Hi
i've got an old 7050 which i've used for years. recently i've noticed a problem in that i'm not able to access my LAN over WiFi and LanB.
the set up i have is as follows:
DSL -> 7050
7050 acts as gateway, of course
LANA -> connects to DHCP and DNS server (winserver 2003) via a router. all other LAN devices are connected to this router.
LANA -> fixed IP of 10.8.0.1
neither lanB nor the wifi will allow communication with lanA or the network behind it. do i need to set up a manual bridge or something?
in network settings the box 'all computers are located in the same network' is checked.
the 7050 does NOT act as a DHCP server.
this is the output from an ifconfig on the box
and this is the output of a brctl show
any help would be much appreciated.
i've got an old 7050 which i've used for years. recently i've noticed a problem in that i'm not able to access my LAN over WiFi and LanB.
the set up i have is as follows:
DSL -> 7050
7050 acts as gateway, of course
LANA -> connects to DHCP and DNS server (winserver 2003) via a router. all other LAN devices are connected to this router.
LANA -> fixed IP of 10.8.0.1
neither lanB nor the wifi will allow communication with lanA or the network behind it. do i need to set up a manual bridge or something?
in network settings the box 'all computers are located in the same network' is checked.
the 7050 does NOT act as a DHCP server.
this is the output from an ifconfig on the box
Code:
dsl Link encap:Point-Point Protocol
inet addr:192.168.179.1 P-t-P:192.168.179.1 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP ALLMULTI MULTICAST MTU:1500 Metric:1
RX packets:7190287 errors:0 dropped:0 overruns:0 frame:0
TX packets:7815205 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:561773971 (535.7 MiB) TX bytes:875661591 (835.0 MiB)
eth0 Link encap:Ethernet HWaddr 00:15:0C:97:46:1E
UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1
RX packets:7888367 errors:0 dropped:0 overruns:0 frame:0
TX packets:7160947 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:978218164 (932.9 MiB) TX bytes:634307692 (604.9 MiB)
eth1 Link encap:Ethernet HWaddr 00:15:0C:97:46:1F
UP BROADCAST ALLMULTI MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Base address:0x2800
lan Link encap:Ethernet HWaddr 00:15:0C:97:46:1E
inet addr:10.8.0.1 Bcast:10.255.255.255 Mask:255.255.255.0
UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1
RX packets:7889940 errors:0 dropped:0 overruns:0 frame:0
TX packets:7158722 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:868623530 (828.3 MiB) TX bytes:633403910 (604.0 MiB)
lan:0 Link encap:Ethernet HWaddr 00:15:0C:97:46:1E
inet addr:192.168.178.254 Bcast:192.168.178.255 Mask:255.255.255.0
UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4321 errors:0 dropped:0 overruns:0 frame:0
TX packets:4321 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:289688 (282.8 KiB) TX bytes:289688 (282.8 KiB)
tap0 Link encap:Ethernet HWaddr 00:FF:4F:EE:24:DF
inet addr:10.8.0.136 Bcast:10.8.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:110938 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 B) TX bytes:26186657 (24.9 MiB)
usbrndis Link encap:Ethernet HWaddr 00:15:0C:97:46:22
UP BROADCAST ALLMULTI MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)and this is the output of a brctl show
Code:
# ./brctl show
bridge name bridge id STP enabled interfaces
lan 8000.00150c97461e no eth0
usbrndis
eth1any help would be much appreciated.