Schritt 13.2.: Bearbeiten der Konfigurations-Datei / Einrichtung der Internet-Telefonnummern
Im Folgendem werden die Voip-Telefonnummern in die *.export-Datei geschrieben. Alle hier erwähnten Einstellungen sind auch von diesem Beitrag übernommen worden.
Bitte beachten und im Hinterkopf behalten:
- Alle Telefonnummern werden in der *.export-Datei unter dem Abschnitt voipcfg {...} konfiguriert.
- Sollte dieser Abschnitt nicht zu finden sein, bitte in der Fritz-Weboberfläche irgendeine Nummer anlegen, um dannach die *.export-Datei zu modifizieren.
- Jede einzelne Telefonnummer wird innerhalb dieses Abschnittes unter ua1{...}, ua2{...} usw. hinterlegt und konfiguriert. Je nachdem, wie viele Nummern man hat.
- Wenn man nur eine hat, kann man also den Rest (ua2{...}, ua3{...} usw.) auslassen.
- Das sieht zwar kompliziert aus, wird aber beim modifizieren klar.
In diesem Beispiel gehen wir von 3 Telefonnummern aus.
1. Wir öffnen mit Notepad++, folgende 3 Dateien.
- die unter 13.1. bereits bearbeitete *.export-Datei
- Kennungen+Account-Daten_xxx.txt <-- zu finden im Ordner ruKernelTool/Log-Dateien
- Konfigurations-Dateien_(Kennungen lesbar)_xxx.txt <-- zu finden im Ordner ruKernelTool/Log-Dateien
2. Hier nun die Änderungen die in die *.export-Datei müssen, einfach nach den jeweilgen Schlüsselwörtern mit STRG+F suchen um die richtigen Stellen zu finden. Es ist wichtig, dass ihr die genau sucht, da manche Werte mehrfach vorkommen. Alle zu ändernden Werte sind rot markiert. Wenn die rot markierten Zeilen nicht vorhanden sind, einfach an der richtigen Stelle einfügen. Ansonsten die vorhandenen Zeilen dadurch ersetzen.
Wir suchen nun nach:
Code:
voipcfg {
dnsport = 7077;
rtpport_start = 7078;
sip_srcport = 5060;
ua1 {
- ua1 steht, wie ihr ja oben gelernt habt für Telefonnumer 1 und deren Einstellungen.
- Die gesamten Einstellungen für diese eine Nummer sind zwischen ua1 {...} gesetzt.
Demnach bitte folgende Einstellungen, die innerhalb dieser geschweiften Klammern stehen, ändern.
Am Ende sollte die erste Telefonnummer, wie folgt eingestellt sein:
Telefon-Nummer 1
Code:
ua1 {
enabled = yes;
username = "TELEFONNUMMER 1 MIT VORWAHL";
authname = "";
passwd = "DAS 32 STELLIGE PASSWORT ZUR TEL.NR.: 1 AUS DER LOG.TXT";
registrar = "AUS DER LOG.TXT ENTNEHMEN";
ttl = 75m;
sipping_enabled = no;
sipping_interval = 280s;
name = "TELEFONNUMMER 1 MIT VORWAHL";
providernae = "";
with_displayname = no;
dtmfcfg = dtmfcfg_rtp_or_inband;
register_failwait = 0w;
register_failwaitmax = 30m;
stunserver = "";
stunserverport = 3478;
use_internat_calling_numb = no;
is_nat_aware = no;
localip = 0.0.0.0;
ignore_received_header = no;
always_clir = no;
clirtype = clir_star31star;
colptype = colp_privacy_id;
clipnstype = clipns_off;
vad_enabled = no;
only_one_dialog = no;
presence_supported = no;
mwi_supported = no;
ccbs_supported = no;
reg_support = regsupport_auto;
packetization = packetization_fixed;
tx_packetsize_in_ms = 20;
xrtp_periodic = 0;
reject_refer = yes;
no_register_fetch = yes;
do_not_register = no;
only_call_from_registrar = no;
invite_without_register_allowed = no;
outboundproxy = "*...siehe weiter unten";
outboundproxy_without_route_header = no;
dditype = ddi_none;
ddireception = "";
alias_head_number = "";
backup_wanted = no;
use_session_timer = no;
use_rport = yes;
add_rtpmap_for_all_codecs = no;
answer_only_one_codec = no;
without_annexb_no = no;
srtp_supported = no;
use_488_for_no_t38 = no;
g726_via_rfc3551 = no;
no_g726_32_offer_with_pt2 = no;
enable_3xx = yes;
t38_reinvite_from_remote = no;
use_t38version0 = no;
rtcp_xr_media_attribute = no;
read_p_asserted_identity_header = no;
route_always_over_internet = no;
gui_readonly = no;
}
use_audiocodecs = no;
audiocodecs = "PCMA", "PCMU", "G726-32";
verbose = no;
capi_blocksize_in_ms = 30;
sip_prio = 46;
rtp_prio = 46;
dyn_codecs = yes;
prio_low_codec = no;
send_ringtone = no;
t38_support_enabled = no;
enum_support_enabled = no;
bandwidth_to_leave_KBits = 0;
dialoglimit = 0;
enumdomains = "e164.arpa", "e164.org", "openenum.eu";
rtpstream {
voice_activity_detection {
vad_enabled = vadenabled_no;
vad_threshold = 10000;
}
plc {
in_the_stack = yes;
}
jitter {
auto_on = yes;
in_ms = 60;
in_packets = 0;
}
rtcp_enabled = yes;
silence_detection = no;
}
voip_assi_enabled = no;
extensions {
enabled = no;
username = "";
authname = "";
passwd = "";
extension_number = 620;
reg_from_outside = no;
gsm_tethering = no;
tx_packetsize_in_ms = 0;
}
zu *...siehe weiter unten: Ich habe Rainer schon gebeten, den outboundproxy mit in Kennungen+Account-Daten_xxx.txt zu übernehmen. Leider steht er derzeit nicht mit drin. Diesen findet ihr aber, wenn ihr in der Konfigurations-Dateien_(Kennungen lesbar)_xxx.txt einfach mit STRG+F nach outboundproxy sucht. Dort steht so was, wie registrar6456.sip.alice.de. Diesen dann übernehmen.
Wir nehmen ja an, dass wir 3 Telefonnummern haben. Daher müssen folgende Einstellungen ebenso übernommen werden.
Telefon-Nummer 2
Code:
ua2 {
enabled = yes;
username = "TELEFONNUMMER 2 MIT VORWAHL";
authname = "";
passwd = "DAS 32 STELLIGE PASSWORT ZUR TEL.NR.: 2 AUS DER LOG.TXT";
registrar = "AUS DER LOG.TXT ENTNEHMEN";
ttl = 75m;
sipping_enabled = no;
sipping_interval = 280s;
name = "TELEFONNUMMER 2 MIT VORWAHL";
providernae = "";
with_displayname = no;
dtmfcfg = dtmfcfg_rtp_or_inband;
register_failwait = 0w;
register_failwaitmax = 30m;
stunserver = "";
stunserverport = 3478;
use_internat_calling_numb = no;
is_nat_aware = no;
localip = 0.0.0.0;
ignore_received_header = no;
always_clir = no;
clirtype = clir_star31star;
colptype = colp_privacy_id;
clipnstype = clipns_off;
vad_enabled = no;
only_one_dialog = no;
presence_supported = no;
mwi_supported = no;
ccbs_supported = no;
reg_support = regsupport_auto;
packetization = packetization_fixed;
tx_packetsize_in_ms = 20;
xrtp_periodic = 0;
reject_refer = yes;
no_register_fetch = yes;
do_not_register = no;
only_call_from_registrar = no;
invite_without_register_allowed = no;
outboundproxy = "*...siehe weiter oben";
outboundproxy_without_route_header = no;
dditype = ddi_none;
ddireception = "";
alias_head_number = "";
backup_wanted = no;
use_session_timer = no;
use_rport = yes;
add_rtpmap_for_all_codecs = no;
answer_only_one_codec = no;
without_annexb_no = no;
srtp_supported = no;
use_488_for_no_t38 = no;
g726_via_rfc3551 = no;
no_g726_32_offer_with_pt2 = no;
enable_3xx = yes;
t38_reinvite_from_remote = no;
use_t38version0 = no;
rtcp_xr_media_attribute = no;
read_p_asserted_identity_header = no;
route_always_over_internet = no;
gui_readonly = no;
}
use_audiocodecs = no;
audiocodecs = "PCMA", "PCMU", "G726-32";
verbose = no;
capi_blocksize_in_ms = 30;
sip_prio = 46;
rtp_prio = 46;
dyn_codecs = yes;
prio_low_codec = no;
send_ringtone = no;
t38_support_enabled = no;
enum_support_enabled = no;
bandwidth_to_leave_KBits = 0;
dialoglimit = 0;
enumdomains = "e164.arpa", "e164.org", "openenum.eu";
rtpstream {
voice_activity_detection {
vad_enabled = vadenabled_no;
vad_threshold = 10000;
}
plc {
in_the_stack = yes;
}
jitter {
auto_on = yes;
in_ms = 60;
in_packets = 0;
}
rtcp_enabled = yes;
silence_detection = no;
}
voip_assi_enabled = no;
extensions {
enabled = no;
username = "";
authname = "";
passwd = "";
extension_number = 620;
reg_from_outside = no;
gsm_tethering = no;
tx_packetsize_in_ms = 0;
}
...und...
Telefon-Nummer 3
Code:
ua3 {
enabled = yes;
username = "TELEFONNUMMER 3 MIT VORWAHL";
authname = "";
passwd = "DAS 32 STELLIGE PASSWORT ZUR TEL.NR.: 3 AUS DER LOG.TXT";
registrar = "AUS DER LOG.TXT ENTNEHMEN";
ttl = 75m;
sipping_enabled = no;
sipping_interval = 280s;
name = "TELEFONNUMMER 3 MIT VORWAHL";
providernae = "";
with_displayname = no;
dtmfcfg = dtmfcfg_rtp_or_inband;
register_failwait = 0w;
register_failwaitmax = 30m;
stunserver = "";
stunserverport = 3478;
use_internat_calling_numb = no;
is_nat_aware = no;
localip = 0.0.0.0;
ignore_received_header = no;
always_clir = no;
clirtype = clir_star31star;
colptype = colp_privacy_id;
clipnstype = clipns_off;
vad_enabled = no;
only_one_dialog = no;
presence_supported = no;
mwi_supported = no;
ccbs_supported = no;
reg_support = regsupport_auto;
packetization = packetization_fixed;
tx_packetsize_in_ms = 20;
xrtp_periodic = 0;
reject_refer = yes;
no_register_fetch = yes;
do_not_register = no;
only_call_from_registrar = no;
invite_without_register_allowed = no;
outboundproxy = "*...siehe weiter unten";
outboundproxy_without_route_header = no;
dditype = ddi_none;
ddireception = "";
alias_head_number = "";
backup_wanted = no;
use_session_timer = no;
use_rport = yes;
add_rtpmap_for_all_codecs = no;
answer_only_one_codec = no;
without_annexb_no = no;
srtp_supported = no;
use_488_for_no_t38 = no;
g726_via_rfc3551 = no;
no_g726_32_offer_with_pt2 = no;
enable_3xx = yes;
t38_reinvite_from_remote = no;
use_t38version0 = no;
rtcp_xr_media_attribute = no;
read_p_asserted_identity_header = no;
route_always_over_internet = no;
gui_readonly = no;
}
use_audiocodecs = no;
audiocodecs = "PCMA", "PCMU", "G726-32";
verbose = no;
capi_blocksize_in_ms = 30;
sip_prio = 46;
rtp_prio = 46;
dyn_codecs = yes;
prio_low_codec = no;
send_ringtone = no;
t38_support_enabled = no;
enum_support_enabled = no;
bandwidth_to_leave_KBits = 0;
dialoglimit = 0;
enumdomains = "e164.arpa", "e164.org", "openenum.eu";
rtpstream {
voice_activity_detection {
vad_enabled = vadenabled_no;
vad_threshold = 10000;
}
plc {
in_the_stack = yes;
}
jitter {
auto_on = yes;
in_ms = 60;
in_packets = 0;
}
rtcp_enabled = yes;
silence_detection = no;
}
voip_assi_enabled = no;
extensions {
enabled = no;
username = "";
authname = "";
passwd = "";
extension_number = 620;
reg_from_outside = no;
gsm_tethering = no;
tx_packetsize_in_ms = 0;
}
ua1 {
enabled = yes;
username = "TELEFONNUMMER 1 MIT VORWAHL";
authname = "";
passwd = "DAS 32 STELLIGE PASSWORT ZUR TEL.NR.: 1 AUS DER LOG.TXT";
registrar = "AUS DER LOG.TXT ENTNEHMEN";
ttl = 75m;
sipping_enabled = no;
sipping_interval = 280s;
name = "TELEFONNUMMER 1 MIT VORWAHL";
providernae = "";
with_displayname = no;
dtmfcfg = dtmfcfg_rtp_or_inband;
register_failwait = 0w;
register_failwaitmax = 30m;
stunserver = "";
stunserverport = 3478;
use_internat_calling_numb = no;
is_nat_aware = no;
localip = 0.0.0.0;
ignore_received_header = no;
always_clir = no;
clirtype = clir_star31star;
colptype = colp_privacy_id;
clipnstype = clipns_off;
vad_enabled = no;
only_one_dialog = no;
presence_supported = no;
mwi_supported = no;
ccbs_supported = no;
reg_support = regsupport_auto;
packetization = packetization_fixed;
tx_packetsize_in_ms = 20;
xrtp_periodic = 0;
reject_refer = yes;
no_register_fetch = yes;
do_not_register = no;
only_call_from_registrar = no;
invite_without_register_allowed = no;
outboundproxy = "*...siehe weiter oben";
outboundproxy_without_route_header = no;
dditype = ddi_none;
ddireception = "";
alias_head_number = "";
backup_wanted = no;
use_session_timer = no;
use_rport = yes;
add_rtpmap_for_all_codecs = no;
answer_only_one_codec = no;
without_annexb_no = no;
srtp_supported = no;
use_488_for_no_t38 = no;
g726_via_rfc3551 = no;
no_g726_32_offer_with_pt2 = no;
enable_3xx = yes;
t38_reinvite_from_remote = no;
use_t38version0 = no;
rtcp_xr_media_attribute = no;
read_p_asserted_identity_header = no;
route_always_over_internet = no;
gui_readonly = no;
}
use_audiocodecs = no;
audiocodecs = "PCMA", "PCMU", "G726-32";
verbose = no;
capi_blocksize_in_ms = 30;
sip_prio = 46;
rtp_prio = 46;
dyn_codecs = yes;
prio_low_codec = no;
send_ringtone = no;
t38_support_enabled = no;
enum_support_enabled = no;
bandwidth_to_leave_KBits = 0;
dialoglimit = 0;
enumdomains = "e164.arpa", "e164.org", "openenum.eu";
rtpstream {
voice_activity_detection {
vad_enabled = vadenabled_no;
vad_threshold = 10000;
}
plc {
in_the_stack = yes;
}
jitter {
auto_on = yes;
in_ms = 60;
in_packets = 0;
}
rtcp_enabled = yes;
silence_detection = no;
}
voip_assi_enabled = no;
extensions {
enabled = no;
username = "";
authname = "";
passwd = "";
extension_number = 620;
reg_from_outside = no;
gsm_tethering = no;
tx_packetsize_in_ms = 0;
}
Alle 3 Telefon-Nummern, also ua1{...}, ua2{...} und ua3{...} werden untereinander eingefügt. Der gesamte Abschnit sieht dann, wie folgt aus:
Code:
voipcfg {
dnsport = 7077;
rtpport_start = 7078;
sip_srcport = 5060;
ua1 {
enabled = yes;
username = "TELEFONNUMMER 1 MIT VORWAHL";
authname = "";
passwd = "DAS 32 STELLIGE PASSWORT ZUR TEL.NR.: 1 AUS DER LOG.TXT";
registrar = "AUS DER LOG.TXT ENTNEHMEN";
ttl = 75m;
sipping_enabled = no;
sipping_interval = 280s;
name = "TELEFONNUMMER 1 MIT VORWAHL";
providernae = "";
with_displayname = no;
dtmfcfg = dtmfcfg_rtp_or_inband;
register_failwait = 0w;
register_failwaitmax = 30m;
stunserver = "";
stunserverport = 3478;
use_internat_calling_numb = no;
is_nat_aware = no;
localip = 0.0.0.0;
ignore_received_header = no;
always_clir = no;
clirtype = clir_star31star;
colptype = colp_privacy_id;
clipnstype = clipns_off;
vad_enabled = no;
only_one_dialog = no;
presence_supported = no;
mwi_supported = no;
ccbs_supported = no;
reg_support = regsupport_auto;
packetization = packetization_fixed;
tx_packetsize_in_ms = 20;
xrtp_periodic = 0;
reject_refer = yes;
no_register_fetch = yes;
do_not_register = no;
only_call_from_registrar = no;
invite_without_register_allowed = no;
outboundproxy = "*...siehe weiter unten";
outboundproxy_without_route_header = no;
dditype = ddi_none;
ddireception = "";
alias_head_number = "";
backup_wanted = no;
use_session_timer = no;
use_rport = yes;
add_rtpmap_for_all_codecs = no;
answer_only_one_codec = no;
without_annexb_no = no;
srtp_supported = no;
use_488_for_no_t38 = no;
g726_via_rfc3551 = no;
no_g726_32_offer_with_pt2 = no;
enable_3xx = yes;
t38_reinvite_from_remote = no;
use_t38version0 = no;
rtcp_xr_media_attribute = no;
read_p_asserted_identity_header = no;
route_always_over_internet = no;
gui_readonly = no;
}
use_audiocodecs = no;
audiocodecs = "PCMA", "PCMU", "G726-32";
verbose = no;
capi_blocksize_in_ms = 30;
sip_prio = 46;
rtp_prio = 46;
dyn_codecs = yes;
prio_low_codec = no;
send_ringtone = no;
t38_support_enabled = no;
enum_support_enabled = no;
bandwidth_to_leave_KBits = 0;
dialoglimit = 0;
enumdomains = "e164.arpa", "e164.org", "openenum.eu";
rtpstream {
voice_activity_detection {
vad_enabled = vadenabled_no;
vad_threshold = 10000;
}
plc {
in_the_stack = yes;
}
jitter {
auto_on = yes;
in_ms = 60;
in_packets = 0;
}
rtcp_enabled = yes;
silence_detection = no;
}
voip_assi_enabled = no;
extensions {
enabled = no;
username = "";
authname = "";
passwd = "";
extension_number = 620;
reg_from_outside = no;
gsm_tethering = no;
tx_packetsize_in_ms = 0;
}
ua2 {
enabled = yes;
username = "TELEFONNUMMER 2 MIT VORWAHL";
authname = "";
passwd = "DAS 32 STELLIGE PASSWORT ZUR TEL.NR.: 2 AUS DER LOG.TXT";
registrar = "AUS DER LOG.TXT ENTNEHMEN";
ttl = 75m;
sipping_enabled = no;
sipping_interval = 280s;
name = "TELEFONNUMMER 2 MIT VORWAHL";
providernae = "";
with_displayname = no;
dtmfcfg = dtmfcfg_rtp_or_inband;
register_failwait = 0w;
register_failwaitmax = 30m;
stunserver = "";
stunserverport = 3478;
use_internat_calling_numb = no;
is_nat_aware = no;
localip = 0.0.0.0;
ignore_received_header = no;
always_clir = no;
clirtype = clir_star31star;
colptype = colp_privacy_id;
clipnstype = clipns_off;
vad_enabled = no;
only_one_dialog = no;
presence_supported = no;
mwi_supported = no;
ccbs_supported = no;
reg_support = regsupport_auto;
packetization = packetization_fixed;
tx_packetsize_in_ms = 20;
xrtp_periodic = 0;
reject_refer = yes;
no_register_fetch = yes;
do_not_register = no;
only_call_from_registrar = no;
invite_without_register_allowed = no;
outboundproxy = "*...siehe weiter oben";
outboundproxy_without_route_header = no;
dditype = ddi_none;
ddireception = "";
alias_head_number = "";
backup_wanted = no;
use_session_timer = no;
use_rport = yes;
add_rtpmap_for_all_codecs = no;
answer_only_one_codec = no;
without_annexb_no = no;
srtp_supported = no;
use_488_for_no_t38 = no;
g726_via_rfc3551 = no;
no_g726_32_offer_with_pt2 = no;
enable_3xx = yes;
t38_reinvite_from_remote = no;
use_t38version0 = no;
rtcp_xr_media_attribute = no;
read_p_asserted_identity_header = no;
route_always_over_internet = no;
gui_readonly = no;
}
use_audiocodecs = no;
audiocodecs = "PCMA", "PCMU", "G726-32";
verbose = no;
capi_blocksize_in_ms = 30;
sip_prio = 46;
rtp_prio = 46;
dyn_codecs = yes;
prio_low_codec = no;
send_ringtone = no;
t38_support_enabled = no;
enum_support_enabled = no;
bandwidth_to_leave_KBits = 0;
dialoglimit = 0;
enumdomains = "e164.arpa", "e164.org", "openenum.eu";
rtpstream {
voice_activity_detection {
vad_enabled = vadenabled_no;
vad_threshold = 10000;
}
plc {
in_the_stack = yes;
}
jitter {
auto_on = yes;
in_ms = 60;
in_packets = 0;
}
rtcp_enabled = yes;
silence_detection = no;
}
voip_assi_enabled = no;
extensions {
enabled = no;
username = "";
authname = "";
passwd = "";
extension_number = 620;
reg_from_outside = no;
gsm_tethering = no;
tx_packetsize_in_ms = 0;
}
ua3 {
enabled = yes;
username = "TELEFONNUMMER 3 MIT VORWAHL";
authname = "";
passwd = "DAS 32 STELLIGE PASSWORT ZUR TEL.NR.: 3 AUS DER LOG.TXT";
registrar = "AUS DER LOG.TXT ENTNEHMEN";
ttl = 75m;
sipping_enabled = no;
sipping_interval = 280s;
name = "TELEFONNUMMER 3 MIT VORWAHL";
providernae = "";
with_displayname = no;
dtmfcfg = dtmfcfg_rtp_or_inband;
register_failwait = 0w;
register_failwaitmax = 30m;
stunserver = "";
stunserverport = 3478;
use_internat_calling_numb = no;
is_nat_aware = no;
localip = 0.0.0.0;
ignore_received_header = no;
always_clir = no;
clirtype = clir_star31star;
colptype = colp_privacy_id;
clipnstype = clipns_off;
vad_enabled = no;
only_one_dialog = no;
presence_supported = no;
mwi_supported = no;
ccbs_supported = no;
reg_support = regsupport_auto;
packetization = packetization_fixed;
tx_packetsize_in_ms = 20;
xrtp_periodic = 0;
reject_refer = yes;
no_register_fetch = yes;
do_not_register = no;
only_call_from_registrar = no;
invite_without_register_allowed = no;
outboundproxy = "*...siehe weiter unten";
outboundproxy_without_route_header = no;
dditype = ddi_none;
ddireception = "";
alias_head_number = "";
backup_wanted = no;
use_session_timer = no;
use_rport = yes;
add_rtpmap_for_all_codecs = no;
answer_only_one_codec = no;
without_annexb_no = no;
srtp_supported = no;
use_488_for_no_t38 = no;
g726_via_rfc3551 = no;
no_g726_32_offer_with_pt2 = no;
enable_3xx = yes;
t38_reinvite_from_remote = no;
use_t38version0 = no;
rtcp_xr_media_attribute = no;
read_p_asserted_identity_header = no;
route_always_over_internet = no;
gui_readonly = no;
}
use_audiocodecs = no;
audiocodecs = "PCMA", "PCMU", "G726-32";
verbose = no;
capi_blocksize_in_ms = 30;
sip_prio = 46;
rtp_prio = 46;
dyn_codecs = yes;
prio_low_codec = no;
send_ringtone = no;
t38_support_enabled = no;
enum_support_enabled = no;
bandwidth_to_leave_KBits = 0;
dialoglimit = 0;
enumdomains = "e164.arpa", "e164.org", "openenum.eu";
rtpstream {
voice_activity_detection {
vad_enabled = vadenabled_no;
vad_threshold = 10000;
}
plc {
in_the_stack = yes;
}
jitter {
auto_on = yes;
in_ms = 60;
in_packets = 0;
}
rtcp_enabled = yes;
silence_detection = no;
}
voip_assi_enabled = no;
extensions {
enabled = no;
username = "";
authname = "";
passwd = "";
extension_number = 620;
reg_from_outside = no;
gsm_tethering = no;
tx_packetsize_in_ms = 0;
}
}
// EOF
**** END OF FILE ****
Jetzt haben wir alle Einstellungen an der *.export-Datei vorgenommen und können diese Datei zurück in die Box schreiben.
Dieses geschieht im Fritz-Menü mit System > Einstellungen sichern > Wiederherstellen > Datei auswählen und auf Wiederherstellen klicken.
Nach Oben ^^^
Zitieren
