[Gelöst] Einstellen der Leitungen am 7960

[nourdin]

Hallo,

Ich nutze die Fritzbox 7390 und das 7960.
Da man an diesem Telefon 6 Leitungen einstellen kann möchte Ich dies auch machen.

Wie müsste die Config geschrieben werden, das Ich alle 6 Leitungen nutzen kann ?

Ich finde immer nur Dateien wo 2 Leitungen beschrieben sind.

Mfg

 

[cyberstein]

poste mal Deine jetztig Konfig.
Das könnte helfen Dir zu Helfen.

 

[nourdin]

# Proxy Server
proxy1_address: "192.168.178.1"
proxy2_address: ""
proxy3_address: ""
proxy4_address: ""
proxy5_address: ""
proxy6_address: ""

# Line 1 Settings
line1_name: "620" ; Line 1 Extension\User ID
line1_displayname: "Buero 1" ; Line 1 Display Name
line1_shortname: "Leitung 1" ; Line 1 Shortname Diplsy Lable
line1_authname: "620" ; Line 1 Registration Authentication
line1_password: "123456" ; Line 1 Registration Password

# Line 2 Settings
line2_name: "621" ; Line 2 Extension\User ID
line2_displayname: "Buero 2" ; Line 2 Display Name
line2_shortname: "Leitung 621"
line2_authname: "621" ; Line 2 Registration Authentication
line2_password: "123456" ; Line 2 Registration Password

# Emergency Proxy info
#proxy_emergency: ""
#proxy_emergency_port: "5060"

# Backup Proxy info
#proxy_backup: ""
#proxy_backup_port: "5060"

# Outbound Proxy info
outbound_proxy: "192.168.178.1"
outbound_proxy_port: "5060"

# Test
# Proxy Registration (0-disable (default), 1-enable)
proxy_register: "1"

# NAT/Firewall Traversal
nat_enable: "1"
#nat_address: "192.168.178.1"
#voip_control_port: "5060"
#start_media_port: "16384"
#end_media_port: "32766"
#nat_received_processing: "1"

# Phone Label (Text desired to be displayed in upper right corner)
phone_label: "" ; Has no effect on SIP messaging

# Time Zone phone will reside in
time_zone: "ett"

# Telnet Level (enable or disable the ability to telnet into this phone
telnet_level: "2" ; 0-Disabled (default), 1-Enabled, 2-Privileged

# Phone prompt/password for telnet/console session
#phone_prompt: "" ; Telnet/Console Prompt
#phone_password: "" ; Telnet/Console Password

# Enable_VAD (1-enabled, 0-disabled)
enable_vad: "1"

# Network Media Type (auto, full100, full10, half100, half10)
network_media_type: "auto"

 

[cyberstein]

bin mir nicht 100% sicher aber ich denke es sollte so gehen:

proxy2_address: "IP FritzBox line 1"
proxy2_address: "IP FritzBox line 2"
proxy3_address: "IP FritzBox line 3"
proxy4_address: "IP FritzBox line 4"
proxy5_address: "IP FritzBox line 5"
proxy6_address: "IP FritzBox line 6"

# Line 1 Settings
line1_name: "620" ; Line 1 Extension\User ID
line1_displayname: "Buero 1" ; Line 1 Display Name
line1_shortname: "Leitung 1" ; Line 1 Shortname Diplsy Lable
line1_authname: "620" ; Line 1 Registration Authentication
line1_password: "123456" ; Line 1 Registration Password

# Line 2 Settings
line1_name: "XXX" ; Line 2 Extension\User ID
line1_displayname: "Buero 2" ; Line 1 Display Name
line1_shortname: "Leitung 2" ; Line 1 Shortname Diplsy Lable
line1_authname: "XXX" ; Line 1 Registration Authentication
line1_password: "123456" ; Line 1 Registration Password


...

 

[nourdin]

Guten Morgen,

Ja mit den Proxy-Einstellungen ging es Sofort.

Vielen Dank