P[ 2] I IND :SETUP oad:01576xxxxxx dad:28129 pid:95 state:none
P[ 2] --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 2] --> info_dad: onumplan:2 dnumplan:4 rnumplan: cpnnumplan:0
P[ 2] --> Bearer: Speech
P[ 2] --> Codec: Alaw
P[ 0] --> * NEW CHANNEL dad:28129 oad:1736xxxxxx
P[ 2] --> CTON: Unknown
P[ 2] --> PRES: Restricted (0)
P[ 2] --> SCREEN: Unscreened (0)
P[ 2] I SEND:PROCEEDING oad:01576xxxxxx dad:28129 pid:95
P[ 2] --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 2] --> info_dad: onumplan:2 dnumplan:4 rnumplan: cpnnumplan:0
P[ 2] --> TRANSPARENT Mode
-- Executing Dial("mISDN/5-1", "mISDN/g:ISDN-NT/70") in new stack
P[ 0] --> Group Call group: ISDN-NT
P[ 0] --> * NEW CHANNEL dad:70 oad:(null)
P[ 6] --> TON: Unknown
P[ 6] --> LTON: Unknown
P[ 6] --> CTON: Unknown
P[ 6] * CALL: g:ISDN-NT/70
P[ 6] --> * dad:70 tech:mISDN/6-u46 ctx:isdn_out
P[ 6] --> pres: -1 screen: -1
P[ 6] --> pres: 0
P[ 6] --> PRES: Allowed (0x0)
P[ 6] --> SCREEN: Unscreened (0x0)
P[ 6] NO OPTS GIVEN
P[ 6] Disabling EC on both Sides
P[ 6] I SEND:SETUP oad:01576xxxxxx dad:70 pid:96
P[ 6] --> channel:0 mode:NT cause:16 ocause:16 rad: cad:
P[ 6] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 6] I IND :CC_SETUP|CONFIRM: old l3id:ff00 new l3id:801bff00
P[ 6] I IND :NEW_L3ID oad:01576xxxxxx dad:70 pid:96 state:NOTHING
P[ 6] --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 6] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 6] --> * SEND: State Dialing pid:96
-- Called g:ISDN-NT/70
P[ 6] We already have a channel (1)
P[ 6] I IND :SETUP_ACKNOWLEDGE oad:01576xxxxxx dad:70 pid:96 state:CALLING
P[ 6] --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 6] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 2] I IND :DISCONNECT oad:01576xxxxxx dad:28129 pid:95 state:DIALING
P[ 2] * IND : HANGUP pid:95 ctx:default dad:28129 oad:01576xxxxxx State:DIALING
P[ 2] --> out_cause:16
P[ 2] --> state:DIALING
P[ 2] $$$ Cleaning up bc with stid :10010500 pid:95
P[ 2] I IND :RELEASE_COMPLETE oad: dad: pid:95 state:CLEANING
P[ 2] --> channel:0 mode:TE cause:16 ocause:16 rad: cad:
P[ 2] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 2] --> No need to queue hangup
P[ 2] Cannot hangup chan, no ast
P[ 6] I IND :RELEASE_COMPLETE oad: dad: pid:0 state:none
P[ 6] --> channel:0 mode:NT cause:0 ocause:16 rad: cad:
P[ 6] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 6] --> no Ch, so we've already released.
P[ 0] Cannot hangup chan, no ch
P[ 6] release_chan: Ch not found!
P[ 6] --> No need to queue hangup
P[ 6] Cannot hangup chan, no ast
