Hallo,
beim Asterisk kommt immer die Fehlermeldung "Unable to create channel of type 'SCCP' " bei einem Versuch ein Gespräch aufzubauen. Ich denke das liegt an der extensions.conf:
[wct-internal]
exten => 5001,1,SetCalledParty("Phone1"<5001>)
exten => 5001,2,Dial(SCCP/Phone1,10,tr)
exten => 5002,1,SetCalledParty("Phone2"<5002>)
exten => 5002,2,Dial(SCCP/Phone2,10,tr)
exten => 5003,1,SetCalledParty("WLAN"<5003>)
exten => 5003,2,Dial(SCCP/WLAN,10,tr)
oder an der sccp.conf:
[devices]
type = 7940
description = Phone1
tzoffset = -6
autologin = 5001
device => SEP00124324C15E
type = 7940
description = Phone2
tzoffset = -6
autologin = 5002
device => SEP00124330C0B6
type = 7920
description = WLAN
tzoffset = -6
autologin = 5003
device => SEP00152BACCFA6
[lines]
id = 5001
pin = 1234
label = Phone1
description = Line5001
context = wct-internal
incominglimit = 2
mailbox = [EMAIL PROTECTED]
vmnum = 8501
cid_name = Phone1
cid_num = 5001
line => 5001
id = 5002
pin = 1234
label = Phone2
description = Line5002
context = wct-internal
incominglimit = 2
mailbox = [EMAIL PROTECTED]
vmnum = 8502
cid_name = Phone2
cid_num = 5002
line => 5002
id = 5003
pin = 1234
label = WLAN
description = Line5003
context = wct-internal
incominglimit = 2
mailbox = [EMAIL PROTECTED]
vmnum = 8503
cid_name = WLAN
cid_num = 5003
line => 5003
Kann mir jemand weiterhelfen?
Danke!
Gruß Danny
beim Asterisk kommt immer die Fehlermeldung "Unable to create channel of type 'SCCP' " bei einem Versuch ein Gespräch aufzubauen. Ich denke das liegt an der extensions.conf:
[wct-internal]
exten => 5001,1,SetCalledParty("Phone1"<5001>)
exten => 5001,2,Dial(SCCP/Phone1,10,tr)
exten => 5002,1,SetCalledParty("Phone2"<5002>)
exten => 5002,2,Dial(SCCP/Phone2,10,tr)
exten => 5003,1,SetCalledParty("WLAN"<5003>)
exten => 5003,2,Dial(SCCP/WLAN,10,tr)
oder an der sccp.conf:
[devices]
type = 7940
description = Phone1
tzoffset = -6
autologin = 5001
device => SEP00124324C15E
type = 7940
description = Phone2
tzoffset = -6
autologin = 5002
device => SEP00124330C0B6
type = 7920
description = WLAN
tzoffset = -6
autologin = 5003
device => SEP00152BACCFA6
[lines]
id = 5001
pin = 1234
label = Phone1
description = Line5001
context = wct-internal
incominglimit = 2
mailbox = [EMAIL PROTECTED]
vmnum = 8501
cid_name = Phone1
cid_num = 5001
line => 5001
id = 5002
pin = 1234
label = Phone2
description = Line5002
context = wct-internal
incominglimit = 2
mailbox = [EMAIL PROTECTED]
vmnum = 8502
cid_name = Phone2
cid_num = 5002
line => 5002
id = 5003
pin = 1234
label = WLAN
description = Line5003
context = wct-internal
incominglimit = 2
mailbox = [EMAIL PROTECTED]
vmnum = 8503
cid_name = WLAN
cid_num = 5003
line => 5003
Kann mir jemand weiterhelfen?
Danke!
Gruß Danny