A@H und HFC

[hrvill]

Hallo,

Ich habe nun schon Tage damit verbracht hier im Forum zu suchen und über die HFC-Karte rauszutelefonieren. Eingehende Anrufe funktioniert einwandfrei. Beim raustelefonieren kommt nur kurz Die gewählte Nummer ist nicht vergeben... und dann Target busy.

Hier meine zaptel.conf:

loadzone	= nl
defaultzone	= nl

span=1,1,3,ccs,ami
bchan=1-2
dchan=3

Hier meine zapata.conf:

;
; Zapata telephony interface
;
; Configuration file

;[trunkgroups]

[channels]

language=de
switchtype = euroisdn
context=from-pstn
signalling=bri_cpe_ptmp
channel => 1-2
pridialplan=local
prilocaldialpla=local
rxwink=300		; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes

usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
echotraining=800
rxgain=0.0
txgain=0.0
nationalprefix=0
internationalprefix=00
group=0
callgroup=1
pickupgroup=1
immediate=yes

;faxdetect=both
faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no

;Include genzaptelconf configs
#include zapata-auto.conf

;Include AMP configs
#include zapata_additional.conf

zapata_additional.conf:

;;;;;;[407128]
signalling=bri_cpe_ptmp
record_out=Always
record_in=Always
mailbox=407128@device
echotraining=800
echocancelwhenbridged=yes
echocancel=yes
context=from-pstn
callprogress=no
callerid=device <407128>
busydetect=no
busycount=7
channel=>1-2

extensions_additional.conf

[globals]
#include globals_custom.conf
VM_PREFIX = *
RINGTIMER = 15
REGTIME = 7:55-17:05
REGDAYS = mon-fri
RECORDEXTEN = ""
PARKNOTIFY = SIP/200
OUT_1 = ZAP/g0
OUTPREFIX_1 = 0
OUTMAXCHANS_1 = 2
OUTCID_1 = 407128
OPERATOR = 
NULL = ""
IN_OVERRIDE = none
INCOMING = EXT-100
FAX_RX_EMAIL = [email protected]
FAX_RX = system
FAX = 
DIRECTORY_OPTS = 
DIRECTORY = last
DIAL_OUT = 9
DIAL_OPTIONS = tr
DIALOUTIDS = 1/
CALLFILENAME = ""
AFTER_INCOMING = EXT-100

[ext-local]
include => ext-local-custom
exten => 100,1,Macro(exten-vm,100,100)
exten => ${VM_PREFIX}100,1,Macro(vm,100)
exten => 100,hint,SIP/100
exten => 101,1,Macro(exten-vm,101,101)
exten => ${VM_PREFIX}101,1,Macro(vm,101)
exten => 101,hint,SIP/101
exten => 102,1,Macro(exten-vm,102,102)
exten => ${VM_PREFIX}102,1,Macro(vm,102)
exten => 102,hint,SIP/102
exten => 407128,1,Macro(exten-vm,novm,407128)
exten => 407128,hint,ZAP/g0/

[outbound-allroutes]
include => outbound-allroutes-custom
include => outrt-001-9_outside

[outrt-001-9_outside]
include => outrt-001-9_outside-custom
exten => _9.,1,Macro(dialout-trunk,1,${EXTEN:1},)
exten => _9.,2,Macro(outisbusy)	; No available circuits

Es wäre super wenn jemand helfen könnte.

Gruss
hrvill

 

[heinz.rahn]

Hallo auch,

Hier meine zapata.conf:

prilocaldialpla=local
.................^ da haste ein n vergessen

Grüsse
Heinz