Suchergebnisse

I did not try the serial console before the problem started so I am not sure if the serial console was working and taking to the prompt or not. But from what I see, the four lines pop up in less than a second and there is no way to escape the sequence. I have raised a ticket with AVM. Waiting...

Hi Haveaniceday, Unfortunately there is no way of getting to the ADAM2 prompt. Thanks for your help. Regards, - Gaurav

Guys, I tried the recovery application again. This time with the latest recovery exe from AVM but still no luck :( The recovery util is unable to find the FB and the FB's info light remains lit all the time. Below is what I got when I ran the recovery. The failure message came after I had...

I have not erased MTD2 for sure. The only two partitions that I erased were 3 and 4. I will be trying the Windows recovery tool later in the evening but yesterday, I was using the recovery.pl script from Enrik, which was unable to find a FB on the network. I also ran ethereal to check for...

I am unable to stop the boot sequence. I will give the suggestions a shot this evening. I use Linux on my laptop. My colleague here has a FB WLAN 7050 (same as mine). I will get the mtd3 and mtd4 off his box. Thanks...Will let you know how it goes. Regards, - Gaurav

Haveaniceday, Thanks for the reply. One basic problem :) Without access to the prompt how do I send the commands to the FB? SETENV mtd0,0x900C0000,0x903C0000 SETENV mtd1,0x90010000,0x900C0000 SETENV mtd2,0x90000000,0x90010000 SETENV mtd3,0x903C0000,0x903E0000 SETENV mtd4,0x903E0000,0x90400000...

Hi JSchling, Thanks for your response. One can use the SETENV command to configure most of the environment variables either via a serial console or via the telnet to ftp port. In my case, I had a connection to the FB over 192.168.100.2 rather than 192.168.178.2. Does not really matters as I...

Thanks for the detailed explaination, haveaniceday. Couple of things: 1) I assume I did a mistake of not setting the env variables after I did the "put empty" into mtd3 and mtd4. 2) The all inclusive recovery tool from AVM works over IP. right? My FB came with a CD, which has the following...

Thanks. But currently IP is not an option that I have. If the box was accessible over ftp or booted properly into the console, I would have (hopefully) managed to fix it. What I can't understand is how would earsing mtd3 and mtd4 partitions corrupt the boot loader? Regards, - Gaurav

Hi Peter, The box came with a CD, which has the recovery util. I tried that as well as the recovery.pl util from Enrik but none of them work as they don't see the FB at 192.168.100.2 (this was my_ipaddress in my env by default). I can't ftp to the box either. Regards, - Gaurav

Hi Haveaniceday, I did the following: $ touch empty ftp into FB bin quote MEDIA FLSH put empty "0x0 mtd3" put empty "0x0 mtd4" quote REBOOT The info light on the box stayed on and the box did not boot up. Was not able to get it into recovery mode either. Connecting to the fritz box via a...

Hi, Sorry, I don't speak German and hope that somebody will be able to help me. I have a FB WLAN 7050 on which the info light stays on all the time. Connecting to the FB via a console, I noticed that the FB is getting stuck after a message: change 'mtd4' to 0x903E0000,0x90400000 Below...