kurzer (?) / kein Ton an analogen Endgeräten (DIVA BRI V2)

[nielsd]

Hallo,


ich ärger mich nun schon einige Zeit mit folgendem Problem herum:

Habe ein Asterisk mit Diva UM-4BRI-8 PCI v2 und einigen SIP-Telefonen - Port 4 der Diva ist im NT mode - daran hängt ein Analog-Adapter (DeTeWe 33clip) mit Analogtelefon(en) und/oder Fax.

Ich kann das Analogtelefon anwählen und es klingelt. Beim Abheben gibt es nur für Zehntelsekunden Ton, dann Stille (auf beiden Seiten). Ich kann wie gewohnt auflegen usw. (ordentlicher Verbindungsabbau).

Rufe ich von dem analogen Telefon die VoiceMail an, höre ich auch nur einen Teil von "Bit...", dann ist Stille - DTMF funktioniert offenbar auch problemlos.

In den Logs finden sich keine Fehler o.ä. (siehe unten).

Codecs sollten durchweg alaw sein.

Hat hier jemand einen Tip, nach was ich suchen kann? Würde mich wirklich sehr freuen...

capi.conf

[general]
nationalprefix=0
internationalprefix=00
language=de
rxgain=0.8
txgain=0.8
alaw=yes

... hier die ersten Ports im TE mode ...

[analog1]
isdnmode=did
ntmodus=yes
incomingmsn=* 
controller=4
softdtmf=0
accountcode=
context=from-internal
group=4
callgroup=4
echocancel=yes
echocancelold=no
devices=2

divactrl mlog -c4 -o

[C:4] 0:0765:344 - D-R(023) 00 E5 14 0A 08 01 7C 05 04 03 90 90 A3 1E 02 80 83 6C 04 01 80 35 39                                                                 
[C:4] 0:0765:344 - D-X(004) 00 E5 01 16                                                                                                                          
[C:4] 0:0765:346 - SIG-R(019) 08 01 7C 05 04 03 90 90 A3 1E 02 80 83 6C 04 01 80 35 39                                                                           
                     Q.931  CR7c SETUP                                                                                                                           
                            Bearer Capability 90 90 a3                                                                                                           
                            Progress Indicator 80 83                                                                                                             
                            Calling Party Number 01 80 '59'                                                                                                      
[C:4] 0:0765:346 - SIG-S 0->6 e:805                                                                                                                              
[C:4] 0:0765:349 - CREATEID ok: context:1f assigned Id:4 freeIds=e8                                                                                              
[C:4] 0:0765:349 - alloc cr in use =6                                                                                                                            
[C:4] 0:0765:352 - free cr in use =5                                                                                                                             
[C:4] 0:0765:353 - DELETEID ok: deleted Id:6 freeIds=e8                                                                                                          
[C:4] 0:0765:354 - CREATEID ok: context:1f assigned Id:6 freeIds=e8                                                                                              
[C:4] 0:0765:354 - alloc cr in use =6                                                                                                                            
[C:4] 0:0765:841 - SIG-EVENT FF00                                                                                                                                
[C:4] 0:0765:841 - SIG-x(007) 08 01 FC 0D 18 01 89                                                                                                               
                     Q.931  CRfc SETUP_ACK                                                                                                                       
                            Channel Id 89                                                                                                                        
[C:4] 0:0765:841 - CREATEID ok: context:1f assigned Id:a freeIds=e7                                                                                              
[C:4] 0:0765:841 - [1,0] dsp_assign 001f, 0, 0                                                                                                                   
[C:4] 0:0765:841 - [1,0] Download 520 requested                                                                                                                  
[C:4] 0:0765:842 - [1,1] Switching DSP on 1 0 0:0 0:0                                                                                                            
[C:4] 0:0765:844 - [1,1] SIGTX FTY[00] 08 03 01 00                                                                                                               
[C:4] 0:0765:844 - [1,1] SIGTX FTY[00] 08 00 02 01                                                                                                               
[C:4] 0:0765:844 - SIG-S 6->25 e:ff00                                                                                                                            
[C:4] 0:0765:846 - D-X(011) 02 E5 0A 16 08 01 FC 0D 18 01 89                                                                                                     
[C:4] 0:0765:848 - [1,1] Starting task 520 00000001                                                                                                              
[C:4] 0:0765:861 - D-R(004) 02 E5 01 0C                                                                                                                          
[C:4] 0:0771:103 - D-R(012) 00 E5 16 0C 08 01 7C 7B 70 02 80 2A                                                                                                  
[C:4] 0:0771:104 - D-X(004) 00 E5 01 18                                                                                                                          
[C:4] 0:0771:105 - SIG-R(008) 08 01 7C 7B 70 02 80 2A                                                                                                            
                     Q.931  CR7c INFO                                                                                                                            
                            Called Party Number 80 '*'                                                                                                           
[C:4] 0:0771:105 - [1,1] Switching DSP off 1                                                                                                                     
[C:4] 0:0771:105 - [1,1] KERNEL[DM2e90] e79e 1a3d db05 09ab c824 c94a 88d5 8acf                                                                                  
[C:4] 0:0771:106 - [1,1] KERNEL[DM2e98] 0bdd 9c61 5bba 8148 50df 2b9c 8845 a2f9                                                                                  
[C:4] 0:0771:106 - [1,1] DSP TX idle/aborted: 0/0, RX overflow: 0+0                                                                                              
[C:4] 0:0771:106 - [1,1] DSP Sample overruns: 0, Reboots: 0, SIG: 0/0/0                                                                                          
[C:4] 0:0771:106 - [1,1] DSP RX aborted/CRC: 0/0                                                                                                                 
[C:4] 0:0771:106 - [1,1] DSP Bulk underrun/overlength N/N, Simplif 0+0                                                                                           
[C:4] 0:0771:106 - [1,1] DSP Total: 5, idle/aborted: 0/0, overflow: 0+0                                                                                          
[C:4] 0:0771:106 - [1,1] DSP Total sample overruns: 0, Reboots: 0, SIG: 0/0                                                                                      
[C:4] 0:0771:106 - [1,1] DSP Total frames TX: 3, RX: 0, RX aborted/CRC: 0/0                                                                                      
[C:4] 0:0771:106 - [1,1] DSP Total Bulk underrun/overlength 0/0, Simplif 0+0                                                                                     
[C:4] 0:0771:106 - [1,1] TX NULL 0, SW sequence 0                                                                                                                
[C:4] 0:0771:107 - [1,1] Task stopped                                                                                                                            
[C:4] 0:0771:107 - [1,0] dsp_release                                                                                                                             
[C:4] 0:0771:107 - DELETEID ok: deleted Id:a freeIds=e7                                                                                                          
[C:4] 0:0771:690 - D-R(012) 00 E5 18 0C 08 01 7C 7B 70 02 80 39                                                                                                  
[C:4] 0:0771:691 - D-X(004) 00 E5 01 1A                                                                                                                          
[C:4] 0:0771:692 - SIG-R(008) 08 01 7C 7B 70 02 80 39                                                                                                            
                     Q.931  CR7c INFO                                                                                                                            
                            Called Party Number 80 '9'                                                                                                           
[C:4] 0:0772:057 - D-R(012) 00 E5 1A 0C 08 01 7C 7B 70 02 80 38                                                                                                  
[C:4] 0:0772:058 - D-X(004) 00 E5 01 1C                                                                                                                          
[C:4] 0:0772:059 - SIG-R(008) 08 01 7C 7B 70 02 80 38                                                                                                            
                     Q.931  CR7c INFO                                                                                                                            
                            Called Party Number 80 '8'                                                                                                           
[C:4] 0:0772:067 - [14] N-ASSIGN REQ Id:NL_ID, Ch:00                                                                                                             
[C:4] 0:0772:067 - CREATEID ok: context:3f assigned Id:a freeIds=e7                                                                                              
[C:4] 0:0772:067 - B2Assign  01 01 01 01 01 01 01 01 -- -- -- -- -- -- -- --                                                                                     
[C:4] 0:0772:067 - B2Assign 8 Sig=03 d_id=01                                                                                                                     
[C:4] 0:0772:067 - Assign L2:3 L3:4 free:2392/2400 l:160 d:25480 fc:16000/15500                                                                                  
[C:4] 0:0772:067 - Layer 2 Transparent                                                                                                                           
[C:4] 0:0772:068 - [15] N-RC=ASSIGN_OK Id:0a, Ch:00                                                                                                              
[C:4] 0:0772:069 - [1,0] dsp_assign 0016, 1, 160                                                                                                                 
[C:4] 0:0772:069 - [1,0] CAI[00] 16 00 00 00 a0 00                                                                                                               
[C:4] 0:0772:069 - [1,0] Download 532 requested                                                                                                                  
[C:4] 0:0772:070 - SIG-X(011) 08 01 FC 07 4C 05 01 80 2A 39 38                                                                                                   
                     Q.931  CRfc CONN                                                                                                                            
                            Connected Number 01 80 2a 39 38                                                                                                      
[C:4] 0:0772:070 - [1,1] Switching DSP on 1 0 0:0 0:0                                                                                                            
[C:4] 0:0772:072 - SIG-S 25->10 e:887                                                                                                                            
[C:4] 0:0772:074 - [16] N-CONNECT IND Id:0a, Ch:03                                                                                                               
[C:4] 0:0772:075 - D-X(015) 02 E5 0C 1C 08 01 FC 07 4C 05 01 80 2A 39 38                                                                                         
[C:4] 0:0772:077 - [17] N-CONNECT ACK REQ Id:0a, Ch:03                                                                                                           
[C:4] 0:0772:077 - [18] N-RC=OK Id:0a, Ch:03                                                                                                                     
[C:4] 0:0772:078 - [1,1] Switching DSP off 1                                                                                                                     
[C:4] 0:0772:078 - [1,1] KERNEL[DM2e90] e79e 1a3d db05 09ab c824 c94a 88d5 8acf                                                                                  
[C:4] 0:0772:078 - [1,1] KERNEL[DM2e98] 0bdd 9c61 5bba 8148 50df 2b9c 8845 a2f9                                                                                  
[C:4] 0:0772:078 - [1,1] DSP TX idle/aborted: 0/0, RX overflow: 0+0                                                                                              
[C:4] 0:0772:078 - [1,1] DSP Sample overruns: 0, Reboots: 0, SIG: 0/0/0                                                                                          
[C:4] 0:0772:079 - [1,1] DSP RX aborted/CRC: 0/0                                                                                                                 
[C:4] 0:0772:079 - [1,1] DSP Bulk underrun/overlength N/N, Simplif 0+0                                                                                           
[C:4] 0:0772:079 - [1,1] DSP Total: 6, idle/aborted: 0/0, overflow: 0+0                                                                                          
[C:4] 0:0772:079 - [1,1] DSP Total sample overruns: 0, Reboots: 0, SIG: 0/0                                                                                      
[C:4] 0:0772:079 - [1,1] DSP Total frames TX: 3, RX: 0, RX aborted/CRC: 0/0                                                                                      
[C:4] 0:0772:079 - [1,1] DSP Total Bulk underrun/overlength 0/0, Simplif 0+0                                                                                     
[C:4] 0:0772:079 - [1,1] TX NULL 0, SW sequence 0                                                                                                                
[C:4] 0:0772:079 - [1,1] Task stopped                                                                                                                            
[C:4] 0:0772:080 - [1,0] dsp_release                                                                                                                             
[C:4] 0:0772:080 - [1,0] dsp_assign 00d0, 1, 160                                                                                                                 
[C:4] 0:0772:080 - [1,0] CAI[00] 1c 00 00 00 a0 00                                                                                                               
[C:4] 0:0772:080 - [1,0] Download 552 requested                                                                                                                  
[C:4] 0:0772:080 - [1,1] Switching DSP on 1 0 0:0 0:0                                                                                                            
[C:4] 0:0772:083 - [1,1] LEC FTY[00] 05 07 00 00 00 00 00 00 00                                                                                                  
[C:4] 0:0772:086 - [1,1] LEC FTY[00] 05 07 00 00 00 00 00 00 00                                                                                                  
[C:4] 0:0772:087 - [19] N-UDATA REQ Id:0a, Ch:03                                                                                                                 
[C:4] 0:0772:087 - [1a] N-RC=OK Id:0a, Ch:03                                                                                                                     
[C:4] 0:0772:091 - D-R(004) 02 E5 01 0E                                                                                                                          
[C:4] 0:0772:094 - [1,1] Starting task 552 00000001                                                                                                              
[C:4] 0:0772:095 - DSP LEC Parameters written 5691 0007 32                                                                                                       
[C:4] 0:0772:096 - [1,1] DSP startup                                                                                                                             
[C:4] 0:0772:097 - D-R(008) 00 E5 1C 0E 08 01 7C 0F                                                                                                              
[C:4] 0:0772:097 - [1,1] DTMF enable receiver 80 80 768 0001 7f 1f                                                                                               
[C:4] 0:0772:098 - [1,1] DTMF CFG 103 4 4 0000 0000 0005 0010 7f 1f                                                                                              
[C:4] 0:0772:098 - D-X(004) 00 E5 01 1E                                                                                                                          
[C:4] 0:0772:099 - SIG-R(004) 08 01 7C 0F                                                                                                                        
                     Q.931  CR7c CONN_ACK                                                                                                                        
[C:4] 0:0773:575 - [1b] N-DATA REQ Id:0a, Ch:03                                                                                                                  
[C:4] 0:0773:575 - [1c] N-RC=OK Id:0a, Ch:03                                                                                                                     
[C:4] 0:0773:576 - B1-X(160) AA AA AA 2B AB AB 2B AB AB AB AB AB EB 2B 2B 2B 2B 2B 2B 2B 2B AB AB AB 2B AB 2B 6B EB EB cont                                      
[C:4] 0:0773:595 - [1d] N-DATA REQ Id:0a, Ch:03                                                                                                                  
[C:4] 0:0773:595 - [1e] N-RC=OK Id:0a, Ch:03                                                                                                                     
[C:4] 0:0773:596 - B1-X(160) 4A CA 12 F2 D2 0A 4A AA 26 7E E6 B6 B6 B6 D8 D8 58 B8 08 E8 58 98 78 78 B8 C8 9A A7 77 09 cont                                      
[C:4] 0:0773:614 - [1f] N-DATA REQ Id:0a, Ch:03                                                                                                                  
[C:4] 0:0773:614 - [20] N-RC=OK Id:0a, Ch:03                                                                                                                     
[C:4] 0:0773:615 - B1-X(160) 29 03 1A 2A 68 60 40 E0 58 60 A7 01 41 7D 65 85 E5 25 DD ED 09 5E AC DC 24 64 64 24 7C 6C cont                                      
                                                                                                                                                                 
unknown command <>

asterisk log

pbx1*CLI> core set debug 5                                                                                                                                       
Core debug was 0 and is now 5                                                                                                                                    
pbx1*CLI> capi debug                                                                                                                                             
CAPI Message Debugging Enabled                                                                                                                                   
    -- CONNECT_IND (PLCI=0x104,DID=,CID=59,CIP=0x4,CONTROLLER=0x4)                                                                                               
  == analog1#02: Interface cleanup PLCI=0x104                                                                                                                    
    -- CONNECT_IND (PLCI=0x204,DID=,CID=59,CIP=0x4,CONTROLLER=0x4)                                                                                               
  == Started pbx on channel CAPI/analog1#02/*98-4                                                                                                                
    -- Executing [*98@from-internal:1] Answer("CAPI/analog1#02/*98-4", "") in new stack                                                                          
       > analog1#02: DTMF conf(PLCI=0x204)                                                                                                                       
    -- Executing [*98@from-internal:2] Wait("CAPI/analog1#02/*98-4", "1") in new stack                                                                           
    -- Executing [*98@from-internal:3] NoOp("CAPI/analog1#02/*98-4", "app-dialvm: Asking for mailbox") in new stack                                              
    -- Executing [*98@from-internal:4] Read("CAPI/analog1#02/*98-4", "MAILBOX,vm-login,,,3,2") in new stack                                                      
    -- <CAPI/analog1#02/*98-4> Playing 'vm-login.gsm' (language 'de')                                                                                            
    -- User entered nothing, 2 chances left                                                                                                                      
    -- <CAPI/analog1#02/*98-4> Playing 'vm-login.gsm' (language 'de')                                                                                            
    -- User entered nothing, 1 chance left                                                                                                                       
    -- <CAPI/analog1#02/*98-4> Playing 'vm-login.gsm' (language 'de')                                                                                            
    -- User entered nothing.

Vielen Dank vorab für jeden Tip!
Beste Grüße,


Niels.

 

[nielsd]

nichts / nothing?

hmmm,

habe hier einen channel state für einen solchen "stillen" Call:

 -- General --                                                                                                                                                                                                     
           Name: CAPI/analog1#02/59-b                                                                                                                                                                              
           Type: CAPI                                                                                                                                                                                              
       UniqueID: pbx.xyz.de-1287240138.8                                                                                                                                                         
      Caller ID: 59                                                                                                                                                                                                
 Caller ID Name: (N/A)                                                                                                                                                                                             
    DNID Digits: 59                                                                                                                                                                                                
       Language: de                                                                                                                                                                                                
          State: Up (6)                                                                                                                                                                                            
          Rings: 0                                                                                                                                                                                                 
  NativeFormats: 0x8 (alaw)                                                                                                                                                                                        
    WriteFormat: 0x8 (alaw)                                                                                                                                                                                        
     ReadFormat: 0x4 (ulaw)                                                                                                                                                                                        
 WriteTranscode: No                                                                                                                                                                                                
  ReadTranscode: Yes                                                                                                                                                                                               
1st File Descriptor: 39                                                                                                                                                                                            
      Frames in: 3                                                                                                                                                                                                 
     Frames out: 5215                                                                                                                                                                                              
 Time to Hangup: 0                                                                                                                                                                                                 
   Elapsed Time: 0h1m56s                                                                                                                                                                                           
  Direct Bridge: SIP/99-00000002                                                                                                                                                                                   
Indirect Bridge: SIP/99-00000002                                                                                                                                                                                   
 --   PBX   --                                                                                                                                                                                                     
        Context: from-internal                                                                                                                                                                                     
      Extension:                                                                                                                                                                                                   
       Priority: 1                                                                                                                                                                                                 
     Call Group: 16                                                                                                                                                                                                
   Pickup Group: 0                                                                                                                                                                                                 
    Application: AppDial                                                                                                                                                                                           
           Data: (Outgoing Line)                                                                                                                                                                                   
    Blocking in: ast_waitfor_nandfds                                                                                                                                                                               
      Variables:                                                                                                                                                                                                   
BRIDGEPVTCALLID=04w3S56eoIf6-g59cnkPinF7Jz4tyN                                                                                                                                                                     
BRIDGEPEER=SIP/99-00000002                                                                                                                                                                                         
DIALEDPEERNUMBER=analog1/59                                                                                                                                                                                        
KEEPCID=TRUE                                                                                                                                                                                                       
TTL=64

Ist hier vielleicht "ReadFormat: 0x4 (ulaw) das Problem?

freue mich über jede Hilfe / Any help would be really appreciated.

Vielen Dank vorab an alle,


Niels.

 

[nielsd]

channel.c: Didn't receive a media frame from CAPI/analog1#02/*97-3 within 500 ms of a

...nun finde ich doch was im debugging:

[Oct 16 17:36:59] DEBUG[7081] channel.c: ====:::: Locking AST channel CAPI/analog1#02/*97-3                                                                                                                        
[Oct 16 17:36:59] DEBUG[7081] channel.c: :::=== Now have 1 locks (recursive)                                                                                                                                       
[Oct 16 17:36:59] DEBUG[7081] channel.c: ::::==== Channel CAPI/analog1#02/*97-3 was locked                                                                                                                         
[Oct 16 17:36:59] DEBUG[7081] channel.c: ::::==== Unlocking AST channel CAPI/analog1#02/*97-3                                                                                                                      
[Oct 16 17:36:59] DEBUG[7081] channel.c: ::::==== Channel CAPI/analog1#02/*97-3 was unlocked                                                                                                                       
[Oct 16 17:36:59] DEBUG[6785] devicestate.c: No provider found, checking channel drivers for CAPI - analog1#02/*97                                                                                                 
[Oct 16 17:36:59] DEBUG[6785] devicestate.c: Changing state for CAPI/analog1#02/*97 - state 2 (In use)                                                                                                             
[Oct 16 17:36:59] DEBUG[6817] app_queue.c: Device 'CAPI/analog1#02/*97' changed to state '6' (Ringing) but we don't care because they're not a member of any queue.                                                
[Oct 16 17:36:59] DEBUG[6817] app_queue.c: Device 'CAPI/analog1#02/*97' changed to state '2' (In use) but we don't care because they're not a member of any queue.                                                 
[Oct 16 17:36:59] DEBUG[7081] channel.c: Didn't receive a media frame from CAPI/analog1#02/*97-3 within 500 ms of answering. Continuing anyway                                                                     
[Oct 16 17:36:59] DEBUG[7081] channel.c: ====:::: Locking AST channel CAPI/analog1#02/*97-3                                                                                                                        
[Oct 16 17:36:59] DEBUG[7081] channel.c: :::=== Now have 1 locks (recursive)                                                                                                                                       
[Oct 16 17:36:59] DEBUG[7081] channel.c: ::::==== Channel CAPI/analog1#02/*97-3 was locked                                                                                                                         
[Oct 16 17:36:59] DEBUG[7081] channel.c: ::::==== Unlocking AST channel CAPI/analog1#02/*97-3                                                                                                                      
[Oct 16 17:36:59] DEBUG[7081] channel.c: ::::==== Channel CAPI/analog1#02/*97-3 was unlocked                                                                                                                       
[Oct 16 17:36:59] DEBUG[7081] pbx.c: Launching 'Wait'                                                                                                                                                              
[Oct 16 17:36:59] VERBOSE[7081] logger.c:     -- Executing [*97@from-internal:2] Wait("CAPI/analog1#02/*97-3", "1") in new stack                                                                                   
[Oct 16 17:36:59] DEBUG[7081] channel.c: ====:::: Locking AST channel CAPI/analog1#02/*97-3                                                                                                                        
[Oct 16 17:36:59] DEBUG[7081] channel.c: :::=== Now have 1 locks (recursive)

 

[nielsd]

und nun auch:

DATA_B3_REQ                ID=002 #0x0024 LEN=0022                                                                                                                                                                 
  Controller/PLCI/NCCI            = 0xe0104                                                                                                                                                                        
  Data32                          = 0x8df594c                                                                                                                                                                      
  DataLength                      = 0xa0                                                                                                                                                                           
  DataHandle                      = 0xdd                                                                                                                                                                           
  Flags                           = 0x0                                                                                                                                                                            
  Data64                          = 0x8d2c0815cffdb6c5                                                                                                                                                             
                                                                                                                                                                                                                   
CAPI: ApplId=0x0002 Command=0x86 SubCommand=0x81 MsgNum=0x0024 NCCI=0x000e0104                                                                                                                                     
DATA_B3_CONF               ID=002 #0x0024 LEN=0016                                                                                                                                                                 
  Controller/PLCI/NCCI            = 0xe0104                                                                                                                                                                        
  DataHandle                      = 0xdd                                                                                                                                                                           
  Info                            = 0x0                                                                                                                                                                            
                                                                                                                                                                                                                   
       > analog1#02: too much voice to send for NCCI=0xe0104                                                                                                                                                       
       > analog1#02: too much voice to send for NCCI=0xe0104                                                                                                                                                       
       > analog1#02: too much voice to send for NCCI=0xe0104                                                                                                                                                       
       > analog1#02: too much voice to send for NCCI=0xe0104                                                                                                                                                       
       > analog1#02: too much voice to send for NCCI=0xe0104                                                                                                                                                       
       > analog1#02: too much voice to send for NCCI=0xe0104                                                                                                                                                       
       > analog1#02: too much voice to send for NCCI=0xe0104                                                                                                                                                       
       > analog1#02: too much voice to send for NCCI=0xe0104                                                                                                                                                       
       > analog1#02: too much voice to send for NCCI=0xe0104                                                                                                                                                       
       > analog1#02: too much voice to send for NCCI=0xe0104                                                                                                                                                       
       > analog1#02: too much voice to send for NCCI=0xe0104                                                                                                                                                       
       > analog1#02: too much voice to send for NCCI=0xe0104                                                                                                                                                       
       > analog1#02: too much voice to send for NCCI=0xe0104

 

[armincm]

Kannst du mal einen kompletten Asterisk log mit verbose 5 und capi debug von einem solchen call erzeugen?
Das "too much voice to send" ist definitiv das Problem, aber die Ursache ist da nicht zu erkennen.

Armin

 

[armincm]

Wenn es mit den Voice-Paketen Probleme gibt, wäre sogar ein volles Log mit verbose 9 und cpai debug notwendig.

Armin

 

[nielsd]

ISDN4#02: CAPI INFO 0x3303: Protocol error layer 3

Hallo Armin,


vielen Dankl für Deine Meldung (dachte schon bin allein hier...). Wie ich lese, bist Du ebenfalls Freund / Verfechter von Eicon Karten (allerdings hatte ich wohl einige Jahre weitaus weniger mit ihnen zu tun) und ich staune selbst über das nette Stück Elektronik...

In der Zwischenzeit bin ich von den Melware Treibern auf die offiziellen, aktuellen Dialogic Treiber (9.5-110-91) umgestiegen (auf Trixbox), die ich aus den Quellen installiert habe (mit -mrproper).

Mit diesen kann ich von SIP-Telefonen->*->detewe 33clip->analog Telefon anrufen und der Sound scheint auch OK. Dagegen funktioniert der Ruf VOM Analogtelefon an * oder eine SIP Nebenstelle nicht:

ISDN4#02: CAPI INFO 0x3303: Protocol error layer 3

CAPI: ApplId=0x0002 Command=0x02 SubCommand=0x82 MsgNum=0x0010 NCCI=0x00000a04
CONNECT_IND                ID=002 #0x0010 LEN=0034
  Controller/PLCI/NCCI            = 0xa04
  CIPValue                        = 0x4
  CalledPartyNumber               = default
  CallingPartyNumber              = <01 80>59
  CalledPartySubaddress           = default
  CallingPartySubaddress          = default
  BC                              = <90 90 a3>
  LLC                             = default
  HLC                             = default
  AdditionalInfo                 
   BChannelinformation            = default
   Keypadfacility                 = default
   Useruserdata                   = default
   Facilitydataarray              = default
   SendingComplete                = default

    -- CONNECT_IND (PLCI=0xa04,DID=,CID=59,CIP=0x4,CONTROLLER=0x4)
  == ISDN4#02: setting format ulaw - 0x80e (gsm|ulaw|alaw|g726)VOCODER
  == ISDN4#02: Incoming call '59' -> ''
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x0011 NCCI=0x00000a04
INFO_IND                   ID=002 #0x0011 LEN=0021
  Controller/PLCI/NCCI            = 0xa04
  InfoNumber                      = 0x28
  InfoElement                     = LINK<3d>0

INFO_RESP                  ID=002 #0x0011 LEN=0012
  Controller/PLCI/NCCI            = 0xa04

    -- ISDN4#02: info element DSP
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x0012 NCCI=0x00000a04
INFO_IND                   ID=002 #0x0012 LEN=0016
  Controller/PLCI/NCCI            = 0xa04
  InfoNumber                      = 0x18
  InfoElement                     = <81>

INFO_RESP                  ID=002 #0x0012 LEN=0012
  Controller/PLCI/NCCI            = 0xa04

    -- ISDN4#02: info element CHANNEL IDENTIFICATION 81
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x0013 NCCI=0x00000a04
INFO_IND                   ID=002 #0x0013 LEN=0015
  Controller/PLCI/NCCI            = 0xa04
  InfoNumber                      = 0x8005
  InfoElement                     = default

INFO_RESP                  ID=002 #0x0013 LEN=0012
  Controller/PLCI/NCCI            = 0xa04

    -- ISDN4#02: info element SETUP
  == Parsing '/etc/asterisk/sip_notify.conf':   == Found
  == Manager 'admin' logged on from 127.0.0.1
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x0014 NCCI=0x00000a04
INFO_IND                   ID=002 #0x0014 LEN=0017
  Controller/PLCI/NCCI            = 0xa04
  InfoNumber                      = 0x70
  InfoElement                     = <80>7

INFO_RESP                  ID=002 #0x0014 LEN=0012
  Controller/PLCI/NCCI            = 0xa04

    -- ISDN4#02: info element CALLED PARTY NUMBER
    -- ISDN4#02: Updated channel name: CAPI/ISDN4#02/7-5
CONNECT_RESP               ID=002 #0x0014 LEN=0019
  Controller/PLCI/NCCI            = 0xa04
  Reject                          = 0x1
  BProtocol                       = default
  ConnectedNumber                 = default
  ConnectedSubaddress             = default
  LLC                             = default
  AdditionalInfo                  = default

CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x0015 NCCI=0x00000a04
INFO_IND                   ID=002 #0x0015 LEN=0015
  Controller/PLCI/NCCI            = 0xa04
  InfoNumber                      = 0x807b
  InfoElement                     = default

INFO_RESP                  ID=002 #0x0015 LEN=0012
  Controller/PLCI/NCCI            = 0xa04

    -- ISDN4#02: info element INFORMATION
CAPI: ApplId=0x0002 Command=0x04 SubCommand=0x82 MsgNum=0x0017 NCCI=0x00000a04
DISCONNECT_IND             ID=002 #0x0017 LEN=0014
  Controller/PLCI/NCCI            = 0xa04
  Reason                          = 0x3303

DISCONNECT_RESP            ID=002 #0x0017 LEN=0012
  Controller/PLCI/NCCI            = 0xa04

       > ISDN4#02: CAPI INFO 0x3303: Protocol error layer 3
    -- ISDN4#02: DISCONNECT_IND on incoming without pbx, doing hangup.
       > CAPI/ISDN4#02/7-5: set channel task to 1
  == ISDN4#02: CAPI Hangingup for PLCI=0xa04 in state 4
  == ISDN4#02: Interface cleanup PLCI=0xa04
       > chan_capi devicestate requested for ISDN4#02/7 is 'Not in use'
  == Using SIP RTP TOS bits 184
  == Using SIP RTP CoS mark 5
  == Using SIP VRTP TOS bits 136
  == Using SIP VRTP CoS mark 6

Ein zweites Problem scheint, das ich die Ports der Karte nicht mit gemischten Protokollen und/oder 1TR6 betreiben kann.

Versuche ich einen Port in 1TR6 umzustellen, lässt sich die Karte nicht mehr laden und geht in der "Trapped mode". Unter melware gab es das Problem scheinbar nicht...

Es schaut so aus als ob es Probleme beim Laden / initiieren der Firmware bzw. des betr. Protokollstacks in die Karte gäbe - hier z.B. ein Log beim Treiberstart:

[pbx1 divas]# ./Start
Load Diva DIDD driver ... OK
Load Diva XDI  driver ... OK
Check for saved MAINT debug/trace buffer ... idle
Write Diva configuration to CFGLib ... succeeded
Update CHAN_CAPI configuration ... OK, not changed
Logical Adapter Nr: 1, adapters:4, adapter:0
Start adapter Nr:1 - 'Dialogic Diva UM-4BRI-8 PCI v2', SN: 13796 ...

vidi mode: 1
vidi state: 'on'
FPGA[] file ds4bri2.bit (2007/10/15    18:14:31 18:14:31) len 233649
Loading TE_DMLT, Build 108-971, Protocol 6.03(V14) 104-8 [F#00FF]
3: DSP code base 0x80debfd0, max size 0x00204030 (80debfd0,80)
Download addr 0x00000000 len 1385104 - virtual 0x01b2a008
Loading TE_DMLT, Build 108-971, Protocol 6.03(V14) 104-8 [F#00FF]
2: DSP code base 0x809ebfd0, max size 0x00204030 (80debfd0,80)
Download addr 0x00000000 len 1385104 - virtual 0x0172a008
Loading TE_DMLT, Build 108-971, Protocol 6.03(V14) 104-8 [F#00FF]
1: DSP code base 0x805ebfd0, max size 0x00204030 (80debfd0,80)
Download addr 0x00000000 len 1385104 - virtual 0x0132a008
Loading TE_1TR6, Build 108-971, Protocol 6.03(V14) 104-8 [F#00FF]
0: DSP code base 0x801ced00, max size 0x00221300 (80debfd0,80)
Download addr 0x00000000 len 1280704 - virtual 0x00f2a008
Loading Dialogic DSPDANA File Version 1.00 Build 110-846
Loading DIVA Server BRI 2M Kernel Version 1.00 Build 110-846
Loading DIVA Server BRI 2M SoftIP Kernel Version 1.00 Build 110-846
Loading HSCX Task Version 1.00 Build 110-846
Loading HSCXBR Task Version 1.00 Build 110-846
Loading HSCX Small Task Version 1.00 Build 110-846
Loading PIAFSD Task Version 1.00 Build 110-846
Loading V.110 Kernel Task Version 1.00 Build 110-846
Loading V.110 Overlay (600) Version 1.00 Build 110-846
Loading V.110 Overlay (1200) Version 1.00 Build 110-846
Loading V.110 Overlay (1200/75) Version 1.00 Build 110-846
Loading V.110 Overlay (75/1200) Version 1.00 Build 110-846
Loading V.110 Overlay (2400) Version 1.00 Build 110-846
Loading V.110 Overlay (4800,9600,19200,38400) Version 1.00 Build 110-846
Loading V.110 Overlay (7200,14400,28800) Version 1.00 Build 110-846
Loading V.110 Overlay (12000,24000) Version 1.00 Build 110-846
Loading V.110 Overlay (48000) Version 1.00 Build 110-846
Loading V.110 Overlay (56000) Version 1.00 Build 110-846
Loading V.110 Kernel Task BRI 2M Version 1.00 Build 110-846
Loading VOICEBR Task Version 1.00 Build 110-846
Loading DTMF Task Version 1.00 Build 110-846
Loading DTMFBR Task Version 1.00 Build 110-846
Loading SIG.MDM Task Version 1.00 Build 110-846
Loading TONEBR Task Version 1.00 Build 110-846
Loading MEASBR Task Version 1.00 Build 110-846
Loading LECBR Task Version 1.00 Build 110-846
Loading Conferencing Overlay Version 1.00 Build 110-846
Loading SIG Overlay Version 1.00 Build 110-846
Loading FSK OWN Overlay Version 1.00 Build 110-846
Loading V8.F34 Overlay Version 1.00 Build 110-846
Loading INFO Overlay Version 1.00 Build 110-846
Loading V.34 Overlay Version 1.00 Build 110-846
Loading INFOH.F34 Overlay Version 1.00 Build 110-846
Loading HV34.F34 Overlay Version 1.00 Build 110-846
Loading DIAL/FSK/FAX.F34 Overlay Version 1.00 Build 110-846
Loading DIAL.F34 Partial Overlay Version 1.00 Build 110-846
Loading FSKFAX.F34 Partial Overlay Version 1.00 Build 110-846
Loading FAX.F34 Partial Overlay Version 1.00 Build 110-846
Loading V.22/V.32 LEC Overlay Version 1.00 Build 110-846
Loading V.32 Partial Overlay Version 1.00 Build 110-846
Loading V.90 DPCM Overlay Version 1.00 Build 110-846
Loading V.90 APCM Overlay Version 1.00 Build 110-846
Loading V.22FC Overlay Version 1.00 Build 110-846
Loading V.22bis FC Overlay Version 1.00 Build 110-846
Loading V.29FC Overlay Version 1.00 Build 110-846
Loading V.18 OWN-LK Overlay Version 1.00 Build 110-846
Loading V.OWN Overlay Version 1.00 Build 110-846
Loading TIKRNL81.F34 Task Version 1.00 Build 110-846
Loading VKRNLBR.SEC Task Version 1.00 Build 110-846
Loading VKRNLSB.SEC Task Version 1.00 Build 110-846
Loading VKRNL Small Task Version 1.00 Build 110-846
Loading G.711 Overlay Version 1.00 Build 110-846
Loading RTP G.711/G.726 Overlay Version 1.00 Build 110-846
Loading RTP GSM Overlay Version 1.00 Build 110-846
Loading RTP G.729AB Overlay Version 1.00 Build 110-846
Loading CKRNLBR.SEC Task Version 1.00 Build 110-846
Loading CKRNLSB.SEC Task Version 1.00 Build 110-846
Loading VHook LEC.SEC Overlay Version 1.00 Build 110-846
Loading VHook SIG.SEC Overlay Version 1.00 Build 110-846
Read RAM init section, length=274 bytes
Read RAM init section, length=268 bytes
Read RAM init section, length=268 bytes
Read RAM init section, length=271 bytes
  CfgLib init memory length = 274
  InitialDspInfo = 0x80
  CardType = 0x58
  Serial No = 13796
  FPGAFeatures = 0x00000003
  XDIFeatures = 0x00000001
  CardAddress = 0xfb000000, CardID:00000002
  VIDI active:
    req base          : 21788000:00000000
    ind base          : 12048000:00000000
    segment length    : 32
    req buffer length : 4096
    ind buffer length : 4064
    ind counter offset: 4064
  XCONNECT DMA[0] = 0x10966000
  XCONNECT DMA[1] = 0x1ffb0000
  XCONNECT DMA[2] = 0x1d3a2000
  XCONNECT DMA[3] = 0x3514a000
  XCONNECT DMA[4] = 0x1ea84000
  XCONNECT DMA[5] = 0x1f648000
  CLOCK DATA = 0x00705000:0x00000000 base:128 length:4096
Used configuration space 384 of 65536 Bytes!
  CfgLib init memory length = 268
  InitialDspInfo = 0x80
  CardType = 0x58
  Serial No = 13796
  Port No = 1
  FPGAFeatures = 0x00000003
  XDIFeatures = 0x00000001
  CardAddress = 0xfb000000, CardID:00000003
  VIDI active:
    req base          : 34ac0000:00000000
    ind base          : 3463e000:00000000
    segment length    : 32
    req buffer length : 4096
    ind buffer length : 4064
    ind counter offset: 4064
  XCONNECT DMA[0] = 0x2eefe000
  XCONNECT DMA[1] = 0x286f6000
  XCONNECT DMA[2] = 0x2a200000
  XCONNECT DMA[3] = 0x1f92e000
  XCONNECT DMA[4] = 0x272e8000
  XCONNECT DMA[5] = 0x26284000
  CLOCK DATA = 0x00705000:0x00000000 base:192 length:4096
Used configuration space 381 of 65536 Bytes!
  CfgLib init memory length = 268
  InitialDspInfo = 0x80
  CardType = 0x58
  Serial No = 13796
  Port No = 2
  FPGAFeatures = 0x00000003
  XDIFeatures = 0x00000001
  CardAddress = 0xfb000000, CardID:00000004
  VIDI active:
    req base          : 336b5000:00000000
    ind base          : 24a5f000:00000000
    segment length    : 32
    req buffer length : 4096
    ind buffer length : 4064
    ind counter offset: 4064
  XCONNECT DMA[0] = 0x1dbce000
  XCONNECT DMA[1] = 0x2ac45000
  XCONNECT DMA[2] = 0x1bed6000
  XCONNECT DMA[3] = 0x2c7f6000
  XCONNECT DMA[4] = 0x23e76000
  XCONNECT DMA[5] = 0x33d02000
  CLOCK DATA = 0x00705000:0x00000000 base:256 length:4096
Used configuration space 381 of 65536 Bytes!
  CfgLib init memory length = 271
  InitialDspInfo = 0x80
  CardType = 0x58
  Serial No = 13796
  Port No = 3
  FPGAFeatures = 0x00000003
  XDIFeatures = 0x00000001
  CardAddress = 0xfb000000, CardID:00000005
  VIDI active:
    req base          : 2010e000:00000000
    ind base          : 1064f000:00000000
    segment length    : 32
    req buffer length : 4096
    ind buffer length : 4064
    ind counter offset: 4064
  XCONNECT DMA[0] = 0x27ae1000
  XCONNECT DMA[1] = 0x19853000
  XCONNECT DMA[2] = 0x2b85a000
  XCONNECT DMA[3] = 0x1f4af000
  XCONNECT DMA[4] = 0x1f4ae000
  XCONNECT DMA[5] = 0x1f4ad000
  CLOCK DATA = 0x00705000:0x00000000 base:320 length:4096
Used configuration space 384 of 65536 Bytes!
Raw protocol features: 000000ff
A: adapter start failed
 FAILED
Start background retrieval of initial XLOG for:
  Dialogic Diva UM-4BRI-8 PCI v2 SN:13796 - PORT 1 to /var/log/diva1.log
  Dialogic Diva UM-4BRI-8 PCI v2 SN:13796 - PORT 2 to /var/log/diva2.log
  Dialogic Diva UM-4BRI-8 PCI v2 SN:13796 - PORT 3 to /var/log/diva3.log
  Dialogic Diva UM-4BRI-8 PCI v2 SN:13796 - PORT 4 to /var/log/diva4.log
Wait until XLOG retrieval is completed ... OK
Load Diva IDI  driver ... OK
Load Diva M-Board driver ... OK
Load optimized Diva CAPI driver ... OK
Load Diva TTY  driver ... OK
Initialize Diva registry ............... OK

Vielleicht hast Du ja ein (oder auch zwei) Ideen dazu? Würde mir sehr helfen, denn ich balge mich nun schon paar Tage mit der Karte rum, die bei mir den namen "Diva" bisher voll verdient hat.

Dafür sollen Diven ja besonders gut in ihrem Fach sein.

achja:
Linux pbx1 2.6.18-194.17.1.el5.centos.plus
Asterisk 1.6.0.26-FONCORE-r78 (Trixbox)
chan_capi aus o.g. Diva4linux

Beste Grüße,


Niels.

 

[nielsd]

[gelöst] CAPI INFO 0x3303: Protocol error layer 3

..nach 3 Tagen inkl. Wochenende durchweg im Asterisk fällt's Konzentrieren doch langsam schwer.

Habe die Rufe in den falschen Kontext geführt. Durch korrigieren des Kontextes mit "Zugang" zu den gewünschten Nummern (z.B. "from-internal" trixbox default) tut es das, was es soll.

Das 1TR6 Problem (Firmware?) besteht noch - allerdings hat unsere lokale Telco uns versichert, das man an den Anschlüssen bereits ETSI bevorzugt.

Nun wende ich mich mal den Faxfeatures der Diva zu. Den DSP's muß man ja was zu tun geben...

An alle - insbesondere Armin, der hier offensichtlich viel zum Erfolg des Forums beiträgt - beste Grüße,

Niels.

http://www.dettenbach.de

 

[armincm]

Sehr schön, dass es jetzt funtioniert. Soweit ich mich erinnere ist 1TR6 nicht weiter unterstützt und bei der 4BRI konnte man bei 1TR6 auch kein anderes Protokoll auf einen anderen Port schalten.

Armin

 

[nielsd]

hmm,
ich hatte an meinem heimischen ISDN Mehrgeräteanschluß 1TR6 auszuwählen, um die Karte / PBX testen zu können. Bin daher fälschlicherweise davon ausgegangen, das es sich um einen "1TR6 Anschluß" der T-Com handelt - möglicherweise lag es aber auch am (bei mir defekten) melware Treiber.

Meine eigene PBX mit HFC und misdn zeigt DSS1 (Euro ISDN) an.

In Betrieb geht sie an 3x ISDN Basisanschluß eines lokalen Telefoncarriers mit eigener, proprietärer Technik, die ETSI macht.

Zumindest in den Docs der offiziellen Kartentreiber finden sich Beispiele für den "Mischbetrieb" von 1TR6 und ETSI (sollte ggf. mal jemand bei dialogic bereinigen). So findet sich z.B. in der Hilfe von divactrl u.a. "-f 1TR6 -f ETSI" um verschiedene Protokollstacks an verschiedenen Ports einzeln zu aktvieren.

Beste Grüße und vielen Dank!


Niels.

 

[armincm]

Das mit dem 1TR6 war früher mal möglich. Aber dann, in neueren Version der Firmware kamen so viele Features hinzu, dass es zu gross wurde für den Speicher der Karte. Die meisten anderen Protokolle sind so ähnlich, dass man das zusammen lassen kann, aber 1TR6 ist anders und braucht eine eigene Datei.
Wenn du also einen alten Treiber und alte Firmware nutzt, geht das bestimmt noch.

Armin