Ergebnis 1 bis 2 von 2

Thema: Cisco 7940 hinter Fritz!Box mit Sipgate.co.uk Team

  1. #1
    IPPF-Einsteiger
    Registriert seit
    10.04.2012
    Beiträge
    1

    Frage Cisco 7940 hinter Fritz!Box mit Sipgate.co.uk Team

    Good Morning,

    i try to Connect my Cisco 7940 to my Sipgate.co.uk TEAM Account behind my Fritz!Box. But the Cisco Phone cant Login to my Sipgate Account , i get the Error :

    Code:
    E640 REG msg unsupported: in 403, request failure
    Have you any idea for solve this Prob ?

    I have try to Connect the Fritz!Box directly to the Sip Account an it works very fine ;(

    -------------

    Guten Morgen,

    ich versuche mein Cisco 7940 hinter meiner Fritz!box mit meinem Sipgate.co.uk Team Account zu verbinden. Aber das Cisco Phone kann sich scheinbar nicht anmelden, ich bekomme folgende Fehlermeldung:

    Code:
    E640 REG msg unsupported: in 403, request failure
    Hat jemand eine Idee oder einen Vorschlag ?

    Wenn ich den SIP Zugang direkt in der FritzBox Konfiguriere dann funktioniert dieser tadelos.

    Anbei meine Konfigs.




    I have forwarded the following Port to the Cisco Phone:
    Code:
    SIP 1-1	UDP	5100-5109	     5100-5109		
    SIP 1-2	UDP	8001-8010	     8001-8010		
    SIP 1-3	UDP	10000-10005    10000-10005		
    SIP 1-4	UDP	16384-31766    16384-31766		
    SIP 1-5	UDP	5160-5170	     5160-5170

    My SIPDefault :

    Code:
    # SIP Default Generic Configuration File 
     
    # Image Version
    image_version: P0S3-08-2-00
    
    # Proxy Server
    proxy1_address: "proxy.live.sipgate.co.uk"	; Can be dotted IP or FQDN
    proxy2_address: ""		; Can be dotted IP or FQDN
    proxy3_address: ""		; Can be dotted IP or FQDN
    proxy4_address: ""		; Can be dotted IP or FQDN
    proxy5_address: ""		; Can be dotted IP or FQDN
    proxy6_address: ""		; Can be dotted IP or FQDN
    
    # Proxy Server Port (default - 5060)
    proxy1_port: 5160 
    proxy2_port: 5060 
    proxy3_port: 5060 
    proxy4_port: 5060 
    proxy5_port: 5060 
    proxy6_port: 5060 
    
    # Proxy Registration (0-disable (default), 1-enable)
    proxy_register: 1 
    
    # Phone Registration Expiration [1-3932100 sec] (Default - 3600)
    timer_register_expires: 600 
    
    # Codec for media stream (g711ulaw (default), g711alaw, g729a)
    preferred_codec: g711ulaw
    
    # TOS bits in media stream [0-5] (Default - 5)
    tos_media: 5
    
    # Inband DTMF Settings (0-disable, 1-enable (default))
    dtmf_inband: 1
    
    # Out of band DTMF Settings (none-disable, avt-avt enable (default), avt_always - always avt )
    dtmf_outofband: avt
    
    # DTMF dB Level Settings (1-6dB down, 2-3db down, 3-nominal (default), 4-3db up, 5-6dB up)
    dtmf_db_level: 3
    
    # SIP Timers
    timer_t1: 500 			; Default 500 msec
    timer_t2: 4000 			; Default 4 sec
    sip_retx: 10			; Default 10
    sip_invite_retx: 6 		; Default 6
    timer_invite_expires: 180 	; Default 180 sec
    
    ####### New Parameters added in Release 2.0 #######
    
    # Dialplan template (.xml format file relative to the TFTP root directory)
    dial_template: dialplan
    
    # TFTP Phone Specific Configuration File Directory
    tftp_cfg_dir: ""		; Example:  ./sip_phone/
     
    # Time Server (There are multiple values and configurations refer to Admin Guide for Specifics)
    sntp_server: "192.53.103.104"			; SNTP Server IP Address
    sntp_mode: unicast	; unicast, multicast, anycast, or directedbroadcast (default)
    time_zone: CET			; Time Zone Phone is in
    dst_offset: 1			; Offset from Phone's time when DST is in effect 
    dst_start_month: April		; Month in which DST starts
    dst_start_day: ""		; Day of month in which DST starts
    dst_start_day_of_week: Sun	; Day of week in which DST starts
    dst_start_week_of_month: 1	; Week of month in which DST starts
    dst_start_time: 02		; Time of day in which DST starts
    dst_stop_month: Oct		; Month in which DST stops
    dst_stop_day: ""		; Day of month in which DST stops
    dst_stop_day_of_week: Sunday	; Day of week in which DST stops
    dst_stop_week_of_month: 8	; Week of month in which DST stops 8=last week of month
    dst_stop_time: 2		; Time of day in which DST stops
    dst_auto_adjust: 1		; Enable(1-Default)/Disable(0) DST automatic adjustment
    time_format_24hr: 1		; Enable(1 - 24Hr Default)/Disable(0 - 12Hr)
    
    # Do Not Disturb Control (0-off, 1-on, 2-off with no user control, 3-on with no user control)
    dnd_control: 0			; Default 0 (Do Not Disturb feature is off)
    
    # Caller ID Blocking (0-disbaled, 1-enabled, 2-disabled no user control, 3-enabled no user control)
    callerid_blocking: 0		; Default 0 (Disable sending all calls as anonymous) 
    
    # Anonymous Call Blocking (0-disabled, 1-enabled, 2-disabled no user control, 3-enabled no user control)
    anonymous_call_block: 0		; Default 0 (Disable blocking of anonymous calls)
    
    # DTMF AVT Payload (Dynamic payload range for AVT tones - 96-127)
    dtmf_avt_payload: 101		; Default 101
    
    # Sync value of the phone used for remote reset 
    sync: 1				; Default 1
    
    ####### New Parameters added in Release 2.1 #######
    
    # Backup Proxy Support
    proxy_backup: "217.10.79.23"	; Dotted IP of Backup Proxy
    proxy_backup_port: 5161		; Backup Proxy port (default is 5060)
    
    # Emergency Proxy Support
    proxy_emergency: "217.10.79.23" 	; Dotted IP of Emergency Proxy
    proxy_emergency_port: 5161	; Emergency Proxy port (default is 5060)
    
    # Configurable VAD option
    enable_vad: 0			; VAD setting 0-disable (Default), 1-enable
    
    ####### New Parameters added in Release 2.2 ######
    
    # NAT/Firewall Traversal
    nat_enable: 1                   ; 0-Disabled (default), 1-Enabled
    nat_address: ""	; WAN IP address of NAT box (dotted IP or DNS A record only)
    voip_control_port: 5161      	; UDP port used for SIP messages (default - 5060)
    start_media_port: 16384 	; Start RTP range for media (default - 16384)
    end_media_port: 32766   	; End RTP range for media (default - 32766)
    nat_received_processing: 1	; 0-Disabled (default), 1-Enabled
    
    # Outbound Proxy Support
    outbound_proxy: "proxy.live.sipgate.co.uk"	; restricted to dotted IP or DNS A record only
    outbound_proxy_port: 5161       ; default is 5060
    
    ####### New Parameter added in Release 3.0 #######
    
    # Allow for the bridge on a 3way call to join remaining parties upon hangup
    cnf_join_enable : 1		; 0-Disabled, 1-Enabled (default)
    
    ####### New Parameters added in Release 3.1 #######
    
    # Allow Transfer to be completed while target phone is still ringing
    semi_attended_transfer: 1	; 0-Disabled, 1-Enabled (default)
    
    # Telnet Level (enable or disable the ability to telnet into the phone) 
    telnet_level: 2			; 0-Disabled (default), 1-Enabled, 2-Privileged
    
    ####### New Parameters added in Release 4.0 #######
    
    # XML URLs
    services_url: ""		; URL for external Phone Services
    directory_url: ""		; URL for external Directory location
    logo_url: ""			; URL for branding logo to be used on phone display
    
    # HTTP Proxy Support
    http_proxy_addr: ""		; Address of HTTP Proxy server
    http_proxy_port: 80		; Port of HTTP Proxy Server (80-default)
    
    # Dynamic DNS/TFTP Support
    dyn_dns_addr_1: ""              ; restricted to dotted IP
    dyn_dns_addr_2: ""              ; restricted to dotted IP
    dyn_tftp_addr: ""               ; restricted to dotted IP
    
    # Remote Party ID
    remote_party_id: 0		; 0-Disabled (default), 1-Enabled
    
    ####### New Parameters added in Release 4.4 #######
    
    # Call Hold Ringback (0-off, 1-on, 2-off with no user control, 3-on with no user control)
    call_hold_ringback: 0		; Default 0 (Call Hold Ringback feature is off)
    
    ####### New Parameters added in Release 6.0 #######
    
    # Dialtone Stutter for MWI 
    stutter_msg_waiting: 0		; 0-Disabled (default), 1-Enabled
    
    # RTP Call Statistics (SIP BYE/200 OK message exchange)
    call_stats: 0			; 0-Disabled (default), 1-Enabled
    my SIP##MAC##

    Code:
    # SIP Configuration Generic File 
     
    # Line 1
    line1_name: "SIP ID"
    # SIP ID = ID form the Device in the SIP credentials form the Sipgate Team Administartion it's like "12345657e1"
    line1_authname: "SIP ID"
    line1_password: "PW"
    line1_displayname: "Number"
    line1_shortname: "Test"
    
    
    ####### New Parameters added in Release 2.0 #######
    
    # All user_parameters have been removed
    
    # Phone Label (Text desired to be displayed in upper right corner)
    phone_label: "7940"	; Has no effect on SIP messaging
    
    # Line 1 Display Name (Display name to use for SIP messaging)
    line1_displayname: "Number"
    
    # Line 2 Display Name (Display name to use for SIP messaging)
    line2_displayname: ""
    
    
    ####### New Parameters added in Release 3.0 ######
    
    # Phone Prompt (The prompt that will be displayed on console and telnet)
    phone_prompt:   "SIP Phone"      ; Limited to 15 characters (Default - SIP Phone) 
    
    # Phone Password (Password to be used for console or telnet login)
    phone_password: "cisco" ; Limited to 31 characters (Default - cisco)
    
    # User classifcation used when Registering [ none(default), phone, ip ]
    user_info: none

  2. #2
    IPPF-Tausend-VIP Avatar von inquisitor
    Registriert seit
    07.08.2004
    Beiträge
    1.418
    Your SIPMAC.conf seems to lack a SIP server address. The following config works for me:
    Code:
    line2_name: "12345657e1"
    line2_shortname: "sipgate.de"
    line2_authname: "12345657e1"
    line2_password: "yourpassword"
    line2_displayname: "patricks2012"
    proxy2_port: "5060"
    proxy2_address: "sipgate.de"

    Hardware 1: AVM Fritz!Box 7390 (84.05.50) + Huawei K3765 (GSM Gateway)
    Hardware 2: AVM Fritz!Box 7390 (84.05.50)
    Anbindung 1: KabelBW CleverKabel Internet 32 + Speed Option (Bandbreite: 100/2.5 MBit/s)
    Anbindung 2: KabelBW CleverInternet (Bandbreite: 50/2.5 MBit/s)
    Endgeräte 1: Cisco Unified IP Phone 7960, 2x Speedphone 300 | Samsung SCX-4828FN | Synology DS212j
    Endgeräte 2: 3x T-Sinus 501, Gigaset C47H, Gigaset SL1 | Brother MFC-7360N | Slingbox Solo | Netgear Powerline XAV2501 + XAV1004 + XAV101
    Mods: Telnet (#96*7*) | Debranding | ENUM
    VoIP: sipgate.de | InterVoip | sipcall.ch | sipgate.co.uk | UKDDI.com | ipkall.com | megafon.bg | ENUM (e164.arpa kostenlos via portunity.de)
    Mobil: Huawei P6, Nokia Lumia 630 Dual SIM; Huawei: E5832S, E1762; Qualcomm Gobi 2000 in Sony VAIO VPC-Z12X9E/X |

Ähnliche Themen

  1. Cisco 7940 & 7960 direkt an Sipgate "Team"
    Von dubmaker im Forum Cisco
    Antworten: 0
    Letzter Beitrag: 30.11.2010, 13:58
  2. Cisco 7940 für SipGate hinter Fritzbox
    Von xedus im Forum Cisco
    Antworten: 6
    Letzter Beitrag: 07.03.2010, 19:50
  3. Cisco 7940 & sipgate-Account
    Von pbundschuh im Forum Cisco
    Antworten: 2
    Letzter Beitrag: 27.09.2005, 18:00
  4. Cisco 7940 und Sipgate
    Von mick666 im Forum Cisco
    Antworten: 50
    Letzter Beitrag: 04.01.2005, 14:11
  5. Nochmal Cisco 7940 und Sipgate
    Von im Forum Cisco
    Antworten: 21
    Letzter Beitrag: 12.12.2004, 17:16

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •