GELÖST: Kernel-Panic wenn angerufene abhebt.

jackfritt

Mitglied
Mitglied seit
28 Dez 2005
Beiträge
329
Punkte für Reaktionen
0
Punkte
16
Ich habe hier ein Problem.
Ich habe ein ISDN Telefon (gespeist über einen NTBA) an der HFC-PCI und
wähle eine Nummer diese wird uber den 1 Port der BN4S0 hergestellt.
Nimmt nun der Angerufenen ab kommt sofort ein Kernel-Panic.
Was mache ich hier falsch ???? Benutze ich den Port 4 von meiner BN4S0 als internen S0 für das Telefon geht das ganze.
Was könnte ich noch machen um das Problem zu lösen ?

Code:
   -- Executing Set("mISDN/5-1", "LANGUAGE()=de") in new stack
    -- Executing SetMusicOnHold("mISDN/5-1", "default") in new stack
    -- Executing Set("mISDN/5-1", "CALLERID(number)=91930") in new stack
    -- Executing Dial("mISDN/5-1", "misdn/g:port1-3/01||") in new stack
P[ 1] Group [port1-3] Port [1]
P[ 1] portup:1
P[ 1] * Queuing chan 0x8203d40
P[ 1]  --> TON: Unknown
P[ 1]  --> LTON: Unknown
P[ 1]  --> CTON: Unknown
P[ 1] * CALL: g:port1-3/01
P[ 1]  --> * dad:xx tech:mISDN/1-u1 ctx:Extern
P[ 1]  --> * adding2newbc ext 01
P[ 1]  --> * adding2newbc callerid 91930
P[ 1] update_config: Getting Config
P[ 1]  --> pres: -1 screen: -1
P[ 1]  --> pres: 0
P[ 1]  --> PRES: Allowed (0x0)
P[ 1]  --> SCREEN: Unscreened (0x0)
P[ 1] IMPORT_PID: importing pid:7
P[ 1] NO OPTS GIVEN
P[ 1] I SEND:SETUP oad:91930 dad:xx pid:8
P[ 1]  --> bc_state:BCHAN_CLEANED
P[ 1]  --> channel:0 mode:TE cause:16 ocause:16 rad: cad:
P[ 1]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 1]  --> screen:0 --> pres:0
P[ 1]  --> addr:0 l3id:70001 b_stid:0 layer_id:50010180
P[ 1]  --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] find_free_chan: req_chan:0
P[ 1]  --> found chan: 1
P[ 1]  -->  found channel: 1
P[ 1] --> new_l3id 70002
P[ 1] Sending msg, prim:30580 addr:41000104 dinfo:70002
P[ 1]  --> * SEND: State Dialing pid:8
    -- Called g:port1-3/01
P[ 1] handle_frm: frm->addr:42000103 frm->prim:30d82
P[ 1] set_channel: bc->channel:1 channel:1
P[ 1] setup_bc: with dsp
P[ 1]  --> Channel is 1
P[ 1]  --> TRANSPARENT Mode
P[ 1] set_chan_in_stack: 1
P[ 1] I IND :SETUP_ACKNOWLEDGE oad:91930 dad:xx pid:8 state:CALLING
P[ 1]  --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 1]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1]  --> screen:0 --> pres:0
P[ 1]  --> addr:50010102 l3id:70002 b_stid:10010100 layer_id:50010180
P[ 1]  --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1]  --> bc_state:BCHAN_ACTIVATED
P[ 1] BCHAN: bchan ACT Confirm pid:8
P[ 5] I IND :INFORMATION oad:28 dad:xx pid:7 state:DIALING
P[ 5]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 5]  --> info_dad:5 onumplan:0 dnumplan:  rnumplan:  cpnnumplan:0
P[ 5]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 5]  --> screen:0 --> pres:0
P[ 5]  --> addr:50010502 l3id:10040 b_stid:10010500 layer_id:50010580
P[ 5]  --> facility:FAC_NONE out_facility:FAC_NONE
P[ 5]  --> bc_state:BCHAN_ACTIVATED
P[ 5]  --> None
P[ 1] * IND : Digit 5
P[ 1] I SEND:INFORMATION oad:91930 dad:0xxx pid:8
P[ 1]  --> bc_state:BCHAN_ACTIVATED
P[ 1]  --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 1]  --> info_dad:5 onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 1]  --> screen:0 --> pres:0
P[ 1]  --> addr:50010102 l3id:70002 b_stid:10010100 layer_id:50010180
P[ 1]  --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] Sending msg, prim:37b80 addr:41000104 dinfo:70002
P[ 5] I IND :INFORMATION oad:28 dad:0XX pid:7 state:DIALING
P[ 5]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 5]  --> info_dad:1 onumplan:0 dnumplan:  rnumplan:  cpnnumplan:0
P[ 5]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 5]  --> screen:0 --> pres:0
P[ 5]  --> addr:50010502 l3id:10040 b_stid:10010500 layer_id:50010580
P[ 5]  --> facility:FAC_NONE out_facility:FAC_NONE
P[ 5]  --> bc_state:BCHAN_ACTIVATED
P[ 5]  --> None
P[ 1] * IND : Digit 1
P[ 1] I SEND:INFORMATION oad:91930 dad:XXXX pid:8
P[ 1]  --> bc_state:BCHAN_ACTIVATED
P[ 1]  --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 1]  --> info_dad:1 onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 1]  --> screen:0 --> pres:0
P[ 1]  --> addr:50010102 l3id:70002 b_stid:10010100 layer_id:50010180
P[ 1]  --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] Sending msg, prim:37b80 addr:41000104 dinfo:70002
P[ 5] I IND :INFORMATION oad:28 dad:XXX pid:7 state:DIALING
P[ 5]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 5]  --> info_dad:1 onumplan:0 dnumplan:  rnumplan:  cpnnumplan:0
P[ 5]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 5]  --> screen:0 --> pres:0
P[ 5]  --> addr:50010502 l3id:10040 b_stid:10010500 layer_id:50010580
P[ 5]  --> facility:FAC_NONE out_facility:FAC_NONE
P[ 5]  --> bc_state:BCHAN_ACTIVATED
P[ 5]  --> None
P[ 1] * IND : Digit 1
P[ 1] I SEND:INFORMATION oad:91930 dad:0xxxxx1 pid:8
P[ 1]  --> bc_state:BCHAN_ACTIVATED
P[ 1]  --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 1]  --> info_dad:1 onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 1]  --> screen:0 --> pres:0
P[ 1]  --> addr:50010102 l3id:70002 b_stid:10010100 layer_id:50010180
P[ 1]  --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] Sending msg, prim:37b80 addr:41000104 dinfo:70002
P[ 5] I IND :INFORMATION oad:28 dad:0xxxxx1 pid:7 state:DIALING
P[ 5]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 5]  --> info_dad:6 onumplan:0 dnumplan:  rnumplan:  cpnnumplan:0
P[ 5]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 5]  --> screen:0 --> pres:0
P[ 5]  --> addr:50010502 l3id:10040 b_stid:10010500 layer_id:50010580
P[ 5]  --> facility:FAC_NONE out_facility:FAC_NONE
P[ 5]  --> bc_state:BCHAN_ACTIVATED
P[ 5]  --> None
P[ 1] * IND : Digit 6
P[ 1] I SEND:INFORMATION oad:91930 dad:0xxxxxx6 pid:8
P[ 1]  --> bc_state:BCHAN_ACTIVATED
P[ 1]  --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 1]  --> info_dad:6 onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 1]  --> screen:0 --> pres:0
P[ 1]  --> addr:50010102 l3id:70002 b_stid:10010100 layer_id:50010180
P[ 1]  --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] Sending msg, prim:37b80 addr:41000104 dinfo:70002
P[ 5] I IND :INFORMATION oad:28 dad:01xxxxxx6 pid:7 state:DIALING
P[ 5]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 5]  --> info_dad:2 onumplan:0 dnumplan:  rnumplan:  cpnnumplan:0
P[ 5]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 5]  --> screen:0 --> pres:0
P[ 5]  --> addr:50010502 l3id:10040 b_stid:10010500 layer_id:50010580
P[ 5]  --> facility:FAC_NONE out_facility:FAC_NONE
P[ 5]  --> bc_state:BCHAN_ACTIVATED
P[ 5]  --> None
P[ 1] * IND : Digit 2
P[ 1] I SEND:INFORMATION oad:91930 dad:01xxxxxx2 pid:8
P[ 1]  --> bc_state:BCHAN_ACTIVATED
P[ 1]  --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 1]  --> info_dad:2 onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 1]  --> screen:0 --> pres:0
P[ 1]  --> addr:50010102 l3id:70002 b_stid:10010100 layer_id:50010180
P[ 1]  --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] Sending msg, prim:37b80 addr:41000104 dinfo:70002
P[ 5] I IND :INFORMATION oad:28 dad:01xxxxxxx pid:7 state:DIALING
P[ 5]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 5]  --> info_dad:1 onumplan:0 dnumplan:  rnumplan:  cpnnumplan:0
P[ 5]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 5]  --> screen:0 --> pres:0
P[ 5]  --> addr:50010502 l3id:10040 b_stid:10010500 layer_id:50010580
P[ 5]  --> facility:FAC_NONE out_facility:FAC_NONE
P[ 5]  --> bc_state:BCHAN_ACTIVATED
P[ 5]  --> None
P[ 1] * IND : Digit 1
P[ 1] I SEND:INFORMATION oad:91930 dad:01xxxxxxxx pid:8
P[ 1]  --> bc_state:BCHAN_ACTIVATED
P[ 1]  --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 1]  --> info_dad:1 onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 1]  --> screen:0 --> pres:0
P[ 1]  --> addr:50010102 l3id:70002 b_stid:10010100 layer_id:50010180
P[ 1]  --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] Sending msg, prim:37b80 addr:41000104 dinfo:70002
P[ 5] I IND :INFORMATION oad:28 dad:01xxxxx21 pid:7 state:DIALING
P[ 5]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 5]  --> info_dad:4 onumplan:0 dnumplan:  rnumplan:  cpnnumplan:0
P[ 5]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 5]  --> screen:0 --> pres:0
P[ 5]  --> addr:50010502 l3id:10040 b_stid:10010500 layer_id:50010580
P[ 5]  --> facility:FAC_NONE out_facility:FAC_NONE
P[ 5]  --> bc_state:BCHAN_ACTIVATED
P[ 5]  --> None
P[ 1] * IND : Digit 4
P[ 1] I SEND:INFORMATION oad:91930 dad:01xxxxx14 pid:8
P[ 1]  --> bc_state:BCHAN_ACTIVATED
P[ 1]  --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 1]  --> info_dad:4 onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 1]  --> screen:0 --> pres:0
P[ 1]  --> addr:50010102 l3id:70002 b_stid:10010100 layer_id:50010180
P[ 1]  --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] Sending msg, prim:37b80 addr:41000104 dinfo:70002
P[ 5] I IND :INFORMATION oad:28 dad:015xxxxxx4 pid:7 state:DIALING
P[ 5]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 5]  --> info_dad:8 onumplan:0 dnumplan:  rnumplan:  cpnnumplan:0
P[ 5]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 5]  --> screen:0 --> pres:0
P[ 5]  --> addr:50010502 l3id:10040 b_stid:10010500 layer_id:50010580
P[ 5]  --> facility:FAC_NONE out_facility:FAC_NONE
P[ 5]  --> bc_state:BCHAN_ACTIVATED
P[ 5]  --> None
P[ 1] * IND : Digit 8
P[ 1] I SEND:INFORMATION oad:91930 dad:015xxxxxx48 pid:8
P[ 1]  --> bc_state:BCHAN_ACTIVATED
P[ 1]  --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 1]  --> info_dad:8 onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 1]  --> screen:0 --> pres:0
P[ 1]  --> addr:50010102 l3id:70002 b_stid:10010100 layer_id:50010180
P[ 1]  --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] Sending msg, prim:37b80 addr:41000104 dinfo:70002
P[ 5] I IND :INFORMATION oad:28 dad:015xxxxxx8 pid:7 state:DIALING
P[ 5]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 5]  --> info_dad:9 onumplan:0 dnumplan:  rnumplan:  cpnnumplan:0
P[ 5]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 5]  --> screen:0 --> pres:0
P[ 5]  --> addr:50010502 l3id:10040 b_stid:10010500 layer_id:50010580
P[ 5]  --> facility:FAC_NONE out_facility:FAC_NONE
P[ 5]  --> bc_state:BCHAN_ACTIVATED
P[ 5]  --> None
P[ 1] * IND : Digit 9
P[ 1] I SEND:INFORMATION oad:91930 dad:015xxxxxxx489 pid:8
P[ 1]  --> bc_state:BCHAN_ACTIVATED
P[ 1]  --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 1]  --> info_dad:9 onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 1]  --> screen:0 --> pres:0
P[ 1]  --> addr:50010102 l3id:70002 b_stid:10010100 layer_id:50010180
P[ 1]  --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] Sending msg, prim:37b80 addr:41000104 dinfo:70002
P[ 5] I IND :INFORMATION oad:28 dad:01xxxxxxxxx89 pid:7 state:DIALING
P[ 5]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 5]  --> info_dad:5 onumplan:0 dnumplan:  rnumplan:  cpnnumplan:0
P[ 5]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 5]  --> screen:0 --> pres:0
P[ 5]  --> addr:50010502 l3id:10040 b_stid:10010500 layer_id:50010580
P[ 5]  --> facility:FAC_NONE out_facility:FAC_NONE
P[ 5]  --> bc_state:BCHAN_ACTIVATED
P[ 5]  --> None
P[ 1] * IND : Digit 5
P[ 1] I SEND:INFORMATION oad:91930 dad:01XXXXX95 pid:8
P[ 1]  --> bc_state:BCHAN_ACTIVATED
P[ 1]  --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 1]  --> info_dad:5 onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 1]  --> screen:0 --> pres:0
P[ 1]  --> addr:50010102 l3id:70002 b_stid:10010100 layer_id:50010180
P[ 1]  --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] Sending msg, prim:37b80 addr:41000104 dinfo:70002
P[ 1] handle_frm: frm->addr:42000103 frm->prim:30182
P[ 1] $$$ bc already upsetted stid :10010100 (state:BCHAN_ACTIVATED)
P[ 1] set_chan_in_stack: 1
P[ 1] I IND :ALERTING oad:91930 dad:01XXXXXX5 pid:8 state:CALLING_ACKNOWLEDGE
P[ 1]  --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 1]  --> info_dad:5 onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 1]  --> screen:0 --> pres:0
P[ 1]  --> addr:50010102 l3id:70002 b_stid:10010100 layer_id:50010180
P[ 1]  --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1]  --> bc_state:BCHAN_ACTIVATED
P[ 1] Set State Ringing
P[ 1] We have no inband Data, the other end must create ringing
    -- mISDN/1-u1 is ringing
P[ 5] * IND : Indication [3] from 015116214895
P[ 5]  --> * IND :      ringing pid:7
P[ 5] I SEND:ALERTING oad:28 dad:0XXXXXXXXXX5 pid:7
P[ 5]  --> bc_state:BCHAN_ACTIVATED
P[ 5]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 5]  --> info_dad:5 onumplan:0 dnumplan:  rnumplan:  cpnnumplan:0
P[ 5]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 5]  --> screen:0 --> pres:0
P[ 5]  --> addr:50010502 l3id:10040 b_stid:10010500 layer_id:50010580
P[ 5]  --> facility:FAC_NONE out_facility:FAC_NONE
P[ 5] $$$ bc already upsetted stid :10010500 (state:BCHAN_ACTIVATED)
P[ 5] After SETUP BC
P[ 5]  --> other End is mISDN TE so it has inband info for sure (?)

Hebt der angerufene ab kommt der Kernel Crash

Code:
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	BUG: unable to handle kernel NULL pointer dereference
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	at virtual address 00000000
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	printing eip:
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	c013c5d2
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	*pde = 00000000
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	Oops: 0000 [#1]
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	Modules linked in:
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	netconsole
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	fcpci
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	mISDN_dsp
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	hfcpci
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	hfcmulti
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	mISDN_capi
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	l3udss1
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	mISDN_l2
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	mISDN_l1
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	mISDN_core
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	ide_cd
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	capi
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	kernelcapi
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	8139too
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	forcedeth
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	capifs
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	<010>
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	CPU:    0
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	EIP:    0060:[<c013c5d2>]    Tainted: P      VLI
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	EFLAGS: 00010002   (2.6.17.3 #8)
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	EIP is at put_page+0x2/0x40
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	eax: 00000000   ebx: 00000001   ecx: c32dd280   edx: 00000000
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	esi: df9b9960   edi: d4f89aba   ebp: c32dd200   esp: d4f87efc
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	ds: 007b   es: 007b   ss: 0068
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	Process mISDNStackd (pid: 5493, threadinfo=d4f86000 task=d48edab0)
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	<010>
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	Stack:
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	c02c7f0c
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	df9b9960
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	c32dd280
2006-08-16 11:28:07	Local7.Debug	192.168.100.1	c02c8068

Danke,

Jörg
 
Zuletzt bearbeitet:
Muss noch was zufügen an Info´s.
Leider funktioniert es auch mit Port 4 der BN4S0 nicht mehr. Ich dachte eigentlich es hätte dort funktioniert. Scheinbar zuviel Bäume gesehn.

Ich habe dann mal interne Nummern probiert und hier funktioniert es prima. Kein Kernelabsturz.

Jetz kommt der Knaller. Wenn ich vom Handy auf dieser Extension anrufe klappt alles prima ????

Ich verstehe nur noch Bahnhof.


Gruss,


Jörg
 
Hallo,

wie ist denn deine Kerneleinstellung bezüglich:
Code:
Processor type and features  --->Timer frequency

Unter meiner XEN-Installation musste ich (wenn bridging=yes in der misdn.conf eingestellt ist) diesen Wert auf 100Hz (vorher 250Hz) einstellen, damit keine Kernel "oopses" enstehen.

mfg Florian
 
Der Wert war:
Code:
    Timer frequency (1000 HZ)  --->

Habe ihn auf auf 100Hz geändert dann bekomme ich jeder Menge
Code:
kernel: rtc: lost some interrupts at 1024Hz
und immer noch den Kernel Crash.

Und bei 250Hz habe ich auch noch den Kernel Crash.

Habe sogar schon Karten getauscht. Auch keine Änderung.

:(


Gruss,


Jörg
 
Kernel 2.6.18-rc4 behebt das Problem auch nicht.
chan_misdn-0.3.1-rc20 löst es auch nicht.
Also wird wohl nur noch misdn selbst übrigbleiben. Leider habe ich nur die CVS Version.

Jetz sind die Freaks gefragt die sich damit auskennen.

Gruss,

Jörg
 
Zuletzt bearbeitet:
Ist schon seit einiger Zeit gelöst.

Danke an die mISDN Entwickler.

Gruss,

Jörg
 
hi jackfritt

ich habe genau das selbige Problem mit dem Interrupt

rtc: lost some interrupts at 1024Hz

Wenn du das ganze gelöst hast, könntest du mir eventuell diese Lösung zuteil werden lassen?

Würde mich darüber freuen.

Danke
 
ca. 7 Jahre her. Eventuell solltest du mal aktuelle Software einspielen :)

Gruss,

Jörg
 
Wie meinst du das mit aktueller Software?
Ich muss zugeben dass ich auf diesem Gebiet wirklich ein "Greenhorn" bin, aber das ganze schon so weit durchgeblickt und geprüft habe.

Ich benutze aktuell ein Asterisk 1.4.29.1 (bin auch schon am überlegen, ob ich das 1.6.* benutze) und Zaptel 1.1.12.1.

Habe aber gerade bemerkt, dass ich das ganze auch NUR mit mISDN statt Zaptel realisieren kann.

Denn sobald ich das Zaptelmodul lade, bringt er mir den Interruptfehler und Asterisk lässt sich nicht mehr starten.

Entlade ich aber das Zaptel und lade manuell das mISDN, funktioniert alles einwandfrei (laut LOG). Schon etwas seltsam finde ich...
oder was meinst du dazu?
 
Ich glaube das mISDN (1.1.7.x) was du nutzt wird nicht mehr supported. Also lass mal die Finger davon macht nur Ärger. zaptel is laut didium auch alt und soll durch dahdi ersetzt werden. asterisk 1.4.30 sollte aktuell sein. Also wie du siehst nutzt du recht alte Software. Will nich wissen welche Distri und kernel zu nutzt. Seit kernel 2.6.27 oder so is mISDN in halbwegs aktuller version im kernel.

Hast noch einen langen weg vor dir :) Viel Erfolg.
Schau mal auf misdn.org. Eventuell kannste dir da ein paar Howto´s anschauen zu mISDN.

Gruss,

Jörg
 
ich bin schon seit ca. September letzten Jahres mit diesem "Projekt" beauftragt ;)
Hab mittlerweile schon einiges ausprobiert von Ubuntu über Fedora und Suse bis hin zu Debian! Muss zugeben, dass ich eigentlich bisher mit Debian 4 Etch die besten Fortschritte gemacht hab.
Mein weitester Fortschritt war mit Debian 4.0 (Kernel 2.6.30-6-686) Asterisk 1.4.29.1 und mISDN 1_1_7_1.
Funktioniert soweit auch wirklich alles einwandfrei bis eben auf die Tatsache, dass ich bei externen Ruf das Interrupt problem bekomme.
Hab 2 HFC-PCI Karten verbaut, wovon sich eine mit 2 Jumpern konfigurieren lässt, was aber leider keinen Erfolg brachte.

Mit Zaptel, Dahdi, Bristuff etc bin ich entweder immer in Sackgassen gelandet oder hatte nur Totalabstürze!

Werd mit deinen Tipp mit dem misdn.org mal beherzigen und mich da mal durchlesen.

Hast du sonst noch eine Möglichkeit, woran das Interrupt-Problem liegen könnte?
 

Neueste Beiträge

Statistik des Forums

Themen
244,695
Beiträge
2,216,690
Mitglieder
371,314
Neuestes Mitglied
Gjorstn
Holen Sie sich 3CX - völlig kostenlos!
Verbinden Sie Ihr Team und Ihre Kunden Telefonie Livechat Videokonferenzen

Gehostet oder selbst-verwaltet. Für bis zu 10 Nutzer dauerhaft kostenlos. Keine Kreditkartendetails erforderlich. Ohne Risiko testen.

3CX
Für diese E-Mail-Adresse besteht bereits ein 3CX-Konto. Sie werden zum Kundenportal weitergeleitet, wo Sie sich anmelden oder Ihr Passwort zurücksetzen können, falls Sie dieses vergessen haben.