DID bleibt leer bei eingehendem Anruf

_obelisk_ · 21 Feb 2008

Hi!
Ich habe mal wieder ein kleines problem mit meiner Eicon DIVA 4BRI und chan_capi.

Die 4 Ports der DIVA sind via DID an eine Octopus gekoppelt.

Bei einem eingehenden Anruf wird bei keinem der 4 Ports die Nummer übermittel. d.h. die DID bleibt leer!

woran kann das liegen?
Ist das ein TK Anlagen problem?

siehe capi debug:

Code:

M^[[Kovsrvasterisk*CLI> ^MCONNECT_IND ID=002 #0x031e LEN=0047
  Controller/PLCI/NCCI            = 0x202
  CIPValue                        = 0x10
  CalledPartyNumber               = default
  CallingPartyNumber              = <01 81>09xxxxx
  CalledPartySubaddress           = default
  CallingPartySubaddress          = default
  BC                              = <80 90 a3>
  LLC                             = default
  HLC                             = <91 81>
  AdditionalInfo
   BChannelinformation            = default
   Keypadfacility                 = default
   Useruserdata                   = default
   Facilitydataarray              = default
   SendingComplete                = default

^@    -- CONNECT_IND (PLCI=0x202,DID=,CID=09xxxxx,CIP=0x10,CONTROLLER=0x2)
^@  == ISDN2#02: setting format alaw - 0x8 (alaw)
^@  == ISDN2#02: Incoming call '09xxxxx' -> ''
^@    -- ISDN2#02: CAPI/ISDN2#02/-1: s matches in context capi-in for immediate
^@    -- ISDN2#02: CAPI/ISDN2#02/-1: s matches in context capi-in
^@  == Started pbx on channel CAPI/ISDN2#02/-1
^@INFO_IND ID=002 #0x031f LEN=0016
  Controller/PLCI/NCCI            = 0x202
  InfoNumber                      = 0x18
  InfoElement                     = <89>

^@INFO_RESP ID=002 #0x031f LEN=0012
  Controller/PLCI/NCCI            = 0x202

armincm · 21 Feb 2008

Ja, das hängt an der Anlage. In dem Log sieht man, was vom ISDN an Infos übermittelt wird. Und wenn da 'default' steht, heisst das, hier wurde nichts übermittelt. Eventuell kommt die Nummer später!? Wie sieht denn das Log weiter aus?

Armin

_obelisk_ · 22 Feb 2008

Hi,
mal wieder vielen dank für deine schnelle Antwort, armin!

Hier nochmal das komplette Log eines eingehende Anrufes (verbose 5/capi debug on):

Code:

CONNECT_IND ID=002 #0x0881 LEN=0047
  Controller/PLCI/NCCI            = 0x202
  CIPValue                        = 0x10
  CalledPartyNumber               = default
  CallingPartyNumber              = <01 81>0099xxxxxx
  CalledPartySubaddress           = default
  CallingPartySubaddress          = default
  BC                              = <80 90 a3>
  LLC                             = default
  HLC                             = <91 81>
  AdditionalInfo
   BChannelinformation            = default
   Keypadfacility                 = default
   Useruserdata                   = default
   Facilitydataarray              = default
   SendingComplete                = default

    -- CONNECT_IND (PLCI=0x202,DID=,CID=0099xxxxxx,CIP=0x10,CONTROLLER=0x2)
  == ISDN2#02: setting format alaw - 0x8 (alaw)
  == ISDN2#02: Incoming call '0099xxxxxx' -> ''
    -- ISDN2#02: CAPI/ISDN2#02/-3: s matches in context capi-in for immediate
    -- ISDN2#02: CAPI/ISDN2#02/-3: s matches in context capi-in
  == Started pbx on channel CAPI/ISDN2#02/-3
INFO_IND ID=002 #0x0882 LEN=0016
  Controller/PLCI/NCCI            = 0x202
  InfoNumber                      = 0x18
  InfoElement                     = <89>

INFO_RESP ID=002 #0x0882 LEN=0012
  Controller/PLCI/NCCI            = 0x202

    -- ISDN2#02: info element CHANNEL IDENTIFICATION 89
INFO_IND ID=002 #0x0883 LEN=0015
  Controller/PLCI/NCCI            = 0x202
  InfoNumber                      = 0x8005
  InfoElement                     = default

INFO_RESP ID=002 #0x0883 LEN=0012
  Controller/PLCI/NCCI            = 0x202

    -- ISDN2#02: info element SETUP
  == ISDN2#02: pbx already started on channel CAPI/ISDN2#02/-3
       > CAPI devicestate requested for ISDN2#02/ is 'Ringing'
    -- Executing [s@capi-in:1] Wait("CAPI/ISDN2#02/-3", "1") in new stack
    -- Executing [s@capi-in:2] Verbose("CAPI/ISDN2#02/-3", "2|Hotline Anruf von "" <0099xxxxxx> ISDN2 an s
") in new stack
  == Hotline Anruf von "" <0099xxxxxx> ISDN2 an s
    -- Executing [s@capi-in:3] Set("CAPI/ISDN2#02/-3", "ISDNPORT=ISDN2") in new stack
    -- Executing [s@capi-in:4] Verbose("CAPI/ISDN2#02/-3", "2|ISDN Port Nr. ISDN2") in new stack
  == ISDN Port Nr. ISDN2
    -- Executing [s@capi-in:5] GotoIf("CAPI/ISDN2#02/-3", "0?capi-in|9999|1") in new stack
    -- Executing [s@capi-in:6] Answer("CAPI/ISDN2#02/-3", "") in new stack
  == ISDN2#02: Answering for
CONNECT_RESP ID=002 #0x0881 LEN=0034
  Controller/PLCI/NCCI            = 0x202
  Reject                          = 0x0
  BProtocol
   B1protocol                     = 0x1
   B2protocol                     = 0x1
   B3protocol                     = 0x0
   B1configuration                = default
   B2configuration                = default
   B3configuration                = default
   GlobalConfiguration            = default
  ConnectedNumber                 = default
  ConnectedSubaddress             = default
  LLC                             = default
  AdditionalInfo
   BChannelinformation            = default
   Keypadfacility                 = default
   Useruserdata                   = default
   Facilitydataarray              = default
   SendingComplete                = default

    -- Executing [s@capi-in:7] Goto("CAPI/ISDN2#02/-3", "qu-hotline|start|1") in new stack
    -- Goto (qu-hotline,start,1)
    -- Executing [start@qu-hotline:1] GotoIfTime("CAPI/ISDN2#02/-3", "07:00-16:00|mon-thu|*|*?add-to-queue|1
") in new stack
    -- Executing [start@qu-hotline:2] GotoIfTime("CAPI/ISDN2#02/-3", "07:00-12:00|fri|*|*?add-to-queue|1
") in new stack
    -- Executing [start@qu-hotline:3] Wait("CAPI/ISDN2#02/-3", "1") in new stack
       > CAPI devicestate requested for ISDN2#02/ is 'In use'
CONNECT_ACTIVE_IND ID=002 #0x0885 LEN=0015
  Controller/PLCI/NCCI            = 0x202
  ConnectedNumber                 = default
  ConnectedSubaddress             = default
  LLC                             = default

CONNECT_ACTIVE_RESP ID=002 #0x0885 LEN=0012
  Controller/PLCI/NCCI            = 0x202

CONNECT_B3_IND ID=002 #0x0886 LEN=0013
  Controller/PLCI/NCCI            = 0x30202
  NCPI                            = default

CONNECT_B3_RESP ID=002 #0x0886 LEN=0015
  Controller/PLCI/NCCI            = 0x30202
  Reject                          = 0x0
  NCPI                            = default

CONNECT_B3_ACTIVE_IND ID=002 #0x0887 LEN=0013
  Controller/PLCI/NCCI            = 0x30202
  NCPI                            = default

CONNECT_B3_ACTIVE_RESP ID=002 #0x0887 LEN=0012
  Controller/PLCI/NCCI            = 0x30202

    -- Executing [start@qu-hotline:4] Playback("CAPI/ISDN2#02/-3", "willkommen") in new stack
    -- <CAPI/ISDN2#02/-3> Playing 'willkommen' (language 'de')
    -- Executing [start@qu-hotline:5] Goto("CAPI/ISDN2#02/-3", "q-notavail|1") in new stack
    -- Goto (qu-hotline,q-notavail,1)
    -- Executing [q-notavail@qu-hotline:1] Wait("CAPI/ISDN2#02/-3", "1") in new stack
    -- Executing [q-notavail@qu-hotline:2] Goto("CAPI/ISDN2#02/-3", "q-voicebox|1") in new stack
    -- Goto (qu-hotline,q-voicebox,1)
    -- Executing [q-voicebox@qu-hotline:1] Wait("CAPI/ISDN2#02/-3", "1") in new stack
INFO_IND ID=002 #0x09e5 LEN=0026
  Controller/PLCI/NCCI            = 0x202
  InfoNumber                      = 0x1c
  InfoElement                     = <91 a1 08 02 01 7e 02 01 22 05 00>

INFO_RESP ID=002 #0x09e5 LEN=0012
  Controller/PLCI/NCCI            = 0x202

    -- ISDN2#02: info element FACILITY
INFO_IND ID=002 #0x09e6 LEN=0017
  Controller/PLCI/NCCI            = 0x202
  InfoNumber                      = 0x1e
  InfoElement                     = <82 88>

INFO_RESP ID=002 #0x09e6 LEN=0012
  Controller/PLCI/NCCI            = 0x202

    -- ISDN2#02: info element PI 82 88
       > ISDN2#02: In-band information available
    -- CAPI queue frame: TYPE: Control (4) SUBCLASS: Unknown control '14' (14) ] [ISDN2#02
]
INFO_IND ID=002 #0x09e7 LEN=0017
  Controller/PLCI/NCCI            = 0x202
  InfoNumber                      = 0x8
  InfoElement                     = <80 90>

INFO_RESP ID=002 #0x09e7 LEN=0012
  Controller/PLCI/NCCI            = 0x202

    -- ISDN2#02: info element CAUSE 80 90
INFO_IND ID=002 #0x09e8 LEN=0015
  Controller/PLCI/NCCI            = 0x202
  InfoNumber                      = 0x8045
  InfoElement                     = default

INFO_RESP ID=002 #0x09e8 LEN=0012
  Controller/PLCI/NCCI            = 0x202

    -- ISDN2#02: info element DISCONNECT
    -- ISDN2#02: Disconnect case 3
    -- CAPI queue frame: TYPE: Control (4) SUBCLASS: Hangup (1) ] [ISDN2#02]
  == Spawn extension (qu-hotline, q-voicebox, 1) exited non-zero on 'CAPI/ISDN2#02/-3'
  == ISDN2#02: CAPI Hangingup for PLCI=0x202 in state 2
    -- ISDN2#02: activehangingup (cause=16) for PLCI=0x202
DISCONNECT_B3_REQ ID=002 #0x083d LEN=0013
  Controller/PLCI/NCCI            = 0x30202
  NCPI                            = default

       > CAPI devicestate requested for ISDN2#02/ is 'Not in use'
       > CAPI devicestate requested for ISDN2#02/ is 'Not in use'
DISCONNECT_B3_CONF ID=002 #0x083d LEN=0014
  Controller/PLCI/NCCI            = 0x30202
  Info                            = 0x0

DISCONNECT_B3_IND ID=002 #0x09ea LEN=0015
  Controller/PLCI/NCCI            = 0x30202
 Reason_B3                       = 0x0
  NCPI                            = default

DISCONNECT_B3_RESP ID=002 #0x09ea LEN=0012
  Controller/PLCI/NCCI            = 0x30202

DISCONNECT_REQ ID=002 #0x083e LEN=0013
  Controller/PLCI/NCCI            = 0x202
  AdditionalInfo                  = default

DISCONNECT_CONF ID=002 #0x083e LEN=0014
  Controller/PLCI/NCCI            = 0x202
  Info                            = 0x0

INFO_IND ID=002 #0x09eb LEN=0015
  Controller/PLCI/NCCI            = 0x202
  InfoNumber                      = 0x805a
  InfoElement                     = default

INFO_RESP ID=002 #0x09eb LEN=0012
  Controller/PLCI/NCCI            = 0x202

    -- ISDN2#02: info element RELEASE COMPLETE
DISCONNECT_IND ID=002 #0x09ed LEN=0014
  Controller/PLCI/NCCI            = 0x202
  Reason                          = 0x3490

DISCONNECT_RESP ID=002 #0x09ed LEN=0012
  Controller/PLCI/NCCI            = 0x202

       > ISDN2#02: CAPI INFO 0x3490: Normal call clearing
  == ISDN2#02: Interface cleanup PLCI=0x202

armincm · 22 Feb 2008

Okay, da kommt wirklich keine Nummer an. Das scheint an der Anlage zu liegen. Zur Sicherheit kannst du mit divactrl aber mal ein mlog erzeugen, da können wir dann auch den D-Kanal sehen .
Armin

_obelisk_ · 25 Feb 2008

OK, anbei das (fast) komplette d-kanal log.
den N-DATA Teil habe ich aufgrund der größe etwas gekürzt.
Ich hoffe der Auszug reicht ??

Auch hier sieht man im SETUP Abschnitt keine 'Called party number' !
Oder übersehe ich was??

Code:

Management Interface Trace/Log utility for EICON DIVA adapters
BUILD (107-28-Jun  6 2007-11:00:54)
Copyright (c) 1991-2007 Eicon Networks

===============================================================
[C:1] 67:0520:941 - D-X(004) 00 87 01 31
[C:1] 67:0520:945 - D-R(004) 02 87 01 31
[C:1] 67:0520:945 - D-X(004) 02 87 01 31
[C:1] 67:0520:961 - D-R(004) 00 87 01 31
[C:1] 67:0527:476 - D-R(040) 02 FF 03 08 01 02 05 04 03 80 90 A3 18 01 89 6C 0F 01 81 30 30 36 31 38 31 39 34 35 34 34 cont
[C:1] 67:0527:477 - MORE
[C:1] 67:0527:478 - SIG-R(037) 08 01 02 05 04 03 80 90 A3 18 01 89 6C 0F 01 81 30 30 36 31 38 31 39 34 35 34 34 30 30 7D 02 91 81 95 32 01 80
                     Q.931  CR02 SETUP
                            Bearer Capability 80 90 a3
                            Channel Id 89
                            Calling Party Number 01 81 '0090xxxxxxx'
                            HLC 91 81
                            SHIFT LOCK 05
                            5/32  80
[C:1] 67:0527:478 - SIG-S 0->6 e:805
[C:1] 67:0527:481 - CREATEID ok: context:1f assigned Id:5 freeIds=ea
[C:1] 67:0527:482 - alloc cr in use =4
[C:1] 67:0527:961 - SIG-EVENT FF00
[C:1] 67:0527:961 - SIG-x(007) 08 01 82 0D 18 01 89
                     Q.931  CR82 SETUP_ACK
                            Channel Id 89
[C:1] 67:0527:961 - SIG-S 6->25 e:ff00
[C:1] 67:0527:963 - D-X(011) 00 87 30 30 08 01 82 0D 18 01 89
[C:1] 67:0527:980 - D-R(004) 00 87 01 32
[C:1] 67:0528:484 - [1,0] dsp_assign 0016, 1, 160
[C:1] 67:0528:485 - [1,0] CAI[00] 16 00 00 00 a0 00
[C:1] 67:0528:485 - [1,0] Download 532 requested
[C:1] 67:0528:485 - SIG-X(004) 08 01 82 07
                     Q.931  CR82 CONN
[C:1] 67:0528:485 - [1,1] Switching DSP on 1 0 0:0 0:0
[C:1] 67:0528:488 - SIG-S 25->8 e:887
[C:1] 67:0528:488 - [10] N-ASSIGN REQ Id:NL_ID, Ch:00
[C:1] 67:0528:488 - CREATEID ok: context:3f assigned Id:8 freeIds=e9
[C:1] 67:0528:489 - B2Assign  01 -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
[C:1] 67:0528:489 - B2Assign  -- -- -- -- -- --
[C:1] 67:0528:489 - B2Assign 1 Sig=07 d_id=01
[C:1] 67:0528:489 - Assign L2:3 L3:4 free:3157/3200 l:160 d:4885 fc:4885/4385
[C:1] 67:0528:489 - Layer 2 Transparent
[C:1] 67:0528:490 - [11] N-RC=ASSIGN_OK Id:08, Ch:00
[C:1] 67:0528:493 - [12] N-CONNECT IND Id:08, Ch:0a
[C:1] 67:0528:494 - D-X(008) 00 87 32 30 08 01 82 07
[C:1] 67:0528:506 - [1,1] Starting task 532 00000001
[C:1] 67:0528:507 - [1,1] DSP startup
[C:1] 67:0528:509 - D-R(004) 00 87 01 34
[C:1] 67:0528:527 - B1-R(160) 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A cont
[C:1] 67:0528:528 - [13] N-DATA IND Id:08, Ch:0a
[C:1] 67:0528:529 - [14] N-RNR Id:08, Ch:0a
[C:1] 67:0528:541 - [15] N-DATA IND Id:08, Ch:0a
[C:1] 67:0528:543 - [16] N-RNR Id:08, Ch:0a
[C:1] 67:0528:547 - B1-R(160) 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A cont
[C:1] 67:0528:561 - [17] N-DATA IND Id:08, Ch:0a
[C:1] 67:0528:563 - [18] N-RNR Id:08, Ch:0a
[C:1] 67:0528:567 - B1-R(160) 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A cont
[C:1] 67:0528:581 - [19] N-DATA IND Id:08, Ch:0a
[C:1] 67:0528:582 - [1a] N-RNR Id:08, Ch:0a
[C:1] 67:0528:587 - B1-R(160) 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A cont
[C:1] 67:0528:591 - D-R(008) 02 87 30 34 08 01 02 0F
[C:1] 67:0528:591 - D-X(004) 02 87 01 32
[C:1] 67:0528:593 - SIG-R(004) 08 01 02 0F
                     Q.931  CR02 CONN_ACK
[C:1] 67:0528:593 - SIG-S 8->10 e:80f
[C:1] 67:0528:597 - [1b] N-CONNECT ACK REQ Id:08, Ch:0a
[C:1] 67:0528:597 - [1c] N-RC=OK Id:08, Ch:0a
[C:1] 67:0528:601 - [1d] N-DATA IND Id:08, Ch:0a
[C:1] 67:0528:603 - [1e] N-DATA IND Id:08, Ch:0a
[C:1] 67:0528:605 - [1f] N-DATA IND Id:08, Ch:0a
[C:1] 67:0528:607 - [20] N-DATA IND Id:08, Ch:0a
[C:1] 67:0528:607 - B1-R(160) 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A AB AB AB AB AB AB AB AB cont
[C:1] 67:0528:609 - [21] N-DATA IND Id:08, Ch:0a
...
[C:1] 67:0538:977 - [db] N-RC=OK Id:08, Ch:0a
[C:1] 67:0538:977 - B1-X(160) AA AB AA AA AB AA AA AA AA AA AA AB AA AB AA AA AB AA AB AB AA AA AB AA AB AA AB AB AB AB cont
[C:1] 67:0538:984 - D-R(029) 02 87 32 34 08 01 02 45 08 02 80 90 1C 0B 91 A1 08 02 01 7E 02 01 22 05 00 1E 02 82 88
[C:1] 67:0538:985 - D-X(004) 02 87 01 34
[C:1] 67:0538:986 - SIG-R(025) 08 01 02 45 08 02 80 90 1C 0B 91 A1 08 02 01 7E 02 01 22 05 00 1E 02 82 88
                     Q.931  CR02 DISC
                            Cause 80 90 'Normal call clearing'
                            Facility 91 a1 08 02 01 7e 02 01 22 05 00
                            Progress Indicator 82 88
[C:1] 67:0538:986 - SIG-S 10->12 e:845
[C:1] 67:0538:987 - B1-R(160) 90 CC 9C 5C DC FC 6C 80 6A 81 6D FD DD 5D 9D CD 91 29 48 50 4C 1C 5C DC 3C EC 20 FF 41 8D cont
[C:1] 67:0538:989 - [dc] N-DATA IND Id:08, Ch:0a
[C:1] 67:0538:991 - [dd] N-DATA REQ Id:08, Ch:0a
[C:1] 67:0538:991 - [de] N-RC=OK Id:08, Ch:0a
[C:1] 67:0538:991 - B1-X(160) AB AB AA AA AA AB AB AA AB AB AA AB AA AB AB AB AB AA AB AB AA AB AB AA AB AB AB AA AB AB cont
[C:1] 67:0538:993 - [df] N-DISC REQ Id:08, Ch:0a
[C:1] 67:0538:993 - [e0] N-RC=OK Id:08, Ch:0a
[C:1] 67:0538:996 - [1,1] TX FLUSH request
[C:1] 67:0539:007 - B1-R(160) 71 CD 9D 5D DD FD 8D C1 73 E0 EC 3C DC 5C 9C 4C D0 88 89 D1 4D 9D 5D DD 3D ED E1 72 C0 8C cont
[C:1] 67:0539:008 - [e1] N-DATA IND Id:08, Ch:0a
[C:1] 67:0539:017 - [1,1] TX FLUSH indication
[C:1] 67:0539:018 - [e2] N-DISC ACK IND Id:08, Ch:0a
[C:1] 67:0539:020 - SIG-X(008) 08 01 82 45 08 02 80 90
                     Q.931  CR82 DISC
                            Cause 80 90 'Normal call clearing'
[C:1] 67:0539:020 - SIG-x(004) 08 01 82 4D
                     Q.931  CR82 REL
[C:1] 67:0539:020 - [1,1] Switching DSP off 1
[C:1] 67:0539:020 - [1,1] KERNEL[DM2e90] ce1f 5834 bad1 a916 670d c9ed abb4 dafa
[C:1] 67:0539:020 - [1,1] KERNEL[DM2e98] 8ed5 0bf5 2811 af55 6a2d 9d25 a0fc 97d3
[C:1] 67:0539:020 - [1,1] DSP TX idle/aborted: 11/0, RX overflow: 0+0
[C:1] 67:0539:020 - [1,1] DSP Sample overruns: 0, Reboots: 0, SIG: 0/0/0
[C:1] 67:0539:020 - [1,1] DSP RX aborted/CRC: 0/0
[C:1] 67:0539:020 - [1,1] DSP Bulk underrun/overlength N/N, Simplif 0+0
[C:1] 67:0539:021 - [1,1] DSP Total: 9, idle/aborted: 145/0, overflow: 0+0
[C:1] 67:0539:021 - [1,1] DSP Total sample overruns: 0, Reboots: 0, SIG: 0/0
[C:1] 67:0539:021 - [1,1] DSP Total frames TX: 3945, RX: 4969, RX aborted/CRC: 0/0
[C:1] 67:0539:021 - [1,1] DSP Total Bulk underrun/overlength 0/0, Simplif 0+0
[C:1] 67:0539:021 - [1,1] TX NULL 0, SW sequence 0
[C:1] 67:0539:021 - [1,1] Task stopped
[C:1] 67:0539:021 - SIG-S 12->19 e:8c5
[C:1] 67:0539:023 - D-X(008) 00 87 34 34 08 01 82 4D
[C:1] 67:0539:039 - D-R(004) 00 87 01 36
[C:1] 67:0539:107 - D-R(008) 02 87 34 36 08 01 02 5A
[C:1] 67:0539:108 - D-X(004) 02 87 01 36
[C:1] 67:0539:109 - SIG-R(004) 08 01 02 5A
                     Q.931  CR02 REL_COM
[C:1] 67:0539:109 - [1,0] dsp_release
[C:1] 67:0539:111 - SIG-S 19->0 e:85a
[C:1] 67:0539:114 - [e3] N-REMOVE REQ Id:08, Ch:00
[C:1] 67:0539:114 - B2Release  01 07 -- -- -- -- -- -- -- -- -- -- -- -- -- --
[C:1] 67:0539:114 - B2Release  -- -- -- -- -- --
[C:1] 67:0539:115 - B2Release 1, free:3193, nomsg:0
[C:1] 67:0539:115 - Release - Layer 2 Transparent
[C:1] 67:0539:115 - DELETEID ok: deleted Id:8 freeIds=e9
[C:1] 67:0539:115 - [e4] N-RC=OK Id:08, Ch:00
[C:1] 67:0539:117 - free cr in use =3
[C:1] 67:0539:117 - DELETEID ok: deleted Id:7 freeIds=ea

armincm · 26 Feb 2008

_obelisk_ schrieb:
Auch hier sieht man im SETUP Abschnitt keine 'Called party number' !
Oder übersehe ich was??

Nein, das ist der Beweis. Im SETUP fehlt die Ursprungsnummer. D.h. also, die Anlage sendet sie nicht.

Armin

DID bleibt leer bei eingehendem Anruf

_obelisk_

Neuer User

armincm

Aktives Mitglied

_obelisk_

Neuer User

armincm

Aktives Mitglied

_obelisk_

Neuer User

armincm

Aktives Mitglied

Neueste Beiträge

Kategorien

Wissenswertes

Statistik des Forums

3CX jetzt einen Monat kostenlos testen

Unternehmen

Lösungen

Nützliche Links

Mehr erfahren