Cannot flash minimal image

[Caysho]

FRITZ!Box Fon WLAN 7270 v3 Australian Edition does not accept minimal image built in freetz-linux.
I get the following error:

The specified file does not contain any valid firmware for your device

I have attached logs and configuration.
Anhang anzeigen make_log.txt
Anhang anzeigen fritzbox_env.txt
Anhang anzeigen dot_config.txt

 

[colonia27]

Did you select the international fw version for your box? According to your config you used the german release.

 

[Caysho]

Language is set to "en" in the modifications, but I cannot see an option for international firmware.
Are you referring to "Override firmware source" ?

 

[colonia27]

The "en" selection should be enough.
If you tick "override..." this should be shown:

[*] Override firmware source                                                                          │ │  
  │ │            (@AVM/fritz.box/fritzbox.fon_wlan_7270_v1/x_misc/opensrc) Kernel site (NEW)                           │ │  
  │ │            (fritzbox7270-source-files-04.86.tar.gz) Kernel source (NEW)                                          │ │  
  │ │            (55a11af7dcfd617c39e75877045ab468) MD5 checksum for downloaded Kernel source file (NEW)               │ │  
  │ │            (@AVM//fritz.box/fritzbox.fon_wlan_7270_v3/firmware/english) Firmware site (NEW)                      │ │  
  │ │            ([B][COLOR=red]FRITZ.Box_Fon_WLAN_7270_v3.en-de-es-it-fr.74.04.90.image[/COLOR][/B]) Firmware source (NEW)                      │ │  
  │ │            (4d6f4fe7ad51e6496830da7fae036cca) MD5 checksum for downloaded Image (NEW)

 

[Caysho]

I am using freetz-linux with full updates.
I see:

  │ │[*] Override firmware source                                         │ │  
  │ │(@AVM/fritz.box/fritzbox.fon_wlan_7270/x_misc/opensrc) Kernel site (N│ │  
  │ │(fritzbox7270-source-files-04.80.tar.gz) Kernel source (NEW)         │ │  
  │ │(bcd49b28a54293e1481b8170b07245e0) MD5 checksum for downloaded Kernel│ │  
  │ │(ftp://service.avm.de/Downgrade/FRITZ!Box%20Fon%20WLAN%207270/FRITZ!B│ │  
  │ │(FRITZ.Box_Fon_WLAN_7270_v3.74.04.80.image) Firmware source (NEW)    │ │  
  │ │(12fb134d01f6bd5e99cdab2104184380) MD5 checksum for downloaded Image │ │

 

[colonia27]

hmm, are you using freetz-1.1.4 or freetz-trunk?
I think in 114 you cant change the language, but not sure.
I works for me when using the latest trunk revision

 

[Caysho]

freetz-linux-1.1.1 from sourceforge.
Is the freetz-linux version supposed to match the build environment version ?

 

[colonia27]

No, you got me wrong. The build environment is ok.
I was asking for the freetz version you're using. Which one did you check out? svn.....

This is how the main page of menuconfig should look like:

 

[Caysho]

Firmware language only allows de and the Compile image for "alien" hardware is not there.
I followed http://freetz.org/wiki/help/howtos/common/newbie
Looks like I did freetz-1.1.4

I will try it with trunk.

 

[colonia27]

Yeah, you cant select en firmware with 1.1.4. I just checked. So you have to use trunk and all is good
But where did you change to "en" as you said in #3 ??

 

[Caysho]

In the modifications, "en" can be selected:

  │ ┌─────────────────────────────────────────────────────────────────────┐ │  
  │ │         --- General --------------------------------                │ │  
  │ │             Hardware type (Fon WLAN 7270 (v3 only))  --->           │ │  
  │ │             Firmware language (de - deutsch)  --->                  │ │  
  │ │         [ ] Show advanced options                                   │ │  
  │ │         --- Mod ------------------------------------                │ │  
  │ │             Language (en - english)  --->                           │ │  
  │ │             Patches  --->                                           │ │  
  │ │             Package selection  --->                                 │ │  
  │ │             Advanced options  --->                                  │ │  
  │ │         ---                                                         │ │

 

[colonia27]

Oh yeah, sorry. Never used that befor, so didnt even see it.
Anyway, that has nothing to do with the firmware selection

 

[Caysho]

Thanks for your help - trunk works.