- Mitglied seit
- 26 Jan 2006
- Beiträge
- 128
- Punkte für Reaktionen
- 0
- Punkte
- 0
Hi zusammen,
ich hatte bis gestern Abend eine lauffähige 1.2.3 * mit SIP und chan_capi. (AVM A1 PCI)
Nun wollte ich meine Telefonanlage an die * anschließen und habe dazu eine HFC Karte hinzugefügt.... und * gleich auf 1.2.4 gehoben.
Mit dem für die HFC Karte notwendigen bristuff kommt auch eine aktuelle chan_capi, die ich auch brav compilert habe.
Bie starten von * kommt nun
Wenn ich von einem SIP Phone ins ISDN wähle, kommt
Im SuSe yast sehe ich die 2 Karten ins system eingebunden
AVM > contr0
HFC > contr1
Vorher hatte es mit contoller=1 in der capi.conf funktioniert, wegen Suse HFC > contr1 habe ich es nun auf 0 gesetzt... kein Erfolg.
aber zur Ansicht:
Hier mal meine capi.conf:
ansonsten sagt mir die * noch:
und das System:
Ich kann irgendwie nichts komisches finden.
Hat dazu jemand eine Idee?
Vielen Dank.
Stefan
ich hatte bis gestern Abend eine lauffähige 1.2.3 * mit SIP und chan_capi. (AVM A1 PCI)
Nun wollte ich meine Telefonanlage an die * anschließen und habe dazu eine HFC Karte hinzugefügt.... und * gleich auf 1.2.4 gehoben.
Mit dem für die HFC Karte notwendigen bristuff kommt auch eine aktuelle chan_capi, die ich auch brav compilert habe.
Bie starten von * kommt nun
Code:
== Parsing '/etc/asterisk/modules.conf': Found
[chan_capi.so] => (Common ISDN API for Asterisk)
== Parsing '/etc/asterisk/capi.conf': Found
-- This box has 1 capi controller(s).
-- CAPI/contr1 supports DTMF
-- CAPI/contr1 supports supplementary services
> sent FACILITY_REQ (CONTROLLER=0x1)
> FACILITY_CONF INFO = 0
> HOLD/RETRIEVE
> TERMINAL PORTABILITY
> ECT
> 3PTY
> CF
> CD
> MCID
> CCBS
> MWI
> CCNR
Feb 17 16:58:06 WARNING[25899]: chan_capi.c:2825 load_module: Unused contr1
== Registered channel type 'CAPI' (Common ISDN API Driver (0.4.0) aLaw )
Wenn ich von einem SIP Phone ins ISDN wähle, kommt
Code:
*CLI> -- Executing Dial("SIP/Stefan-PC-1844", "CAPI/contr0/001731234567|30|r") in new stack
Feb 17 16:58:15 NOTICE[25920]: chan_capi.c:1197 capi_request: didn't find capi device with controller = 0 or group = 0.
Feb 17 16:58:15 NOTICE[25920]: app_dial.c:1030 dial_exec_full: Unable to create channel of type 'CAPI' (cause 0 - Unknown)
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing Congestion("SIP/Stefan-PC-1844", "") in new stack
Im SuSe yast sehe ich die 2 Karten ins system eingebunden
AVM > contr0
HFC > contr1
Vorher hatte es mit contoller=1 in der capi.conf funktioniert, wegen Suse HFC > contr1 habe ich es nun auf 0 gesetzt... kein Erfolg.
aber zur Ansicht:
Code:
*CLI> -- Executing Dial("SIP/Stefan-PC-1b70", "CAPI/contr1/001731234567|30|r") in new stack
Feb 17 17:14:48 NOTICE[25997]: chan_capi.c:1197 capi_request: didn't find capi device with controller = 1 or group = 0.
Feb 17 17:14:48 NOTICE[25997]: app_dial.c:1030 dial_exec_full: Unable to create channel of type 'CAPI' (cause 0 - Unknown)
== Everyone is busy/congested at this time (1:0/0/1)
Hier mal meine capi.conf:
Code:
[general]
nationalprefix=0
internationalprefix=00
rxgain=0.8
txgain=0.8
language=de ;set default language
[ISDN1]
isdnmode=msn
incomingmsn=17
controller=0
group=1
softdtmf=on
relaxdtmf=on
accountcode=
context=capi-in
devices=2
ansonsten sagt mir die * noch:
Code:
*CLI> capi info
Contr1: 2 B channels total, 2 B channels free.
*CLI>
und das System:
Code:
suse# capiinfo
Number of Controllers : 1
Controller 1:
Manufacturer: AVM GmbH
CAPI Version: 2.0
Manufacturer Version: 3.11-02 (49.18)
Serial Number: 1000001
BChannels: 2
Global Options: 0x00000039
internal controller supported
DTMF supported
Supplementary Services supported
channel allocation supported (leased lines)
B1 protocols support: 0x4000011f
64 kbit/s with HDLC framing
64 kbit/s bit-transparent operation
V.110 asynconous operation with start/stop byte framing
V.110 synconous operation with HDLC framing
T.30 modem for fax group 3
Modem asyncronous operation with start/stop byte framing
B2 protocols support: 0x00000b1b
ISO 7776 (X.75 SLP)
Transparent
LAPD with Q.921 for D channel X.25 (SAPI 16)
T.30 for fax group 3
ISO 7776 (X.75 SLP) with V.42bis compression
V.120 asyncronous mode
V.120 bit-transparent mode
B3 protocols support: 0x800000bf
Transparent
T.90NL, T.70NL, T.90
ISO 8208 (X.25 DTE-DTE)
X.25 DCE
T.30 for fax group 3
T.30 for fax group 3 with extensions
Modem
0100
0200
39000000
1f010040
1b0b0000
bf000080
00000000 00000000 00000000 00000000 00000000 00000000
01000001 00020000 00000000 00000000 00000000
Supplementary services support: 0x000003ff
Hold / Retrieve
Terminal Portability
ECT
3PTY
Call Forwarding
Call Deflection
MCID
CCBS
Ich kann irgendwie nichts komisches finden.
Hat dazu jemand eine Idee?
Vielen Dank.
Stefan