Asterisk, Hylafax, IAXmodem und chan_capi

Sidebar Sidebar
Upgrade 3CX to v18 and get it hosted free!
S

smiele

Neuer User
Mitglied seit
29 Dez 2009
Beiträge
9
Punkte für Reaktionen
0
Punkte
0
Hallihallo, ich versuche zur Zeit eine Faxlösung mit asterisk und iaxmodem zu realisieren, allerdings hab ich dabei folgendes problem:

Ich nutze:
Debian mit 2.6.26-2-amd64 Kernel
Asterisk 1.6.0.20
chan_capi 1.1.4
Dialogic Diva 4BRI-8 PCIe v2 - PORT 1 SN: 3125

( in einem anderen post habe ich ein Problem mit einem analogen Fax, ist aber ne andere Baustelle :) )

Telefonie an sich, intern sowie extern über ISDN und capi kein
Problem, funktioniert tadellos.


Fax-raus: Hylafax -> ixamodem -> asterisk -> isdn
Fax-rein: isdn -> asterisk -> iaxmodem -> hylafax


Wenn ich nun ein Fax versenden möchte ( z.b. über sendfax -n -d <nummer> /ein/text/file ) ruft Asterisk ganz brav das externe Modem an, die 2 scheinen ein wenig miteinander zu reden, und irgendwann legt die Gegenstelle einfach auf.

Vielleicht hat hier jemand eine idee, ich bin mit meinem Latein mal wieder am Ende:


capi.conf
Code: 
; ----------------------------------------------------------------------
;  CONFIGURATION SCRIPT FOR EICON DIVA ISDN ADAPTERS
;  THIS SCRIPT WAS GENERATED AUTOMATICALLY BY
;  /usr/lib/eicon/divas/Config
; ----------------------------------------------------------------------

[general]
; ----------------------------------------------
; /usr/lib/eicon/divas/chancapi.general
; ----------------------------------------------
nationalprefix=0        ; or for example "+49"
internationalprefix=00  ; or for example "+"
;subscriberprefix=+4969 ; prefix including area code (some lines need this)
rxgain=1.0       ;linear receive gain, 1.0 = no change, use Diva rxdgain and rxagc for gain control
txgain=1.0       ;linear transmit gain, 1.0 = no change, use Diva txdgain and txagc for gain control
language=de      ;set default language
;ulaw=yes        ;set this, if you live in u-law world instead of a-law

;jb.....         ;with Asterisk 1.4 you can configure jitterbuffer,
                 ;see Asterisk documentation for all jb* setting available.
;mohinterpret=default ;Asterisk 1.4: default music on hold class when placed on hold.


[ISDN1]
ntmode=no
isdnmode=msn
immediate=yes
incomingmsn=*
group=1
controller=1
softdtmf=1
relaxdtmf=off
faxdetect=both
faxdetecttime=0
accountcode=
context=isdn-in
holdtype=local
echocancelold=no
bridge=yes
devices=2
echocancel=no
echocancelnlp=0
allow=all

[ISDN2]
ntmode=no
isdnmode=msn
immediate=yes
incomingmsn=* ;Use Diva MSN settings
group=1
controller=2
softdtmf=1
relaxdtmf=off
faxdetect=both
faxdetecttime=0
accountcode=
context=isdn-in
holdtype=local
echocancelold=no
bridge=yes
devices=2
echocancel=no
echocancelnlp=0
allow=all

[ISDN3]
ntmode=no
isdnmode=msn
immediate=yes
incomingmsn=* ;Use Diva MSN settings
group=1
controller=3
softdtmf=1
relaxdtmf=off
faxdetect=both
faxdetecttime=0
accountcode=
context=isdn-in
holdtype=local
echocancelold=no
bridge=yes
devices=2
echocancel=no
echocancelnlp=0
allow=all

[ISDN4]
ntmode=no
isdnmode=msn
immediate=yes
incomingmsn=* ;Use Diva MSN settings
group=1
controller=4
softdtmf=1
relaxdtmf=off
faxdetect=both
faxdetecttime=0
accountcode=
context=isdn-in
holdtype=local
echocancelold=no
bridge=yes
devices=2
echocancel=no
echocancelnlp=0
allow=all


iax.conf:

Code: 
[general]
;bindport=4569
;bindaddr=0.0.0.0
;disallow=all
allow=ulaw
allow=alaw
jitterbuffer=no
forcejitterbuffer=no
;tos=lowdelay
autokill=yes
bandwidth=low

[iaxmodem]
type=friend
secret=iaxmodem
port=4570
host=dynamic
context=fax
;disallow=all
allow=all


iaxmodem cfg:
Code: 
asteriskEWS:/etc/asterisk# cat /etc/iaxmodem/ttyIAX0
device  /dev/ttyIAX0
owner   uucp:uucp
mode    660
port    4570
refresh 60
server  127.0.0.1
peername        iaxmodem
secret  iaxmodem

ps ax | grep iax + getty:

Code: 
 4241 pts/0    Ss+    0:00 /usr/bin/iaxmodem ttyIAX0

 4242 ?        Ss     0:00 /usr/sbin/faxgetty ttyIAX0

hylafax log eines jobs:

Code: 
Jan 04 18:34:24.01: [ 4630]: SESSION BEGIN 000000073 49<externe msn>
Jan 04 18:34:24.01: [ 4630]: HylaFAX (tm) Version 4.4.4
Jan 04 18:34:24.01: [ 4630]: SEND FAX: JOB 24 DEST <externe msn> COMMID 000000073 DEVICE '/dev/ttyIAX0' FROM 'root <root@asteriskEWS>' USER root
Jan 04 18:34:24.01: [ 4630]: <-- [12:AT+FCLASS=1\r]
Jan 04 18:34:24.01: [ 4630]: --> [2:OK]
Jan 04 18:34:24.01: [ 4630]: DIAL <externe msn>
Jan 04 18:34:24.01: [ 4630]: <-- [16:ATDT<externe msn>\r]
Jan 04 18:34:40.35: [ 4630]: --> [7:CONNECT]
Jan 04 18:34:41.67: [ 4630]: --> [2:OK]
Jan 04 18:34:41.80: [ 4630]: REMOTE NSF "AD 00 36 04 00 00 00 00"
Jan 04 18:34:41.80: [ 4630]: NSF remote fax equipment: HP
Jan 04 18:34:41.80: [ 4630]: <-- [9:AT+FRH=3\r]
Jan 04 18:34:42.37: [ 4630]: --> [7:CONNECT]
Jan 04 18:34:42.37: [ 4630]: --> [2:OK]
Jan 04 18:34:42.37: [ 4630]: REMOTE CSI ""
Jan 04 18:34:42.37: [ 4630]: <-- [9:AT+FRH=3\r]
Jan 04 18:34:42.79: [ 4630]: --> [7:CONNECT]
Jan 04 18:34:42.83: [ 4630]: --> [2:OK]
Jan 04 18:34:42.83: [ 4630]: REMOTE best rate 33600 bit/s
Jan 04 18:34:42.83: [ 4630]: REMOTE max A4 page width (215 mm)
Jan 04 18:34:42.83: [ 4630]: REMOTE max unlimited page length
Jan 04 18:34:42.83: [ 4630]: REMOTE best vres 300 x 300 dpi
Jan 04 18:34:42.83: [ 4630]: REMOTE format support: MH, MR, MMR
Jan 04 18:34:42.83: [ 4630]: REMOTE supports T.30 Annex A, 256-byte ECM
Jan 04 18:34:42.83: [ 4630]: REMOTE best 0 ms/scanline
Jan 04 18:34:42.83: [ 4630]: USE 14400 bit/s
Jan 04 18:34:42.83: [ 4630]: USE error correction mode
Jan 04 18:34:42.83: [ 4630]: SEND file "docq/doc23.ps;c0"
Jan 04 18:34:42.83: [ 4630]: USE A4 page width (215 mm)
Jan 04 18:34:42.83: [ 4630]: USE unlimited page length
Jan 04 18:34:42.83: [ 4630]: USE 3.85 line/mm
Jan 04 18:34:42.83: [ 4630]: USE 2-D MMR
Jan 04 18:34:42.83: [ 4630]: USE 0 ms/scanline
Jan 04 18:34:42.83: [ 4630]: SEND training at v.17 14400 bit/s
Jan 04 18:34:42.83: [ 4630]: <-- [9:AT+FRS=7\r]
Jan 04 18:34:42.91: [ 4630]: --> [2:OK]
Jan 04 18:34:42.91: [ 4630]: <-- [9:AT+FTH=3\r]
Jan 04 18:34:42.93: [ 4630]: --> [7:CONNECT]
Jan 04 18:34:42.93: [ 4630]: <-- data [23]
Jan 04 18:34:42.93: [ 4630]: <-- data [2]
Jan 04 18:34:44.47: [ 4630]: --> [7:CONNECT]
Jan 04 18:34:44.47: [ 4630]: <-- data [7]
Jan 04 18:34:44.47: [ 4630]: <-- data [2]
Jan 04 18:34:44.87: [ 4630]: --> [2:OK]
Jan 04 18:34:44.89: [ 4630]: <-- [9:AT+FTS=7\r]
Jan 04 18:34:44.97: [ 4630]: --> [2:OK]
Jan 04 18:34:44.97: [ 4630]: <-- [11:AT+FTM=145\r]
Jan 04 18:34:44.99: [ 4630]: --> [7:CONNECT]
Jan 04 18:34:44.99: [ 4630]: DELAY 400 ms
Jan 04 18:34:45.39: [ 4630]: <-- data [1024]
Jan 04 18:34:45.39: [ 4630]: <-- data [1024]
Jan 04 18:34:45.39: [ 4630]: <-- data [652]
Jan 04 18:34:45.39: [ 4630]: <-- data [2]
Jan 04 18:34:47.93: [ 4630]: --> [2:OK]
Jan 04 18:34:47.93: [ 4630]: <-- [9:AT+FRH=3\r]
Jan 04 18:34:50.11: [ 4630]: --> [7:CONNECT]
Jan 04 18:34:51.41: [ 4630]: --> [2:OK]
Jan 04 18:34:51.41: [ 4630]: REMOTE NSF "AD 00 36 04 00 00 00 00"
Jan 04 18:34:51.41: [ 4630]: NSF remote fax equipment: HP
Jan 04 18:34:51.41: [ 4630]: <-- [9:AT+FRH=3\r]
Jan 04 18:34:52.11: [ 4630]: --> [7:CONNECT]
Jan 04 18:34:52.11: [ 4630]: --> [2:OK]
Jan 04 18:34:52.11: [ 4630]: REMOTE CSI ""
Jan 04 18:34:52.11: [ 4630]: <-- [9:AT+FRH=3\r]
Jan 04 18:34:52.53: [ 4630]: --> [7:CONNECT]
Jan 04 18:34:52.57: [ 4630]: --> [2:OK]
Jan 04 18:34:52.57: [ 4630]: SEND training at v.17 14400 bit/s
Jan 04 18:34:52.57: [ 4630]: <-- [9:AT+FRS=7\r]
Jan 04 18:34:52.65: [ 4630]: --> [2:OK]
Jan 04 18:34:52.65: [ 4630]: <-- [9:AT+FTH=3\r]
Jan 04 18:34:52.65: [ 4630]: --> [7:CONNECT]
Jan 04 18:34:52.65: [ 4630]: <-- data [23]
Jan 04 18:34:52.65: [ 4630]: <-- data [2]
Jan 04 18:34:54.19: [ 4630]: --> [7:CONNECT]
Jan 04 18:34:54.19: [ 4630]: <-- data [7]
Jan 04 18:34:54.19: [ 4630]: <-- data [2]
Jan 04 18:34:54.59: [ 4630]: --> [2:OK]
Jan 04 18:34:54.59: [ 4630]: <-- [9:AT+FTS=7\r]
Jan 04 18:34:54.67: [ 4630]: --> [2:OK]
Jan 04 18:34:54.67: [ 4630]: <-- [11:AT+FTM=145\r]
Jan 04 18:34:54.69: [ 4630]: --> [7:CONNECT]
Jan 04 18:34:54.69: [ 4630]: DELAY 400 ms
Jan 04 18:34:55.09: [ 4630]: <-- data [1024]
Jan 04 18:34:55.09: [ 4630]: <-- data [1024]
Jan 04 18:34:55.09: [ 4630]: <-- data [652]
Jan 04 18:34:55.09: [ 4630]: <-- data [2]
Jan 04 18:34:57.63: [ 4630]: --> [2:OK]
Jan 04 18:34:57.63: [ 4630]: <-- [9:AT+FRH=3\r]
Jan 04 18:35:00.73: [ 4630]: --> [0:]
Jan 04 18:35:00.73: [ 4630]: MODEM <Empty line>
Jan 04 18:35:00.73: [ 4630]: <-- data [1]
Jan 04 18:35:00.75: [ 4630]: --> [2:OK]
Jan 04 18:35:00.75: [ 4630]: <-- [9:AT+FRS=7\r]
Jan 04 18:35:00.77: [ 4630]: --> [2:OK]
Jan 04 18:35:00.77: [ 4630]: SEND training at v.17 12000 bit/s
Jan 04 18:35:00.77: [ 4630]: <-- [9:AT+FTH=3\r]
Jan 04 18:35:00.77: [ 4630]: --> [7:CONNECT]
Jan 04 18:35:00.77: [ 4630]: <-- data [23]
Jan 04 18:35:00.77: [ 4630]: <-- data [2]
Jan 04 18:35:02.31: [ 4630]: --> [7:CONNECT]
Jan 04 18:35:02.31: [ 4630]: <-- data [7]
Jan 04 18:35:02.31: [ 4630]: <-- data [2]
Jan 04 18:35:02.71: [ 4630]: --> [2:OK]
Jan 04 18:35:02.71: [ 4630]: <-- [9:AT+FTS=7\r]
Jan 04 18:35:02.79: [ 4630]: --> [2:OK]
Jan 04 18:35:02.79: [ 4630]: <-- [11:AT+FTM=121\r]
Jan 04 18:35:02.81: [ 4630]: --> [7:CONNECT]
Jan 04 18:35:02.81: [ 4630]: DELAY 400 ms
Jan 04 18:35:03.21: [ 4630]: <-- data [1024]
Jan 04 18:35:03.21: [ 4630]: <-- data [1024]
Jan 04 18:35:03.21: [ 4630]: <-- data [202]
Jan 04 18:35:03.21: [ 4630]: <-- data [2]
Jan 04 18:35:05.75: [ 4630]: --> [2:OK]
Jan 04 18:35:05.75: [ 4630]: <-- [9:AT+FRH=3\r]
Jan 04 18:35:06.97: [ 4630]: --> [7:CONNECT]
Jan 04 18:35:08.27: [ 4630]: --> [2:OK]
Jan 04 18:35:08.27: [ 4630]: REMOTE NSF "AD 00 36 04 00 00 00 00"
Jan 04 18:35:08.27: [ 4630]: NSF remote fax equipment: HP
Jan 04 18:35:08.27: [ 4630]: <-- [9:AT+FRH=3\r]
Jan 04 18:35:08.97: [ 4630]: --> [7:CONNECT]
Jan 04 18:35:08.97: [ 4630]: --> [2:OK]
Jan 04 18:35:08.97: [ 4630]: REMOTE CSI ""
Jan 04 18:35:08.97: [ 4630]: <-- [9:AT+FRH=3\r]
Jan 04 18:35:09.41: [ 4630]: --> [7:CONNECT]
Jan 04 18:35:09.45: [ 4630]: --> [2:OK]
Jan 04 18:35:09.45: [ 4630]: SEND training at v.17 12000 bit/s
Jan 04 18:35:09.45: [ 4630]: <-- [9:AT+FRS=7\r]
Jan 04 18:35:09.51: [ 4630]: --> [2:OK]
Jan 04 18:35:09.51: [ 4630]: <-- [9:AT+FTH=3\r]
Jan 04 18:35:09.53: [ 4630]: --> [7:CONNECT]
Jan 04 18:35:09.53: [ 4630]: <-- data [23]
Jan 04 18:35:09.53: [ 4630]: <-- data [2]
Jan 04 18:35:11.07: [ 4630]: --> [7:CONNECT]
Jan 04 18:35:11.07: [ 4630]: <-- data [7]
Jan 04 18:35:11.07: [ 4630]: <-- data [2]
Jan 04 18:35:11.47: [ 4630]: --> [2:OK]
Jan 04 18:35:11.47: [ 4630]: <-- [9:AT+FTS=7\r]
Jan 04 18:35:11.55: [ 4630]: --> [2:OK]
Jan 04 18:35:11.55: [ 4630]: <-- [11:AT+FTM=121\r]
Jan 04 18:35:11.57: [ 4630]: --> [7:CONNECT]
Jan 04 18:35:11.57: [ 4630]: DELAY 400 ms
Jan 04 18:35:11.97: [ 4630]: <-- data [1024]
Jan 04 18:35:11.97: [ 4630]: <-- data [1024]
Jan 04 18:35:11.97: [ 4630]: <-- data [202]
Jan 04 18:35:11.97: [ 4630]: <-- data [2]
Jan 04 18:35:14.51: [ 4630]: --> [2:OK]
Jan 04 18:35:14.51: [ 4630]: <-- [9:AT+FRH=3\r]
Jan 04 18:35:16.43: [ 4630]: --> [7:CONNECT]
Jan 04 18:35:17.57: [ 4630]: --> [2:OK]
Jan 04 18:35:17.57: [ 4630]: TRAINING failed
Jan 04 18:35:17.57: [ 4630]: <-- [9:AT+FRS=7\r]
Jan 04 18:35:17.63: [ 4630]: --> [2:OK]
Jan 04 18:35:17.63: [ 4630]: <-- [9:AT+FTH=3\r]
Jan 04 18:35:17.63: [ 4630]: --> [7:CONNECT]
Jan 04 18:35:17.63: [ 4630]: <-- data [3]
Jan 04 18:35:17.63: [ 4630]: <-- data [2]
Jan 04 18:35:18.71: [ 4630]: --> [2:OK]
Jan 04 18:35:19.71: [ 4630]: <-- [5:ATH0\r]
Jan 04 18:35:19.81: [ 4630]: --> [2:OK]
Jan 04 18:35:19.81: [ 4630]: SESSION END


asterisk log ( capi debug + verbose 5 )

Code: 
I>     -- Accepting AUTHENTICATED call from 127.0.0.1:
       > requested format = alaw,
       > requested prefs = (),
       > actual format = ulaw,
       > host prefs = (ulaw|alaw),
       > priority = mine
    -- Executing [XXXXX@fax:1] Dial("IAX2/iaxmodem-1287", "CAPI/g1/XXXXXX,55") in new stack
       > data = g1/XXXXX format=8
       > parsed dialstring: 'g1' 'NULL' 'XXXXX' ''
       > capi request group = 2
  == ISDN4#02: setting format ulaw - 0x80e (gsm|ulaw|alaw|g726)VOCODER
       > parsed dialstring: 'g1' 'NULL' 'XXXXXX' ''
       > capi: peerlink -1 allocated, peer is unlinked
  == ISDN4#02: Call CAPI/ISDN4#02/XXXXXX-0   (pres=0x00, ton=0x00)
       > chan_capi devicestate requested for ISDN4#02/XXXXXX is 'In use'
CONNECT_REQ                ID=002 #0x0015 LEN=0062
  Controller/PLCI/NCCI            = 0x4
  CIPValue                        = 0x1
  CalledPartyNumber               = <80>XXXXX
  CallingPartyNumber              = <00 80>
  CalledPartySubaddress           = default
  CallingPartySubaddress          = default
  BProtocol
   B1protocol                     = 0x1f
   B2protocol                     = 0x1
   B3protocol                     = 0x0
   B1configuration                = <00 04 03 00 a0 00>
   B2configuration                = default
   B3configuration                = default
   GlobalConfiguration            = default
  BC                              = default
  LLC                             = default
  HLC                             = default
  AdditionalInfo
   BChannelinformation            = <00 00>
   Keypadfacility                 = default
   Useruserdata                   = default
   Facilitydataarray              = default
   SendingComplete                = <01 00>

    -- Called g1/XXXXX
CAPI: ApplId=0x0002 Command=0x02 SubCommand=0x81 MsgNum=0x0015 NCCI=0x00000104
CONNECT_CONF               ID=002 #0x0015 LEN=0014
  Controller/PLCI/NCCI            = 0x104
  Info                            = 0x0

    -- ISDN4#02: received CONNECT_CONF PLCI = 0x104
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x0000 NCCI=0x00000104
INFO_IND                   ID=002 #0x0000 LEN=0016
  Controller/PLCI/NCCI            = 0x104
  InfoNumber                      = 0x18
  InfoElement                     = <89>

INFO_RESP                  ID=002 #0x0000 LEN=0012
  Controller/PLCI/NCCI            = 0x104

    -- ISDN4#02: info element CHANNEL IDENTIFICATION 89
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x0001 NCCI=0x00000104
INFO_IND                   ID=002 #0x0001 LEN=0015
  Controller/PLCI/NCCI            = 0x104
  InfoNumber                      = 0x8002
  InfoElement                     = default

INFO_RESP                  ID=002 #0x0001 LEN=0012
  Controller/PLCI/NCCI            = 0x104

    -- ISDN4#02: info element CALL PROCEEDING
    -- chan_capi queue frame: [ TYPE: Control (4) SUBCLASS: Unknown control '15' (15) ] [ISDN4#02]
    -- CAPI/ISDN4#02/XXXXX-0 is proceeding passing it to IAX2/iaxmodem-1287
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x0003 NCCI=0x00000104
INFO_IND                   ID=002 #0x0003 LEN=0017
  Controller/PLCI/NCCI            = 0x104
  InfoNumber                      = 0x1e
  InfoElement                     = <82 88>

INFO_RESP                  ID=002 #0x0003 LEN=0012
  Controller/PLCI/NCCI            = 0x104

    -- ISDN4#02: info element PI 82 88
       > ISDN4#02: In-band information available
    -- chan_capi queue frame: [ TYPE: Control (4) SUBCLASS: Unknown control '14' (14) ] [ISDN4#02]
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x0004 NCCI=0x00000104
INFO_IND                   ID=002 #0x0004 LEN=0015
  Controller/PLCI/NCCI            = 0x104
  InfoNumber                      = 0x8001
  InfoElement                     = default

    -- CAPI/ISDN4#02/XXXXX-0 is making progress passing it to IAX2/iaxmodem-1287
INFO_RESP                  ID=002 #0x0004 LEN=0012
  Controller/PLCI/NCCI            = 0x104

    -- ISDN4#02: info element ALERTING
    -- chan_capi queue frame: [ TYPE: Control (4) SUBCLASS: Ringing (3) ] [ISDN4#02]
    -- CAPI/ISDN4#02/XXXXX-0 is ringing
       > chan_capi devicestate requested for ISDN4#02/XXXXX is 'In use'
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x0006 NCCI=0x00000104
INFO_IND                   ID=002 #0x0006 LEN=0020
  Controller/PLCI/NCCI            = 0x104
  InfoNumber                      = 0x29
  InfoElement                     = <0a 01 04 15 2b>

INFO_RESP                  ID=002 #0x0006 LEN=0012
  Controller/PLCI/NCCI            = 0x104

    -- ISDN4#02: info element Date/Time 10/01/04 21:43
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x0007 NCCI=0x00000104
INFO_IND                   ID=002 #0x0007 LEN=0015
  Controller/PLCI/NCCI            = 0x104
  InfoNumber                      = 0x8007
  InfoElement                     = default

INFO_RESP                  ID=002 #0x0007 LEN=0012
  Controller/PLCI/NCCI            = 0x104

    -- ISDN4#02: info element CONNECT
CAPI: ApplId=0x0002 Command=0x03 SubCommand=0x82 MsgNum=0x0009 NCCI=0x00000104
CONNECT_ACTIVE_IND         ID=002 #0x0009 LEN=0015
  Controller/PLCI/NCCI            = 0x104
  ConnectedNumber                 = default
  ConnectedSubaddress             = default
  LLC                             = default

CONNECT_ACTIVE_RESP        ID=002 #0x0009 LEN=0012
  Controller/PLCI/NCCI            = 0x104

CONNECT_B3_REQ             ID=002 #0x0016 LEN=0013
  Controller/PLCI/NCCI            = 0x104
  NCPI                            = default

    -- ISDN4#02: sent CONNECT_B3_REQ PLCI=0x104
CAPI: ApplId=0x0002 Command=0x82 SubCommand=0x81 MsgNum=0x0016 NCCI=0x00030104
CONNECT_B3_CONF            ID=002 #0x0016 LEN=0014
  Controller/PLCI/NCCI            = 0x30104
  Info                            = 0x0

CAPI: ApplId=0x0002 Command=0x83 SubCommand=0x82 MsgNum=0x000a NCCI=0x00030104
CONNECT_B3_ACTIVE_IND      ID=002 #0x000a LEN=0013
  Controller/PLCI/NCCI            = 0x30104
  NCPI                            = default

CONNECT_B3_ACTIVE_RESP     ID=002 #0x000a LEN=0012
  Controller/PLCI/NCCI            = 0x30104

    -- chan_capi queue frame: [ TYPE: Control (4) SUBCLASS: Answer (4) ] [ISDN4#02]
    -- CAPI/ISDN4#02/XXXXX-0 answered IAX2/iaxmodem-1287
       > chan_capi devicestate requested for ISDN4#02/XXXXX is 'In use'
  == ISDN4#02: Requested unknown Indication 20 for CAPI/ISDN4#02/XXXXX-0
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x000c NCCI=0x00000104
INFO_IND                   ID=002 #0x000c LEN=0037
  Controller/PLCI/NCCI            = 0x104
  InfoNumber                      = 0x1c
  InfoElement                     = <91 a1 13 02 02>Vo<02 01 22>0<0a a1 05>0<03 02 01 01 82 01 00>

INFO_RESP                  ID=002 #0x000c LEN=0012
  Controller/PLCI/NCCI            = 0x104

    -- ISDN4#02: info element FACILITY
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x000d NCCI=0x00000104
INFO_IND                   ID=002 #0x000d LEN=0019
  Controller/PLCI/NCCI            = 0x104
  InfoNumber                      = 0x4000
  InfoElement                     = <01 00 00 00>

INFO_RESP                  ID=002 #0x000d LEN=0012
  Controller/PLCI/NCCI            = 0x104

    -- ISDN4#02: info element CHARGE in UNITS
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x000e NCCI=0x00000104
INFO_IND                   ID=002 #0x000e LEN=0015
  Controller/PLCI/NCCI            = 0x104
  InfoNumber                      = 0x8062
  InfoElement                     = default

INFO_RESP                  ID=002 #0x000e LEN=0012
  Controller/PLCI/NCCI            = 0x104

    -- ISDN4#02: info element FACILITY
       > Saved useragent "snom-m3-SIP/02.02 (MAC=0004132ABB70; HW=1)" for peer 36

   -- ISDN4#02: info element DISCONNECT
    -- ISDN4#02: Disconnect case 1
    -- chan_capi queue frame: [ TYPE: Control (4) SUBCLASS: Hangup (1) ] [ISDN4#02]
  == ISDN4#02: CAPI Hangingup for PLCI=0x104 in state 2
    -- ISDN4#02: activehangingup (cause=16) for PLCI=0x104
DISCONNECT_B3_REQ          ID=002 #0x0943 LEN=0013
  Controller/PLCI/NCCI            = 0x30104
  NCPI                            = default

  == Spawn extension (fax, XXXXX, 1) exited non-zero on 'IAX2/iaxmodem-1287'
       > chan_capi devicestate requested for ISDN4#02/XXXXX is 'Not in use'
       > chan_capi devicestate requested for ISDN4#02/XXXXX is 'Not in use'
    -- Hungup 'IAX2/iaxmodem-1287'
CAPI: ApplId=0x0002 Command=0x84 SubCommand=0x81 MsgNum=0x0943 NCCI=0x00030104
DISCONNECT_B3_CONF         ID=002 #0x0943 LEN=0014
  Controller/PLCI/NCCI            = 0x30104
  Info                            = 0x0

CAPI: ApplId=0x0002 Command=0x84 SubCommand=0x82 MsgNum=0x0942 NCCI=0x00030104
DISCONNECT_B3_IND          ID=002 #0x0942 LEN=0015
  Controller/PLCI/NCCI            = 0x30104
  Reason_B3                       = 0x0
  NCPI                            = default

DISCONNECT_B3_RESP         ID=002 #0x0942 LEN=0012
  Controller/PLCI/NCCI            = 0x30104

DISCONNECT_REQ             ID=002 #0x0944 LEN=0013
  Controller/PLCI/NCCI            = 0x104
  AdditionalInfo                  = default

CAPI: ApplId=0x0002 Command=0x04 SubCommand=0x81 MsgNum=0x0944 NCCI=0x00000104
DISCONNECT_CONF            ID=002 #0x0944 LEN=0014
  Controller/PLCI/NCCI            = 0x104
  Info                            = 0x0

CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x0943 NCCI=0x00000104
INFO_IND                   ID=002 #0x0943 LEN=0015
  Controller/PLCI/NCCI            = 0x104
  InfoNumber                      = 0x805a
  InfoElement                     = default

INFO_RESP                  ID=002 #0x0943 LEN=0012
  Controller/PLCI/NCCI            = 0x104

    -- ISDN4#02: info element RELEASE COMPLETE
CAPI: ApplId=0x0002 Command=0x04 SubCommand=0x82 MsgNum=0x0945 NCCI=0x00000104
DISCONNECT_IND             ID=002 #0x0945 LEN=0014
  Controller/PLCI/NCCI            = 0x104
  Reason                          = 0x3490

DISCONNECT_RESP            ID=002 #0x0945 LEN=0012
  Controller/PLCI/NCCI            = 0x104

       > ISDN4#02: CAPI INFO 0x3490: Normal call clearing
  == ISDN4#02: Interface cleanup PLCI=0x104


extensions.conf ( relevanter teil )

Code: 
[fax]
;exten => _X.,1,Answer()
exten => _X.,1,Dial(CAPI/g1/${EXTEN},55)
;exten => _X.,1,Hangup()


[fax-in]
exten => MSN,1,Answer()
exten => MSN,2,Dial(IAX2/iaxmodem)
exten => MSN,3,Hangup()


vielleicht findet hier ja jemand den fehler :( ich hänge leider fest....
telefonie funktioniert ohne probleme... lediglich die Fax-geschichten ärgern mich :(

vielen Dank für eure Mühe das durchzulesen im vorraus :)

lg

Smiele
 
smiele schrieb:
Hallihallo, ich versuche zur Zeit eine Faxlösung mit asterisk und iaxmodem zu realisieren, allerdings hab ich dabei folgendes problem:

Ich nutze:
Debian mit 2.6.26-2-amd64 Kernel
Asterisk 1.6.0.20
chan_capi 1.1.4
Dialogic Diva 4BRI-8 PCIe v2 - PORT 1 SN: 3125
Zum Vergrößern anklicken....

Da frage ich mich doch, wenn du schon tolle Hardware hast, warum es so kompliziert machen.
Was spricht dagegen, den hylafax direkt mit capi zu verbinden?
Stichwort: apt-get install capi4hylafax
Ja, man kann mehrere Apps (die Werbung ist Schuld) auf der capi laufen lassen.
 
hm, das is eigendlich ne gute idee ( hab mit asterisk angefangen und mich an das buch gehalten :) ) aber das werd ich gleich mal austesten,

danke für den tip :)

edit:

habs getestet, mit capi4hylafax faxt die kiste jetzt tadellos, morgen mal gucken ob der asterisk da jetzt noch dazwischen ärger machen möchte :)
 
Zuletzt bearbeitet:
Um antworten zu können musst du eingeloggt sein.

Zurzeit aktive Besucher

Gesamt: 848 (Mitglieder: 43, Gäste: 805)

Neueste Beiträge

Statistik des Forums

Themen
246,276
Beiträge
2,249,326
Mitglieder
373,864
Neuestes Mitglied
Nero2014
Holen Sie sich 3CX - völlig kostenlos!
Verbinden Sie Ihr Team und Ihre Kunden Telefonie Livechat Videokonferenzen

Gehostet oder selbst-verwaltet. Für bis zu 10 Nutzer dauerhaft kostenlos. Keine Kreditkartendetails erforderlich. Ohne Risiko testen.

3CX
Für diese E-Mail-Adresse besteht bereits ein 3CX-Konto. Sie werden zum Kundenportal weitergeleitet, wo Sie sich anmelden oder Ihr Passwort zurücksetzen können, falls Sie dieses vergessen haben.
Ihr E-Mail-Adresse verifizieren

Ihr E-Mail-Adresse verifizieren

Wir haben Ihnen eine E-Mail geschickt. Klicken Sie auf die Schaltfläche im E-Mail-Text, um Ihre E-Mail-Adresse zu verifizieren – (Können Sie diese nicht finden können, dann überprüfen Sie Ihren Spam-Ordner).

IPPF im Überblick

Neueste Beiträge

Direktlinks Telefonanlage

Website-Sponsoren

3CX sponsor
KONTAKTIEREN SIE UNS BEI INTERESSE
| Style by ThemeHouse
XenPorta 2 PRO © Jason Axelrod of 8WAYRUN
Oben Unten
Zurück