# Image Version
image_version: "P0S3-08-12-00"
# Emergency Proxy info
proxy_emergency: "80.75.55.109"
proxy_emergency_port: "5060"
# Backup Proxy info
proxy_backup: "80.75.55.109"
proxy_backup_port: "5060"
# Outbound Proxy info
outbound_proxy: "sip.a1.net"
outbound_proxy_port: "5060"
# NAT/Firewall Traversal
nat_enable: "1"
nat_received_processing: "1"
# Proxy Registration (0-disable (default), 1-enable)
proxy_register: "1"
# Phone Registration Expiration [1-3932100 sec] (Default - 3600)
timer_register_expires: "3600"
# Codec for media stream (g711ulaw (default), g711alaw, g729)
preferred_codec: "g711alaw"
# TOS bits in media stream [0-5] (Default - 5)
tos_media: "5"
# Enable VAD (0-disable (default), 1-enable)
enable_vad: "0"
# Allow for the bridge on a 3way call to join remaining parties upon hangup
cnf_join_enable: "1" ; 0-Disabled, 1-Enabled (default)
# Allow Transfer to be completed while target phone is still ringing
semi_attended_transfer: "1" ; 0-Disabled, 1-Enabled (default)
# Telnet Level (enable or disable the ability to telnet into this phone
telnet_level: "2" ; 0-Disabled (default), 1-Enabled, 2-Privileged
phone_password: "cisco"
phone_prompt: "Cisco SIP"
# wir erlauben im Default file keine priviligierten kommandos, weil wir hier auch kein individuelles phone-passwort setzen
# Inband DTMF Settings (0-disable, 1-enable (default))
dtmf_inband: "1"
# Out of band DTMF Settings (none-disable, avt-avt enable (default), avt_always - always avt )
dtmf_outofband: "avt"
# DTMF dB Level Settings (1-6dB down, 2-3db down, 3-nominal (default), 4-3db up, 5-6dB up)
dtmf_db_level: "3"
# SIP Timers
timer_t1: "500" ; Default 500 msec
timer_t2: "4000" ; Default 4 sec
sip_retx: "10" ; Default 11
sip_invite_retx: "6" ; Default 7
timer_invite_expires: "180" ; Default 180 sec
# Setting for Message speeddial to UOne box
messages_uri: "vm"
# Datumsformat
date_format: "D/M/Y"
# TFTP Phone Specific Configuration File Directory
tftp_cfg_dir: "./"
# Time Server (There are multiple values and configurations refer to Admin Guide for Specifics)
sntp_server: "192.53.103.104" ; SNTP Server IP Address
sntp_mode: unicast ; unicast, multicast, anycast, or directedbroadcast (default)
time_zone: CET ; Time Zone Phone is in
dst_offset: 1 ; Offset from Phone's time when DST is in effect
dst_start_month: April ; Month in which DST starts
dst_start_day: "" ; Day of month in which DST starts
dst_start_day_of_week: Sun ; Day of week in which DST starts
dst_start_week_of_month: 1 ; Week of month in which DST starts
dst_start_time: 02 ; Time of day in which DST starts
dst_stop_month: Oct ; Month in which DST stops
dst_stop_day: "" ; Day of month in which DST stops
dst_stop_day_of_week: Sunday ; Day of week in which DST stops
dst_stop_week_of_month: 8 ; Week of month in which DST stops 8=last week of month
dst_stop_time: 2 ; Time of day in which DST stops
dst_auto_adjust: 1 ; Enable(1-Default)/Disable(0) DST automatic adjustment
time_format_24hr: 1 ; Enable(1 - 24Hr Default)/Disable(0 - 12Hr)
# Do Not Disturb Control (0-off, 1-on, 2-off with no user control, 3-on with no user control)
dnd_control: "0" ; Default 0 (Do Not Disturb feature is off)
# Caller ID Blocking (0-disabled, 1-enabled, 2-disabled no user control, 3-enabled no user control)
callerid_blocking: "0" ; Default 0 (Disable sending all calls as anonymous)
# Anonymous Call Blocking (0-disbaled, 1-enabled, 2-disabled no user control, 3-enabled no user control)
anonymous_call_block: "0" ; Default 0 (Disable blocking of anonymous calls)
# Call Waiting (0-disabled, 1-enabled, 2-disabled with no user control, 3-enabled with no user control)
call_waiting: "1" ; Default 1 (Call Waiting enabled)
# DTMF AVT Payload (Dynamic payload range for AVT tones - 96-127)
dtmf_avt_payload: "101" ; Default 100
# XML file that specifies the dialplan desired
dial_template: "dialplan"
# Network Media Type (auto, full100, full10, half100, half10)
network_media_type: "auto"
#Autocompletion During Dial (0-off, 1-on [default])
autocomplete: "1"
#Time Format (0-12hr, 1-24hr [default])
time_format_24hr: "1"
####### New Parameters added in Release 4.0 #######
# URL for external Directory location
logo_url: "http://voip.funkfeuer.at/cisco/funkfeuer.bmp" ; URL for branding logo to be used on phone display
# put your own logo in the logo_url location; I include the 10-20.com one for reference in building your own
# HTTP Proxy Support
http_proxy_addr: "" ; Address of HTTP Proxy server
http_proxy_port: 80 ; Port of HTTP Proxy Server (80-default)
# Dynamic DNS/TFTP Support
dyn_dns_addr_1: "" ; restricted to dotted IP
dyn_dns_addr_2: "" ; restricted to dotted IP
#dyn_tftp_addr: "193.238.157.10" ; restricted to dotted IP
# The dynamic tftp server should be set to whatever your TFTP server is. This way, it
# keeps the tftp server setting even though you might be using DHCP (default behavior
# is to use the DHCP server as a tftp server, which is rarely correct.)
# Remote Party ID
#remote_party_id: 1 ; 0-Disabled (default), 1-Enabled
#spielt einen ton, wenn eine MWI (mailbox) nachricht eintrifft
stutter_msg_waiting: 1 ; 0 off(default, 1: on
# statistik ueber die qualitaet der leitung (default: 0/off)
# RTP-RxStat: Dur=6,Pkt=280,Oct=44800,LatePkt=0,TxLost=0,AvgJtr=0
# RTP-TxStat: Dur=6,Pkt=272,Oct=43520
call_stats: 1 ; (0-off (default), 1-on)
# benutzet transferiert gespraech durch auflegen (0: default, user muss "transfer" knopf drucken)
#transfer_onhook_enabled : 0
#call_hold_ringback : 0
#mwi_status : 1
#sync : "1"
#xml_card_dir : ""
#xml_card_file : "CARD.XML"
# englisch ist die derzeit einzige unterstuetzte sprache
#language: english
