7971: kein Telefonbuch vorhanden / Frage zum Wideband-Handset

<?xml version="1.0" encoding="UTF-8"?>
<device>
   <deviceProtocol>SIP</deviceProtocol>
   <sshUserId>admin</sshUserId>
   <sshPassword>admin</sshPassword>
   <devicetype>7971</devicetype> <!-- habe ich gelesen, dass man den Eintrag benötigt -->
   <devicePool>
      <dateTimeSetting>
         <dateTemplate>D.M.YY</dateTemplate> <!-- Jahreszahl nur 2-stellig -->
         <timeZone>W. Europe Standard/Daylight Time</timeZone>
         <olsonTimeZone>Europe/Berlin</olsonTimeZone>
         <ntps>
            <ntp>
               <name>192.168.2.1</name> <!-- IP des NTP Server. Hier die FRITZ!box -->
               <ntpMode>Unicast</ntpMode>
            </ntp>
         </ntps>
      </dateTimeSetting>
    <userLocale>
    <name>German_Germany</name>
    <uid>9</uid>
    <langCode>de_De</langCode>
    <version>11.7(2.9902)DEU</version>
    <winCharSet></winCharSet>
  </userLocale>
  <networkLocale>Germany</networkLocale>
  <networkLocaleInfo>
    <name>Germany</name>
    <uid>9</uid>
    <version>1.0.0.0-1</version>
  </networkLocaleInfo>
      <callManagerGroup>
         <members>
            <member priority="0">
               <callManager>
                  <ports>
                     <ethernetPhonePort>2000</ethernetPhonePort>
                     <sipPort>5060</sipPort>
                     <securedSipPort>5061</securedSipPort>
                  </ports>
                  <processNodeName>192.168.2.1</processNodeName> <!-- IP Adresse der FRITZ!box -->
               </callManager>
            </member>
         </members>
      </callManagerGroup>
   </devicePool>

   <commonProfile>
      <phonePassword></phonePassword>
      <backgroundImageAccess>true</backgroundImageAccess>
      <callLogBlfEnabled>2</callLogBlfEnabled>
   </commonProfile>

   <loadInformation>SIP70.9-4-2SR3-1S</loadInformation> <!-- Bezeichnung der zu ladenden Firmware -->

   <vendorConfig>
      <disableSpeaker>false</disableSpeaker>
      <disableSpeakerAndHeadset>false</disableSpeakerAndHeadset>
      <pcPort>0</pcPort>
      <settingsAccess>1</settingsAccess>
      <garp>0</garp>
      <voiceVlanAccess>0</voiceVlanAccess>
      <videoCapability>0</videoCapability>
      <autoSelectLineEnable>0</autoSelectLineEnable>
      <sshAccess>0</sshAccess>
      <sshPort>22</sshPort>
      <webAccess>0</webAccess>
      <spanToPCPort>1</spanToPCPort>
      <loggingDisplay>1</loggingDisplay>
      <loadServer></loadServer>
      <daysDisplayNotActive></daysDisplayNotActive>
      <displayOnTime>03:00</displayOnTime>
      <displayOnDuration>00:01</displayOnDuration>
      <displayIdleTimeout>00:05</displayIdleTimeout>
      <displayOnWhenIncomingCall>1</displayOnWhenIncomingCall>
   </vendorConfig>

   <deviceSecurityMode>1</deviceSecurityMode>
   
   <authenticationURL>http://192.168.44.1/ciscoauth.php</authenticationURL--> <!-- wird nicht genutzt -->
   <directoryURL>http://192.168.44.1/directory.php</directoryURL> <!-- wird nicht genutzt -->
   <idleURL></idleURL>
   <informationURL></informationURL>
   -->

   <messagesURL></messagesURL>
   <proxyServerURL></proxyServerURL>
   <servicesURL></servicesURL>
   <dscpForSCCPPhoneConfig>96</dscpForSCCPPhoneConfig>
   <dscpForSCCPPhoneServices>0</dscpForSCCPPhoneServices>
   <dscpForCm2Dvce>96</dscpForCm2Dvce>

   <transportLayerProtocol>2</transportLayerProtocol>

   <capfAuthMode>0</capfAuthMode>
   <capfList>
      <capf>
         <phonePort>3804</phonePort>
      </capf>
   </capfList>

   <certHash></certHash>
   <encrConfig>false</encrConfig>

   <sipProfile>
      <sipProxies>
         <backupProxy></backupProxy>
         <backupProxyPort></backupProxyPort>
         <emergencyProxy></emergencyProxy>
         <emergencyProxyPort></emergencyProxyPort>
         <outboundProxy></outboundProxy>
         <outboundProxyPort></outboundProxyPort>
         <registerWithProxy>true</registerWithProxy>
      </sipProxies>

      <sipCallFeatures>
         <cnfJoinEnabled>true</cnfJoinEnabled>
         <callForwardURI>x--serviceuri-cfwdall</callForwardURI>
         <callPickupURI>x-cisco-serviceuri-pickup</callPickupURI>
         <callPickupListURI>x-cisco-serviceuri-opickup</callPickupListURI>
         <callPickupGroupURI>x-cisco-serviceuri-gpickup</callPickupGroupURI>
         <meetMeServiceURI>x-cisco-serviceuri-meetme</meetMeServiceURI>
         <abbreviatedDialURI>x-cisco-serviceuri-abbrdial</abbreviatedDialURI>
         <rfc2543Hold>false</rfc2543Hold>
         <callHoldRingback>2</callHoldRingback>
         <localCfwdEnable>true</localCfwdEnable>
         <semiAttendedTransfer>true</semiAttendedTransfer>
         <anonymousCallBlock>2</anonymousCallBlock>
         <callerIdBlocking>2</callerIdBlocking>
         <dndControl>0</dndControl>
         <remoteCcEnable>true</remoteCcEnable>
      </sipCallFeatures>

      <sipStack>
         <sipInviteRetx>6</sipInviteRetx>
         <sipRetx>10</sipRetx>
         <timerInviteExpires>180</timerInviteExpires>
         <timerRegisterExpires>3600</timerRegisterExpires>
         <timerRegisterDelta>5</timerRegisterDelta>
         <timerKeepAliveExpires>120</timerKeepAliveExpires>
         <timerSubscribeExpires>120</timerSubscribeExpires>
         <timerSubscribeDelta>5</timerSubscribeDelta>
         <timerT1>500</timerT1>
         <timerT2>4000</timerT2>
         <maxRedirects>70</maxRedirects>
         <remotePartyID>false</remotePartyID>
         <userInfo>None</userInfo>
      </sipStack>

      <autoAnswerTimer>1</autoAnswerTimer>
      <autoAnswerAltBehavior>false</autoAnswerAltBehavior>
      <autoAnswerOverride>true</autoAnswerOverride>
      <transferOnhookEnabled>false</transferOnhookEnabled>
      <enableVad>false</enableVad>
      <preferredCodec>none</preferredCodec>
      <dtmfAvtPayload>101</dtmfAvtPayload>
      <dtmfDbLevel>3</dtmfDbLevel>
      <dtmfOutofBand>avt</dtmfOutofBand>
      <alwaysUsePrimeLine>false</alwaysUsePrimeLine>
      <alwaysUsePrimeLineVoiceMail>false</alwaysUsePrimeLineVoiceMail>
      <kpml>3</kpml>

      <natEnabled>false</natEnabled>
      <natAddress></natAddress>

      <stutterMsgWaiting>0</stutterMsgWaiting>

      <callStats>false</callStats>

      <silentPeriodBetweenCallWaitingBursts>10</silentPeriodBetweenCallWaitingBursts>
      <disableLocalSpeedDialConfig>false</disableLocalSpeedDialConfig>

      <startMediaPort>16384</startMediaPort>
      <stopMediaPort>32766</stopMediaPort>

     <voipControlPort>5060</voipControlPort>
     <dscpForAudio>184</dscpForAudio>
     <ringSettingBusyStationPolicy>0</ringSettingBusyStationPolicy>
     <dialTemplate>dialplan.xml</dialTemplate>

      <phoneLabel>EG</phoneLabel>    
      <sipLines>
         <!-- Konfiguriert die Funktionstasten neben dem Display
            <featureID>9</featureID> gilt für ausgehende Leitungen (primary Lines)
            <featureID>2</featureID> für Kurzwahltasten (Speed Dial)
            -->
         <line button="1">
            <featureID>9</featureID>
            <featureLabel>12345</featureLabel>   <!-- Bezeichnung der Taste / Anzeige im Display -->
            <name>620</name>
            <displayName>620</displayName>
            <contact>620</contact>
             <!--Den folgenden Eintrag USECALLMANAGER so belassen. Wenn man hier die IP
             der FRITZ!box einträgt funktioniert die Konfiguration nicht. Die IP wird bereits 
             oben im Abschnitt <callManagerGroup> definiert -->
            <proxy>USECALLMANAGER</proxy>
            <port>5060</port>
            <autoAnswer>
               <autoAnswerEnabled>2</autoAnswerEnabled>
            </autoAnswer>
            <callWaiting>3</callWaiting>

            <authName>620</authName> <!-- Name des IP Telefons aus der FRITZ!box -->
            <authPassword>PW</authPassword> <!-- Passwort des IP Telefons aus der FRITZ!box -->

            <sharedLine>false</sharedLine>
            <messageWaitingLampPolicy>1</messageWaitingLampPolicy>
            <messagesNumber>**600</messagesNumber>
            <ringSettingIdle>4</ringSettingIdle>
            <ringSettingActive>5</ringSettingActive>

            <forwardCallInfoDisplay>
               <callerName>true</callerName>
               <callerNumber>true</callerNumber>
               <redirectedNumber>false</redirectedNumber>
               <dialedNumber>true</dialedNumber>
            </forwardCallInfoDisplay>
         </line>
         
         <!-- Die Tasten können frei belegt werden. Hier ein Beispiel für eine Kurzwahl -->
         <line button="3"> 
            <featureID>2</featureID>
            <featureLabel>xyz</featureLabel>
            <speedDialNumber>1234</speedDialNumber>
         </line>
         <line button="4"> 
            <featureID>2</featureID>
            <featureLabel>xyz</featureLabel>
            <speedDialNumber>1234</speedDialNumber>
         </line>
         <line button="5"> 
            <featureID>2</featureID>
            <featureLabel>xyz</featureLabel>
            <speedDialNumber>1234</speedDialNumber>
         </line>
         <line button="6"> 
            <featureID>2</featureID>
            <featureLabel>xyz</featureLabel>
            <speedDialNumber>1234</speedDialNumber>
         </line> 
         <line button="7"> 
            <featureID>2</featureID>
            <featureLabel>xyz</featureLabel>
            <speedDialNumber>1234</speedDialNumber>
         </line>
         <line button="8"> 
            <featureID>2</featureID>
            <featureLabel>xyz</featureLabel>
            <speedDialNumber>1234</speedDialNumber>
         </line>
         <line button="9"> 
            <featureID>2</featureID>
            <featureLabel>Test</featureLabel>
            <speedDialNumber>12345</speedDialNumber>
         </line>
      </sipLines>
   </sipProfile>
   <addOnModules>
 <addOnModule idx="1">
  <deviceType>7914</deviceType>
  <deviceLine>14</deviceLine>
  <loadInformation>S00105000400</loadInformation>
 </addOnModule>
</addOnModules>
</device>