[Problem] FB 7270 bootloop (ISDN defekt?)

hellsfather

Neuer User
Mitglied seit
13 Mai 2007
Beiträge
2
Punkte für Reaktionen
0
Punkte
0
Hallo Forum,

ich habe ein kleines großes Problem mit meiner Box. (7270v2)
nachdem die Box anzeichen von schwächelnden Elkos zeigte (hat nicht mehr gebootet und nur glimmende leds gehabt), hab ich allesamt getauscht. Jetzt bootet die Box wieder bis zu einem gewissen grad.
Ich hab beide recovery images von AVM versucht aber beide führen zu dem unbefriedigenden Ergebnis:

FRITZ.Box_Fon_WLAN_7270_v2.05.54.recover-image.exe
Code:
********************************************************************
dect_file_process: upload of '/lib/modules/dectfw_secondlevel.hex' successfull
[piglet]bitfile '/lib/modules/microvoip_isdn_top.bit'

[piglet] clock from pll3(384000000)
[piglet] bitfile 169291 bytes done
[piglet]TDM: FS: 8000 Hz CLK:0 Hz
[piglet]error: Can't load bitfile/no TDM-Clocks -> retry
patch_dectfw: patch_adress: 94 max_len: 22 with Version 2 Len: 16
patch_dectfw: C0294000, datalen = 35145, 

**************
[0]system-load 5  23 tasks:60 % curr:modprobe(60 %) max:modprobe(60 %, pid:219), readytorun: 4, pgfault 0/s (max 0 avg 0.0)
******************************************************
dect_file_process: upload of '/lib/modules/dectfw_secondlevel.hex' successfull
[piglet]bitfile '/lib/modules/microvoip_isdn_top.bit'

[piglet] clock from pll3(384000000)
[piglet] bitfile 169291 bytes done
[piglet]TDM: FS: 8000 Hz CLK:0 Hz
[piglet]error: Can't load bitfile/no TDM-Clocks -> retry
patch_dectfw: patch_adress: 94 max_len: 22 with Version 2 Len: 16
patch_dectfw: C02FE000, datalen = 35145,
Diese Meldung wiederholt sich (vermutlich 50mal) bis es zu einer Kernel Panic kommt und die Box neustartet
Code:
dect_file_process: upload of '/lib/modules/dectfw_secondlevel.hex' successfull
[piglet]bitfile '/lib/modules/microvoip_isdn_top.bit'

[piglet] clock from pll3(384000000)
[piglet] bitfile 169291 bytes done
[piglet]TDM: FS: 8000 Hz CLK:0 Hz
[piglet]error: Can't load bitfile/no TDM-Clocks -> retry
patch_dectfw: patch_adress: 94 max_len: 22 with Version 2 Len: 16
patch_dectfw: C057A000, datalen = 35145, 

**************
[0]system-load 4  23 tasks:38 % curr:modprobe(38 %) max:modprobe(38 %, pid:219), readytorun: 4, pgfault 0/s (max 0 avg 0.0)
******************************************************
dect_file_process: upload of '/lib/modules/dectfw_secondlevel.hex' successfull
[piglet]bitfile '/lib/modules/microvoip_isdn_top.bit'

[piglet] clock from pll3(384000000)
[piglet] bitfile 169291 bytes done
[piglet]TDM: FS: 8000 Hz CLK:0 Hz
[piglet]error: Can't load bitfile/no TDM-Clocks -> retry
patch_dectfw: patch_adress: 94 max_len: 22 with Version 2 Len: 16
patch_dectfw: C05E4000, datalen = 35145, 

**************
[0]system-load 4  23 tasks:36 % curr:modprobe(36 %) max:modprobe(36 %, pid:219), readytorun: 4, pgfault 0/s (max 0 avg 0.0)
******************************************************
dect_file_process: upload of '/lib/modules/dectfw_secondlevel.hex' successfull
[piglet]bitfile '/lib/modules/microvoip_isdn_top.bit'

[piglet] clock from pll3(384000000)
[piglet] bitfile 169291 bytes done
[piglet]TDM: FS: 8000 Hz CLK:0 Hz
Call Trace:
[<94112d40>] dump_stack+0x8/0x34
[<9412293c>] panic+0x3c/0x1d4
[<c015a1dc>] init_module+0x1dc/0x23c [Piglet_noemif]
[<94108b98>] do_one_initcall+0x74/0x1f4
[<9414ca00>] sys_init_module+0xe4/0x220
[<941026e4>] stack_done+0x20/0x3c

Kernel panic - not syncing: 
[piglet]panic: Can't load bitfile/no TDM-Clocks

Rebooting in 3 seconds..


fritz.box_fon_wlan_7270_v2.06.06.recover-image.exe
Code:
[avm_debug]redirect kernel-messages (/dev/debug)
nit.d/S11-piglet

[module-alloc-by-name] give 0xB000 bytes at 0x95096000 to module 'Piglet_noemif' (0x4D5000 bytes left)
[module-alloc-by-name] 0xB000 bytes used, 0xDD3C bytes expected
[piglet]use settings for 139(6 gpios from hw_config)

patch_dectfw: patch_adress: 94 max_len: 22 with Version 2 Len: 16
patch_dectfw: C014C000, datalen = 35634, 
dect_loader(first): unknown 0 in state dect_wait_for_ack received

*******************************************
[0]system-load 6  loadavg 0.39 0.8 0.3 - 21 tasks:56 % curr:modprobe(32 %) max:modprobe(32 %, pid:217), readytorun: 5, pgfault 2391/s (max 1 avg 1.0)
**************************
dect_file_process: upload of '/lib/modules/dectfw_secondlevel.hex' successfull
[piglet]bitfile '/lib/modules/microvoip_isdn_top.bit'

[piglet] clock from pll3(384000000)
[piglet] bitfile 169291 bytes done
[piglet]TDM: FS: 8000 Hz CLK:0 Hz
[piglet]error: Can't load bitfile/no TDM-Clocks -> retry
patch_dectfw: patch_adress: 94 max_len: 22 with Version 2 Len: 16
patch_dectfw: C01E2000, datalen = 35634, 

*********************************************************************
dect_file_process: upload of '/lib/modules/dectfw_secondlevel.hex' successfull
[piglet]bitfile '/lib/modules/microvoip_isdn_top.bit'

[piglet] clock from pll3(384000000)
[piglet] bitfile 169291 bytes done
[piglet]TDM: FS: 8000 Hz CLK:0 Hz
[piglet]error: Can't load bitfile/no TDM-Clocks -> retry
patch_dectfw: patch_adress: 94 max_len: 22 with Version 2 Len: 16
patch_dectfw: C024C000, datalen = 35634, 

**************
[0]system-load 5  loadavg 0.49 0.11 0.4 - 21 tasks:60 % curr:modprobe(60 %) max:modprobe(60 %, pid:217), readytorun: 4, pgfault 0/s (max 0 avg 0.0)
*******************************************************
dect_file_process: upload of '/lib/modules/dectfw_secondlevel.hex' successfull
[piglet]bitfile '/lib/modules/microvoip_isdn_top.bit'

[piglet] clock from pll3(384000000)
[piglet] bitfile 169291 bytes done
[piglet]TDM: FS: 7990 Hz CLK:0 Hz
und dann nach einiger Zeit wie oben dann die Kernel Panic mit reboot:
Code:
**************
[0]system-load 4  loadavg 1.87 0.75 0.27 - 21 tasks:39 % curr:modprobe(39 %) max:modprobe(39 %, pid:217), readytorun: 3, pgfault 0/s (max 0 avg 0.0)
*******************************************************
dect_file_process: upload of '/lib/modules/dectfw_secondlevel.hex' successfull
[piglet]bitfile '/lib/modules/microvoip_isdn_top.bit'

[piglet] clock from pll3(384000000)
[piglet] bitfile 169291 bytes done
[piglet]TDM: FS: 8000 Hz CLK:0 Hz
[piglet]error: Can't load bitfile/no TDM-Clocks -> retry
patch_dectfw: patch_adress: 94 max_len: 22 with Version 2 Len: 16
patch_dectfw: C059C000, datalen = 35634, 

**************
[0]system-load 4  loadavg 2.1 0.84 0.31 - 21 tasks:37 % curr:modprobe(37 %) max:modprobe(37 %, pid:217), readytorun: 3, pgfault 0/s (max 0 avg 0.0)
*******************************************************
dect_file_process: upload of '/lib/modules/dectfw_secondlevel.hex' successfull
[piglet]bitfile '/lib/modules/microvoip_isdn_top.bit'

[piglet] clock from pll3(384000000)
[piglet] bitfile 169291 bytes done
[piglet]TDM: FS: 8000 Hz CLK:0 Hz
Call Trace:
[<9411da78>] 0x9411da78
[<94112df8>] 0x94112df8
[<94112df8>] 0x94112df8
[<94122cd4>] 0x94122cd4
[<9412de48>] 0x9412de48
[<9412e334>] 0x9412e334
[<94130000>] 0x94130000
[<c01141dc>] 0xc01141dc
[<c0114000>] 0xc0114000
[<94108d60>] 0x94108d60
[<941495b4>] 0x941495b4
[<9413e800>] 0x9413e800
[<9414b6c0>] 0x9414b6c0
[<941291dc>] 0x941291dc
[<94102704>] 0x94102704
Kernel panic - not syncing: 
[piglet]panic: Can't load bitfile/no TDM-Clocks

Rebooting in 3 seconds..

Das Problem verhält sich ein bisschen ähnlich zu dem hier beschriebenen:
http://www.ip-phone-forum.de/showthread.php?t=243040
Was mich dazu verleiten hat lassen mal ein 3270er Image zu laden. Siehe da - die Box bootet. Allerdings ohne Telefonfunktionen...

Alternativ hab ich mir ein Freetz-Image gebaut, bei dem ich per Removal patches alle Module im Zusammenhang mit Telefonie herausgenommen habe. Dann bootet die Box auch durch.

Also offensichtlich klappt was mit der TDM-Clock nicht :/ Aber was genau ist die eigentlich?

Hat hier jemand einen Rat für mich, oder eine Idee wonach ich suchen kann?

Vielen Dank schon mal an alle.

Viele Grüße
Manu
 
Holen Sie sich 3CX - völlig kostenlos!
Verbinden Sie Ihr Team und Ihre Kunden Telefonie Livechat Videokonferenzen

Gehostet oder selbst-verwaltet. Für bis zu 10 Nutzer dauerhaft kostenlos. Keine Kreditkartendetails erforderlich. Ohne Risiko testen.

3CX
Für diese E-Mail-Adresse besteht bereits ein 3CX-Konto. Sie werden zum Kundenportal weitergeleitet, wo Sie sich anmelden oder Ihr Passwort zurücksetzen können, falls Sie dieses vergessen haben.