.titleBar { margin-bottom: 5px!important; }

Firmware 2.0.11(GWa) verfügbar

Dieses Thema im Forum "Linksys (VoIP)" wurde erstellt von bodhran, 14 Okt. 2004.

Status des Themas:
Es sind keine weiteren Antworten möglich.
  1. bodhran

    bodhran Guest

    Code:
    Release Notes for 2.0.11(GWa) -- Sipura Phone Adapter
    
    SPA-3000 -- 1 Port FXS, 1 Port FXO, 1 Ethernet Interface
    
    Copyright (C) 2003-2004 Sipura Technology Inc.
    
    * * * * * * * * * * IMPORTANT * * * * * * * * * * * * * * * *  *
    * Use of Proprietary Information and Copyright Notice:         *
    * This release note document contains proprietary information  *
    * that is to be used only by Sipura Technology customers.      *
    * Any unauthorized disclosure, copying, distribution, or use   *
    * of this information is prohibited. This restriction includes * 
    * ALL Internet based discussion forums, e.g. DSLreports.       *
    * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *  *
    
    Bug Fixes
    ===========================================================
    -- since 2.0.10(GWf) --
    01. BUG ID=221
       SPA does not bypass stun and natmapping when ringing through Line 1
       from the PSTN
    
    02. BUGID=00225
        Removed clicking noise in G729 encoder and
        static noise associated with G726r24 an G726r40 encoder
            
    New Features and Enhancements
    ===========================================================
    -- since 2.0.10(GWf) --
    01. Added <RTP Log Intvl> Line 1/PSTN Line option to control how often to log
        RTP stats for each active call. Units in seconds. 0 means do not log. 
        (debug level 1). Formats are:
        [<line-id>:]Tx:dst=,ssrc=,pt=,p=,o=
        [<line-id>:]Rx:src=,ssrc=,id>,pt=,p=,o=,L=,j=,l=
        
        Note: line-id = 0/1 for Line 1/PSTN Line
    
    02. Log Regsiter OK and failed events (debug level 3)
        Format are:
    
        [<line-id>]RegOK. NextReg in <(sec)>
        [<line-id>]RegFail. Retry in 
    
        Note: line-id = 0/1 for Line 1/PSTN Line
        Note: retry-delay = 0 => no more retry (until reboot)
    
    03. Support called number distinctive ringing for FXS port.
        The called number is extracted from the To header user-id field.
        To configure a ring for a special called number, enter
        @<called-number> (such as @14089991234) in 
        parameter (under User 1 tab on spa config web page).
    
    04. Treat it as anonymous call if From header user-id or display name
        is "Anonymous" (case-insensitive, quotes ignored). Before only
        the display name is checked.
    
     
  2. exim

    exim Admin a.D.

    Registriert seit:
    27 Apr. 2004
    Beiträge:
    1,013
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
Status des Themas:
Es sind keine weiteren Antworten möglich.