLCHAIN=y
FREETZ_TARGET_CROSS="mipsel-linux-uclibc-"
FREETZ_TARGET_MAKE_PATH="toolchain/target/bin"
FREETZ_TARGET_CFLAGS="-Os -pipe -march=4kc -Wa,--trap"
FREETZ_JLEVEL=2
FREETZ_KERNEL_CROSS="mipsel-unknown-linux-gnu-"
FREETZ_KERNEL_MAKE_PATH="toolchain/kernel/bin"
FREETZ_KERNEL_VERSION_2_6_19_2=y
FREETZ_KERNEL_VERSION="2.6.19.2"
FREETZ_TARGET_UCLIBC_VERSION_0_9_29=y
FREETZ_TARGET_COMPILER_GCC_4_2_4_UCLIBC_0_9_29=y
FREETZ_TARGET_GCC_VERSION="4.2.4"
FREETZ_TARGET_UCLIBC_VERSION="0.9.29"
FREETZ_TARGET_BINUTILS_VERSION="2.18"
FREETZ_TARGET_UCLIBC_REF="mod"
FREETZ_TARGET_GXX=y
FREETZ_TARGET_CCACHE=y
FREETZ_TARGET_LFS=y
FREETZ_KERNEL_GCC_VERSION="3.4.6"
FREETZ_KERNEL_BINUTILS_VERSION="2.17.50.0.17"

syslog:

Code:

Jan  1 01:00:49 fritz user.err kernel: [mem_map-hack]: reduce size from 3145728 524288 Bytes
Jan  1 01:00:49 fritz user.err kernel: [mem_map-hack]: move map base from 0x942a4000 to 0x94024000
Jan  1 01:00:49 fritz user.debug kernel:   DMA zone: 767 pages used for memmap
Jan  1 01:00:49 fritz user.debug kernel:   DMA zone: 0 pages reserved
Jan  1 01:00:49 fritz user.debug kernel:   DMA zone: 97473 pages, LIFO batch:31
Jan  1 01:00:49 fritz user.debug kernel:   Normal zone: 0 pages used for memmap
Jan  1 01:00:49 fritz user.err kernel: [request_resource] Kernel code: start 0x14000000 < root->start 0x17fc0000
Jan  1 01:00:49 fritz user.err kernel: [request_resource] Kernel data: start 0x141b92a8 < root->start 0x17fc0000
Jan  1 01:00:49 fritz user.warn kernel: Built 1 zonelists.  Total pages: 97473
Jan  1 01:00:49 fritz user.notice kernel: Kernel command line: init=/etc/init.d/rc.usbroot  usbroot=/dev/sda1:ext3:/root rw,noatime,nodiratime console=ttyS0,38400n8r
Jan  1 01:00:49 fritz user.warn kernel: Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.
Jan  1 01:00:49 fritz user.warn kernel: Primary data cache 16kB, 4-way, linesize 16 bytes.
Jan  1 01:00:49 fritz user.info kernel: Synthesized TLB refill handler (20 instructions).
Jan  1 01:00:49 fritz user.info kernel: Synthesized TLB load handler fastpath (32 instructions).
Jan  1 01:00:49 fritz user.info kernel: Synthesized TLB store handler fastpath (32 instructions).
Jan  1 01:00:49 fritz user.info kernel: Synthesized TLB modify handler fastpath (31 instructions).
Jan  1 01:00:49 fritz user.warn kernel: PID hash table entries: 2048 (order: 11, 8192 bytes)
Jan  1 01:00:49 fritz user.warn kernel: CPU frequency 360.00 MHz
Jan  1 01:00:49 fritz user.warn kernel: Using 180.000 MHz high precision timer.
Jan  1 01:00:49 fritz user.warn kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan  1 01:00:49 fritz user.warn kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan  1 01:00:49 fritz user.warn kernel: [free_all_bootmem]
Jan  1 01:00:49 fritz user.info kernel: Memory: 61568k/65280k available (1764k kernel code, 3608k reserved, 451k data, 132k init, 0k highmem)
Jan  1 01:00:49 fritz user.debug kernel: Calibrating delay loop... 359.62 BogoMIPS (lpj=1798144)
Jan  1 01:00:49 fritz user.warn kernel: Mount-cache hash table entries: 512
Jan  1 01:00:49 fritz user.warn kernel: Checking for 'wait' instruction...  available.
Jan  1 01:00:49 fritz user.info kernel: NET: Registered protocol family 16
Jan  1 01:00:49 fritz user.warn kernel: [ur8_mtd_init]
Jan  1 01:00:49 fritz user.warn kernel: [ur8_mtd_init] flashsize = 0x01000000 Byte 16 MBytes
Jan  1 01:00:49 fritz user.warn kernel: [ur8_mtd_init] mtd[0] = 0x90000000,0x90000000
Jan  1 01:00:49 fritz user.warn kernel: [ur8_mtd_init] mtd[1] = 0x90020000,0x90F80000
Jan  1 01:00:49 fritz user.warn kernel: [ur8_mtd_init] mtd[2] = 0x90000000,0x90020000
Jan  1 01:00:49 fritz user.warn kernel: [ur8_mtd_init] mtd[3] = 0x90F80000,0x90FC0000
Jan  1 01:00:49 fritz user.warn kernel: [ur8_mtd_init] mtd[4] = 0x90FC0000,0x91000000
Jan  1 01:00:49 fritz user.warn kernel: [ur8_mtd_init] mtd[5] = 0x90000000,0x90000000
Jan  1 01:00:49 fritz user.err kernel: pcibios_read_config: accessing present PCI slot : 14, where 0, size 4
Jan  1 01:00:49 fritz user.err kernel: Master and Slave Enabled
Jan  1 01:00:49 fritz user.info kernel: pktsched: using high resolution timer
Jan  1 01:00:49 fritz user.info kernel: NET: Registered protocol family 2
Jan  1 01:00:49 fritz user.warn kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan  1 01:00:49 fritz user.warn kernel: TCP established hash table entries: 16384 (order: 4, 65536 bytes)
Jan  1 01:00:49 fritz user.warn kernel: TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
Jan  1 01:00:49 fritz user.info kernel: TCP: Hash tables configured (established 16384 bind 8192)
Jan  1 01:00:49 fritz user.info kernel: TCP reno registered
Jan  1 01:00:49 fritz user.info kernel: squashfs: version 3.2 (2007/01/02) Phillip Lougher
Jan  1 01:00:49 fritz user.info kernel: io scheduler noop registered (default)
Jan  1 01:00:49 fritz user.info kernel: avm_n
Jan  1 01:00:49 fritz user.info kernel: et_trace: Up and running.
Jan  1 01:00:49 fritz user.warn kernel: [avm] configured: watchdog event debug enable direct gpio 
Jan  1 01:00:49 fritz user.warn kernel: 
Jan  1 01:00:49 fritz user.warn kernel: AVM_WATCHDOG: Watchdog Driver for AR7 Hardware (Version 1.0, build: Dec  2 2009 12:09:48)
Jan  1 01:00:49 fritz user.info kernel: Serial: 8250/16550 driver $Revision: 1.3 $ 1 ports, IRQ sharing disabled
Jan  1 01:00:49 fritz user.info kernel: serial8250: ttyS0 at MMIO 0x0 (irq = 15) is a UR8_UART
Jan  1 01:00:49 fritz user.err kernel: [cpmac] Version: URL: svn://EmbeddedVM/home/SVN/drivers/cpmac/tags/1.110-r820-trunk-VLAN-Fix_ADM_und_Tantos  -  Revision 538:821  -  Di 23. Jun 16:20:50 CEST 2009
Jan  1 01:00:49 fritz user.err kernel: [cpmac] [cpmac_if_register] dev cpmac0 (phy_id 0) registered
Jan  1 01:00:49 fritz user.info kernel: tun: Universal TUN/TAP device driver, 1.6
Jan  1 01:00:49 fritz user.info kernel: tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
Jan  1 01:00:49 fritz user.notice kernel: physmap platform flash device: 01000001 at 10000000
Jan  1 01:00:49 fritz user.info kernel: physmap-flash.1: Found 1 x16 devices at 0x0 in 16-bit bank
Jan  1 01:00:49 fritz user.warn kernel:  Amd/Fujitsu Extended Query Table at 0x0040
Jan  1 01:00:49 fritz user.warn kernel: physmap-flash.1: CFI does not contain boot bank location. Assuming top.
Jan  1 01:00:49 fritz user.notice kernel: number of CFI chips: 1
Jan  1 01:00:49 fritz user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Jan  1 01:00:49 fritz user.notice kernel: RedBoot partition parsing not available
Jan  1 01:00:49 fritz user.warn kernel: [ur8_jffs2_parser_function] mtd_info->name physmap-flash.1 mtd_info->index 0 param=0 p_mtd_pat=0x943f1a3c
Jan  1 01:00:49 fritz user.warn kernel: [ur8_jffs2_parser_function] try partition kernel (offset 0x20000 len 16121856)
Jan  1 01:00:49 fritz user.warn kernel: [ur8_jffs2_parser_function] magic 20031985 found @pos 0xba0000, size 4063232
Jan  1 01:00:49 fritz user.warn kernel: [ur8_squashfs_parser_function] mtd_info->name physmap-flash.1 mtd_info->index 0 param=0 p_mtd_pat=0x943f1a3c
Jan  1 01:00:49 fritz user.warn kernel: [ur8_squashfs_parser_function] *p_mtd_pat->name filesystem
Jan  1 01:00:49 fritz user.warn kernel: [ur8_squashfs_parser_function] try partition kernel (offset 0x20000 len 16121856 blocksize=20000)
Jan  1 01:00:49 fritz user.warn kernel: [ur8_squashfs_parser_function] magic found @pos 0xdbe00
Jan  1 01:00:49 fritz user.notice kernel: 6 find_squashfs partitions found on MTD device physmap-flash.1
Jan  1 01:00:49 fritz user.notice kernel: Creating 6 MTD partitions on "physmap-flash.1":
Jan  1 01:00:49 fritz user.notice kernel: 0x000dbe00-0x00f80000 : "rootfs"
Jan  1 01:00:49 fritz user.warn kernel: mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
Jan  1 01:00:49 fritz user.warn kernel: [ur8_mtd_add_notifier] name rootfs
Jan  1 01:00:49 fritz user.warn kernel: [ur8_mtd_add_notifier] use rootfs
Jan  1 01:00:49 fritz user.warn kernel: [ur8_mtd_add_notifier] root device: /dev/mtdblock0 (rootfs)
Jan  1 01:00:49 fritz user.notice kernel: 0x00020000-0x000dbe00 : "kernel"
Jan  1 01:00:49 fritz user.warn kernel: mtd: partition "kernel" doesn't end on an erase block -- force read-only
Jan  1 01:00:49 fritz user.warn kernel: [ur8_mtd_add_notifier] name kernel
Jan  1 01:00:49 fritz user.warn kernel: [ur8_mtd_add_notifier] skip kernel
Jan  1 01:00:49 fritz user.notice kernel: 0x00000000-0x00020000 : "urlader"
Jan  1 01:00:49 fritz user.warn kernel: [ur8_mtd_add_notifier] name urlader
Jan  1 01:00:49 fritz user.warn kernel: [ur8_mtd_add_notifier] skip urlader
Jan  1 01:00:49 fritz user.notice kernel: 0x00f80000-0x00fc0000 : "tffs (1)"
Jan  1 01:00:49 fritz user.warn kernel: [ur8_mtd_add_notifier] name tffs (1)
Jan  1 01:00:49 fritz user.warn kernel: [ur8_mtd_add_notifier] skip tffs (1)
Jan  1 01:00:49 fritz user.notice kernel: 0x00fc0000-0x01000000 : "tffs (2)"
Jan  1 01:00:49 fritz user.warn kernel: [ur8_mtd_add_notifier] name tffs (2)
Jan  1 01:00:49 fritz user.warn kernel: [ur8_mtd_add_notifier] skip tffs (2)
Jan  1 01:00:49 fritz user.notice kernel: 0x00ba0000-0x00f80000 : "jffs2"
Jan  1 01:00:49 fritz user.warn kernel: [ur8_mtd_add_notifier] name jffs2
Jan  1 01:00:49 fritz user.warn kernel: [ur8_mtd_add_notifier] skip jffs2
Jan  1 01:00:49 fritz user.warn kernel: Generic platform RAM MTD, (c) 2004 Simtec Electronics
Jan  1 01:00:49 fritz user.err kernel: mtd-ram mtd-ram.2: no memory resource specified
Jan  1 01:00:49 fritz user.err kernel: [ur8_ram_mtd_set_rw] PLATRAM_RO
Jan  1 01:00:49 fritz user.warn kernel: mtd-ram: probe of mtd-ram.2 failed with error -2
Jan  1 01:00:49 fritz user.notice kernel: CAPI Subsystem Rev 1.1.2.8
Jan  1 01:00:49 fritz user.info kernel: TCP cubic registered
Jan  1 01:00:49 fritz user.info kernel: mcfw: IGMPv3 fast forwarding
Jan  1 01:00:49 fritz user.info kernel: NET: Registered protocol family 1
Jan  1 01:00:49 fritz user.info kernel: NET: Registered protocol family 17
Jan  1 01:00:49 fritz user.info kernel: NET: Registered protocol family 8
Jan  1 01:00:49 fritz user.info kernel: NET: Registered protocol family 20
Jan  1 01:00:49 fritz user.warn kernel: MUSB UR8 pdev active!
Jan  1 01:00:49 fritz user.err kernel: PCI_STATUS_SET: 40000
Jan  1 01:00:49 fritz user.err kernel: PCI_STATUS_CLR: 40000
Jan  1 01:00:49 fritz user.err kernel: PCI_HOST_INT_EN: 0
Jan  1 01:00:49 fritz user.err kernel: PCI_HOST_INT_CLR: 0
Jan  1 01:00:49 fritz user.err kernel: PCI_BE_INT_En: 0
Jan  1 01:00:49 fritz user.err kernel: PCI_BE_INT_CLR: 0
Jan  1 01:00:49 fritz user.err kernel: [pci_int_init] done
Jan  1 01:00:49 fritz user.warn kernel: TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 2.0)
Jan  1 01:00:49 fritz user.info kernel: Time: MIPS clocksource has been installed.
Jan  1 01:00:49 fritz user.warn kernel:       mount on mtd3 and mtd4 (double buffering)
Jan  1 01:00:49 fritz user.info kernel: Adam2 environment variables API installed.
Jan  1 01:00:49 fritz user.info kernel: [avm_new] push_button_gpio=25 value=0 enabled
Jan  1 01:00:49 fritz user.warn kernel: VFS: Mounted root (squashfs filesystem) readonly.
Jan  1 01:00:49 fritz user.warn kernel: Freeing prom memory: 0kb freed
Jan  1 01:00:49 fritz user.info kernel: Freeing unused kernel memory: 132k freed
Jan  1 01:00:49 fritz user.warn kernel: Failed to execute /etc/init.d/rc.usbroot.  Attempting defaults...
Jan  1 01:00:49 fritz user.warn kernel: AVM_WATCHDOG: System Init UEberwachung 240 Sekunden
Jan  1 01:00:49 fritz user.warn kernel: TFFS Name Table F
Jan  1 01:00:49 fritz user.warn kernel: led_modul_Fritz_Box_7270: module license '
Jan  1 01:00:49 fritz user.warn kernel: (C) Copyright 2008 by AVM
Jan  1 01:00:49 fritz user.warn kernel: ' taintskernel.
Jan  1 01:00:49 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 1 name power
Jan  1 01:00:49 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 9 name internet
Jan  1 01:00:49 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 27 name festnetz
Jan  1 01:00:49 fritz user.warn kernel: [led_gpio_bit_driver_init
Jan  1 01:00:49 fritz user.info kernel: ] gpio 28 name wlan
Jan  1 01:00:49 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 17 name dual1
Jan  1 01:00:49 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 35 name dual2
Jan  1 01:00:49 fritz user.err kernel: [BUTTON] no buttons defined - disable new button controls
Jan  1 01:00:49 fritz user.err kernel: [LED] "wyatt_earp_turn_off_leds" (0x00000000) not loaded
Jan  1 01:00:49 fritz user.info kernel: [avm_new]push_button_ctrl: gpio=23 value=1 enabled
Jan  1 01:00:49 fritz user.info kernel: [avm_new]push_button_ctrl:'Taster_4': enable=2 gpio=23 regaddr=00000000 button_type=0
Jan  1 01:00:49 fritz user.warn kernel: patch_dectfw: patch_adress: 7094 max_len: 22 with Version 2 Len: 16
Jan  1 01:00:49 fritz user.warn kernel: patch_dectfw: c009b000, datalen = 32159, 
Jan  1 01:00:49 fritz user.info kernel: [avm_new]push_button 'Taster_4', released: GPIO=23 presses=0 key=button_key_10
Jan  1 01:00:49 fritz user.warn kernel: 
Jan  1 01:00:49 fritz user.warn kernel: **************************************************************
Jan  1 01:00:49 fritz user.warn kernel: dect_file_process: upload of '/lib/modules/dectfw_secondlevel.hex' successfull
Jan  1 01:00:49 fritz user.err kernel: [piglet]bitfile '/lib/modules/microvoip_isdn_top.bit'
Jan  1 01:00:49 fritz user.err kernel: [piglet] Read 169291 bytes total from file
Jan  1 01:00:49 fritz user.warn kernel: [piglet]TDM: FS: 7990 Hz CLK:2047800 Hz
Jan  1 01:00:49 fritz user.info kernel: JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
Jan  1 01:00:49 fritz user.warn kernel: 
Jan  1 01:00:49 fritz user.warn kernel: [avm_debug]redirect kernel-messages (/dev/debug)
Jan  1 01:00:50 fritz daemon.info chronyd[1336]: chronyd version 1.23 starting
Jan  1 01:00:51 fritz daemon.info chronyd[1336]: Initial txc.tick=10000 txc.freq=0 (0.00000000) txc.offset=0 => hz=100 shift_hz=7
Jan  1 01:00:51 fritz daemon.info chronyd[1336]: set_config_hz=0 hz=100 shift_hz=7 basic_freq_scale=1.28000000 nominal_tick=10000 slew_delta_tick=833 max_tick_bias=1000
Jan  1 01:00:51 fritz daemon.info chronyd[1336]: Linux kernel major=2 minor=6 patch=19
Jan  1 01:00:51 fritz daemon.info chronyd[1336]: calculated_freq_scale=0.99902439 freq_scale=0.99902439
Jan  1 01:00:51 fritz daemon.info chronyd[1336]: System's initial offset : 313069576.371231 seconds slow of true (step)
Dec  2 12:47:09 fritz daemon.warn chronyd[1336]: Could not send to 194.249.198.37 : Bad file descriptor
Dec  2 12:47:09 fritz daemon.warn chronyd[1336]: Could not send to 194.249.198.37 : Bad file descriptor
Dec  2 12:47:09 fritz daemon.warn chronyd[1336]: Could not send to 194.249.198.37 : Bad file descriptor
Dec  2 12:47:09 fritz daemon.warn chronyd[1336]: Could not send to 194.249.198.37 : Bad file descriptor
Dec  2 12:47:10 fritz user.err telefon[1131]: set initial telefon time from linux time to 12:47 2.12 2009!
Dec  2 12:47:10 fritz daemon.warn chronyd[1336]: Could not send to 194.249.198.37 : Bad file descriptor
Dec  2 12:47:10 fritz daemon.warn chronyd[1336]: Could not send to 194.249.198.37 : Bad file descriptor
Dec  2 12:47:10 fritz daemon.warn chronyd[1336]: Could not send to 194.249.198.37 : Bad file descriptor
Dec  2 12:47:10 fritz daemon.warn chronyd[1336]: Could not send to 194.249.198.37 : Bad file descriptor
Dec  2 12:47:11 fritz daemon.warn chronyd[1336]: Could not send to 194.249.198.37 : Bad file descriptor
Dec  2 12:47:11 fritz daemon.warn chronyd[1336]: Could not send to 194.249.198.37 : Bad file descriptor
Dec  2 12:47:11 fritz daemon.warn chronyd[1336]: Could not send to 194.249.198.37 : Bad file descriptor
Dec  2 12:47:11 fritz daemon.warn chronyd[1336]: Could not send to 194.249.198.37 : Bad file descriptor
Dec  2 12:47:22 fritz authpriv.info dropbear[1498]: Running in background
Dec  2 12:47:58 fritz daemon.info hostapd: ath0: STA 00:1c:f0:5b:d5:a2 IEEE 802.11: associated
Dec  2 12:47:58 fritz daemon.info hostapd: ath0: STA 00:1c:f0:5b:d5:a2 WPA: pairwise key handshake completed (RSN)
Dec  2 12:48:07 fritz daemon.info chronyd[1336]: Trimming RTC, error = -1259757999.611 seconds
Dec  2 12:57:09 fritz daemon.info hostapd: ath0: STA 00:1c:f0:5b:d5:a2 WPA: group key handshake completed (RSN)
Dec  2 13:07:09 fritz daemon.info hostapd: ath0: STA 00:1c:f0:5b:d5:a2 WPA: group key handshake completed (RSN)
Dec  2 13:17:09 fritz daemon.info hostapd: ath0: STA 00:1c:f0:5b:d5:a2 WPA: group key handshake completed (RSN)
Dec  2 13:21:24 fritz authpriv.info dropbear[3667]: Child connection from 192.168.10.23:50244
Dec  2 13:21:31 fritz authpriv.notice dropbear[3667]: password auth succeeded for 'root' from 192.168.10.23:50244
Dec  2 13:21:47 fritz auth.info passwd: Password for root changed by root

/var/log/mod.log:

Code:

rc.mod version freetz-devel-3992
crond is disabled
telnetd is disabled
Starting Freetz webinterface...done.
Starting syslogd...done.
chmod: /tmp/flash/nhiptboot.cfg: No such file or directory
/etc/init.d/rc.nhipt: .: line 108: can't open /tmp/flash/nhiptboot.cfg
Disk spindown is disabled
nfsd is disabled
dnsmasq already started.
Creating RSA and DSS host keys
Will output 1024 bit rsa secret key to '/tmp/flash/dropbear/rsa_host_key'
Generating key, this may take a while...
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAAAgwCNi3rChPM9tfdLFF+xEMARu9tFkhSbPk7GAFhYxec+ayx1fa5j3kebR/MgpN0Kp8+qk7EF1r8l3n83rDIiIga2EPWEomtONNncHcWr+rOsZUMV3SIgoFbzCTrTZiehJodCvsoPXCRubHuzYzenU6Uu0521HVOAt+Fz53Zgo4uqGyxP [email protected]
Fingerprint: md5 2a:14:0a:3d:c1:cd:a8:8e:03:80:3a:42:85:32:ae:58
Will output 1024 bit dss secret key to '/tmp/flash/dropbear/dss_host_key'
Generating key, this may take a while...
Public key portion is:
ssh-dss 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 [email protected]
Fingerprint: md5 8e:ac:17:7d:09:07:61:8f:f2:bd:03:3c:08:9c:1f:0f
Writing /var/flash/freetz...done.
11776 bytes written.
Starting dropbear SSH server...done.
samba is disabled
rrdstats is disabled
Setting up SSH authorized_keys for root...initialized.
inadyn-mt is disabled
mini_fo is disabled
Starting AVM-Plugins...mediasrv(failed)...mini(failed)...ntfs...onlinepbcat: can't open '/var/USB-proc-bus-*-storage-*': No such file or directory
...samba...tam...webdav...done.
swap is disabled

cuma · 2 Dez 2009

Weshalb hast du NTFS und Samba von AVM und Freetz im Image? Brauchst du all diese Plugins? Wird der Host-key bei dir immer erstellt? Miste zuerst mal ein bisschen aus

colonia27 · 2 Dez 2009

Hast du die HDD mal versucht unter einem Linux zu testen bzw. neu zu formatieren?
Evtl. auch mal einen fsck ausführen, und anschliessend vernünftig wieder vom PC abzuhängen.
Hin und wieder sind die Boxen da etwas sensibel was das schnelle "abrupfen" vom USB angeht.

Silent-Tears · 2 Dez 2009

Man könnte auch mal testen was passiert, wenn man die Platte von Hand mountet...

olistudent · 2 Dez 2009

Was sagt denn die Ausgabe von "lsmod"? Und von "fstyp /dev/sda1"?

MfG Oliver

CaptHowdy · 3 Dez 2009

Hi Leute,
habs erst jetzt geschafft mich wieder darum zu kümmern.
Also das mit AVM-Plugins wusste ich gar nicht hab ich aber jetz bis auf onlinephonebook und tam rausgenommen.
Festplatte am Linux PC ist einwandfrei auch fsck -f is ohne probleme durchgelaufen. Korrekt Unmounten hat mich auch nicht weiter gebracht.
Formattieren geht nicht da es eine Sicherungsplatte ist mit zuviel Daten die ich nicht auslagern kann.

lsmod:

Code:

/var/mod/root # lsmod
Module                  Size  Used by    Tainted: P
vfat                   11303  0
fat                    53460  1 vfat
nls_cp437               5368  0
nls_iso8859_1           3714  0
usb_storage            36397  0
sd_mod                 17441  0
scsi_mod               93945  2 usb_storage,sd_mod
rtc_sysfs               2704  0
rtc_proc                3847  0
rtc_dev                 5493  1
sch_sfq                 5619  4
sch_llq                 9102  1
sch_tbf                 5664  1
userman                33682  2
wlan_scan_ap            8449  1
wlan_acl                4090  1
wlan_wep                6046  0
wlan_tkip              12421  0
wlan_ccmp               8424  4
wlan_xauth              1182  0
ath_pci               151709  0
ath_rate_atheros       59203  1 ath_pci
wlan                  227770  9 wlan_scan_ap,wlan_acl,wlan_wep,wlan_tkip,wlan_ccmp,wlan_xauth,ath_pci,ath_rate_atheros
ath_dfs                39236  2 ath_pci,wlan
ath_hal               237370  4 ath_pci,ath_rate_atheros,ath_dfs
avm_ath_extensions     53332  4 ath_pci,ath_rate_atheros,wlan,ath_hal
ext3                  131149  0
jbd                    62144  1 ext3
ext2                   58569  0
mbcache                 7075  2 ext3,ext2
kdsldmod              867132  7 userman
musb_hdrc              37281  0
usbcore               125996  3 usb_storage,musb_hdrc
dect_io                21126  2
avm_dect              388083  1 dect_io
capi_codec            142935  0
isdn_fbox_fon5        761042  0
pcmlink               249602  3 avm_dect,capi_codec,isdn_fbox_fon5
rtc_avm                 6573  2 pcmlink
rtc_core                7083  4 rtc_sysfs,rtc_proc,rtc_dev,rtc_avm
rtc_lib                 2712  3 rtc_sysfs,rtc_avm,rtc_core
dsl_ur8               170609  0
jffs2                 115345  1
Piglet_noemif          36490  0
led_modul_Fritz_Box_7270    63132  9 ath_hal

fstyp /dev/sda1:
ergibt gar nichts

Manuelles Mounten:

Code:

/var/mod/root # mkdir /var/media/ftp/uStor01
/var/mod/root # mount -t ext3 /dev/sda1 /var/media/ftp/uStor01
mount: mounting /dev/sda1 on /var/media/ftp/uStor01 failed: Invalid argument
/var/mod/root #

Vielen Dank erst ma für die schelle Unterstützung.

Silent-Tears · 3 Dez 2009

Dann passt da was an deinem Filesystem nicht. Denn "ext3" sollte das Ergebnis von fsty sein bei einer ext3-Partition.

Nimm den Datenträger, erzeuge die Partitionstabelle neu und formatiere dann entsprechend in ext3.

CaptHowdy · 3 Dez 2009

[Edit frank_m24: Mehrere Beiträge zusammengefasst. Man kann seine Beiträge auch editieren.]
Ich werds probieren, dauer erst mal 1TB daten wegschaufeln.

Ich mach erst mal nen test mit einem SticK.

[Beitrag 2:]
Es scheint wirklich an der Formatierung zu liegen,
habe nen Stick mit ext3 als Logisches Laufwerk Partitioniert und Funktioniert :-D
Danke für die Tipps

Kann es sein das das Problem daraus entstandt, das ich auf Der Platte ne Primär Partition Ext3 gemacht habe oder aber vielleicht GPT statt MSDOS Schema?

Silent-Tears · 3 Dez 2009

#Defaults nutzen und keine Experimente machen sollte schon helfen, so lang man nicht weiss, was man tut.

eminem · 6 Dez 2009

Hallo, mische mich mal freundlich ein

Und zwar möchte ich auch eine ext3 Festplatte anschließen, und bei mir erkennt er die ext3 nicht, unter Linux generell wird Sie erkannt, nur auf der Box nicht, ich lese hier was von automount und ext3, ich finde diese pakete nicht im freetz buildung-oberfläche, kann mir jemand weiter helfen?

Code:

mkdir /var/media/ftp/uStor05
mount -t ext3 /dev/sda5 /var/media/ftp/uStor05
mount: mounting /dev/sda5 on /var/media/ftp/uStor05 failed: No such device

und einmal der auszug von (cat /proc/partitions)

Code:

  31     0       8192 mtdblock0
  31     1       6945 mtdblock1
  31     2       7616 mtdblock2
  31     3         64 mtdblock3
  31     4        256 mtdblock4
  31     5        256 mtdblock5
  31     6        128 mtdblock6
  31     7       7488 mtdblock7
   8     0   39070080 sda
   8     2          1 sda2
   8     5   20972826 sda5   <<< das sollte meine sein

Mfg
eminem

sf3978 · 6 Dez 2009

eminem schrieb:
[...], ich lese hier was von automount und ext3, ich finde diese pakete nicht im freetz buildung-oberfläche, kann mir jemand weiter helfen? [...]

Siehe hier (klick).

olistudent · 6 Dez 2009

Hierzu die 3 Standardfragen:
1. Welche Box hast du?
2. ext3 Modul geladen? (lsmod)
3. Was sagt "fstyp /dev/sda5"?

MfG Oliver

sf3978 · 6 Dez 2009

@Oliver
Siehe hier (klick). Jetzt geht es um die Schnelligkeit von Fritzload.

Silent-Tears · 6 Dez 2009

Gab es nicht mal Probleme mit erweiterten Partitionen?

hermann72pb · 6 Dez 2009

@Silent-Tears: Ich bin immer noch an meinen run_mount und storage Experimenten dran. In Prinzip ist die Sache bei mir schon in etwa zu Hälfte fertig. Bei meiner Experimentenbox gibt es auch logische Partitionen. Sie werden eigentlich ohne Probleme erkannt bis auf die einleitende Partition, die dann entsprechend relativ kurz ist und keinen Wert nach fstyp meldet. Daraufhin wird diese und nur diese nichts bedeutende Partition als "nicht bekannt" erkannt. Man bekommt dazu auch entsprechende Meldungen im AVM-Log. Die SWAP-Partitionen fange ich bei mir schon halbwegs ab, dass dort wenigstens intern eine andere Fehlermeldung kommt. Später könnte man einbauen, dass auch die einleitende erweiterte Partition vernünftig behandelt wird. Dafür sollte man sich allerdings überlegen, ob man fstyp-Binary tauscht oder etwas eigenes macht.
Ich finde unsere fstyp-binary auf der Box allerwenigstens unzureichend, wenn sogar nicht ganz daneben. Bereits mit mounted.cgi hatte ich mächtige Probleme mit fstyp überhaupt Partitionen zu erkennen und bin auf eine andere Methode umgeschwenkt. Vor dem Einbinden funktioniert meine Lösung allerdings nicht.

MfG

RalfFriedl · 6 Dez 2009

eminem schrieb:
ich lese hier was von automount und ext3

Automount wird Dir nicht helfen, wenn mount schon generell nicht funktioniert.

Wenn schon "No such device" steht, existiert denn /dev/sda5?

USB-Platte EXT3 mounted nicht 7270

Neuer User

colonia27

Guest

Neuer User

IPPF-Urgestein

Neuer User

Aktives Mitglied

colonia27

Guest

IPPF-Promi

IPPF-Urgestein

Neuer User

IPPF-Promi

Neuer User

IPPF-Promi

Neuer User

IPPF-Promi

IPPF-Urgestein

IPPF-Promi

IPPF-Promi

IPPF-Promi

IPPF-Urgestein

Statistik des Forums