Aktueller Inhalt von baribal

@PeterPawn Hi there. Are we going to move forward with this topic or this is a dead end (or you are occupied with other important doings)? Many thx in advance.

@PeterPawn # grep HW /proc/1566/environ HWRevision_ATA=1 HWRevision_BitFileCount= HWRevision=206 CONFIG_PRODUKT=Fritz_Box_HW206 HWSubRevision=7 [60955.955736] [wlan_config] Given config is: [60955.955757] [wlan_config] hw_interface=0 chip_type=8 (scorpion) offload=1 (non) [60955.955770]...

For now I tried a bit different approach: # /etc/init.d/rc.wlan stop # ps | grep wland 1244 root 1848 S grep wland # lsmod Module Size Used by Tainted: P zram 15360 1 krextdmod 250560 8 cchardev 15104 1 krextdmod...

@PeterPawn Also I don't see below messages (which appear during the normal boot cycle) while executing insmod commands manually (I tried also to add "patch_eeprom=1" parameter): [ 82.227225] [wlan_config] HWRevision now 205 [ 82.227259] [wlan_config] HWSubRevision now 2 [ 82.227300]...

@PeterPawn # insmod /lib/modules/4.4.60/net/mem_manager.ko # insmod /lib/modules/4.4.60/net/asf.ko # insmod /lib/modules/4.4.60/net/qdf.ko No new dmesg messages and no changes in "ifconfig -a" after each command above insmod /lib/modules/4.4.60/net/ath_dfs.ko [ 3610.550654] ath_dfs: Version...

# insmod /lib/modules/4.4.60/net/aae.ko hw_interface=0,1 chip_type=8,11 offload=1,1 [ 2055.069136] [wlan_config] chip_type parameter "8" invalid! [ 2055.078488] [wlan_config] chip_type parameter "8" invalid! with prodtest it starts: insmod /lib/modules/4.4.60/net/aae.ko hw_interface=0,1...

Managed to catch during startup (however there is no "parameters" dir inside the "aae" dir): # ls -l /sys/module/aae/ -r--r--r-- 1 root root 4096 Aug 26 18:29 coresize drwxr-xr-x 2 root root 0 Aug 26 18:29 holders -r--r--r-- 1 root root 4096...

# insmod ./lib/modules/4.4.60/net/ath_dfs.ko insmod: can't insert './lib/modules/4.4.60/net/ath_dfs.ko': unknown symbol in module, or unknown parameter dmesg: [663828.848515] ath_dfs: Unknown symbol avm_context_clear_dfs_chan_clear_list (err 0) [663828.848554] ath_dfs: Unknown symbol...

# modprobe -v mem_manager # modprobe -v asf # modprobe -v qdf # modprobe -v ath_spectral # modprobe -v ath_dfs modprobe: can't load module aae (net/aae.ko): Invalid argument # modprobe -v umac modprobe: can't load module aae (net/aae.ko): Invalid argument # modprobe -v ath_hal modprobe: can't...

I've just generated the support file (I have 7.27 installed to DVB-C atm).

@PeterPawn Please find the logs attached. I couldn't produce the logs from /dev/debug earlier than the time which you can find inside the logs in the attachment file. I commented out the required block and amended the log level to 6. I tried to use two files...

Hi there. Please find dmesg and debug logs attached. I put the commands to rc.net and even though 1750E is systemd based it helped to get the complete dmesg log. As for debug logs they are started each time with this ~9sec record ("reanimated debugbuffer: read=0 write=0, written=0") and are not...

@PeterPawn Yep, you are right I messed up with the adding nmi to the repacked 7.01 and 7.08 firmware, however they boot just fine without nmi. Please find the logs from the 7.08_nmi_added attached. Just a notice that "cat /dev/debug" hangs almost each try, so if added to the different rc.X...

Hey @PeterPawn. Nope, there are no issues from my end. :) Just busy days. I'll try to dig through #101 today if not fall asleep. :D

Please find attached.