Hallo an die Chan_SCCP Entwickler!
Mit dem neuem RC2 treten bei mir folgende Probleme auf:
1. Alle ausgehenden Anrufe werden im Display mit "To Unknown Number" angezeigt.
2. Bei eingehenden Anrufen wird der gesetzte CallerId(name) nicht mehr angezeigt.
Server: Asterisk 1.6.2.10
Telefone: 7970 Firmware 8.3.1
Danke und beste Grüße,
Markus
Geändert von mschatz (31.08.2010 um 00:18 Uhr)
Hier man ein Auszug aus meiner sccp.conf:
Und hier noch ein Log aus der CLI bei ankommenden Anrufen:Code:[general] keepalive = 30 context = default dateFormat = D.M.Y bindaddr = 178.77.72.XXX port = 2000 disallow = all allow = alaw allow = ulaw allow = g729 firstdigittimeout = 16 digittimeout = 8 digittimeoutchar = # echocancel = on [SEP001BD40B5XXX] type = device devicetype = 7970 description = Markus button = line, 02514193XXX button = line, 02517129XXX [02514193XXX] type = line cid_num = 02514193XXX label = 02514193XXX [02517129XXX] type = line cid_num = 02517129XXX label = 02517129XXX
Code:-- SCCP: Asterisk asked to create a channel type=SCCP, format=4, line=02514193XXX, subscriptionId.number=, options=ringer=inside [Aug 30 15:46:27] NOTICE[30011]: chan_sccp.c:218 sccp_request: : calling all subscribers [SCCP] in file chan_sccp.c, line 265 (sccp_request) -- : Asterisk request to call SCCP/02514193XXX-00000007 -- SEP001BD40B5XXX: send callInfo of callid 7 00000000 - 01 00 00 00 07 00 00 00 01 00 00 00 00 00 00 00 ................ 00000010 - 00 00 00 00 01 00 00 00 01 00 00 00 00 00 00 00 ................ 00000020 - 30 31 37 31 33 34 37 36 33 34 30 00 00 30 32 35 01713476XXX..025 00000030 - 31 34 31 39 33 34 37 30 00 00 00 00 00 00 00 4D 14193XXX.......M 00000040 - 61 72 6B 75 73 20 53 63 68 61 74 7A 20 28 4D 6F arkus Handy..... 00000050 - 62 69 6C 65 29 00 00 00 00 00 00 00 .......... > notify asterisk to set state to sccp channelstate RINGING (4) => asterisk: Device is ringing (6) on channel SCCP/02514193XXX
welche protocolversion ist gesetzt?
sccp show device SEP001BD40B5XXX
Anbindung:T-DSL 768/128,Arcor DSL-Flat 2 MBit/256kbits
Router: Cisco 806
Server: Asterisk branch 1.8
Phone(s): Cisco 7970, Cisco 7971, Cisco 7906, Cisco 7912, Cisco 7921, Cisco 7940, iphone
channel: chan-sccp-b v4 DeveloperPreview
Provider: sipgate.de, sipphone.com
Folgende Device Infos sind gesetzt:
Code:MAC-Address : SEP001BD40B5XXX Protocol Version : Supported '12', In Use '12' Keepalive : 30 Registration state : OK(3) State : On Hook(0) MWI handset light : OFF Description : Markus Config Phone Type : 7970 Skinny Phone Type : Cisco 7970(30006) Softkey support : Yes Image Version : Timezone Offset : 0 Capabilities : 0x10c (ulaw|alaw|g729) Codecs preference : (alaw|ulaw|g729) DND Feature enabled: YES DND Status : Disabled Can Transfer : Yes Can Park : Yes Private softkey : Enabled Can CFWDALL : No Can CFWBUSY : No Can CFWNOANSWER : No Dtmf mode : In-Band Nat : No Videosupport? : No Direct RTP : No Trust phone ip : No Early RTP : No Device State (Acc.): On Hook Last Used Accessory: Handset Last dialed number : 0251690XXX
ok, ich kümmere mich
Anbindung:T-DSL 768/128,Arcor DSL-Flat 2 MBit/256kbits
Router: Cisco 806
Server: Asterisk branch 1.8
Phone(s): Cisco 7970, Cisco 7971, Cisco 7906, Cisco 7912, Cisco 7921, Cisco 7940, iphone
channel: chan-sccp-b v4 DeveloperPreview
Provider: sipgate.de, sipphone.com
ok, das liegt an der protocolversion.
kannst du in src/sccp_channel.c mal noch folgenden Zeilen suchen:
und wie folgt ändern:Code:if (device->inuseprotocolversion < 12) { usableFields = 12;
Kannst du mir bescheid geben ob das passt?Code:if (device->inuseprotocolversion < 15) { usableFields = 12;
Geändert von chaos2000 (30.08.2010 um 20:30 Uhr)
Anbindung:T-DSL 768/128,Arcor DSL-Flat 2 MBit/256kbits
Router: Cisco 806
Server: Asterisk branch 1.8
Phone(s): Cisco 7970, Cisco 7971, Cisco 7906, Cisco 7912, Cisco 7921, Cisco 7940, iphone
channel: chan-sccp-b v4 DeveloperPreview
Provider: sipgate.de, sipphone.com
Aber hallo, das hat geklappt.
Klingt logisch, das 7970 wird mit Protokollversion 12 angesprochen, die if-Abfrage hat aber nur für alle Versionen < 12 gegriffen.
Allerdings fragt das Telefon beim Anmelden an den Server auch nach Version 17, bekommt aber nur 12. Ist das so gewollt?
Danke und Gruß,
Markus
Dann hast du in deiner sccp.conf nur die 12 erlaubt
Anbindung:T-DSL 768/128,Arcor DSL-Flat 2 MBit/256kbits
Router: Cisco 806
Server: Asterisk branch 1.8
Phone(s): Cisco 7970, Cisco 7971, Cisco 7906, Cisco 7912, Cisco 7921, Cisco 7940, iphone
channel: chan-sccp-b v4 DeveloperPreview
Provider: sipgate.de, sipphone.com
Nee in der sccp.conf habe ich gar nichts dergleichen erlaubt oder verboten, die Config hatte ich ja oben schon gepostet. Oder habe ich dort noch Fehler drin oder fehlen irgendwelche benötigten Angaben?
Ich habe nämlich gerade auch noch festgestellt dass ich teilweise keine Klingelzeichen mehr höre wenn ich jemanden anrufe. Liegt das auch an der falschen Protokollversion?
schick mir mal bitte die ausgabe der cli wenn sich das device registriert
sccp debug core device
P.S.: default context, bist du dir da sicher?
Anbindung:T-DSL 768/128,Arcor DSL-Flat 2 MBit/256kbits
Router: Cisco 806
Server: Asterisk branch 1.8
Phone(s): Cisco 7970, Cisco 7971, Cisco 7906, Cisco 7912, Cisco 7921, Cisco 7940, iphone
channel: chan-sccp-b v4 DeveloperPreview
Provider: sipgate.de, sipphone.com
Ja der default context reicht für mich, in meiner extensions.conf steht nicht viel drin. Das passt auch alles.
Code:-- SCCP: Accepted connection from 77.177.242.XXX -- SCCP: Using ip 178.77.72.XXX -- SCCP: Alarm Message: Severity: Informational (2), 20: Name=SEP001BD40B5XXX Load= SCCP70.8-3-1S Last=Phone-Keypad [0/0] SEP001BD40B5XXX: is registering, Instance: 0, Type: Cisco 7970 (30006), Version: 12 -- SEP001BD40B5XXX: Allocating device to session (23) 77.177.242.XXX -- SEP001BD40B5XXX: Ask the phone to send keepalive message every 24 seconds 00000000 - 53 45 50 30 30 31 42 44 34 30 42 35 41 39 35 00 SEP001BD40B5XXX. 00000010 - 00 00 00 00 00 00 00 00 0A 00 00 05 36 75 00 00 ............6u.. 00000020 - 05 00 00 00 00 00 00 00 0C 00 70 85 01 00 00 00 ..........p..... 00000030 - 00 00 00 00 00 00 00 00 ........ -- SEP001BD40B5XXX: asked our protocol capability (17). We answered (12). -- SEP001BD40B5XXX: Building button template Cisco 7970(30006), user config 7970 -- SEP001BD40B5XXX: >> Send message Button Template Message -- SEP001BD40B5XXX: Button(0)[ 1] = Redial -- SEP001BD40B5XXX: Button(1)[ 2] = NewCall -- SEP001BD40B5XXX: Button(2)[ 3] = Hold -- SEP001BD40B5XXX: Button(3)[ 4] = Transfer -- SEP001BD40B5XXX: Button(4)[ 5] = CFwdALL -- SEP001BD40B5XXX: Button(5)[ 6] = CFwdBusy -- SEP001BD40B5XXX: Button(6)[ 7] = CFwdNoAnswer -- SEP001BD40B5XXX: Button(7)[ 8] = << -- SEP001BD40B5XXX: Button(8)[ 9] = EndCall -- SEP001BD40B5XXX: Button(9)[10] = Resume -- SEP001BD40B5XXX: Button(10)[11] = Answer -- SEP001BD40B5XXX: Button(11)[12] = Info -- SEP001BD40B5XXX: Button(12)[13] = Confrn -- SEP001BD40B5XXX: Button(13)[14] = Park -- SEP001BD40B5XXX: Button(14)[15] = Join -- SEP001BD40B5XXX: Button(15)[16] = MeetMe -- SEP001BD40B5XXX: Button(16)[17] = PickUp -- SEP001BD40B5XXX: Button(17)[18] = GPickUp -- SEP001BD40B5XXX: Button(18)[19] = RmLstC -- SEP001BD40B5XXX: Button(19)[20] = CallBack -- SEP001BD40B5XXX: Button(20)[21] = Barge -- SEP001BD40B5XXX: Button(21)[22] = DND -- SEP001BD40B5XXX: Button(22)[23] = No Park Number Available -- SEP001BD40B5XXX: Button(23)[24] = CallPark Reversion -- SEP001BD40B5XXX: Button(24)[25] = Service is not Active -- SEP001BD40B5XXX: Button(25)[26] = Empty -- SEP001BD40B5XXX: Button(26)[27] = ConfList -- SEP001BD40B5XXX: Button(27)[28] = Select -- SEP001BD40B5XXX: Button(28)[29] = Private -- SEP001BD40B5XXX: Button(29)[30] = TrnsfVM -- SEP001BD40B5XXX: Button(30)[31] = DirTrfr -- SEP001BD40B5XXX: Button(31)[32] = iDivert -- SEP001BD40B5XXX: >> Send message SoftKey Template Response -- SEP001BD40B5XXX: softkey count: 11 -- SEP001BD40B5XXX: TRANSFER is enabled -- SEP001BD40B5XXX: DND is disabled -- SEP001BD40B5XXX: PRIVATE is enabled -- SEP001BD40B5XXX: PARK is enabled -- SEP001BD40B5XXX: CFWDALL is disabled -- SEP001BD40B5XXX: CFWDBUSY is disabled -- SEP001BD40B5XXX: CFWDNOANSWER is disabled -- SEP001BD40B5XXX: TRNSFVM/IDIVERT is disabled -- SEP001BD40B5XXX: MEETME is disabled -- SEP001BD40B5XXX: PICKUPGROUP is disabled -- SEP001BD40B5XXX: PICKUPEXTEN is disabled -- SEP001BD40B5XXX: Set[0 ]= 0 :Redial 1 :NewCall 5 :DND -- SEP001BD40B5XXX: Set[1 ]= 0 :Hold 1 :EndCall 2 :Park 3 :Select -- SEP001BD40B5XXX: Set[2 ]= 0 :Resume 1 :NewCall 2 :EndCall 3 :Transfer 4 :Select 5 :DirTrfr -- SEP001BD40B5XXX: Set[3 ]= 0 :Answer 1 :EndCall -- SEP001BD40B5XXX: Set[4 ]= 0 :Redial 1 :EndCall 2 :Private -- SEP001BD40B5XXX: Set[5 ]= 0 :Hold 1 :EndCall 2 :Transfer 3 :Park 4 :Select 5 :DirTrfr -- SEP001BD40B5XXX: Set[6 ]= 0 :<< 1 :EndCall -- SEP001BD40B5XXX: Set[7 ]= 0 :Hold 1 :EndCall -- SEP001BD40B5XXX: Set[8 ]= 0 :EndCall 1 :Transfer -- SEP001BD40B5XXX: Set[9 ]= 0 :Redial 1 :EndCall -- SEP001BD40B5XXX: Set[10]= 0 :NewCall -- There are 11 SoftKeySets. -- SEP001BD40B5XXX: >> Send message SoftKey Set Response -- SEP001BD40B5XXX: Send softkeyset to On Hook(0) on line 0 and call 0 -- SEP001BD40B5XXX: >> Send message Select SoftKeys Message -- SEP001BD40B5XXX: >> Send message Config State Message -- SEP001BD40B5XXX: Sending ConfigStatMessage, lines 2, speeddials 0 -- SEP001BD40B5XXX: Device has 8 Capabilities -- SEP001BD40B5XXX: SCCP: 25 Wideband 256k AST: 0 unknown -- SEP001BD40B5XXX: SCCP: 4 G.711 u-law 64k AST: 4 G.711 u-law -- SEP001BD40B5XXX: SCCP: 2 G.711 A-law 64k AST: 8 G.711 A-law -- SEP001BD40B5XXX: SCCP: 15 G.729 Annex B AST: 0 unknown -- SEP001BD40B5XXX: SCCP: 16 G.729 Annex A + B AST: 0 unknown -- SEP001BD40B5XXX: SCCP: 11 G.729 AST: 0 unknown -- SEP001BD40B5XXX: SCCP: 12 G.729 Annex A AST: 256 G.729A -- SEP001BD40B5XXX: SCCP: 1 Non-standard codec AST: 0 unknown -- SEP001BD40B5XXX: Accessory 'Headset' is 'On Hook' (0) -- SEP001BD40B5XXX: Accessory 'Handset' is 'On Hook' (0) -- SEP001BD40B5XXX: Looking for line with instance 1. -- SEP001BD40B5XXX: button instance 1, type: 0 -- SCCP: Found line 02514193XXX -- SEP001BD40B5XXX: >> Send message Line State Message -- SEP001BD40B5XXX: Send Forward Status. Line: 02514193XXX -- SEP001BD40B5XXX: >> Send message Forward State Message -- SEP001BD40B5XXX: Got Forward Status Request. Line: 1 -- SEP001BD40B5XXX: Looking for line with instance 1. -- SEP001BD40B5XXX: button instance 1, type: 0 -- SCCP: Found line 02514193XXX -- SEP001BD40B5XXX: Send Forward Status. Line: 02514193XXX -- SEP001BD40B5XXX: >> Send message Forward State Message -- SEP001BD40B5XXX: Looking for line with instance 2. -- SEP001BD40B5XXX: button instance 1, type: 0 -- SEP001BD40B5XXX: button instance 2, type: 0 -- SCCP: Found line 02517129XXX -- SEP001BD40B5XXX: >> Send message Line State Message -- SEP001BD40B5XXX: Send Forward Status. Line: 02517129XXX -- SEP001BD40B5XXX: >> Send message Forward State Message -- SEP001BD40B5XXX: Got Forward Status Request. Line: 2 -- SEP001BD40B5XXX: Looking for line with instance 2. -- SEP001BD40B5XXX: button instance 1, type: 0 -- SEP001BD40B5XXX: button instance 2, type: 0 -- SCCP: Found line 02517129XXX -- SEP001BD40B5XXX: Send Forward Status. Line: 02517129XXX -- SEP001BD40B5XXX: >> Send message Forward State Message -- SEP001BD40B5XXX: >> Send message Define Time Date -- SEP001BD40B5XXX: Send date/time -- SEP001BD40B5XXX: >> Send message Set Lamp Message -- SEP001BD40B5XXX: >> Send message Display Notify Message -- SEP001BD40B5XXX: Display notify with timeout 5 -- SEP001BD40B5XXX: >> Send message Clear Prompt Status Message -- SEP001BD40B5XXX: Clear the status prompt on line 0 and callid 0 -- SEP001BD40B5XXX: >> Send message Display Dynamic Prompt Status Message -- SEP001BD40B5XXX: Display prompt on line 0, callid 0, timeout 0 -- SEP001BD40B5XXX: Send softkeyset to On Hook(0) on line 0 and call 0 -- SEP001BD40B5XXX: >> Send message Select SoftKeys Message -- SEP001BD40B5XXX: Post registration process... done! -- SEP001BD40B5XXX: Phone available lines 2 -- SEP001BD40B5XXX: Attaching line 02514193XXX with instance 1 to this device -- SEP001BD40B5XXX: sccp_device_find_index_for_line searching for 02514193XXX -- SEP001BD40B5XXX: sccp_device_find_index_for_line found: 1 -- SEP001BD40B5XXX: sccp_device_find_index_for_line return: 1 > notify asterisk to set state to sccp channelstate DOWN (0) => asterisk: Device is not in use (1) on channel SCCP/02514193XXX -- SEP001BD40B5XXX: Attaching line 02517129XXX with instance 2 to this device -- SEP001BD40B5XXX: sccp_device_find_index_for_line searching for 02517129XXX -- SEP001BD40B5XXX: sccp_device_find_index_for_line found: 2 -- SEP001BD40B5XXX: sccp_device_find_index_for_line return: 2 > notify asterisk to set state to sccp channelstate DOWN (0) => asterisk: Device is not in use (1) on channel SCCP/02517129XXX
Dann musst da eine Beschränkung sein.
sccp show globals
Bzgl default context bist du dir der Sicherheit in Verbindung mit sip bewusst?
Anbindung:T-DSL 768/128,Arcor DSL-Flat 2 MBit/256kbits
Router: Cisco 806
Server: Asterisk branch 1.8
Phone(s): Cisco 7970, Cisco 7971, Cisco 7906, Cisco 7912, Cisco 7921, Cisco 7940, iphone
channel: chan-sccp-b v4 DeveloperPreview
Provider: sipgate.de, sipphone.com
Ja natürlich, aber das kann ich ja später noch umstellen wenn alles vernünftig läuft. Ich weiß aber was du meinst.
Code:Platform byte order : LITTLE ENDIAN Protocol Version : 17 Server Name : Asterisk Bind Address : 178.77.72.XXX:2000 Nat : No Direct RTP : No Keepalive : 30 Debug : (1) core Date format : D.M.Y First digit timeout : 16 Digit timeout : 8 SCCP tos (signaling) : 104 SCCP cos (signaling) : 4 AUDIO tos (rtp) : 184 AUDIO cos (rtp) : 6 VIDEO tos (vrtp) : 136 VIDEO cos (vrtp) : 5 Context : default Language : Accountcode : Musicclass : AMA flags : 3 - DOCUMENTATION Callgroup : Pickupgroup : Capabilities : 0x10c (ulaw|alaw|g729) Codecs preference : (alaw|ulaw|g729) CFWDALL : No CFWBUSY : No CFWNOANSWER : No Call Events: : No DND : Reject Park : Enabled Private softkey : Enabled Echo cancel : Enabled Silence suppression : Disabled Trust phone ip : No Early RTP : No AutoAnswer ringtime : 0 AutoAnswer tone : 50 RemoteHangup tone : 50 Transfer tone : 0 CallWaiting tone : 45 Jitterbuffer enabled : No Jitterbuffer forced : No Jitterbuffer max size : -1 Jitterbuffer resync : -1 Jitterbuffer impl : Jitterbuffer log : No Jitterbuf target extra: -1
kannst du in der src/scc_actions.c folgende ersetzung durchführen:
durchCode:if(r->length < 56) { // registration request with protocol 0 version structure.
Code:if(r->length < 56 && d->protocolversion == 0) { // registration request with protocol 0 version structure.
Anbindung:T-DSL 768/128,Arcor DSL-Flat 2 MBit/256kbits
Router: Cisco 806
Server: Asterisk branch 1.8
Phone(s): Cisco 7970, Cisco 7971, Cisco 7906, Cisco 7912, Cisco 7921, Cisco 7940, iphone
channel: chan-sccp-b v4 DeveloperPreview
Provider: sipgate.de, sipphone.com
Ja habe ich gemacht, bringt aber keine Veränderung. Vom Server wird nach wie vor mit Protokollversion 12 geantwortet.
Hast du noch eine Idee? Gruß Markus
das phone mit der firmware macht nur 12, war von einer anderen version ausgegangen
Anbindung:T-DSL 768/128,Arcor DSL-Flat 2 MBit/256kbits
Router: Cisco 806
Server: Asterisk branch 1.8
Phone(s): Cisco 7970, Cisco 7971, Cisco 7906, Cisco 7912, Cisco 7921, Cisco 7940, iphone
channel: chan-sccp-b v4 DeveloperPreview
Provider: sipgate.de, sipphone.com
Hallo ich hab das selbe Problem mit 3.0 RC3.1
anbei sccp show device, sccp show globals und der Debug output von der Registrierung des Phones
Vielleicht kann ja wer licht in die Sache bringen.
Code:sccp show device SEP001F9E265283 Current settings for selected Device ------------------------------------ MAC-Address : SEP001F9EXXXXXX Protocol Version : Supported '20', In Use '20' Keepalive : 60 Registration state : OK(3) State : On Hook(0) MWI handset light : OFF Description : Sysadmin Config Phone Type : 7970 Skinny Phone Type : Cisco 7970(30006) Softkey support : Yes BTemplate support : Yes linesRegistered : Yes Image Version : P00405000700 Timezone Offset : 0 Capabilities : 0x10c (ulaw|alaw|g729) Codecs preference : (alaw|g729|gsm) DND Feature enabled: YES DND Status : Disabled Can Transfer : Yes Can Park : Yes Private softkey : Enabled Can CFWDALL : Yes Can CFWBUSY : Yes Can CFWNOANSWER : Yes Dtmf mode : In-Band Nat : No Videosupport? : No Direct RTP : No Trust phone ip : No Bind Address : XXX.XXX.XXX.XXX:52078 Early RTP : No Device State (Acc.): On Hook Last Used Accessory: Speaker Last dialed number : 23 PendingUpdate : No PendingDelete : NoCode:SCCP channel driver global settings ------------------------------------ Platform byte order : LITTLE ENDIAN Protocol Version : 20 Server Name : Asterisk Bind Address : XXX.XXX.XXX.XXX:2000 Nat : No Direct RTP : No Keepalive : 60 Debug : (1) core Date format : D.M.Y First digit timeout : 16 Digit timeout : 8 SCCP tos (signaling) : 104 SCCP cos (signaling) : 4 AUDIO tos (rtp) : 184 AUDIO cos (rtp) : 6 VIDEO tos (vrtp) : 136 VIDEO cos (vrtp) : 5 Context : sccp Language : at Accountcode : Musicclass : default AMA flags : 3 - DOCUMENTATION Callgroup : Pickupgroup : Capabilities : 0x10a (gsm|alaw|g729) Codecs preference : (alaw|g729|gsm) CFWDALL : Yes CFWBUSY : Yes CFWNOANSWER : Yes Call Events: : No DND : Reject Park : Enabled Private softkey : Enabled Echo cancel : Enabled Silence suppression : Disabled Trust phone ip : No Early RTP : Yes AutoAnswer ringtime : 1 AutoAnswer tone : 50 RemoteHangup tone : 50 Transfer tone : 50 CallWaiting tone : 45 Registration Context : Jitterbuffer enabled : Yes Jitterbuffer forced : No Jitterbuffer max size : 300 Jitterbuffer resync : -1 Jitterbuffer impl : adaptive Jitterbuffer log : Yes Jitterbuf target extra: -1Code:SCCP: Accepted connection from XXX.XXX.XXX.XXX -- SCCP: Using ip XXX.XXX.XXX.XXX [Jun 24 02:50:53] WARNING[32307]: sccp_socket.c:87 sccp_read_data: SCCP: read() returned zero length. Assuming closed connection. -- SCCP: Accepted connection from XXX.XXX.XXX.XXX -- SCCP: Using ip XXX.XXX.XXX.XXX SEP001F9EXXXXXX: is registering, Instance: 0, Type: Cisco 7970 (30006), Version: 20 -- SEP001F9EXXXXXX: Allocating device to session (29) XXX.XXX.XXX.XXX -- SEP001F9EXXXXXX: Ask the phone to send keepalive message every 41 seconds -- SEP001F9EXXXXXX: asked our protocol capability (20). We answered (20). -- SEP001F9EXXXXXX: Building button template Cisco 7970(30006), user config 7970 -- SEP001F9EXXXXXX: >> Send message Button Template Message -- SEP001F9EXXXXXX: Button(0)[ 1] = Redial -- SEP001F9EXXXXXX: Button(1)[ 2] = NewCall -- SEP001F9EXXXXXX: Button(2)[ 3] = Hold -- SEP001F9EXXXXXX: Button(3)[ 4] = Transfer -- SEP001F9EXXXXXX: Button(4)[ 5] = CFwdALL -- SEP001F9EXXXXXX: Button(5)[ 6] = CFwdBusy -- SEP001F9EXXXXXX: Button(6)[ 7] = CFwdNoAnswer -- SEP001F9EXXXXXX: Button(7)[ 8] = << -- SEP001F9EXXXXXX: Button(8)[ 9] = EndCall -- SEP001F9EXXXXXX: Button(9)[10] = Resume -- SEP001F9EXXXXXX: Button(10)[11] = Answer -- SEP001F9EXXXXXX: Button(11)[12] = Info -- SEP001F9EXXXXXX: Button(12)[13] = Confrn -- SEP001F9EXXXXXX: Button(13)[14] = Park -- SEP001F9EXXXXXX: Button(14)[15] = Join -- SEP001F9EXXXXXX: Button(15)[16] = MeetMe -- SEP001F9EXXXXXX: Button(16)[17] = PickUp -- SEP001F9EXXXXXX: Button(17)[18] = GPickUp -- SEP001F9EXXXXXX: Button(18)[19] = RmLstC -- SEP001F9EXXXXXX: Button(19)[20] = CallBack -- SEP001F9EXXXXXX: Button(20)[21] = Barge -- SEP001F9EXXXXXX: Button(21)[22] = DND -- SEP001F9EXXXXXX: Button(22)[23] = ConfList -- SEP001F9EXXXXXX: Button(23)[24] = Select -- SEP001F9EXXXXXX: Button(24)[25] = Private -- SEP001F9EXXXXXX: Button(25)[26] = TrnsfVM -- SEP001F9EXXXXXX: Button(26)[27] = DirTrfr -- SEP001F9EXXXXXX: Button(27)[28] = iDivert -- SEP001F9EXXXXXX: Button(28)[29] = Video Mode -- SEP001F9EXXXXXX: Button(29)[30] = Intrcpt -- SEP001F9EXXXXXX: Button(30)[31] = Empty -- SEP001F9EXXXXXX: >> Send message SoftKey Template Response -- SEP001F9EXXXXXX: searching for softkeyset: softkeyset! -- SEP001F9EXXXXXX: using softkeyset: softkeyset! -- SEP001F9EXXXXXX: d->softkeyDefinition=softkeyset! -- SEP001F9EXXXXXX: softkey count: 11 -- SEP001F9EXXXXXX: TRANSFER is enabled -- SEP001F9EXXXXXX: DND is disabled -- SEP001F9EXXXXXX: PRIVATE is enabled -- SEP001F9EXXXXXX: PARK is enabled -- SEP001F9EXXXXXX: CFWDALL is enabled -- SEP001F9EXXXXXX: CFWDBUSY is enabled -- SEP001F9EXXXXXX: CFWDNOANSWER is enabled -- SEP001F9EXXXXXX: TRNSFVM/IDIVERT is enabled -- SEP001F9EXXXXXX: MEETME is enabled -- SEP001F9EXXXXXX: PICKUPGROUP is enabled -- SEP001F9EXXXXXX: PICKUPEXTEN is enabled -- SEP001F9EXXXXXX: Set[0 ]= 0 :Redial 1 :GPickUp 2 :PickUp 3 :NewCall 4 :CFwdALL 5 :DND -- SEP001F9EXXXXXX: Set[1 ]= 0 :Hold 1 :EndCall 2 :Park 3 :Select 4 :CFwdALL 5 :CFwdBusy 6 :iDivert -- SEP001F9EXXXXXX: Set[2 ]= 0 :Resume 1 :NewCall 2 :EndCall 3 :Transfer 4 :Empty 5 :Select 6 :DirTrfr 7 :iDivert -- SEP001F9EXXXXXX: Set[3 ]= 0 :Answer 1 :EndCall 2 :iDivert -- SEP001F9EXXXXXX: Set[4 ]= 0 :Redial 1 :EndCall 2 :Private 3 :CFwdALL 4 :CFwdBusy 5 :PickUp 6 :GPickUp 7 :MeetMe -- SEP001F9EXXXXXX: Set[5 ]= 0 :Hold 1 :EndCall 2 :Transfer 3 :Empty 4 :Park 5 :Select 6 :DirTrfr 7 :CFwdALL 8 :CFwdBusy -- SEP001F9EXXXXXX: Set[6 ]= 0 :<< 1 :EndCall -- SEP001F9EXXXXXX: Set[7 ]= 0 :Hold 1 :EndCall 2 :Join -- SEP001F9EXXXXXX: Set[8 ]= 0 :EndCall 1 :Transfer 2 :CFwdALL 3 :iDivert -- SEP001F9EXXXXXX: Set[9 ]= 0 :Redial 1 :EndCall -- SEP001F9EXXXXXX: Set[10]= 0 :PickUp -- There are 11 SoftKeySets. -- SEP001F9EXXXXXX: >> Send message SoftKey Set Response -- SEP001F9EXXXXXX: Send softkeyset to On Hook(0) on line 0 and call 0 -- SEP001F9EXXXXXX: >> Send message Select SoftKeys Message -- SEP001F9EXXXXXX: >> Send message Config State Message -- SEP001F9EXXXXXX: Sending ConfigStatMessage, lines 2, speeddials 5 -- SEP001F9EXXXXXX: Device has 8 Capabilities -- SEP001F9EXXXXXX: SCCP: 25 Wideband 256k AST: 0 unknown -- SEP001F9EXXXXXX: SCCP: 4 G.711 u-law 64k AST: 4 G.711 u-law -- SEP001F9EXXXXXX: SCCP: 2 G.711 A-law 64k AST: 8 G.711 A-law -- SEP001F9EXXXXXX: SCCP: 15 G.729 Annex B AST: 0 unknown -- SEP001F9EXXXXXX: SCCP: 16 G.729 Annex A + B AST: 0 unknown -- SEP001F9EXXXXXX: SCCP: 11 G.729 AST: 0 unknown -- SEP001F9EXXXXXX: SCCP: 12 G.729 Annex A AST: 256 G.729A -- SEP001F9EXXXXXX: SCCP: 1 Non-standard codec AST: 0 unknown -- SEP001F9EXXXXXX: Looking for line with instance 1. -- SEP001F9EXXXXXX: button instance 1, type: 0 -- SCCP: Found line 200 -- SEP001F9EXXXXXX: >> Send message Line State Message -- SEP001F9EXXXXXX: Send Forward Status. Line: 200 -- SEP001F9EXXXXXX: >> Send message Forward State Message -- SEP001F9EXXXXXX: Sent Forward Status. Line: 200 -- SEP001F9EXXXXXX: Got Forward Status Request. Line: 1 -- SEP001F9EXXXXXX: Looking for line with instance 1. -- SEP001F9EXXXXXX: button instance 1, type: 0 -- SCCP: Found line 200 -- SEP001F9EXXXXXX: Send Forward Status. Line: 200 -- SEP001F9EXXXXXX: >> Send message Forward State Message -- SEP001F9EXXXXXX: Sent Forward Status. Line: 200 -- SEP001F9EXXXXXX: Looking for line with instance 2. -- SEP001F9EXXXXXX: button instance 1, type: 0 -- SEP001F9EXXXXXX: button instance 2, type: 0 -- SCCP: Found line 2000 -- SEP001F9EXXXXXX: >> Send message Line State Message -- SEP001F9EXXXXXX: Send Forward Status. Line: 2000 -- SEP001F9EXXXXXX: >> Send message Forward State Message -- SEP001F9EXXXXXX: Sent Forward Status. Line: 2000 -- SEP001F9EXXXXXX: Got Forward Status Request. Line: 2 -- SEP001F9EXXXXXX: Looking for line with instance 2. -- SEP001F9EXXXXXX: button instance 1, type: 0 -- SEP001F9EXXXXXX: button instance 2, type: 0 -- SCCP: Found line 2000 -- SEP001F9EXXXXXX: Send Forward Status. Line: 2000 -- SEP001F9EXXXXXX: >> Send message Forward State Message -- SEP001F9EXXXXXX: Sent Forward Status. Line: 2000 -- SEP001F9EXXXXXX: >> Send message SpeedDial State Dynamic Message -- SEP001F9EXXXXXX: >> Send message SpeedDial State Dynamic Message -- SEP001F9EXXXXXX: >> Send message SpeedDial State Dynamic Message -- SEP001F9EXXXXXX: >> Send message SpeedDial State Dynamic Message -- SEP001F9EXXXXXX: Speed Dial Request for Button 5 -- SEP001F9EXXXXXX: >> Send message SpeedDial State Message -- SEP001F9EXXXXXX: >> Send message SpeedDial State Dynamic Message -- SEP001F9EXXXXXX: got FeatureChangeEvent 1 -- SEP001F9EXXXXXX: >> Send message Define Time Date -- SEP001F9EXXXXXX: Send date/time -- SEP001F9EXXXXXX: >> Send message Set Lamp Message -- SEP001F9EXXXXXX: Device does not support RegisterAvailableLinesMessage, force this -- SEP001F9EXXXXXX: Phone available lines 2 -- SEP001F9EXXXXXX: Attaching line 200 with instance 1 to this device -- SEP001F9EXXXXXX: sccp_device_find_index_for_line searching for 200 -- SEP001F9EXXXXXX: sccp_device_find_index_for_line found: 1 -- SEP001F9EXXXXXX: sccp_device_find_index_for_line return: 1 -- SEP001F9EXXXXXX: Attaching line 2000 with instance 2 to this device -- SEP001F9EXXXXXX: sccp_device_find_index_for_line searching for 2000 -- SEP001F9EXXXXXX: sccp_device_find_index_for_line found: 2 -- SEP001F9EXXXXXX: sccp_device_find_index_for_line return: 2 -- SEP001F9EXXXXXX: >> Send message Display Notify Message -- SEP001F9EXXXXXX: Display notify with timeout 5 -- SEP001F9EXXXXXX: >> Send message Clear Prompt Status Message -- SEP001F9EXXXXXX: Clear the status prompt on line 0 and callid 0 -- SEP001F9EXXXXXX: >> Send message Display Dynamic Prompt Status Message -- SEP001F9EXXXXXX: Display prompt on line 0, callid 0, timeout 0 -- SEP001F9EXXXXXX: Send softkeyset to On Hook(0) on line 0 and call 0 -- SEP001F9EXXXXXX: >> Send message Select SoftKeys Message -- SEP001F9EXXXXXX: Send softkeyset to On Hook(0) on line 1 and call 0 -- SEP001F9EXXXXXX: >> Send message Select SoftKeys Message -- SEP001F9EXXXXXX: >> Send message SpeedDial State Dynamic Message -- SEP001F9EXXXXXX: Send softkeyset to On Hook(0) on line 2 and call 0 -- SEP001F9EXXXXXX: >> Send message Select SoftKeys Message -- SEP001F9EXXXXXX: >> Send message SpeedDial State Dynamic Message -- SEP001F9EXXXXXX: Send softkeyset to On Hook(0) on line 3 and call 0 -- SEP001F9EXXXXXX: >> Send message Select SoftKeys Message -- SEP001F9EXXXXXX: >> Send message SpeedDial State Dynamic Message -- SEP001F9EXXXXXX: Send softkeyset to On Hook(0) on line 4 and call 0 -- SEP001F9EXXXXXX: >> Send message Select SoftKeys Message -- SEP001F9EXXXXXX: >> Send message SpeedDial State Dynamic Message -- SEP001F9EXXXXXX: Post registration process... done! -- SEP001F9EXXXXXX: Accessory 'Headset' is 'On Hook' (0) -- SEP001F9EXXXXXX: Accessory 'Handset' is 'On Hook' (0)
Kannst Du das Problem noch mal kurz erläutern?
Anbindung:T-DSL 768/128,Arcor DSL-Flat 2 MBit/256kbits
Router: Cisco 806
Server: Asterisk branch 1.8
Phone(s): Cisco 7970, Cisco 7971, Cisco 7906, Cisco 7912, Cisco 7921, Cisco 7940, iphone
channel: chan-sccp-b v4 DeveloperPreview
Provider: sipgate.de, sipphone.com
Für alle getätigten Anrufen steht in der "Placed Calls" liste nur "To Unknown Number" wenn ich auf Details drücke kann ich die Uhrzeit und die Dauer des Gesprächs sehen.
Berechtigungen
Zitieren