Zunächst mal ein ganz großes Lob an Euch alle, seit 3 Tagen läuft Asterisk mit der in der Signatur angegebenen Konfiguration erfolgreich im Produktivbetrieb! Das hätte ich ohne das Forum nie hinbekommen!!!
Nun beschäftigt mich das mehrfache Ein- und Ausschalten des Echo cancellers bei einer Faxverbindung über eine Bridge.
Der folgende Mitschnitt eines (erfolgreich) eingehenden Faxes zeigt, dass da mehrfach aktviert und deaktiviert wird. Ist das in Ordnung so?
Es gibt ja die Möglichkeit, das "manuell" über capicommand abzuschalten:
Der Aufbau bei uns ist, dass der eingehehende Anruf von der TE-Karte angenommen wird, anhand der Durchwahlinformation an die NT-Karte weitergegeben wird (Bridge) und von dort über unseren internen So an die ISDN-Karte im Faxserver vermittelt wird.
Wird das eingehende Fax dann von einer non-CAPI application bearbeitet? Die ISDN-Karte im Faxserver wird auch über CAPI angesprochen, aber das tut dann wohl nichts mehr zur Sache, weil externer Rechner, richtig?
Also nochmals meine Frage(n):
- Hilft es (oder ist es gar egal?), wenn ich echocancel abschalte, wenn der eingehende Anruf ein Fax ist?
- Wäre dieses Abschalten nur für die eine Verbindung gültig, oder schalte ich den Echo canceller dann für immer ab?
Hier noch der Mitschnitt der Faxverbindung:
Nun beschäftigt mich das mehrfache Ein- und Ausschalten des Echo cancellers bei einer Faxverbindung über eine Bridge.
Der folgende Mitschnitt eines (erfolgreich) eingehenden Faxes zeigt, dass da mehrfach aktviert und deaktiviert wird. Ist das in Ordnung so?
Es gibt ja die Möglichkeit, das "manuell" über capicommand abzuschalten:
Enable or disable echo-cancel provided by CAPI driver/hardware. You may need to disable echo-cancel when e.g. data/fax transmission handled by non-CAPI application.
Example:
exten => s,1,capicommand(echocancel|yes)
or
exten => s,1,capicommand(echocancel|no)
Der Aufbau bei uns ist, dass der eingehehende Anruf von der TE-Karte angenommen wird, anhand der Durchwahlinformation an die NT-Karte weitergegeben wird (Bridge) und von dort über unseren internen So an die ISDN-Karte im Faxserver vermittelt wird.
Wird das eingehende Fax dann von einer non-CAPI application bearbeitet? Die ISDN-Karte im Faxserver wird auch über CAPI angesprochen, aber das tut dann wohl nichts mehr zur Sache, weil externer Rechner, richtig?
Also nochmals meine Frage(n):
- Hilft es (oder ist es gar egal?), wenn ich echocancel abschalte, wenn der eingehende Anruf ein Fax ist?
- Wäre dieses Abschalten nur für die eine Verbindung gültig, oder schalte ich den Echo canceller dann für immer ab?
Hier noch der Mitschnitt der Faxverbindung:
Code:
CONNECT_IND ID=001 #0x1dfd LEN=0047
Controller/PLCI/NCCI = 0x102
CIPValue = 0x4
CalledPartyNumber = <81>280
CallingPartyNumber = <21 80>07021xxxxxx
CalledPartySubaddress = default
CallingPartySubaddress = default
BC = <90 90 a3>
LLC = default
HLC = default
AdditionalInfo
BChannelinformation = default
Keypadfacility = default
Useruserdata = default
Facilitydataarray = default
SendingComplete = default
-- CONNECT_IND (PLCI=0x102,DID=280,CID=07021xxxxxx,CIP=0x4,CONTROLLER=0x2)
> ISDN_TE2#02: msn='*' DNID='280' DID
== ISDN_TE2#02: setting format alaw - 0x8 (alaw)
== ISDN_TE2#02: Incoming call '07021xxxxxx' -> '280'
INFO_IND ID=001 #0x1dfe LEN=0019
Controller/PLCI/NCCI = 0x102
InfoNumber = 0x70
InfoElement = <81>280
INFO_RESP ID=001 #0x1dfe LEN=0012
Controller/PLCI/NCCI = 0x102
-- ISDN_TE2#02: info element CALLED PARTY NUMBER
-- ISDN_TE2#02: Updated channel name: CAPI/ISDN_TE2/280-307
-- ISDN_TE2#02: CAPI/ISDN_TE2/280-307: 280 matches in context from-capi
> CAPI devicestate requested for ISDN_TE2/280
== Started pbx on channel CAPI/ISDN_TE2/280-307
INFO_IND ID=001 #0x1dff LEN=0016
Controller/PLCI/NCCI = 0x102
InfoNumber = 0x18
InfoElement = <89>
INFO_RESP ID=001 #0x1dff LEN=0012
Controller/PLCI/NCCI = 0x102
-- ISDN_TE2#02: info element CHANNEL IDENTIFICATION 89
INFO_IND ID=001 #0x1e00 LEN=0015
Controller/PLCI/NCCI = 0x102
InfoNumber = 0x8005
InfoElement = default
INFO_RESP ID=001 #0x1e00 LEN=0012
Controller/PLCI/NCCI = 0x102
-- ISDN_TE2#02: info element SETUP
-- Executing Macro("CAPI/ISDN_TE2/280-307", "incomingfax|280") in new stack
-- Executing NoCDR("CAPI/ISDN_TE2/280-307", "") in new stack
Nov 24 14:58:40 WARNING[16600]: cdr.c:443 ast_cdr_free: CDR on channel 'CAPI/ISDN_TE2/280-307' not posted
Nov 24 14:58:40 WARNING[16600]: cdr.c:445 ast_cdr_free: CDR on channel 'CAPI/ISDN_TE2/280-307' lacks end
-- Executing Dial("CAPI/ISDN_TE2/280-307", "CAPI/g2/07021xxxxxx:280/b") in new stack
> data = g2/07021xxxxxx:280/b format=8
> parsed dialstring: 'g2' '07021xxxxxx' '280' 'b'
> capi request group = 4
== ISDN_NT#02: setting format alaw - 0x8 (alaw)
> CAPI devicestate requested for ISDN_NT/280
> parsed dialstring: 'g2' '07021xxxxxx' '280' 'b'
== ISDN_NT#02: Call CAPI/ISDN_NT/280-308 with B3 (pres=0x00, ton=0x21)
CONNECT_REQ ID=001 #0x4e8f LEN=0057
Controller/PLCI/NCCI = 0x3
CIPValue = 0x4
CalledPartyNumber = <80>280
CallingPartyNumber = <21 80>07021xxxxxx
CalledPartySubaddress = default
CallingPartySubaddress = default
BProtocol
B1protocol = 0x1
B2protocol = 0x1
B3protocol = 0x0
B1configuration = default
B2configuration = default
B3configuration = default
GlobalConfiguration = default
BC = default
LLC = default
HLC = default
AdditionalInfo
BChannelinformation = <00 00>
Keypadfacility = default
Useruserdata = default
Facilitydataarray = default
SendingComplete = default
-- Called g2/07021xxxxxx:280/b
CONNECT_CONF ID=001 #0x4e8f LEN=0014
Controller/PLCI/NCCI = 0x203
Info = 0x0
-- ISDN_NT#02: received CONNECT_CONF PLCI = 0x203
> CAPI devicestate requested for ISDN_NT/280
INFO_IND ID=001 #0x1e01 LEN=0016
Controller/PLCI/NCCI = 0x203
InfoNumber = 0x18
InfoElement = <89>
INFO_RESP ID=001 #0x1e01 LEN=0012
Controller/PLCI/NCCI = 0x203
-- ISDN_NT#02: info element CHANNEL IDENTIFICATION 89
INFO_IND ID=001 #0x1e02 LEN=0015
Controller/PLCI/NCCI = 0x203
InfoNumber = 0x8001
InfoElement = default
INFO_RESP ID=001 #0x1e02 LEN=0012
Controller/PLCI/NCCI = 0x203
-- ISDN_NT#02: info element ALERTING
CONNECT_B3_REQ ID=001 #0x4e90 LEN=0013
Controller/PLCI/NCCI = 0x203
NCPI = default
-- ISDN_NT#02: sent CONNECT_B3_REQ PLCI=0x203
-- CAPI queue frame: [ TYPE: Control (4) SUBCLASS: Unknown control '14' (14) ] [ISDN_NT#02]
-- CAPI queue frame: [ TYPE: Control (4) SUBCLASS: Ringing (3) ] [ISDN_NT#02]
> CAPI devicestate requested for ISDN_NT/280
-- CAPI/ISDN_NT/280-308 is making progress passing it to CAPI/ISDN_TE2/280-307
== ISDN_TE2#02: Requested PROGRESS-Indication for CAPI/ISDN_TE2/280-307
-- CAPI/ISDN_NT/280-308 is ringing
== ISDN_TE2#02: Requested RINGING-Indication for CAPI/ISDN_TE2/280-307
ALERT_REQ ID=001 #0x4e91 LEN=0018
Controller/PLCI/NCCI = 0x102
AdditionalInfo
BChannelinformation = default
Keypadfacility = default
Useruserdata = default
Facilitydataarray = default
SendingComplete = default
ALERT_CONF ID=001 #0x4e91 LEN=0014
Controller/PLCI/NCCI = 0x102
Info = 0x0
CONNECT_B3_CONF ID=001 #0x4e90 LEN=0014
Controller/PLCI/NCCI = 0x60203
Info = 0x0
CONNECT_B3_ACTIVE_IND ID=001 #0x1e04 LEN=0013
Controller/PLCI/NCCI = 0x60203
NCPI = default
CONNECT_B3_ACTIVE_RESP ID=001 #0x1e04 LEN=0012
Controller/PLCI/NCCI = 0x60203
== ISDN_NT#02: Setting up echo canceller (PLCI=0x203, function=1, options=4, tail=0)
FACILITY_REQ ID=001 #0x4e92 LEN=0024
Controller/PLCI/NCCI = 0x203
FacilitySelector = 0x8
FacilityRequestParameter = <01 00 06 04 00 00 00 00 00>
== ISDN_NT#02: Setting up DTMF detector (PLCI=0x203, flag=1)
FACILITY_REQ ID=001 #0x4e93 LEN=0023
Controller/PLCI/NCCI = 0x203
FacilitySelector = 0x1
FacilityRequestParameter = <01 00>P<00>P<00 00 00>
FACILITY_CONF ID=001 #0x4e92 LEN=0022
Controller/PLCI/NCCI = 0x203
Info = 0x0
FacilitySelector = 0x8
FacilityConfirmationParameter = <01 00 02 00 00>
-- ISDN_NT#02: Echo canceller successfully set up (PLCI=0x203)
FACILITY_CONF ID=001 #0x4e93 LEN=0019
Controller/PLCI/NCCI = 0x203
Info = 0x0
FacilitySelector = 0x1
FacilityConfirmationParameter = <00 00>
> ISDN_NT#02: DTMF conf(PLCI=0x203)
INFO_IND ID=001 #0x1e19 LEN=0021
Controller/PLCI/NCCI = 0x203
InfoNumber = 0x28
InfoElement = LINK<3d>0
INFO_RESP ID=001 #0x1e19 LEN=0012
Controller/PLCI/NCCI = 0x203
-- ISDN_NT#02: info element DSP
INFO_IND ID=001 #0x1e1a LEN=0015
Controller/PLCI/NCCI = 0x203
InfoNumber = 0x8007
InfoElement = default
INFO_RESP ID=001 #0x1e1a LEN=0012
Controller/PLCI/NCCI = 0x203
-- ISDN_NT#02: info element CONNECT
CONNECT_ACTIVE_IND ID=001 #0x1e1c LEN=0015
Controller/PLCI/NCCI = 0x203
ConnectedNumber = default
ConnectedSubaddress = default
LLC = default
CONNECT_ACTIVE_RESP ID=001 #0x1e1c LEN=0012
Controller/PLCI/NCCI = 0x203
-- CAPI queue frame: [ TYPE: Control (4) SUBCLASS: Answer (4) ] [ISDN_NT#02]
-- CAPI/ISDN_NT/280-308 answered CAPI/ISDN_TE2/280-307
> CAPI devicestate requested for ISDN_NT/280
== ISDN_TE2#02: Requested Indication-STOP for CAPI/ISDN_TE2/280-307
== ISDN_TE2#02: Answering for 280
CONNECT_RESP ID=001 #0x1dfd LEN=0039
Controller/PLCI/NCCI = 0x102
Reject = 0x0
BProtocol
B1protocol = 0x1
B2protocol = 0x1
B3protocol = 0x0
B1configuration = default
B2configuration = default
B3configuration = default
GlobalConfiguration = default
ConnectedNumber = <00 80>280
ConnectedSubaddress = default
LLC = default
AdditionalInfo
BChannelinformation = default
Keypadfacility = default
Useruserdata = default
Facilitydataarray = default
SendingComplete = default
-- Attempting native bridge of CAPI/ISDN_TE2/280-307 and CAPI/ISDN_NT/280-308
> CAPI devicestate requested for ISDN_TE2/280
== ISDN_TE2#02:ISDN_NT#02 Requested native bridge for CAPI/ISDN_TE2/280-307 and CAPI/ISDN_NT/280-308
ISDN_TE2#02: wait for b3 up.
INFO_IND ID=001 #0x1e22 LEN=0020
Controller/PLCI/NCCI = 0x102
InfoNumber = 0x29
InfoElement = <06 0b 18 0e 3a>
INFO_RESP ID=001 #0x1e22 LEN=0012
Controller/PLCI/NCCI = 0x102
-- ISDN_TE2#02: info element Date/Time 06/11/24 14:58
INFO_IND ID=001 #0x1e23 LEN=0015
Controller/PLCI/NCCI = 0x102
InfoNumber = 0x800f
InfoElement = default
INFO_RESP ID=001 #0x1e23 LEN=0012
Controller/PLCI/NCCI = 0x102
-- ISDN_TE2#02: info element CONNECT ACK
CONNECT_ACTIVE_IND ID=001 #0x1e25 LEN=0015
Controller/PLCI/NCCI = 0x102
ConnectedNumber = default
ConnectedSubaddress = default
LLC = default
CONNECT_ACTIVE_RESP ID=001 #0x1e25 LEN=0012
Controller/PLCI/NCCI = 0x102
CONNECT_B3_IND ID=001 #0x1e26 LEN=0013
Controller/PLCI/NCCI = 0x60102
NCPI = default
CONNECT_B3_RESP ID=001 #0x1e26 LEN=0015
Controller/PLCI/NCCI = 0x60102
Reject = 0x0
NCPI = default
CONNECT_B3_ACTIVE_IND ID=001 #0x1e27 LEN=0013
Controller/PLCI/NCCI = 0x60102
NCPI = default
CONNECT_B3_ACTIVE_RESP ID=001 #0x1e27 LEN=0012
Controller/PLCI/NCCI = 0x60102
== ISDN_TE2#02: Setting up echo canceller (PLCI=0x102, function=1, options=4, tail=0)
FACILITY_REQ ID=001 #0x4e94 LEN=0024
Controller/PLCI/NCCI = 0x102
FacilitySelector = 0x8
FacilityRequestParameter = <01 00 06 04 00 00 00 00 00>
== ISDN_TE2#02: Setting up DTMF detector (PLCI=0x102, flag=1)
FACILITY_REQ ID=001 #0x4e95 LEN=0023
Controller/PLCI/NCCI = 0x102
FacilitySelector = 0x1
FacilityRequestParameter = <01 00>P<00>P<00 00 00>
ISDN_TE2#02: found and signal for b3 up state.
ISDN_TE2#02: cond signal received for b3 up.
== ISDN_TE2#02: Setting up DTMF detector (PLCI=0x102, flag=0)
FACILITY_REQ ID=001 #0x4e96 LEN=0023
Controller/PLCI/NCCI = 0x102
FacilitySelector = 0x1
FacilityRequestParameter = <02 00>P<00>P<00 00 00>
== ISDN_NT#02: Setting up DTMF detector (PLCI=0x203, flag=0)
FACILITY_REQ ID=001 #0x4e97 LEN=0023
Controller/PLCI/NCCI = 0x203
FacilitySelector = 0x1
FacilityRequestParameter = <02 00>P<00>P<00 00 00>
== ISDN_TE2#02: Setting up echo canceller (PLCI=0x102, function=2, options=4, tail=0)
FACILITY_REQ ID=001 #0x4e98 LEN=0024
Controller/PLCI/NCCI = 0x102
FacilitySelector = 0x8
FacilityRequestParameter = <02 00 00 00 00 00 00 00 00>
== ISDN_NT#02: Setting up echo canceller (PLCI=0x203, function=2, options=4, tail=0)
FACILITY_REQ ID=001 #0x4e99 LEN=0024
Controller/PLCI/NCCI = 0x203
FacilitySelector = 0x8
FacilityRequestParameter = <02 00 00 00 00 00 00 00 00>
FACILITY_REQ ID=001 #0x4e9a LEN=0032
Controller/PLCI/NCCI = 0x102
FacilitySelector = 0x5
FacilityRequestParameter = <01 00 0e 00 00 00 00 09 08 03 02 00 00 03 00 00 00>
FACILITY_CONF ID=001 #0x4e97 LEN=0019
Controller/PLCI/NCCI = 0x203
Info = 0x0
FacilitySelector = 0x1
FacilityConfirmationParameter = <00 00>
> ISDN_NT#02: DTMF conf(PLCI=0x203)
FACILITY_CONF ID=001 #0x4e99 LEN=0022
Controller/PLCI/NCCI = 0x203
Info = 0x0
FacilitySelector = 0x8
FacilityConfirmationParameter = <02 00 02 00 00>
-- ISDN_NT#02: Echo canceller successfully disabled (PLCI=0x203)
FACILITY_CONF ID=001 #0x4e94 LEN=0022
Controller/PLCI/NCCI = 0x102
Info = 0x0
FacilitySelector = 0x8
FacilityConfirmationParameter = <01 00 02 00 00>
-- ISDN_TE2#02: Echo canceller successfully set up (PLCI=0x102)
FACILITY_CONF ID=001 #0x4e95 LEN=0019
Controller/PLCI/NCCI = 0x102
Info = 0x0
FacilitySelector = 0x1
FacilityConfirmationParameter = <00 00>
> ISDN_TE2#02: DTMF conf(PLCI=0x102)
FACILITY_CONF ID=001 #0x4e96 LEN=0019
Controller/PLCI/NCCI = 0x102
Info = 0x0
FacilitySelector = 0x1
FacilityConfirmationParameter = <00 00>
> ISDN_TE2#02: DTMF conf(PLCI=0x102)
FACILITY_CONF ID=001 #0x4e98 LEN=0022
Controller/PLCI/NCCI = 0x102
Info = 0x0
FacilitySelector = 0x8
FacilityConfirmationParameter = <02 00 02 00 00>
-- ISDN_TE2#02: Echo canceller successfully disabled (PLCI=0x102)
FACILITY_CONF ID=001 #0x4e9a LEN=0030
Controller/PLCI/NCCI = 0x102
Info = 0x0
FacilitySelector = 0x5
FacilityConfirmationParameter = <01 00 0a 00 00 07 06 03 02 00 00 00 00>
FACILITY_IND ID=001 #0x1e28 LEN=0022
Controller/PLCI/NCCI = 0x102
FacilitySelector = 0x5
FacilityIndicationParameter = <01 00 04 03 02 00 00>
FACILITY_RESP ID=001 #0x1e28 LEN=0022
Controller/PLCI/NCCI = 0x102
FacilitySelector = 0x5
FacilityResponseParameters = <01 00 04 03 02 00 00>
-- ISDN_TE2#02: Line Interconnect activated
INFO_IND ID=001 #0x1e2b LEN=0017
Controller/PLCI/NCCI = 0x203
InfoNumber = 0x8
InfoElement = <80 90>
INFO_RESP ID=001 #0x1e2b LEN=0012
Controller/PLCI/NCCI = 0x203
-- ISDN_NT#02: info element CAUSE 80 90
INFO_IND ID=001 #0x1e2c LEN=0015
Controller/PLCI/NCCI = 0x203
InfoNumber = 0x8045
InfoElement = default
INFO_RESP ID=001 #0x1e2c LEN=0012
Controller/PLCI/NCCI = 0x203
-- ISDN_NT#02: info element DISCONNECT
-- ISDN_NT#02: Disconnect case 2
-- CAPI queue frame: [ TYPE: Control (4) SUBCLASS: Busy (5) ] [ISDN_NT#02]
== ISDN_TE2#02: Setting up DTMF detector (PLCI=0x102, flag=1)
FACILITY_REQ ID=001 #0x4e9b LEN=0023
Controller/PLCI/NCCI = 0x102
FacilitySelector = 0x1
FacilityRequestParameter = <01 00>P<00>P<00 00 00>
== ISDN_TE2#02: Setting up echo canceller (PLCI=0x102, function=1, options=4, tail=0)
FACILITY_REQ ID=001 #0x4e9c LEN=0024
Controller/PLCI/NCCI = 0x102
FacilitySelector = 0x8
FacilityRequestParameter = <01 00 06 04 00 00 00 00 00>
== ISDN_NT#02: CAPI Hangingup for PLCI=0x203 in state 2
-- ISDN_NT#02: activehangingup (cause=16) for PLCI=0x203
DISCONNECT_B3_REQ ID=001 #0x4e9d LEN=0013
Controller/PLCI/NCCI = 0x60203
NCPI = default
ISDN_NT#02: wait for DISCONNECT_B3_CONF
FACILITY_CONF ID=001 #0x4e9b LEN=0019
Controller/PLCI/NCCI = 0x102
Info = 0x0
FacilitySelector = 0x1
FacilityConfirmationParameter = <00 00>
> ISDN_TE2#02: DTMF conf(PLCI=0x102)
DISCONNECT_B3_CONF ID=001 #0x4e9d LEN=0014
Controller/PLCI/NCCI = 0x60203
Info = 0x0
ISDN_NT#02: found and signal for DISCONNECT_B3_CONF
DISCONNECT_B3_IND ID=001 #0x1e2e LEN=0015
Controller/PLCI/NCCI = 0x60203
Reason_B3 = 0x0
NCPI = default
DISCONNECT_B3_RESP ID=001 #0x1e2e LEN=0012
Controller/PLCI/NCCI = 0x60203
DISCONNECT_REQ ID=001 #0x4e9e LEN=0018
Controller/PLCI/NCCI = 0x203
AdditionalInfo
BChannelinformation = default
Keypadfacility = default
Useruserdata = default
Facilitydataarray = default
SendingComplete = default
ISDN_NT#02: cond signal received for DISCONNECT_B3_CONF
== Spawn extension (macro-incomingfax, s, 2) exited non-zero on 'CAPI/ISDN_TE2/280-307' in macro 'incomingfax'
> CAPI devicestate requested for ISDN_NT/280
> CAPI devicestate requested for ISDN_NT/280
== Spawn extension (macro-incomingfax, s, 2) exited non-zero on 'CAPI/ISDN_TE2/280-307'
== ISDN_TE2#02: CAPI Hangingup for PLCI=0x102 in state 2
-- ISDN_TE2#02: activehangingup (cause=16) for PLCI=0x102
DISCONNECT_CONF ID=001 #0x4e9e LEN=0014
Controller/PLCI/NCCI = 0x203
Info = 0x0
DISCONNECT_B3_REQ ID=001 #0x4e9f LEN=0013
Controller/PLCI/NCCI = 0x60102
NCPI = default
ISDN_TE2#02: wait for DISCONNECT_B3_CONF
FACILITY_CONF ID=001 #0x4e9c LEN=0022
Controller/PLCI/NCCI = 0x102
Info = 0x0
FacilitySelector = 0x8
FacilityConfirmationParameter = <01 00 02 00 00>
-- ISDN_TE2#02: Echo canceller successfully set up (PLCI=0x102)
DISCONNECT_B3_CONF ID=001 #0x4e9f LEN=0014
Controller/PLCI/NCCI = 0x60102
Info = 0x0
ISDN_TE2#02: found and signal for DISCONNECT_B3_CONF
ISDN_TE2#02: cond signal received for DISCONNECT_B3_CONF
> CAPI devicestate requested for ISDN_TE2/280
> CAPI devicestate requested for ISDN_TE2/280
DISCONNECT_B3_IND ID=001 #0x1e2f LEN=0015
Controller/PLCI/NCCI = 0x60102
Reason_B3 = 0x0
NCPI = default
DISCONNECT_B3_RESP ID=001 #0x1e2f LEN=0012
Controller/PLCI/NCCI = 0x60102
DISCONNECT_REQ ID=001 #0x4ea0 LEN=0018
Controller/PLCI/NCCI = 0x102
AdditionalInfo
BChannelinformation = default
Keypadfacility = default
Useruserdata = default
Facilitydataarray = default
SendingComplete = default
DISCONNECT_CONF ID=001 #0x4ea0 LEN=0014
Controller/PLCI/NCCI = 0x102
Info = 0x0
INFO_IND ID=001 #0x1e30 LEN=0017
Controller/PLCI/NCCI = 0x203
InfoNumber = 0x8
InfoElement = <80 90>
INFO_RESP ID=001 #0x1e30 LEN=0012
Controller/PLCI/NCCI = 0x203
-- ISDN_NT#02: info element CAUSE 80 90
INFO_IND ID=001 #0x1e31 LEN=0015
Controller/PLCI/NCCI = 0x203
InfoNumber = 0x805a
InfoElement = default
INFO_RESP ID=001 #0x1e31 LEN=0012
Controller/PLCI/NCCI = 0x203
-- ISDN_NT#02: info element RELEASE COMPLETE
DISCONNECT_IND ID=001 #0x1e33 LEN=0014
Controller/PLCI/NCCI = 0x203
Reason = 0x3490
DISCONNECT_RESP ID=001 #0x1e33 LEN=0012
Controller/PLCI/NCCI = 0x203
> ISDN_NT#02: CAPI INFO 0x3490: Normal call clearing
== ISDN_NT#02: Interface cleanup PLCI=0x203
INFO_IND ID=001 #0x1e34 LEN=0020
Controller/PLCI/NCCI = 0x102
InfoNumber = 0x29
InfoElement = <06 0b 18 0f 00>
INFO_RESP ID=001 #0x1e34 LEN=0012
Controller/PLCI/NCCI = 0x102
-- ISDN_TE2#02: info element Date/Time 06/11/24 15:00
INFO_IND ID=001 #0x1e35 LEN=0015
Controller/PLCI/NCCI = 0x102
InfoNumber = 0x804d
InfoElement = default
INFO_RESP ID=001 #0x1e35 LEN=0012
Controller/PLCI/NCCI = 0x102
-- ISDN_TE2#02: info element RELEASE
DISCONNECT_IND ID=001 #0x1e37 LEN=0014
Controller/PLCI/NCCI = 0x102
Reason = 0x3490
DISCONNECT_RESP ID=001 #0x1e37 LEN=0012
Controller/PLCI/NCCI = 0x102
> ISDN_TE2#02: CAPI INFO 0x3490: Normal call clearing
== ISDN_TE2#02: Interface cleanup PLCI=0x102