Hallo zusammen,
so, habe zielmich viel Zeit mit der Qos-BinTec-Sache verbracht.
Dieses Thema scheint irgendwie ein Tabu zu sein und falls man doch fragen stellt, werden im Endeffekt NUR sehr teuere Seminare angeboten.
Hier sind die Ergebnisse meiner Nachforschungen und bei den BinTec-Experten, die damit ihr Brot verdienen, möchte ich mich dabei entschuldigen
Laut qospolicystattable läuft das Ganze bei mir einwandfrei, bin doch
nicht ganz mit der Sprachqualität zufrieden, wenn ich z.B. gleichzeitig bei mehreren Rechnern Fernwartung mache bzw. Upload stark belaste...
Für Eure Meinung bzw. Korrekturen wäre ich dankbar!
X1200 Setup Tool BinTec Communications AG
[QOS][FILTER][][EDIT] Aachen
_______________________________________________________________________________
Description VoIP
Index 1
Protocol any
Source Address
Source Mask
Source Port any
Destination Address 192.168.77.21
Destination Mask 255.255.255.255
Destination Port any
Type of Service (TOS) 00000000 TOS Mask 00000000
SAVE CANCEL
_______________________________________________________________________________
Enter string, max length = 48 chars
X1200 Setup Tool BinTec Communications AG
[QOS][CLASS][EDIT] Aachen
_______________________________________________________________________________
Index 1
Filter VoIP (1)
Direction both
Action classify & set TOS M
Classification >
Signalling (TOS) >
Next Rule none
SAVE CANCEL
_______________________________________________________________________________
Use <Space> to select
X1200 Setup Tool BinTec Communications AG
[QOS][CLASS][EDIT][CLASS]: Configure IP QoS Classification Aachen
_______________________________________________________________________________
Class Type high priority
OK CANCEL
_______________________________________________________________________________
Use <Space> to select
X1200 Setup Tool BinTec Communications AG
[QOS][CLASS][EDIT][SIG]: Configure IP QoS Signalling Aachen
_______________________________________________________________________________
Set Type of Service (TOS) Field 00000000
Specify ToS Set Rate Limitation none
OK CANCEL
_______________________________________________________________________________
Enter binary number range 00000000..11111111
X1200 Setup Tool BinTec Communications AG
[QOS][CLASS]: Configure IP QoS Classification and Signalling Aachen
_______________________________________________________________________________
Abbreviations: RI (Rule Index) M (Action if filter matches)
FI (Filter Index) !M (Action if filter does not match)
NRI (Next Rule Index)
RI FI NRI Action Filter Conditions
1 1 0 classify & set TOS M VoIP da 192.168.77.21/32 both (h
ADD DELETE REORG EXIT
_______________________________________________________________________________
Press <Ctrl-n>, <Ctrl-p> to scroll, <Space> tag/untag DELETE, <Return> to edit
X1200 Setup Tool BinTec Communications AG
[QOS][INTERFACES][EDIT] Aachen
_______________________________________________________________________________
Interface en1-0
IP QoS Classification via RI 1 FI 1 (VoIP)
QoS Scheduling and Shaping >
Class-Based QoS Policies >
SAVE CANCEL
_______________________________________________________________________________
Use <Space> to select
X1200 Setup Tool BinTec Communications AG
[QOS][INTERFACES][EDIT][SCHEDULER]: Configure QoS Scheduling and Shaping Aachen
_______________________________________________________________________________
Queueing and Scheduling Algorithm priority queueing (PQ)
Specify Traffic Shaping no
OK CANCEL
_______________________________________________________________________________
Use <Space> to select
X1200 Setup Tool BinTec Communications AG
[QOS][INTERFACES][EDIT][POLICY]: Configure QoS Policies Aachen
_______________________________________________________________________________
Configure QoS Policies
Type ID Tx Rate Limitation
default 0 not bounded
high priority 0 bounded
ADD DELETE EXIT
_______________________________________________________________________________
Press <Ctrl-n>, <Ctrl-p> to scroll, <Space> tag/untag DELETE, <Return> to edit
X1200 Setup Tool BinTec Communications AG
[QOS][INTERFACES]: Enable IP QoS Classification and Policies Aachen
_______________________________________________________________________________
Interface First Rule First Filter Scheduler TxRate Limit
Baustelle no IP QoS classification =
Format7 no IP QoS classification |
VPN2 no IP QoS classification |
T_ONLINE no IP QoS classification |
Trier no IP QoS classification |
en1-0 1 1 (VoIP) PQ |
en1-0-snap no IP QoS classification |
en3-0 no IP QoS classification |
en3-0-snap no IP QoS classification |
luxemburg no IP QoS classification |
procserv no IP QoS classification v
EXIT
_______________________________________________________________________________
Press <Ctrl-n>, <Ctrl-p> to scroll, <Return> to edit/select
Aachen:> qospolicystattable
inx IfIndex(*ro) Type(ro) ClassId(ro)
OutPkts(ro) OutOctets(ro) PktsQueued(ro)
OctetsQueued(ro) PktsDropped(ro) OctetsDropped(ro)
00 1000 default 0
4007319 2779140618 0
0 0 0
01 1000 high_priority 0
1086528 246825271 0
0 0 0
Aachen:qosPolicyStatTable> qospolicystattable
inx IfIndex(*ro) Type(ro) ClassId(ro)
OutPkts(ro) OutOctets(ro) PktsQueued(ro)
OctetsQueued(ro) PktsDropped(ro) OctetsDropped(ro)
00 1000 default 0
4007323 2779141565 0
0 0 0
01 1000 high_priority 0
1086620 246843583 0
0 0 0
Aachen:qosPolicyStatTable>