Install labor firmware on international 7170

[michaelnl]

Hi,

I would like to install the current labor firmware on my international Fritz!Box 7170 because i would like to use it as an ISDN-SIP gateway (connect the FB to the ISDN landline and register a few SIP phones).
I don't care about the DSL-modem functions or any other functions.

When i try to install the labor firmware i get the message that it's not compatible with my device.
Is it possible to convert my FB to a German version or is it possible to modify the labor firmware (with Freetz) so i can install it on my international 7170?

Thanks in advance!

 

[massinge]

Hi! it's possible!
please follow this simple steps (i'm sorry but my english is very bad.. i'm italian)
1) enter to telent and digit:

echo "annex B" > /proc/sys/urlader/environment
echo "firmware_info 29.04.30" > /proc/sys/urlader/environment

Without restart, via web interface upgrade your fritz with england 29.04.xx annex B firmware.

2) from ftp connection change the variables:

quote SETENV firmware_version avm
quote SETENV firmware_info 29.04.60

Without restart please start recovery 29.04.67 DE annex B.
3) install last one labor version.
Bye,
Max