Moin, hab mein 40er HFA V3 mit der Firmware OS40_SIP_V3_R5_17_0 bestückt und soweit "eingerichtet" jedoch bekomme es nicht hin das es läuft
hab auch das mit dem 8 Buchstaben etz. eingegeben... jedoch lüppt einfach nicht.....
Diagnose Übersicht
einer ne Idee ?
hab auch das mit dem 8 Buchstaben etz. eingegeben... jedoch lüppt einfach nicht.....
Diagnose Übersicht
| 2021-02-17 17:45:31 | |
| 00 Terminal number | 10000620 |
| 01 SIP server | 192.168.178.1 |
| 02 SIP port | 5060 |
| 03 SIP registrar | 192.168.178.1 |
| 04 SIP registrar port | 5060 |
| 05 SIP gateway | None |
| 06 SIP gateway port | 5060 |
| 07 SIP transport | UDP |
| 08 TLS renegotiation | Secure (RFC5746) |
| 09 SIP local | 5060 |
| 10 Server features | No |
| 11 DNS results | none |
| 12 Multiline | No |
| 13 Keyset lines | None |
| 14 Backup active | Yes |
| 15 Backup proxy | None |
| 16 Use secure calls | No |
| 17 SDES status | Disabled |
| 18 SIP server cert. check | No certificate check |
| 19 Software version | V3R5.17.0 SIP 190920 |
| 20 Display message | Telefonie ausgefallen (RF2) |
| 21 Last restart | 2021-02-17T17:34:57 |
| 22 Memory free | 30740K free |
| 23 Protocol mode | IPv4_IPv6 |
| 24 IP4 address | 192.168.178.84 |
| 25 IP4 subnet mask | 255.255.255.0 |
| 26 IP4 default route | 192.168.178.1 |
| 27 Primary DNS | 192.168.178.1 |
| 28 Secondary DNS | None |
| 29 IP4 route 1 IP | None |
| 30 IP4 route 1 gateway | None |
| 31 IP4 route 1 mask | None |
| 32 IP4 route 2 IP | None |
| 33 IP4 route 2 gateway | None |
| 34 IP4 route 2 mask | None |
| 35 IP6 address | None |
| 36 IP6 prefix length | None |
| 37 IP6 global gateway | None |
| 38 IP6 link local addr | None |
| 39 IP6 route 1 dest | None |
| 40 IP6 route 1 pref len | None |
| 41 IP6 route 1 gateway | None |
| 42 IP6 route 2 dest | None |
| 43 IP6 route 2 pref len | None |
| 44 IP6 route 2 gateway | None |
| 45 MAC address | 001ae872b60f |
| 46 LLDP | Yes |
| 47 VLAN discovery | LLDP-MED |
| 48 DHCPv4 | Yes |
| 49 DHCPv4 re-use | No |
| 50 DHCPv6 | Yes |
| 51 DHCPv6 re-use | No |
| 52 LAN port type | Automatic |
| 53 PC port status | Disabled |
| 54 PC port type | Automatic |
| 55 PC port autoMDIX | No |
| 56 VLAN ID | None |
| 57 QoS Layer 2 | Yes |
| 58 QoS Layer 2 voice | 5 |
| 59 QoS Layer 2 signalling | 3 |
| 60 QoS Layer 2 default | 0 |
| 61 QoS Layer 3 | Yes |
| 62 QoS Layer 3 voice | EF / 46 |
| 63 QoS Layer 3 signalling | AF31 / 26 |
| 64 LLDP-MED operation | Sent: Wed Feb 17 17:45:30 2021 Chassis ID TLV Data .Subtype = Network address .IANA_TYPE = IPv4 Address .ID = 192.168.178.84 Port ID TLV Data .Subtype = MAC address .ID = 00:1A:E8:72:B6:0F TTL TLV data .seconds = 120 System Caps TLV Data .Supported = Bridge, Telephone, .Enabled = Telephone, MAC_Phy config TLV data .Auto-set supported = Yes .Auto-set enabled = Yes .PMD = 0x6c00 .PMD1 = 10BASE-T half duplex mode .PMD2 = 10BASE-T full duplex mode .PMD3 = 100BASE-TX half duplex mode .PMD4 = 100BASE-TX full duplex mode .MAU = 100BaseTXFD : 0x10 LLDP-MED Caps TLV Data .Caps - LLDP-MED = Yes .Caps - Network Policy = Yes .Caps - Location ID = No .Caps - Extended Power Mdi PD = Yes .Caps - Extended Power Mdi Pse = No .Caps - Inventory = No .Type = Endpoint Class III Network policy (Voice) TLV data .Policy unknown = Yes .Tagged = No .VLAN ID = 0 .Layer 2 priority = 0 .DSCP = 0 Network policy (Voice Signalling) TLV data .Policy unknown = Yes .Tagged = No .VLAN ID = 0 .Layer 2 priority = 0 .DSCP = 0 Network policy (Video conferencing) TLV data .Policy unknown = Yes .Tagged = No .VLAN ID = 0 .Layer 2 priority = 0 .DSCP = 0 Extended Power TLV data .Type = PD .Source = Unknown .Priority = Critical .Power value = 46 Received: Wed Feb 17 17:45:30 2021 TTL TLV data .seconds = Network policy .TLV not available |
| 65 NG911 location | Disabled |
| 66 FIPS enabled | No |
einer ne Idee ?
Zuletzt bearbeitet:
