Probleme mit X-lite und Asterisk

[stephan411]

ja, ich bin auf der Astersik-Konsole. Wenn ich den Befehl help eingebe, erhalte ich folgende Befehle:


*CLI> help
! Execute a shell command
abort halt Cancel a running halt
database del Removes database key/value
database deltree Removes database keytree/values
database get Gets database value
database put Adds/updates database value
database show Shows database contents
debug channel Enable debugging on a channel
exit Exit Asterisk
help Display help list, or specific help on a command
load Load a dynamic module by name
logger reload Reopens the log files
logger rotate Rotates and reopens the log files
no debug channel Disable debugging on a channel
quit Exit Asterisk
reload Reload configuration
restart gracefully Restart Asterisk gracefully
restart now Restart Asterisk immediately
restart when convenient Restart Asterisk at empty call volume
set debug Set level of debug chattiness
set verbose Set level of verboseness
show applications Shows registered applications
show application Describe a specific application
show audio codecs Shows audio codecs
show channels Display information on channels
show channel Display information on a specific channel
show codecs Shows codecs
show codec Shows a specific codec
show config handles Show Config Handles
show dialplan Show dialplan
show file formats Displays file formats
show image codecs Shows image codecs
show image formats Displays image formats
show manager command Show manager command
show manager commands Show manager commands
show manager connected Show connected manager users
show modules List modules and info
show switches Show alternative switches
show uptime Show uptime information
show version Display version info
show video codecs Shows video codecs
soft hangup Request a hangup on a given channel
stop gracefully Gracefully shut down Asterisk
stop now Shut down Asterisk immediately
stop when convenient Shut down Asterisk at empty call volume
unload Unload a dynamic module by name

Da ist kein sip showpeers dabei.

Stephan

 

[kperas]

Gib mal show modules ein und poste die Ausgabe

Grüße
Klaus

 

[stephan411]

*CLI> show modules
Module Description Use Count
*CLI>

Gruß,
Sabrina

 

[kperas]

Du hast kein Modul geladen?!

Poste doch mal Deine modules.conf (aus /etc/asterisk/ ) und schau mal in /usr/lib/asterisk/modules/ nach, welche Module da drin sind. Vor allem, ist da das Modul chan_sip.so drin?

Grüße
Klaus

 

[stephan411]

Ich habe alle Module bei modules.conf ausgeschaltet, wenn ich nämlich load => chan_capi.so einbinde, tauchen Fehler beim Starten von Asterisk auf.
Ich weiß auch ncht, welche Module ich unbedingt brauche um Asterisk zum Laufen zu bringen. Vielleicht kannst du mir da ja weiter helfen ...
Ja, eine chan_sip.so habe ich, soll ich die einbinden?
Meine /etc/asterisk/modules.conf:
;
; Asterisk configuration file
;
; Module Loader configuration file
;

[modules]
autoload=no
;
; If you want, load the GTK console right away.
; Don't load the KDE console since
; it's not as sophisticated right now.
;
noload => pbx_gtkconsole.so
;load => pbx_gtkconsole.so
noload => pbx_kdeconsole.so
;
; Intercom application is obsoleted by
; chan_oss. Don't load it.
;
noload => app_intercom.so
;
; Explicitly load the chan_modem.so early on to be sure
; it loads before any of the chan_modem_* 's afte rit
;

noload => chan_modem.so


noload => res_musiconhold.so

;
; Load either OSS or ALSA, not both
; By default, load OSS only (automatically) and do not load ALSA
;
noload => chan_alsa.so
;noload => chan_oss.so
;
; Module names listed in "global" section will have symbols globally
; exported to modules loaded after them.
;
[global]
chan_modem.so=no
chan_capi.so=no
~
~
Danke!

Stephan