1un1 auf Festnetz => verstehe den angerufenen nicht!?!?

[susanne]

1und1 zu 1und1 da ist alles o.k.


Was ist zu tun das ich diese letzt Hirde auch noch nehmen kann.

Ich hoffe auf eure Hilfe. Danke


Hier ist mal noch der Telnetmitschnitt, vielleicht lässt dieser ja was erkennen.

Sep 8 14:03:58 voipd[326]: <<< Status: 200 OK
Sep 8 14:03:58 voipd[326]: sip:[email protected]:23958: REGISTER comp
lete (next in 1620 seconds)
Sep 8 14:03:58 voipd[326]: >>> Request: INVITE sip:[email protected]
Sep 8 14:03:59 voipd[326]: <<< Status: 100 trying -- your call is important to
us
Sep 8 14:03:59 voipd[326]: <<< Status: 183 Session Progress
Sep 8 14:03:59 voipd[326]: audio: 8 (<NORTPMAP>)
Sep 8 14:03:59 voipd[326]: audio: 8 (<NORTPMAP>) => (8 (PCMA/8000))
Sep 8 14:03:59 voipd[326]: audio: 101 (101 telephone-event/8000)
Sep 8 14:03:59 voipd[326]: audio: 101 (101 telephone-event/8000) => (101 (101 t
elephone-event/8000))
Sep 8 14:03:59 voipd[326]: audio: 100 (100 X-NSE/8000)
Sep 8 14:03:59 voipd[326]: audio: 100 (100 X-NSE/8000) => NOT SUPPORTED
Sep 8 14:03:59 voipd[326]: payload >>> 8
Sep 8 14:03:59 voipd[326]: payload >>> 101
Sep 8 14:03:59 voipd[326]: 62.53.176.129 18136 - 7078 audio 8(PCMA)
Sep 8 14:03:59 voipd[326]: Codec PCMA (8) - audio
Sep 8 14:03:59 voipd[326]: rtp_start_session(video): no session definition
Sep 8 14:03:59 voipd[326]: bridgelimit: nConnections=1
Sep 8 14:03:59 voipd[326]: bridge lan set to max 30 packets/100ms
Sep 8 14:03:59 voipd[326]: plci_connected(appl=2 plci=0x204 ncci=0x0 incoming)
Sep 8 14:03:59 voipd[326]: connected(appl=2 plci=0x204 ncci=0x10204 incoming) N
CPIlen=0


Sep 8 14:04:28 voipd[326]: small packets merged 0, output 0 and consume
d from CNG 0
Sep 8 14:04:28 voipd[326]: capiqueue[0]: 0 ( 0.0%)
Sep 8 14:04:28 voipd[326]: capiqueue[1]: 0 ( 0.0%)
Sep 8 14:04:28 voipd[326]: capiqueue[2]: 0 ( 0.0%)
Sep 8 14:04:28 voipd[326]: capiqueue[3]: 0 ( 0.0%)
Sep 8 14:04:28 voipd[326]: capiqueue[4]: 0 ( 0.0%)
Sep 8 14:04:28 voipd[326]: capiqueue[5]: 0 ( 0.0%)
Sep 8 14:04:28 voipd[326]: capiqueue[6]: 0 ( 0.0%)
Sep 8 14:04:28 voipd[326]: capiqueue[7]: 0 ( 0.0%)
Sep 8 14:04:28 voipd[326]: Codec - (-) - audio
Sep 8 14:04:28 voipd[326]: bridgelimit: nConnections=0
Sep 8 14:04:28 voipd[326]: bridge lan set to full speed
Sep 8 14:04:28 voipd[326]: >>> Request: BYE sip:49xxxxxxxxxxxxxxx @sip.mgc.voip.telef
onica.de:5060
Sep 8 14:04:29 voipd[326]: Packets sent: 967 voice, 0 silence, 0 CN

Sep 8 14:04:29 voipd[326]: rtpsession packets 0 bytes 0 drop_tooshort 0
Sep 8 14:04:29 voipd[326]: drop_toolate 0 drop_nobuffer 0 drop_nonau
dio 0 wrong_seq 0
Sep 8 14:04:29 voipd[326]: packets lost 0 consumed from NG 0
Sep 8 14:04:29 voipd[326]: <<< Status: 200 Ok
Sep 8 14:04:29 voipd[326]: 49xxxxxxxxxxxxxx: BYE complete
Sep 8 14:04:29 voipd[326]: call to sip:[email protected] terminated (200)