[Gelöst] Cisco 7942 SIP + Sipgate

dark_scorp · 11 Aug 2010

Gelöst,siehe Post3.

Hallo,

ich erhalte den Fehler 401 bei dieser Config. Hat jemand Ideen? Benutzer und Passwort habe ich eigentlich korrekt eingegeben. Auf dem Phone selbst steht immer "Registering". Bin hinter NAT Router, Phone ist derzeit aber noch exposed host.

Config SEPmac:

Code:

<device>
   <deviceProtocol>SIP</deviceProtocol>
   <sshUserId>cisco</sshUserId>
   <sshPassword>cisco</sshPassword>
   <devicePool>
      <dateTimeSetting>
         <dateTemplate>D/M/Ya</dateTemplate>
         <timeZone>Eastern Standard/Daylight Time</timeZone>
         <ntps>
              <ntp>
                  <name>129.69.1.153</name>
                  <ntpMode>Unicast</ntpMode>
              </ntp>
         </ntps>
      </dateTimeSetting>
      <callManagerGroup>
         <members>
            <member priority="0">
               <callManager>
                  <ports>
                     <ethernetPhonePort>2000</ethernetPhonePort>
                     <sipPort>5060</sipPort>
                     <securedSipPort>5061</securedSipPort>
                  </ports>
                  <processNodeName>217.10.79.9</processNodeName>
               </callManager>
            </member>
         </members>
      </callManagerGroup>
   </devicePool>
   <sipProfile>
      <sipProxies>
         <backupProxy>217.10.79.9</backupProxy>
         <backupProxyPort>5060</backupProxyPort>
         <emergencyProxy></emergencyProxy>
         <emergencyProxyPort></emergencyProxyPort>
         <outboundProxy>217.10.79.9</outboundProxy>
         <outboundProxyPort>5060</outboundProxyPort>
         <registerWithProxy>true</registerWithProxy>
      </sipProxies>
      <sipCallFeatures>
         <cnfJoinEnabled>true</cnfJoinEnabled>
         <callForwardURI>x--serviceuri-cfwdall</callForwardURI>
         <callPickupURI>x-cisco-serviceuri-pickup</callPickupURI>
         <callPickupListURI>x-cisco-serviceuri-opickup</callPickupListURI>
         <callPickupGroupURI>x-cisco-serviceuri-gpickup</callPickupGroupURI>
         <meetMeServiceURI>x-cisco-serviceuri-meetme</meetMeServiceURI>
         <abbreviatedDialURI>x-cisco-serviceuri-abbrdial</abbreviatedDialURI>
         <rfc2543Hold>false</rfc2543Hold>
         <callHoldRingback>2</callHoldRingback>
         <localCfwdEnable>true</localCfwdEnable>
         <semiAttendedTransfer>true</semiAttendedTransfer>
         <anonymousCallBlock>2</anonymousCallBlock>
         <callerIdBlocking>2</callerIdBlocking>
         <dndControl>1</dndControl>
         <remoteCcEnable>true</remoteCcEnable>
      </sipCallFeatures>
      <sipStack>
         <sipInviteRetx>6</sipInviteRetx>
         <sipRetx>10</sipRetx>
         <timerInviteExpires>180</timerInviteExpires>
         <timerRegisterExpires>3600</timerRegisterExpires>
         <timerRegisterDelta>5</timerRegisterDelta>
         <timerKeepAliveExpires>120</timerKeepAliveExpires>
         <timerSubscribeExpires>120</timerSubscribeExpires>
         <timerSubscribeDelta>5</timerSubscribeDelta>
         <timerT1>500</timerT1>
         <timerT2>4000</timerT2>
         <maxRedirects>70</maxRedirects>
         <remotePartyID>true</remotePartyID>
         <userInfo>None</userInfo>
      </sipStack>
      <autoAnswerTimer>1</autoAnswerTimer>
      <autoAnswerAltBehavior>false</autoAnswerAltBehavior>
      <autoAnswerOverride>true</autoAnswerOverride>
      <transferOnhookEnabled>false</transferOnhookEnabled>
      <enableVad>false</enableVad>
      <preferredCodec>g729</preferredCodec>
      <dtmfAvtPayload>101</dtmfAvtPayload>
      <dtmfDbLevel>3</dtmfDbLevel>
      <dtmfOutofBand>avt</dtmfOutofBand>
      <alwaysUsePrimeLine>false</alwaysUsePrimeLine>
      <alwaysUsePrimeLineVoiceMail>false</alwaysUsePrimeLineVoiceMail>
      <kpml>3</kpml>
      <natEnabled>false</natEnabled>
      <natAddress></natAddress>
      <phoneLabel>Frank</phoneLabel>
      <stutterMsgWaiting>1</stutterMsgWaiting>
      <callStats>false</callStats>
      <silentPeriodBetweenCallWaitingBursts>10</silentPeriodBetweenCallWaitingBursts>
      <disableLocalSpeedDialConfig>false</disableLocalSpeedDialConfig>
      <startMediaPort>16384</startMediaPort>
      <stopMediaPort>32766</stopMediaPort>
      <sipLines>
         <line button="1">
            <featureID>9</featureID>
            <featureLabel>Sipgate</featureLabel>
            <proxy>217.10.79.9</proxy>
            <port>5060</port>
            <name>403XXXX</name>
            <displayName>Frank</displayName>
            <autoAnswer>
               <autoAnswerEnabled>2</autoAnswerEnabled>
            </autoAnswer>
            <callWaiting>3</callWaiting>
            <authName>403....</authName>
            <authPassword>MeinPasswort</authPassword>
            <sharedLine>false</sharedLine>
            <messageWaitingLampPolicy>1</messageWaitingLampPolicy>
            <messagesNumber>*97</messagesNumber>
            <ringSettingIdle>4</ringSettingIdle>
            <ringSettingActive>5</ringSettingActive>
            <contact>403....</contact>
            <forwardCallInfoDisplay>
               <callerName>true</callerName>
               <callerNumber>false</callerNumber>
               <redirectedNumber>false</redirectedNumber>
               <dialedNumber>true</dialedNumber>
            </forwardCallInfoDisplay>
         </line>
      </sipLines>
      <voipControlPort>5060</voipControlPort>
      <dscpForAudio>184</dscpForAudio>
      <ringSettingBusyStationPolicy>0</ringSettingBusyStationPolicy>
      <dialTemplate>dialplan.xml</dialTemplate>
   </sipProfile>
   <commonProfile>
      <phonePassword></phonePassword>
      <backgroundImageAccess>true</backgroundImageAccess>
      <callLogBlfEnabled>1</callLogBlfEnabled>
   </commonProfile>
   <loadInformation>SIP42.8-5-3SR1S</loadInformation>
   <vendorConfig>
      <disableSpeaker>false</disableSpeaker>
      <disableSpeakerAndHeadset>false</disableSpeakerAndHeadset>
      <pcPort>0</pcPort>
      <settingsAccess>1</settingsAccess>
      <garp>0</garp>
      <voiceVlanAccess>0</voiceVlanAccess>
      <videoCapability>0</videoCapability>
      <autoSelectLineEnable>0</autoSelectLineEnable>
      <webAccess>0</webAccess>
      <spanToPCPort>0</spanToPCPort>
      <loggingDisplay>1</loggingDisplay>
      <loadServer></loadServer>
   </vendorConfig>
   <versionStamp></versionStamp>
   <networkLocale>US</networkLocale>
   <networkLocaleInfo>
      <name>US</name>
      <version>SIP42.8-5-3SR1S</version>
   </networkLocaleInfo>
   <deviceSecurityMode>1</deviceSecurityMode>
   <authenticationURL></authenticationURL>
   <directoryURL></directoryURL>
   <idleURL></idleURL>
   <informationURL></informationURL>
   <messagesURL></messagesURL>
   <proxyServerURL></proxyServerURL>
   <servicesURL>http://cisco.internect.net/</servicesURL>
   <dscpForSCCPPhoneConfig>96</dscpForSCCPPhoneConfig>
   <dscpForSCCPPhoneServices>0</dscpForSCCPPhoneServices>
   <dscpForCm2Dvce>96</dscpForCm2Dvce>
   <transportLayerProtocol>4</transportLayerProtocol>
   <capfAuthMode>0</capfAuthMode>
   <capfList>
      <capf>
         <phonePort>3804</phonePort>
      </capf>
   </capfList>
   <certHash></certHash>
   <encrConfig>false</encrConfig>
</device>

WireShark:

Code:

REGISTER sip:217.10.79.9 SIP/2.0

Via: SIP/2.0/UDP 172.16.1.80:5060;branch=z9hG4bK4ea63d3c

From: <sip:[email protected]>;tag=0023eb52dbe00002525a81c8-b6e73e4c

To: <sip:[email protected]>

Call-ID: [email protected]

Max-Forwards: 70

Date: Wed, 11 Aug 2010 18:37:13 GMT

CSeq: 101 REGISTER

User-Agent: Cisco-CP7942G/8.5.3

Contact: <sip:[email protected]:5060;transport=udp>;+sip.instance="<urn:uuid:00000000-0000-0000-0000-0023eb52dbe0>";+u.sip!model.ccm.cisco.com="434"

Supported: (null),X-cisco-xsi-7.0.1

Content-Length: 0

Expires: 3600



SIP/2.0 401 Unauthorized

Via: SIP/2.0/UDP 172.16.1.80:5060;rport=49525;received=95.223.3.102;branch=z9hG4bK4ea63d3c

From: <sip:[email protected]>;tag=0023eb52dbe00002525a81c8-b6e73e4c

To: <sip:[email protected]>;tag=8367f0f887e3954243ec30fa0f5db288.ee33

Call-ID: [email protected]

CSeq: 101 REGISTER

WWW-Authenticate: Digest realm="sipgate.de", nonce="4c62ef0572c347cb7c5e1ec3ad4ce27b703d3853"

Content-Length: 0

chaos2000 · 12 Aug 2010

warum arbeitest du eigentlich mit ip adressen und nicht sipgate.de?

dark_scorp · 12 Aug 2010

Weil ich alle Problemquellen ausschließen wollte. DNS Probleme können so nicht mehr auftreten.

Macht ja aber auch letztlich keinen Unterschied. Ich habe es aber auch bereits mit sipgate.de getestet. Kein Unterschied.

dark_scorp · 12 Aug 2010

Nach vielen Stunden Arbeit, läuft es nun. Ein Cisco 7942G mit SIP Image (SIP42.8-5-3SR1S) an Sipgate. In deutschem Datums- unmd Zeitformat.

Das Telefon läuft hinter einem NAT Router. Die Ports 5060 und 16384-16390 habe ich auf das Phone geforwarded. Zu den NAT Einstellung in der SEP[MAC].conf.xml sei gesagt, dass ich eine statische IP von meinem ISP habe und diese in "Nataddress" eingetragen habe. Sollte aber auch mit DynDNS Namen gehen, was ich aber nicht getestet habe.

In meinem TFTP Root habe ich außerdem die Dialplan.xml, eine mk-sip.jar (Aus einem CUCM ISO File), und im Ordner "US" die Datei "g3-tones.xml". Warum? Weil ich im Wireshark gesehen habe, dass diese angefordert werden. Kann ja nicht schaden.

Hier die SEPmac.conf.xml:

Code:

<device xsi:type="axl:XIPPhone" ctiid="1566023366">
   <deviceProtocol>SIP</deviceProtocol>
   <sshUserId>cisco</sshUserId>
   <sshPassword>cisco</sshPassword>
   <devicePool>
      <dateTimeSetting>
         <dateTemplate>D.M.YA</dateTemplate>
         <timeZone>Central Europe Standard/Daylight Time</timeZone>
         <ntps>
              <ntp>
                  <name>129.69.1.153</name>
                  <ntpMode>Unicast</ntpMode>
              </ntp>
         </ntps>
      </dateTimeSetting>
      <callManagerGroup>
         <members>
            <member priority="0">
               <callManager>
                  <ports>
                     <ethernetPhonePort>2000</ethernetPhonePort>
                     <sipPort>5060</sipPort>
                     <securedSipPort>5061</securedSipPort>
                  </ports>
                  <processNodeName>sipgate.de</processNodeName>
               </callManager>
            </member>
         </members>
      </callManagerGroup>
   </devicePool>
   <sipProfile>
      <sipProxies>
         <backupProxy></backupProxy>
         <backupProxyPort></backupProxyPort>
         <emergencyProxy></emergencyProxy>
         <emergencyProxyPort></emergencyProxyPort>
         <outboundProxy></outboundProxy>
         <outboundProxyPort></outboundProxyPort>
         <registerWithProxy>true</registerWithProxy>
      </sipProxies>
      <sipCallFeatures>
         <cnfJoinEnabled>true</cnfJoinEnabled>
         <callForwardURI>x--serviceuri-cfwdall</callForwardURI>
         <callPickupURI>x-cisco-serviceuri-pickup</callPickupURI>
         <callPickupListURI>x-cisco-serviceuri-opickup</callPickupListURI>
         <callPickupGroupURI>x-cisco-serviceuri-gpickup</callPickupGroupURI>
         <meetMeServiceURI>x-cisco-serviceuri-meetme</meetMeServiceURI>
         <abbreviatedDialURI>x-cisco-serviceuri-abbrdial</abbreviatedDialURI>
         <rfc2543Hold>false</rfc2543Hold>
         <callHoldRingback>2</callHoldRingback>
         <localCfwdEnable>true</localCfwdEnable>
         <semiAttendedTransfer>true</semiAttendedTransfer>
         <anonymousCallBlock>2</anonymousCallBlock>
         <callerIdBlocking>2</callerIdBlocking>
         <dndControl>0</dndControl>
         <remoteCcEnable>true</remoteCcEnable>
      </sipCallFeatures>
      <sipStack>
         <sipInviteRetx>6</sipInviteRetx>
         <sipRetx>10</sipRetx>
         <timerInviteExpires>180</timerInviteExpires>
         <timerRegisterExpires>3600</timerRegisterExpires>
         <timerRegisterDelta>5</timerRegisterDelta>
         <timerKeepAliveExpires>120</timerKeepAliveExpires>
         <timerSubscribeExpires>120</timerSubscribeExpires>
         <timerSubscribeDelta>5</timerSubscribeDelta>
         <timerT1>500</timerT1>
         <timerT2>4000</timerT2>
         <maxRedirects>70</maxRedirects>
         <remotePartyID>false</remotePartyID>
         <userInfo>None</userInfo>
      </sipStack>
      <autoAnswerTimer>1</autoAnswerTimer>
      <autoAnswerAltBehavior>false</autoAnswerAltBehavior>
      <autoAnswerOverride>true</autoAnswerOverride>
      <transferOnhookEnabled>false</transferOnhookEnabled>
      <enableVad>false</enableVad>
      <preferredCodec>g729a</preferredCodec>
      <dtmfAvtPayload>101</dtmfAvtPayload>
      <dtmfDbLevel>3</dtmfDbLevel>
      <dtmfOutofBand>avt</dtmfOutofBand>
      <alwaysUsePrimeLine>false</alwaysUsePrimeLine>
      <alwaysUsePrimeLineVoiceMail>false</alwaysUsePrimeLineVoiceMail>
      <kpml>3</kpml>
      <natReceivedProcessing>false</natReceivedProcessing>
      <natEnabled>true</natEnabled>
      <natAddress>DeineIPoderDynDNS</natAddress>
      <phoneLabel>DeinName</phoneLabel>
      <stutterMsgWaiting>1</stutterMsgWaiting>
      <callStats>false</callStats>
      <silentPeriodBetweenCallWaitingBursts>10</silentPeriodBetweenCallWaitingBursts>
      <disableLocalSpeedDialConfig>false</disableLocalSpeedDialConfig>
      <startMediaPort>16384</startMediaPort>
      <stopMediaPort>16390</stopMediaPort>
      <sipLines>
         <line button="1">
            <featureID>9</featureID>
            <featureLabel>Deinenummer</featureLabel>
            <proxy>sipgate.de</proxy>
            <port>5060</port>
            <name>xxxxx</name>
            <displayName>DeinName</displayName>
            <autoAnswer>
               <autoAnswerEnabled>2</autoAnswerEnabled>
            </autoAnswer>
            <callWaiting>3</callWaiting>
            <authName>xxxx</authName>
            <authPassword>xxxx</authPassword>
            <sharedLine>false</sharedLine>
            <messageWaitingLampPolicy>1</messageWaitingLampPolicy>
            <messagesNumber>*97</messagesNumber>
            <ringSettingIdle>4</ringSettingIdle>
            <ringSettingActive>5</ringSettingActive>
            <contact>xxxx</contact>
            <forwardCallInfoDisplay>
               <callerName>true</callerName>
               <callerNumber>false</callerNumber>
               <redirectedNumber>false</redirectedNumber>
               <dialedNumber>true</dialedNumber>
            </forwardCallInfoDisplay>
         </line>
      </sipLines>
      <voipControlPort>5060</voipControlPort>
      <dscpForAudio>184</dscpForAudio>
      <ringSettingBusyStationPolicy>0</ringSettingBusyStationPolicy>
      <dialTemplate>dialplan.xml</dialTemplate>
   </sipProfile>
   <commonProfile>
      <phonePassword></phonePassword>
      <backgroundImageAccess>true</backgroundImageAccess>
      <callLogBlfEnabled>2</callLogBlfEnabled>
   </commonProfile>
   <loadInformation>SIP42.8-5-3SR1S</loadInformation>
   <vendorConfig>
      <disableSpeaker>false</disableSpeaker>
      <disableSpeakerAndHeadset>false</disableSpeakerAndHeadset>
      <pcPort>0</pcPort>
      <settingsAccess>1</settingsAccess>
      <garp>0</garp>
      <voiceVlanAccess>0</voiceVlanAccess>
      <videoCapability>0</videoCapability>
      <autoSelectLineEnable>0</autoSelectLineEnable>
      <webAccess>0</webAccess>
	  <daysDisplayNotActive>1,2,3,4,5,6,7</daysDisplayNotActive>
      <displayOnTime>00:00</displayOnTime>
      <displayOnDuration>00:00</displayOnDuration>
      <displayIdleTimeout>00:00</displayIdleTimeout>
      <spanToPCPort>0</spanToPCPort>
      <loggingDisplay>1</loggingDisplay>
      <loadServer></loadServer>
   </vendorConfig>
   <versionStamp>>1143565489-a3cbf294-7526-4c29-8791-c4fce4ce4c37</versionStamp>
   <networkLocale>US</networkLocale>
   <networkLocaleInfo>
      <name>US</name>
      <version>8.5(3)</version>
   </networkLocaleInfo>
   <deviceSecurityMode>1</deviceSecurityMode>
   <authenticationURL></authenticationURL>
   <directoryURL></directoryURL>
   <idleURL></idleURL>
   <informationURL></informationURL>
   <messagesURL></messagesURL>
   <proxyServerURL>proxy:3128</proxyServerURL>
   <servicesURL></servicesURL>
   <dscpForSCCPPhoneConfig>96</dscpForSCCPPhoneConfig>
   <dscpForSCCPPhoneServices>0</dscpForSCCPPhoneServices>
   <dscpForCm2Dvce>96</dscpForCm2Dvce>
   <transportLayerProtocol>4</transportLayerProtocol>
   <capfAuthMode>0</capfAuthMode>
   <capfList>
      <capf>
         <phonePort>3804</phonePort>
      </capf>
   </capfList>
   <certHash></certHash>
   <encrConfig>false</encrConfig>
</device>

chaos2000 · 12 Aug 2010

doch, das macht schon einen Unterschied, da einige anbieter nach domain filtern

[Gelöst] Cisco 7942 SIP + Sipgate

dark_scorp

Neuer User

chaos2000

Aktives Mitglied

dark_scorp

Neuer User

dark_scorp

Neuer User

chaos2000

Aktives Mitglied

Neueste Beiträge

Kategorien

Wissenswertes

Statistik des Forums

3CX jetzt einen Monat kostenlos testen

Unternehmen

Lösungen

Nützliche Links

Mehr erfahren