backup via wireless on hd usb

[matteoraggi]

via browser I see folders on hd usb mounted, but I can't enter in them and I don't see files, via ftp I see only mounted folder and nothing in it and out of it, what I must to do normally read nand write files via FTP to do backup via wireless on my hd usb?

 

[Silent-Tears]

Without more on information noone can helf your.

Your should tell us which box you have, which firmware you use, and which mondifications you use in your freetz. And - of course - your freetz-revision (easy going if you attach your .config)

Surly you yave a syslog on your box and could paste us the content?

 

[matteoraggi]

answer

I have 7170 and my firmware is half in italian-english and german language..

 

[matteoraggi]

I have 7170 and my firmware is half in italian-english and german language..

where I can send in attachment my config file?

 

[McNetic]

When answering to posts, there is an option 'Anhänge verwalten' which allows you to attach files to the post (see attached image).

 

[matteoraggi]

09.06.08 11:45:35 The file sytem contained on the USB mass storage device 15 is not supported or the device has an invalid partition table. (device type: 04b8:082c)

09.06.08 11:45:34 Partition mounted in uStor00

09.06.08 11:44:59 Printer sharing at Port 9100 enabled.

09.06.08 11:44:56 USB device 015, class 'printer', plugged in

09.06.08 11:44:56 USB device 015, class 'storage', plugged in

09.06.08 00:35:22 uStor01 has been successfully removed

09.06.08 00:35:21 USB device 014 unplugged

08.06.08 16:52:23 Partition mounted in uStor01

08.06.08 16:52:15 USB device 014, class 'storage', plugged in

05.06.08 20:55:55 Printer sharing stopped.

05.06.08 20:55:53 USB device 013 unplugged

05.06.08 20:55:52 USB device 013 unplugged

05.06.08 20:55:52 USB device 013 unplugged

05.06.08 19:57:35 The file sytem contained on the USB mass storage device 13 is not supported or the device has an invalid partition table. (device type: 04b8:082c)

05.06.08 19:57:34 Partition mounted in uStor00

05.06.08 19:56:59 Printer sharing at Port 9100 enabled.

05.06.08 19:56:56 USB device 013, class 'printer', plugged in

05.06.08 19:56:56 USB device 013, class 'storage', plugged in

05.06.08 12:19:07 Printer sharing stopped.

05.06.08 12:19:06 Printer sharing stopped.

05.06.08 12:18:35 USB device 012 unplugged

05.06.08 12:18:35 USB device 012 unplugged

05.06.08 12:18:34 USB device 012 unplugged

05.06.08 12:18:34 USB device 012 unplugged

05.06.08 11:17:20 The file sytem contained on the USB mass storage device 12 is not supported or the device has an invalid partition table. (device type: 04b8:082c)

05.06.08 11:17:19 Partition mounted in uStor00

05.06.08 11:16:43 Printer sharing at Port 9100 enabled.

05.06.08 11:16:40 USB device 012, class 'storage', plugged in

05.06.08 11:16:40 USB device 012, class 'printer', plugged in

05.06.08 01:27:31 Printer sharing stopped.

05.06.08 01:27:31 Printer sharing stopped.

05.06.08 01:26:59 USB device 011 unplugged

05.06.08 01:26:59 USB device 011 unplugged

05.06.08 01:26:58 USB device 011 unplugged

05.06.08 01:26:58 USB device 011 unplugged

04.06.08 11:38:01 The file sytem contained on the USB mass storage device 11 is not supported or the device has an invalid partition table. (device type: 04b8:082c)

04.06.08 11:38:00 Partition mounted in uStor00

04.06.08 11:37:55 Printer sharing at Port 9100 enabled.

04.06.08 11:37:51 USB device 011, class 'printer', plugged in

04.06.08 11:37:51 USB device 011, class 'storage', plugged in

04.06.08 00:51:42 uStor01 has been successfully removed

04.06.08 00:51:39 USB device 010 unplugged

03.06.08 20:10:46 Partition mounted in uStor01

03.06.08 20:10:38 USB device 010, class 'storage', plugged in

03.06.08 19:10:52 Printer sharing stopped.

03.06.08 19:10:52 Printer sharing stopped.

03.06.08 19:10:20 USB device 009 unplugged

03.06.08 19:10:20 USB device 009 unplugged

03.06.08 19:10:20 USB device 009 unplugged

03.06.08 19:10:20 USB device 009 unplugged

03.06.08 19:05:55 The file sytem contained on the USB mass storage device 9 is not supported or the device has an invalid partition table. (device type: 04b8:082c)

03.06.08 19:05:54 Partition mounted in uStor00

03.06.08 19:05:19 Printer sharing at Port 9100 enabled.

03.06.08 19:05:16 USB device 009, class 'storage', plugged in

03.06.08 19:05:16 USB device 009, class 'printer', plugged in

Posting 2:

Without more on information noone can helf your.

Your should tell us which box you have, which firmware you use, and which mondifications you use in your freetz. And - of course - your freetz-revision (easy going if you attach your .config)

Surly you yave a syslog on your box and could paste us the content?

files in attachment
[Edit Novize: attachment deleted]

 

[doc456]

Hi,

is the USB-Stick/Disk formatted with Fat32?

 

[matteoraggi]

yes

yes, fat32

 

[olistudent]

Hi.
Perhaps you should delete above attachment. There's many private data in it!

Greets Oliver

 

[matteoraggi]

thank

thanks and sorry that I not founding the .config file and I don't know how to do that..

 

[Silent-Tears]

You will find your .config-file in your freetz-directory.