* an Integral 3

[diamond]

Hallo Forum,

ich lese hier schon einige Zeit als Gast und habe eine Menge dazu gelernt.

Da wir ein Angebot für ein Update unsere Telefonanlage für 27.000¤ erstmal nicht annehmen wollen haben wir nach Alternativen gesucht....und gefunden!


Ich habe es nun geschaft Asterisk mit einer FritzPCI über eine Nebenstelle zuverbinden.

Ich kann von meinem PC (X-Lite) alle Integral-3-Nebenstellen erreichen.
Umgekehrt leider nicht, also von meinem Integral NSt. #36 (TS13.24) nach Softphone klappt noch nicht.

Mein größeres Problem ist aber das ich gerne vom PC wählen möchten.

Ich habe dazu die TAPI von Phone-Suite installiert. Wenn ich jetzt eine interne oder externe Nummer vom PC anrufe, dann klingelt meine Nebenstelle (#36) und im Display sehe ich die NSt. des Asterisk (#78). Wenn ich abhebe dann habe ich das interne Freizeichen, mehr nicht. CLI: zeigt das an:

****Begin****
Jun 26 14:36:21 NOTICE[814]: channel.c:2450 __ast_request_and_dial: Don't know what to do with control frame 15
> Channel CAPI/ISDN1/36-8 was answered.
-- Executing Set("CAPI/ISDN1/36-8", "LANGUAGE()=de") in new stack
-- Executing Set("CAPI/ISDN1/36-8", "CALLERID(name)=MH") in new stack
-- Executing Set("CAPI/ISDN1/36-8", "CALLERID(number)=36") in new stack
-- Executing Dial("CAPI/ISDN1/36-8", "CAPI/contr1/37|120") in new stack
-- Called contr1/37
> CAPI INFO 0x34af: Resources unavailable, unspecified
== ISDN1: CAPI Hangingup
== No one is available to answer at this time (1:0/0/0)
-- Executing Goto("CAPI/ISDN1/36-8", "incoming|37-NOANSWER|1") in new stack
-- Goto (incoming,37-NOANSWER,1)
Jun 26 14:36:24 WARNING[913]: pbx.c:2348 __ast_pbx_run: Channel 'CAPI/ISDN1/36-8' sent into invalid extension '37-NOANSWER' in context 'incoming', but no invalid handler
-- Executing Hangup("CAPI/ISDN1/36-8", "") in new stack
== Spawn extension (incoming, h, 1) exited non-zero on 'CAPI/ISDN1/36-8'
== ISDN1: CAPI Hangingup
> CAPI INFO 0x3490: Normal call clearing
eis*CLI>

****End****

Wenn ich aber vom PC (TAPI) an ein anderes X-Lite (#92) wähle, dann klingelt meine Nst (#36). Wenn ich dann abhebe stellt Asterisk eine Verbindung zu #92 (X-Lite) her und ich kann telefonieren.

CLI sagt:
****Begin****
Jun 26 14:38:25 NOTICE[814]: channel.c:2450 __ast_request_and_dial: Don't know what to do with control frame 15
> Channel CAPI/ISDN1/36-b was answered.
-- Executing Set("CAPI/ISDN1/36-b", "LANGUAGE()=de") in new stack
-- Executing Set("CAPI/ISDN1/36-b", "CALLERID(name)=MH") in new stack
-- Executing Set("CAPI/ISDN1/36-b", "CALLERID(number)=36") in new stack
-- Executing Dial("CAPI/ISDN1/36-b", "SIP/92|5") in new stack
Jun 26 14:38:26 NOTICE[933]: app_dial.c:1029 dial_exec_full: Unable to create channel of type 'SIP' (cause 3 - No route to destination)
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing Goto("CAPI/ISDN1/36-b", "incoming|92-CHANUNAVAIL|1") in new stack
-- Goto (incoming,92-CHANUNAVAIL,1)
-- Executing Set("CAPI/ISDN1/36-b", "LANGUAGE()=de") in new stack
-- Executing VoiceMail("CAPI/ISDN1/36-b", "b92") in new stack
-- Playing 'vm-theperson' (language 'de')
-- Playing 'digits/9' (language 'de')
-- Playing 'digits/2' (language 'de')
-- Playing 'vm-isonphone' (language 'de')
-- Playing 'vm-intro' (language 'de')
== Spawn extension (incoming, 92-CHANUNAVAIL, 2) exited non-zero on 'CAPI/ISDN1/36-b'
-- Executing Hangup("CAPI/ISDN1/36-b", "") in new stack
== Spawn extension (incoming, h, 1) exited non-zero on 'CAPI/ISDN1/36-b'
== ISDN1: CAPI Hangingup
> CAPI INFO 0x3490: Normal call clearing
eis*CLI>

****End****

Ich habe nun einen Techniker bei Avaya angerufen, der sagte mir das ist mit der Integral 3 nicht möglich. Das kann ich aber nicht glauben.

Wer kann mir das bestätigen, bzw helfen, dass mein Vorhaben doch gelingt.

Vielen Dank und Gruß
Diamond

 

[diamond]

Schade, hat niemand einen kleinen Tipp für mich?
Hier noch die Meldung von capi debug:



****Begin****

eis*CLI> capi debug
CAPI Debugging Enabled
== Manager 'root' logged off from 192.168.1.217
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'root' logged on from 192.168.1.217
> data = contr1/36
> parsed dialstring: 'contr1' 'NULL' '36' ''
> capi request controller = 1
> CAPI devicestate requested for ISDN1/36
> parsed dialstring: 'contr1' 'NULL' '36' ''
== ISDN1: Call CAPI/ISDN1/36-1 (pres=0x00, ton=0x00)
CONNECT_REQ ID=002 #0x0003 LEN=0045
Controller/PLCI/NCCI = 0x1
CIPValue = 0x1
CalledPartyNumber = <80>36
CallingPartyNumber = <00 80>36
CalledPartySubaddress = default
CallingPartySubaddress = default
BProtocol
B1protocol = 0x1
B2protocol = 0x1
B3protocol = 0x0
B1configuration = default
B2configuration = default
B3configuration = default
BC = default
LLC = default
HLC = default
AdditionalInfo
BChannelinformation = <00 00>
Keypadfacility = default
Useruserdata = default
Facilitydataarray = default

> CAPI devicestate requested for ISDN1/36
CONNECT_CONF ID=002 #0x0003 LEN=0014
Controller/PLCI/NCCI = 0x101
Info = 0x0

-- ISDN1: received CONNECT_CONF PLCI = 0x101
INFO_IND ID=002 #0x0094 LEN=0015
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x8002
InfoElement = default

INFO_RESP ID=002 #0x0094 LEN=0012
Controller/PLCI/NCCI = 0x101

-- ISDN1: info element CALL PROCEEDING
INFO_IND ID=002 #0x0095 LEN=0016
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x18
InfoElement = <89>

INFO_RESP ID=002 #0x0095 LEN=0012
Controller/PLCI/NCCI = 0x101

-- ISDN1: info element CHANNEL IDENTIFICATION 89
Jun 27 11:19:51 NOTICE[2486]: channel.c:2450 __ast_request_and_dial: Don't know what to do with control frame 15
INFO_IND ID=002 #0x0096 LEN=0015
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x8001
InfoElement = default

INFO_RESP ID=002 #0x0096 LEN=0012
Controller/PLCI/NCCI = 0x101

-- ISDN1: info element ALERTING
CONNECT_ACTIVE_IND ID=002 #0x0097 LEN=0019
Controller/PLCI/NCCI = 0x101
ConnectedNumber = <00 80>36
ConnectedSubaddress = default
LLC = default

CONNECT_ACTIVE_RESP ID=002 #0x0097 LEN=0012
Controller/PLCI/NCCI = 0x101

CONNECT_B3_REQ ID=002 #0x0004 LEN=0013
Controller/PLCI/NCCI = 0x101
NCPI = default

-- ISDN1: sent CONNECT_B3_REQ PLCI=0x101
CONNECT_B3_CONF ID=002 #0x0004 LEN=0014
Controller/PLCI/NCCI = 0x10101
Info = 0x0

CONNECT_B3_ACTIVE_IND ID=002 #0x0098 LEN=0013
Controller/PLCI/NCCI = 0x10101
NCPI = default

CONNECT_B3_ACTIVE_RESP ID=002 #0x0098 LEN=0012
Controller/PLCI/NCCI = 0x10101

> CAPI devicestate requested for ISDN1/36
> Channel CAPI/ISDN1/36-1 was answered.
-- Executing Set("CAPI/ISDN1/36-1", "LANGUAGE()=de") in new stack
-- Executing Set("CAPI/ISDN1/36-1", "CALLERID(name)=Markus Hermann") in new stack
-- Executing Set("CAPI/ISDN1/36-1", "CALLERID(number)=36") in new stack
-- Executing Dial("CAPI/ISDN1/36-1", "CAPI/contr1/37|120") in new stack
> data = contr1/37
> parsed dialstring: 'contr1' 'NULL' '37' ''
> capi request controller = 1
> CAPI devicestate requested for ISDN1/37
> parsed dialstring: 'contr1' 'NULL' '37' ''
== ISDN1: Call CAPI/ISDN1/37-2 (pres=0x00, ton=0x00)
CONNECT_REQ ID=002 #0x0005 LEN=0045
Controller/PLCI/NCCI = 0x1
CIPValue = 0x1
CalledPartyNumber = <80>37
CallingPartyNumber = <00 80>36
CalledPartySubaddress = default
CallingPartySubaddress = default
BProtocol
B1protocol = 0x1
B2protocol = 0x1
B3protocol = 0x0
B1configuration = default
B2configuration = default
B3configuration = default
BC = default
LLC = default
HLC = default
AdditionalInfo
BChannelinformation = <00 00>
Keypadfacility = default
Useruserdata = default
Facilitydataarray = default

-- Called contr1/37
CONNECT_CONF ID=002 #0x0005 LEN=0014
Controller/PLCI/NCCI = 0x201
Info = 0x0

-- ISDN1: received CONNECT_CONF PLCI = 0x201
> CAPI devicestate requested for ISDN1/37
INFO_IND ID=002 #0x009e LEN=0017
Controller/PLCI/NCCI = 0x201
InfoNumber = 0x8
InfoElement = <81 af>

INFO_RESP ID=002 #0x009e LEN=0012
Controller/PLCI/NCCI = 0x201

-- ISDN1: info element CAUSE 81 af
DISCONNECT_IND ID=002 #0x009f LEN=0014
Controller/PLCI/NCCI = 0x201
Reason = 0x34af

DISCONNECT_RESP ID=002 #0x009f LEN=0012
Controller/PLCI/NCCI = 0x201

> CAPI INFO 0x34af: Resources unavailable, unspecified
== ISDN1: CAPI Hangingup
> CAPI devicestate requested for ISDN1/37
== ISDN1: Interface cleanup PLCI=0x201
== No one is available to answer at this time (1:0/0/0)
-- Executing Goto("CAPI/ISDN1/36-1", "incoming|37-NOANSWER|1") in new stack
-- Goto (incoming,37-NOANSWER,1)
Jun 27 11:19:57 WARNING[2490]: pbx.c:2348 __ast_pbx_run: Channel 'CAPI/ISDN1/36-1' sent into invalid extension '37-NOANSWER' in context 'incoming', but no invalid handler
-- Executing Hangup("CAPI/ISDN1/36-1", "") in new stack
== Spawn extension (incoming, h, 1) exited non-zero on 'CAPI/ISDN1/36-1'
== ISDN1: CAPI Hangingup
-- ISDN1: activehangingup (cause=16)
DISCONNECT_B3_REQ ID=002 #0x0006 LEN=0013
Controller/PLCI/NCCI = 0x10101
NCPI = default

DISCONNECT_B3_CONF ID=002 #0x0006 LEN=0014
Controller/PLCI/NCCI = 0x10101
Info = 0x0

DISCONNECT_B3_IND ID=002 #0x00a0 LEN=0015
Controller/PLCI/NCCI = 0x10101
Reason_B3 = 0x3301
NCPI = default

DISCONNECT_B3_RESP ID=002 #0x00a0 LEN=0012
Controller/PLCI/NCCI = 0x10101

DISCONNECT_REQ ID=002 #0x0007 LEN=0017
Controller/PLCI/NCCI = 0x101
AdditionalInfo
BChannelinformation = default
Keypadfacility = default
Useruserdata = default
Facilitydataarray = default

DISCONNECT_CONF ID=002 #0x0007 LEN=0014
Controller/PLCI/NCCI = 0x101
Info = 0x0

> CAPI devicestate requested for ISDN1/37
> CAPI devicestate requested for ISDN1/36
> CAPI devicestate requested for ISDN1/36
INFO_IND ID=002 #0x00a1 LEN=0017
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x8
InfoElement = <81 90>

INFO_RESP ID=002 #0x00a1 LEN=0012
Controller/PLCI/NCCI = 0x101

-- ISDN1: info element CAUSE 81 90
DISCONNECT_IND ID=002 #0x00a2 LEN=0014
Controller/PLCI/NCCI = 0x101
Reason = 0x3490

DISCONNECT_RESP ID=002 #0x00a2 LEN=0012
Controller/PLCI/NCCI = 0x101

> CAPI INFO 0x3490: Normal call clearing
== ISDN1: Interface cleanup PLCI=0x101
eis*CLI>


****End****


Wenn ich die Nst #78 (Asterisk an TK-S0) dann kommte die Meldung :
== ISDN1: Incoming call '36' -> '77'


SIP <-> SIP klappt auch, SIP -> TK (NSt. 36) klappt auch. TK -> GEHT NICHT,

liegt da der Hund begraben?

Für jeden sachdienlichen Hinweis dankbar.

Gruß
Diamond

 

[armincm]

Das ist wohl das Problem, die Anlage meldet:
CAPI INFO 0x34af: Resources unavailable, unspecified

Armin

 

[diamond]

Das ist wohl das Problem, die Anlage meldet:
CAPI INFO 0x34af: Resources unavailable, unspecified

Armin

Ja, aber es sind beide B-Kanäle frei.
Wenn ich per TAPI-Wahl (Phonesuite) ein SIP-Telefon (X-Lite) anrufe, dann wählt Asteriks meine Nebenstelle (36) an und stellt zum den SIP (91) eine Verbindung her. Aber warum nicht zu einem anderen ISDN-Teilnehmer.

----
Das Problem von meiner NSt. an ein SIP zu telefonieren habe ich gelöst:

Es musste in der /etc/asterisk/capi.conf isdnmode=did eingetragen werden.

----

Wenn jetzt noch einer weiß warum * nicht weitervermittelt wäre glücklich

Gruß Diamond

 

[diamond]

Komme der Sache langsam näher aber nun hängts hier:


Jul 13 11:01:08 NOTICE[8326]: channel.c:2450 __ast_request_and_dial: Don't know what to do with control frame 15
> Channel CAPI/ISDN1/36-27 was answered.
== Starting CAPI/ISDN1/36-27 at incoming,0**37,1 failed so falling back to ext en 's'
== Starting CAPI/ISDN1/36-27 at incoming,s,1 still failed so falling back to c ontext 'default'
Jul 13 11:01:10 WARNING[8732]: pbx.c:2348 __ast_pbx_run: Channel 'CAPI/ISDN1/36- 27' sent into invalid extension 's' in context 'default', but no invalid handler
-- Executing Hangup("CAPI/ISDN1/36-27", "") in new stack
== Spawn extension (default, h, 1) exited non-zero on 'CAPI/ISDN1/36-27'
== ISDN1: CAPI Hangingup
> CAPI INFO 0x3490: Normal call clearing


Was meint * damit? :noidea:

Jemand 'nen Tipp für mich? Danke und Gruß
Diamond