.titleBar { margin-bottom: 5px!important; }

Asterisk mir qaudbri und AVM Fritz!X ISDN

Dieses Thema im Forum "Asterisk ISDN mit Bristuff (hfc, zaptel)" wurde erstellt von rar, 14 Dez. 2006.

  1. rar

    rar Neuer User

    Registriert seit:
    23 Sep. 2005
    Beiträge:
    2
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    Hallo,

    ich versuche gerade die Fritz!X ISDN hinter * zu betreiben. Leider waehlt er nicht raus. Ich habe ein wenig mit dem signalling gespielt und erhalte nun folgende Fehlermeldung:

    Code:
    Dec 14 15:35:31 NOTICE[5746] chan_zap.c: Alarm cleared on channel 1
    Dec 14 15:35:31 NOTICE[5746] chan_zap.c: Alarm cleared on channel 2
    Dec 14 15:35:31 NOTICE[5746] chan_zap.c: Alarm cleared on channel 4
    Dec 14 15:35:31 NOTICE[5746] chan_zap.c: Alarm cleared on channel 5
    Dec 14 15:35:31 WARNING[5742] chan_zap.c: No D-channels available!  Using Primary channel 3 as D-channel anyway!
    Dec 14 15:35:31 WARNING[5743] chan_zap.c: No D-channels available!  Using Primary channel 6 as D-channel anyway!
    Dec 14 15:35:35 DEBUG[5744] chan_zap.c: Found empty available channel 0/2
    Dec 14 15:35:35 DEBUG[5744] chan_zap.c: Enabled echo cancellation on channel 8
    Dec 14 15:35:35 WARNING[7231] cdr.c: CDR on channel 'Zap/8-1' not posted
    Dec 14 15:35:35 WARNING[7231] cdr.c: CDR on channel 'Zap/8-1' lacks end
    Dec 14 15:35:35 DEBUG[7231] pbx.c: Expression result is '1'
    Dec 14 15:35:36 WARNING[5746] chan_zap.c: Detected alarm on channel 1: Red Alarm
    Dec 14 15:35:36 WARNING[5746] chan_zap.c: Detected alarm on channel 2: Red Alarm
    Dec 14 15:35:36 WARNING[5746] chan_zap.c: Detected alarm on channel 4: Red Alarm
    Dec 14 15:35:36 WARNING[5746] chan_zap.c: Detected alarm on channel 5: Red Alarm
    Dec 14 15:35:36 WARNING[5742] chan_zap.c: No D-channels available!  Using Primary channel 3 as D-channel anyway!
    Dec 14 15:35:36 WARNING[5743] chan_zap.c: No D-channels available!  Using Primary channel 6 as D-channel anyway!
    Dec 14 15:35:36 NOTICE[5746] chan_zap.c: Alarm cleared on channel 1
    Dec 14 15:35:36 NOTICE[5746] chan_zap.c: Alarm cleared on channel 2
    Dec 14 15:35:36 NOTICE[5746] chan_zap.c: Alarm cleared on channel 4
    Dec 14 15:35:36 NOTICE[5746] chan_zap.c: Alarm cleared on channel 5
    Dec 14 15:35:36 WARNING[5742] chan_zap.c: No D-channels available!  Using Primary channel 3 as D-channel anyway!
    Dec 14 15:35:36 WARNING[5743] chan_zap.c: No D-channels available!  Using Primary channel 6 as D-channel anyway!
    Dec 14 15:35:41 DEBUG[7231] chan_zap.c: Set option AUDIO MODE, value: ON(1) on Zap/8-1
    Dec 14 15:35:41 DEBUG[7231] chan_zap.c: Hangup: channel: 8 index = 0, normal = 18, callwait = -1, thirdcall = -1
    Dec 14 15:35:41 DEBUG[7231] chan_zap.c: Not yet hungup...  Calling hangup once with icause, and clearing call
    Dec 14 15:35:41 DEBUG[7231] chan_zap.c: disabled echo cancellation on channel 8
    Dec 14 15:35:41 DEBUG[7231] chan_zap.c: Set option TDD MODE, value: OFF(0) on Zap/8-1
    Dec 14 15:35:41 DEBUG[7231] chan_zap.c: Updated conferencing on 8, with 0 conference users
    Dec 14 15:35:41 DEBUG[7231] chan_zap.c: Set option AUDIO MODE, value: OFF(0) on Zap/8-1
    
    
    Wie bereits erwaehnt hab ich bei der g1 mit dem signalling gespielt. Bei signaling=bri_net gibts garkeine Fehlermeldungen. Der Anruf wird einfach nicht beachtet.
    Hier meine aktuelle zapata.conf die auch den obigen log generiert:

    Code:
    [channels]
    language=de
    switchtype=euroisdn
    ;If you connect to a hicom PBX set your ISDN Numbering Plan Identifier to unknown.
    pridialplan=local
    prilocaldialplan=local
    
    ;signalling = fxs_ks
    ;rxwink=300
    
    usecallerid=yes
    hidecallerid=no
    callwaiting=yes
    usecallingpres=yes
    callwaitingcallerid=yes
    threewaycalling=yes
    transfer=yes
    cancallforward=yes
    callreturn=yes
    echocancel=yes
    echocancelwhenbridged=yes
    rxgain=0.0
    txgain=0.0
    nationalprefix = 0
    internationalprefix = 00
    faxdetect=incoming
    immediate=no
    ;callgroup=1
    ;pickupgroup=1
    
    signalling = bri_cpe
    
    group=0
    context=from-pstn
    channel => 1-2
    channel => 4-5
    
    ;-------------------------------------------------------------------
    ; p2mp NT mode (for connecting an ISDN PBX in point-to-point mode)
    ;signalling = bri_net_ptmp
    
    signalling = bri_net_ptmp
    
    context=from-internal
    ;context
    group = 1
    immediate=no
    usecallerid=yes
    hidecallerid=no
    callerid=asreceived
    
    ; S/T port 2-4 (first quadBRI Ports 3,4)
    channel => 7-8
    channel => 10-11
    
    faxdetect=both
    
    
    Vielleicht hat ja wer so etwas in Kombination laufen und hat einen Tip wo ich nachschauen oder drehen koennte damit die Fritz!X verneunftig funktioniert.

    gruss rar