[Gelöst] Fritzbox 7340: flashing whatever current trunk image bricks the router

Status
Für weitere Antworten geschlossen.

Melchior

Neuer User
Mitglied seit
14 Okt 2011
Beiträge
40
Punkte für Reaktionen
0
Punkte
0
When I try to flash the Fritzbox 7340 with, for example, a minimal current trunk image, the router dies.

Only with an official image I can revive it with the standard recovery tool. Also, I needed to use rukerneltool after even the standard recovery tool failed to deliver.

Before, I could flash whatever image, but not anymore...

Help is much appreciated.

Solved: In my case, the new 7941 revision made it possible again to use Freetz on the Fritzbox 7340.

There was a typo in an earlier revisions turning Fritzbox into bricks.
 
Zuletzt bearbeitet:
Very similar to this.
Greets,

JD.
 
Indeed, and in this thread is yet another referral to a thread about similar problems with the 7390.

A lot of reading.... sigh...
 
I have the same problem with a fresh trunk on 7270v2

compiling a basic international firmware for my device generate an image that brick the fritzbox.

Serial output:
Code:
...
executing /etc/init.d/S10-html
executing /etc/init.d/S10-vm
executing /etc/init.d/S11-config_def
executing /etc/init.d/S11-piglet

[avm_debug]standard kernel-messages
[piglet]use gpio-settings for 139
patch_dectfw: patch_adress: 7a82 max_len: 22 with Version 2 Len: 16
patch_dectfw: c0ab8000, datalen = 34417,
dect_loader(first): unknown c0 in state dect_wait_for_ack received
dect_loader(first): unknown fe in state dect_wait_for_ack received
dect_loader(first): unknown 80 in state dect_wait_for_ack received
dect_loader(first): unknown f7 in state dect_wait_for_ack received
dect_loader(first): unknown f8 in state dect_wait_for_ack received
dect_loader(first): unknown 3e in state dect_wait_for_ack received
dect_loader(first): unknown 7f in state dect_wait_for_ack received

dect_loader(first): crc failure (01ce) 2 47
dect_file_process: error on upload firstloader '/lib/modules/dectfw_firstlevel.hex'
Call Trace:
[<9441516c>] dump_stack+0x8/0x34
[<944151cc>] panic+0x34/0x19c
[<c0a5a2d4>] init_module+0x2d4/0x2ec [Piglet_noemif]
[<9410006c>] do_one_initcall+0x6c/0x1fc

Kernel panic - not syncing:
[piglet]panic: Can't load dect-fw!

WARNING: use tffs in panic mode (minor 96)
Rebooting in 3 seconds..
 
The svn server is up again, serving you revision 7941. Maybe this one solves it?
 
I have the same problem with a fresh trunk on 7270v2

compiling a basic international firmware for my device generate an image that brick the fritzbox.

Serial output:
Code:
...
executing /etc/init.d/S10-html
executing /etc/init.d/S10-vm
executing /etc/init.d/S11-config_def
executing /etc/init.d/S11-piglet

[avm_debug]standard kernel-messages
[piglet]use gpio-settings for 139
patch_dectfw: patch_adress: 7a82 max_len: 22 with Version 2 Len: 16
patch_dectfw: c0ab8000, datalen = 34417,
dect_loader(first): unknown c0 in state dect_wait_for_ack received
dect_loader(first): unknown fe in state dect_wait_for_ack received
dect_loader(first): unknown 80 in state dect_wait_for_ack received
dect_loader(first): unknown f7 in state dect_wait_for_ack received
dect_loader(first): unknown f8 in state dect_wait_for_ack received
dect_loader(first): unknown 3e in state dect_wait_for_ack received
dect_loader(first): unknown 7f in state dect_wait_for_ack received

dect_loader(first): crc failure (01ce) 2 47
dect_file_process: error on upload firstloader '/lib/modules/dectfw_firstlevel.hex'
Call Trace:
[<9441516c>] dump_stack+0x8/0x34
[<944151cc>] panic+0x34/0x19c
[<c0a5a2d4>] init_module+0x2d4/0x2ec [Piglet_noemif]
[<9410006c>] do_one_initcall+0x6c/0x1fc

Kernel panic - not syncing:
[piglet]panic: Can't load dect-fw!

WARNING: use tffs in panic mode (minor 96)
Rebooting in 3 seconds..[/QUOTE]

Now it boot but dect doesn't works and I get other errors and fritzbox is unavailable in my network:

[code]...
AVMMULTID: /etc/init.d/rc.multid: /etc/init.d/modlibrc: line 412: syntax error: unterminated quoted string
...
/etc/init.d/rc.S: /etc/init.d/S76-media: line 6: /etc/init.d/rc.media: not found
...
executing /etc/init.d/S99-zzz-rcmod

/etc/init.d/rc.S: /etc/init.d/modlibrc: line 412: syntax error: unterminated quoted string
...
root@fritz:/var/mod/root# ifconfig 

ath0      Link encap:Ethernet  HWaddr ******************  

          UP BROADCAST RUNNING MULTICAST  MTU:2290  Metric:1

          RX packets:0 errors:0 dropped:0 overruns:0 frame:0

          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:1000 

          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)



cpmac0    Link encap:Ethernet  HWaddr ******************  

          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

          RX packets:0 errors:0 dropped:0 overruns:0 frame:0

          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:1000 

          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)



lo        Link encap:Local Loopback  

          inet addr:127.0.0.1  Mask:255.0.0.0

          UP LOOPBACK RUNNING  MTU:16436  Metric:1

          RX packets:389 errors:0 dropped:0 overruns:0 frame:0

          TX packets:389 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:0 

          RX bytes:65195 (63.6 KiB)  TX bytes:65195 (63.6 KiB)



wifi0     Link encap:Ethernet  HWaddr ******************
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

          RX packets:44 errors:0 dropped:0 overruns:0 frame:2

          TX packets:36 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:1000 

          RX bytes:7503 (7.3 KiB)  TX bytes:3743 (3.6 KiB)

          Interrupt:80 Memory:c2220000-c2230000 



root@fritz:/var/mod/root#
 
Did you use the new revision 7941 or up?

Did you select the 'remove chronyd' option?
 
Can we close here? Or do you still have problems?

Regards
Oliver
 
Closed.

Regards
Oliver
 
Status
Für weitere Antworten geschlossen.
Holen Sie sich 3CX - völlig kostenlos!
Verbinden Sie Ihr Team und Ihre Kunden Telefonie Livechat Videokonferenzen

Gehostet oder selbst-verwaltet. Für bis zu 10 Nutzer dauerhaft kostenlos. Keine Kreditkartendetails erforderlich. Ohne Risiko testen.

3CX
Für diese E-Mail-Adresse besteht bereits ein 3CX-Konto. Sie werden zum Kundenportal weitergeleitet, wo Sie sich anmelden oder Ihr Passwort zurücksetzen können, falls Sie dieses vergessen haben.