Nach einem Update von Freetz-trunk 6.30 nach Freetz-trunk 6.51 hängt die Box in einer Bootschleife und auch make recover klappt nicht mehr:
christoph@snoopy:~/Speed2freetz/freetz-trunk$ make recover IMAGE=dl/fw/FRITZ.Box_7490.113.06.30.image RECOVER=ds LOCALIP=192.168.1.120
This can help if your box is not booting any more
(Power LED on and flashing of all LEDs every 5 secs).
Make sure that there is only one box in your subnet.
Are you sure you want to recover filesystem and kernel
from dl/fw/FRITZ.Box_7490.113.06.30.image? (y/n) y
looking for boxes . found.
ADAM2 version 0.18.1 at 192.168.1.1 (192.168.1.1)
can't open control connection
christoph@snoopy:~/Speed2freetz/freetz-trunk$ make recover IMAGE=dl/fw/FRITZ.Box_7490.113.06.30.image RECOVER=ds LOCALIP=192.168.1.120
This can help if your box is not booting any more
(Power LED on and flashing of all LEDs every 5 secs).
Make sure that there is only one box in your subnet.
Are you sure you want to recover filesystem and kernel
from dl/fw/FRITZ.Box_7490.113.06.30.image? (y/n) y
looking for boxes .................... found.
ADAM2 version 0.18.1 at 192.168.1.1 (192.168.1.1)
Use of uninitialized value $mtd0_hex in pattern match (m//) at tools/recover-ds line 223.
Use of uninitialized value $mtd1_hex in pattern match (m//) at tools/recover-ds line 224.
Use of uninitialized value $mtd0_size in numeric ge (>=) at tools/recover-ds line 225.
Use of uninitialized value $mtd1_size in numeric gt (>) at tools/recover-ds line 225.
can't read partition offsets
Gibt es noch weitere Mittel?
christoph@snoopy:~/Speed2freetz/freetz-trunk$ make recover IMAGE=dl/fw/FRITZ.Box_7490.113.06.30.image RECOVER=ds LOCALIP=192.168.1.120
This can help if your box is not booting any more
(Power LED on and flashing of all LEDs every 5 secs).
Make sure that there is only one box in your subnet.
Are you sure you want to recover filesystem and kernel
from dl/fw/FRITZ.Box_7490.113.06.30.image? (y/n) y
looking for boxes . found.
ADAM2 version 0.18.1 at 192.168.1.1 (192.168.1.1)
can't open control connection
christoph@snoopy:~/Speed2freetz/freetz-trunk$ make recover IMAGE=dl/fw/FRITZ.Box_7490.113.06.30.image RECOVER=ds LOCALIP=192.168.1.120
This can help if your box is not booting any more
(Power LED on and flashing of all LEDs every 5 secs).
Make sure that there is only one box in your subnet.
Are you sure you want to recover filesystem and kernel
from dl/fw/FRITZ.Box_7490.113.06.30.image? (y/n) y
looking for boxes .................... found.
ADAM2 version 0.18.1 at 192.168.1.1 (192.168.1.1)
Use of uninitialized value $mtd0_hex in pattern match (m//) at tools/recover-ds line 223.
Use of uninitialized value $mtd1_hex in pattern match (m//) at tools/recover-ds line 224.
Use of uninitialized value $mtd0_size in numeric ge (>=) at tools/recover-ds line 225.
Use of uninitialized value $mtd1_size in numeric gt (>) at tools/recover-ds line 225.
can't read partition offsets
Gibt es noch weitere Mittel?